Installing CCM on DL 380 G3/G2 with dual PIII or Dual Xeon

Hi NetPros,
I am planning to buy and install CCM 4.X or higher version on HP/Compaq DL 380 or DL 320. when i looked at the Cisco Approved Hardware requirements sheet i found the model that i am planning to buy... with dual PIII or dual Xeon on DL 380 G3. The Cisco document says
"DL380-G2 is a robust server solution designed for Cisco Unified Communications software
applications. Up to 7500 IP phones can be supported on a single server running Cisco
CallManager 3.3 or later. The required processors are dual Intel Pentium III 1.4-GHz processors. No specific memory configuration is required as long as 2 GB of memory is achieved".
Just wanted to make sure with NetPro's before buying the server that i am able to install and practice myself on CCM 4.X or higher versions.
Also, wondering.. Is DL 360 is also on the approved list ??? and is it possible to install CCM on it
Thanks in advance....

here you have the HW compatibility matrix
Supported Cisco Unified Communications Manager Releases by Server
http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
make sure the server meets the EXACT specs from
www.cisco.com/go/swonly
if the parts numbers are not a perfect match it won't do
HTH
java
if this helps, please rate

Similar Messages

  • Installing CCMS on a new system. System entry not found in RZ20CEN aftr reg

    Hi Guys,
    I am trying to install CCMS for our systems. I have made all the configurations as per the "Monitoring Setup Guide
    (CEN SAP Net Weaver7.0 SPS 13)" document and refered all the help.sap.com doc's for configuring ccms.
    I have registered the system with the CEN and I see the entry for my system in CEN in RZ21. but in RZ20 on CEN I donot see the entry for my system.
    Do I need to add this manually in RZ20? Or did I miss something. If some one has come  accross this plz help.
    Thanks
    Manmath

    Hi Kunal,
    That was very helpful. I awarded you the points.
    I had just done that when I received your reply.I refered to to the  thread
    CCMS CEN Configuration for SAP 4.6C version
    Now, I have added the system to the new monitor set.
    I want to use the templates provided by SAP to set up the alerts (monitor).
    There are templates like
    SAP CCMS Monitor Templates
    SAP CCMS Monitors for Optional Components
    SAP CCMS Technical Expert Monitors
    SAP CCMS Technical Operations Templates
    How can I use the template SAP CCMS Monitor Templates ?
    Thanks
    Manmath

  • Can CUCM 8.5 version be installed on a DL 380 G5 server in Virtual environment (Vmware Esxi 4.0 or 4.1)? Or does it have to be only installed in UCS boxes for VMware?

    Can CUCM 8.5 version be installed on a DL 380 G5 server in Virtual environment (Vmware Esxi 4.0 or 4.1)? Or does it have to be only installed in UCS boxes for VMware?
    1. If the installation is possible for the Vmware instance on a DL 380 G5/G6 server , will that be supported by Cisco ?
    Similary is the case with CUIC 8.5. Has anybody worked on these do suggest ideas.

    Virtualized UC applications from Cisco are only supported on the UC on UCS platform using ESXi 4.0, 4.0 Update 1, or 4.1 - hypervisor support may vary based on application.
    Hailey
    Please rate helpful posts!
    Sent from Cisco Technical Support iPhone App

  • Install CCMS on DB servers

    Team,
    We have installed CCMS agents on both ABAP and JAVA systems using the executables sapccm4x and sapccmsr.
    Now we would like to install CCMS agents on DB servers to capture the performance metrics of DB system.
    I have done the below steps
    1.Logged in to DB server,updated the SAPCCM4X and copied the csmconf file to /usr/sap/<SID>/log/sapccm4x directory
    2.Installed the agent using sapccm4x -R pf=<profile path>
    Even since the registration is succesful.I'm unable to capture the metrics for that particular system in RZ20.
    I would like to confirm is it the same procedure used for configuring CCMS in ABAP and JAVA systems using sapccmsr and sapccm4x or its a different procedure.
    Regds,
    Satyanarayana N.

    Team,
    I'm facing a differnet issue now..when I register my databse system using sapccmsr -R pf=<profile path>/<instance profile>
    I get the below error
    INFO: use SAPLOCALHOST vchrapp01
    INFO: CCMS agent sapccmsr working directory is /usr/sap/tmp/sapccmsr
    INFO: CCMS agent sapccmsr config file is /usr/sap/tmp/sapccmsr/csmconf
    ERROR: Can not create/open configuration file /usr/sap/tmp/sapccmsr/csmconf.
    EXITING with code 1
    Please let me know your suggestions if anyone has come across this sort of problem.
    Regds,
    Satyanarayana N

  • Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

    Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
    bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
    bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
    bash-3.00$ ./irca.sh
    Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
    (c) Copyright 2006 Oracle Corporation. All rights reserved.
    ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
    Please verify that the ORACLE_HOME is set correctly.
    bash-3.00$

    Hi Craig,
    Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
    So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
    Section :- Oracle Application Server 10g Release 3 (10.1.3)
    Regards,
    Praaksh.

  • Install Solution Manager in RedHat Enterprise 6 with Oracle 11

    Hello ,
    In the marketplace-PAM,  RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
    Does anyone have any information on this subject?
    Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
    tks

    Yes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
    Note 1565179 - SAP software and Oracle Linux
    Thanks

  • I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
    Mylenium

  • Since installing mountain lion i have a problem with mail. when i delete a message close  and open mail the message has come back. please help!

    Since installing Mountain Lion i have a problem with Mail. I delete a number of messages from the same person but keep the newest message in my Inbox. I actually delete them from the Trash. The next time i open Mail the deleted messages are back again. Can anybody please help as this is getting annoying. Thanks in Anticipation.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

  • How can I install Photoshop CS5 on a new iMac with no disc drive

    How can I install Photoshop CS5 on a new iMac with no disc drive?

    Hi,
    Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
    Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
    Please let me know if it helps.
    regards,
    Abhijit

  • How can i install google maps on an iphone 3gs with latest os

    how can i install google maps on an iphone 3gs with latest os

    Actually Apple has developed its own maps and no more have it in sync with google as it did before so now apple has its own mapping software.
    http://www.nytimes.com/2012/09/20/technology/apple-ios-6-leaves-out-googles-maps .html?_r=0

  • How do I go about getting the product serial number to register my product as well as install my product.  I bought it with a product box.  On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

    How do I go about getting the product serial number to register my product as well as install my product.  I bought it with a product box.  On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid.  When I tried to type this in for registration, it does register as this numbers also contain letters in it.  Apparently the registration boxes accept numbers only.  What do I do with a useless product for which I have paid good money for it?????

    This is the simple solution which was offered to me when I tried to get the serial code on line.
    The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
    I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
    This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
    I is really frustrating, spending the last two hours trying to get my product going....

  • I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

    I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

    I found this very good
    http://ipadhelp.com/ipad-help/iphone-ipad-apps-stuck-waiting/

  • When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    Try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • HT3546 I can't figure out how to install bonjour from the CD that came with my airport express.  Can anyone help?

    I can't figure out how to install bonjour from the CD that came with my airport.  Can anyone help?

    If you are having difficulties installing Bonjour from the Installation CD, you can download the latest version of Bonjour from here.

  • I had an early version of photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older photoshop?

    I had an early version of Photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the Photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older Photoshop?

    I think you mean Photoshop CS2.  Photoshop 2 is from around 1992.  The old Adobe activation servers were taken down. CS2 is about a decade old Adobe made a new download for old customers that legal customers can download and install. Download Acrobat 7 and CS2 products

Maybe you are looking for