Installing CE on same host  where EP7 is already installed.

Hi,
I am new to CE.
we have a EP7 SP 18  (Single Stack-->Java )system installed and it is runnig fine.
Now i want to install Netweaver CE 7.1 on the same Box.
Is it possible and advisible ?
if any one has done this please share your thoughts/Experince.
Also if we can use the same Database for both installations or we have to have separate Database
also ?
Regards
Rajendra

Hi ,
        You can install CE on same host  where EP7 is already installed .I dont think it going to make any diffrence other than listener.So you can choose the different listener port during installation of CE .
         Its never recomended to use same database for different systems.Its going to increase your administrative effort if you will use same DB .Anyways when you install CE in that case it will install its own database .
      Hope this will clarify your doubt.
Thanks..
Mohit

Similar Messages

  • Installing OAS 10.1.3 and Database 10.2 on same host

    I am trying to install 10g R2 and OAS 10.1.3 on same host(linux 2.6.9.-11.ELS). Database installation went fine but OAS is not coming up. Netstat shows all the ports are used. I followed all the instructions for Database and OAS. Is this a 2 tier configuration? Where can i find the OAS system error logs?
    Thanks in advance.

    Hi,
    I've a couple of questions for U;
    Which kind of installation of the IAS u did (Mid or Infra & mid)?.
    Did U install the IAS on a different file system than the DB?
    Ok. U 've a different places for the IAS log files, most important thing is that
    under /opmn/logs.
    To see the status of your ias process
    just login as ias owner with the right environement variables
    on the prompt type in
    #opmntctl status
    if some of your processes 're not alive, U can start it as following:
    # opmnctl startproc process-type= (process-type)
    U can stop & start all your opmn processes by type
    # opmnctl stopall of startall
    To start iasconsole
    # emctl start iasconsole
    've a nice day
    Regards,
    Hamdy

  • Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?

    As far as I remember 10.1.2.2 was not supporting installation of multiple OID on the same host?
    Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?
    TIA

    Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
    Please don't consider this plan for production instances!
    Thanks,
    Hussein

  • Can I install 8 on the same machine where I have 7?

    Can I install app server 8 on the same machine where I have app server 7 installed already? Are there any conflicts that I need to be aware of?

    Yes, you can install both 7 and 8 on the same system - you simply have to specify different installation location (and different set of port numbers if you plan to use both installations at the same time).
    You can also use upgrade tool which is shipped with release 8 to migrate your server configuration and deployed applications from the old installation into the new installation. See installation guide for more details on this:
    http://docs.sun.com/source/817-6083/upgrade.html

  • Dear Sir or Madam, I installed Window 8 on the same Notebook where a working version of DreamWeaver

    Dear Sir or Madam, I installed Window 8 on the same Notebook where a working version of DreamWeaver was installed. After then, when I start DreamWeaver I receive the Message: Activation limit reached”. What can I do? Thank You for your answer. Ovidio

    Before upgrading your Operating system, you have to de-activate and un-install the software.
    As you have just un-installed the software, your receiving the above error, please contact Phone Support or Live Chat for reset activation.
    However, you can install the Software on the third Computer by de-activating the Software from one of the older one and then install it on the new one so that you can avoid any error message while activating the Software.

  • SSO within an ABAP+JAVA on the same host

    Experts:
    We have a dual stack (ABAP+JAVA) NW04s on the same host.
    The usage type EP7 is enabled.
    From this EP7 we want to access its own ITS thru SSO.
    We configured the SSO just like we did for the EP7 + ECC on 2 different hosts.
    However, we are always asked for an ID/password when trying to test the SSO from the EP7.
    The error is:
    "SSO logon not possible; browser logon ticket cannot be accepted"
    Please advise. Points guaranteed. Thanks!

    hi,
    I also tried to do the same, but i think it's not possible.
    I read somewhere that SAP recommends to use different instances of ABAP and Java. I installed seperate ABAP and Java instances on the same host and then configured SSO using the Configuration Wizard in NWA configuration. and it works perfectly.
    regards,
    Ankur

  • Same Host Machine

    Hi All,
    I have a doubt regarding integration of APEX with BI Publisher.
    Is the APEX and BI Publisher has to be installed in a same machine(i.e Same host) for integration, or it can be in a different host machine.
    Since my APEX is in one machine and BI publisher is in other machine.
    If it is in different machine it is possible to integrate between these two.
    Otherwise, it is strictly recommended the inorder to integrate BI publisher with APEX means, then the both has to be in a same machine.
    Regards,
    Mini

    Hi jari,
    Thanks for the reply, you mean that BI publisher has to be installed where the database is installed,
    Since i have APEX with a database in one machine, and i have BI publisher not in the APEX database it is entirely in the another machine.
    <li> I have APEX with DB in linux and BIP in windows server 2003.
    <li> I have also made changes under the instance settings like specifying the printer server address etc.
    Now what is the error it is returning means jari
    ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.Regards,
    Mini

  • Performance - Oracle 11.2 on same host with Virtual OS

    Hi there,
    a colleague of mine raised some doubts on installing Oracle database 11.2 on the same host server where multiple Virtual Box guest instances are running.
    He pointed that threads allocation and consequently performance could be unbalanced.
    Database server is not for production but it must supply its services for about 20 enterprise applications, so I do not expect to serve thousands of requests but definitely complex queries.
    Considering these points, does it make sense what he's said?
    Where can I find more information about Oracle DB 11.2 threads allocation?
    thanks in advance
    The host server is a DELL with two sockets Intel® Xeon® E5520, 2.26Ghz, 8M Cache, 5.86 GT/s QPI, Turbo, HT, 1066MHz Max Memory
    RAM
    RAM 24GB Memory for 2 CPUs, DDR3, 1333MHz
    (12x2GB Dual Ranked UDIMMs)
    OS RedHat 5.3

    Alessandro Ilardo wrote:
    Hi there,
    a colleague of mine raised some doubts on installing Oracle database 11.2 on the same host server where multiple Virtual Box guest instances are running.
    He pointed that threads allocation and consequently performance could be unbalanced.
    Database server is not for production but it must supply its services for about 20 enterprise applications, so I do not expect to serve thousands of requests but definitely complex queries.
    Considering these points, does it make sense what he's said?
    Where can I find more information about Oracle DB 11.2 threads allocation?
    thanks in advance
    The host server is a DELL with two sockets Intel® Xeon® E5520, 2.26Ghz, 8M Cache, 5.86 GT/s QPI, Turbo, HT, 1066MHz Max Memory
    RAM
    RAM 24GB Memory for 2 CPUs, DDR3, 1333MHz
    (12x2GB Dual Ranked UDIMMs)
    OS RedHat 5.3If I understand what you are saying, then as far as the OS is concerned, the oracle rdbms is just another application alongside a virtual machine (or several virtual machines) process. I can't see where there should be any inherent conflict between them, except of course all processes running on any computer are competing for finite hardware resources. Typically you'd want the database server to be dedicated to running the database.

  • TDE Wallets & Multiple Databases on same Host

    The Oracle TDE Best Practices (doc ID 130696) states this:
    Multiple databases on the same host
    If there are multiple Oracle Databases installed on the same server, they
    must access their own individual TDE wallet. Sharing the same wallet between independent instances is not supported
    and can potentially lead to the loss of encrypted data.
    If the databases share the same ORACLE_HOME, they also share the same
    sqlnet.ora file in $TNS_ADMIN . In order to access their individual wallet, the
    DIRECTORY entry for the ENCRYPTION_WALLET_LOCATION
    needs to point each database to its own wallet location:
    DIRECTORY= /etc/ORACLE/WALLETS/$ORACLE_UNQNAME
    The names of the subdirectories under /etc/ORACLE/WALLETS/ reflect
    the ORACLE_UNQNAME names of the individual databases.
    If the databases do not share the same ORACLE_HOME, they will also have their individual sqlnet.ora
    files that have to point to the individual subdirectories.
    What is the correct sqlnet.ora syntax to do this?  I currently have what is below but it doesn't seem to be correct:
    ENCRYPTION_WALLET_LOCATION =
      (SOURCE = (METHOD = FILE)
      (METHOD_DATA =
      (DIRECTORY = /local/oracle/admin/wallet/DB#1)
      (DIRECTORY = /local/oracle/admin/wallet/DB#2)

    Hi,
    You can check this :Setting ENCRYPTION_WALLET_LOCATION For Wallets Of Multiple Instances Sharing The Same Oracle Home (Doc ID 1504783.1)
    i haven't done this for multiple database, but as per Doc you can use the syntex like
    ENCRYPTION_WALLET_LOCATION =
      (SOURCE = (METHOD = FILE)
      (METHOD_DATA =
      (DIRECTORY = /local/oracle/admin/wallet/$ORACLE_UNQNAME)
    Whenever you set the Environmnet with
    export $ORACLE_UNQNAME=DB#1 
    it will choose the file from respective directory like  /local/oracle/admin/wallet/DB#1
    HTH

  • How can I get the updates for Photoshop CS5 to download to my new Macbook Pro where I have already installed CS5 from my original disk? I have tried many times over 2 days. I was able to successfully download the current version of Adobe DNG converter.

    How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!

    The Adobe auto updater is highly unreliable.
    You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
    Adobe - Photoshop : For Macintosh
    ~~~~~~~~~~~~~~~~~~~~~~
    Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

  • 2 mta in the same host

    hi,
    i'm trying to make some test with an antivirus. i have only one server i installed ims 5.2 (smtp at port 10026) with iDS 5.2 (port 389), and i installed another iMS in the same host but the smtp is at port 25, before i install the antivirus software i tried to make some test with the IMS.
    both iMS share the Directory Server.
    first i send an email at port 25 then the server send the message at port 10026 in the same sarver (i saw the logs and it did it) but in the instance that use the port 10026 only enqueue the mail, does anybody have any idea of what is going on!, maybe the things i'm testing are wrong. ....
    When i run the ./msg-stop smtp in the instance that use the port 25 then the instance with the port 10026 delivery the enqued mail..

    thanks for your answer..
    i read the documentation that you send,
    but the documentation of the antivirus say that needs two mta to make a special configuration, the thing is the doc say that needs 3 servers:
    1 mta/IN (pto 25)
    1 server AV (100025)
    1 mta (pto 10026)
    the thing is that i only have one server, and i'm trying to do the same configuration with my server..
    The people that sell the Av software said that they can do the same configuration in one server but using like mta Postfix.
    i'm tryin doing the same with IMS.

  • Using the Log Viewer for two systems on same host

    We have two Portal systems installed on the same host server.  The log viewer only identifies and displays the log files from one of the systems (A).  This is the case even though I started the log viewer while logged on as the <sid>adm for system (B).
    In the configuration of the Log Viewer, I do not see an option to have it add another "system" to the local host.
    How can I configure the log viewer to display logs from both systems installed on the same host?
    Thanks,
    Bob

    Bob,
    with the port you can distinguis between the servers. both portals should have unique ports on the same server.
    for you relevant is the P4-port.
    these settings work for remote servers:
    Name: <SID>
    Host name: <hostname of server>
    Port: <P4 Port, normally 5<SysNr>04>, you can check this at: http://<host>:<port>/sap/monitoring/SystemInfo under the Dispatcher infos
    Connection: J2EE
    User: <admin user>
    Password: <admin user password>
    kr, achim

  • Two databases in the same host.

    Hi Group,
    I have a doupt, It's possible that two databases with the same name, live in the same host, if they have different OracleHomes, and the SO users who were installed with are different? eg.
    SO user: oraqas
    OracleHome1 : /qas/u01/app/oracle/product/9.2.0
    BD: prdsia01
    SO user: oracle
    OracleHome2: /u01/app/oracle/product/9.2.0
    BD: prdsia01
    If not, what do you recommend?
    Thanks a lot

    It's possible that two databases with the same name, live in the same host,
    if they have different OracleHomes, and the SO users who were installed with are different? what is "SO users"?
    what is "BD: prdsia01"
    Yes, two Oracle databases with same ORACLE_SID can reside on same system as same time.
    The only restriction is that only one instance can be online at a time.

  • Two SAP systems in the same host "no files processing"

    Hello!
    I have two SAP Systems installed on the same host.
    If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
    <b>How can I set up this issue?</b>
    Thank you very much
    regards
    Thank you very much
    regards

    Hello!
    I have two SAP Systems installed on the same host.
    If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
    <b>How can I set up this issue?</b>
    Thank you very much
    regards
    Thank you very much
    regards

  • Multiple dialog instances on same host for different System

    Dear Sir,
    I install two dialog instances on same host ,one for DEV one for QAS.
    First I install dialog instance for DEV and startup with no error.
    Second dialog instance for QAS install with success end ,but can not start dispatchers.
    Service
    sapmsDEV     3600/tcp     # SAP System Message Port
    sapmsQAS     3601/tcp     # SAP System Message Port
    sapdp01s  4701/tcp  # SAP System Dispatcher Security Port
    sapgw01s  4801/tcp    # SAP System Gateway Security Port
    sapdp00       3200/tcp     # SAP System Dispatcher Port
    sapdp00s  4700/tcp # SAP System Dispatcher Security Port
    sapgw00       3300/tcp # SAP System Gateway Central Instance Port
    sapgw00s  4800/tcp # SAP System Gateway Security Port
    Disp_dev
    ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8716]
    ERROR => MsIAttachEx: NiBufConnect to sap-qas/sapmsQAS failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    ***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1549]
    Stderr
    D:\usr\sap\QAS\D01\work>ntscmgr start MSSQLSERVER -m sap-qas
    failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
    D:\usr\sap\QAS\D01\work>ntscmgr start SQLSERVERAGENT -m sap-qas
    failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
    It seem that first startup dialog instance already start MSSQLSERVER -m sap-dev and SQLSERVERAGENT -m sap-dev, so next instance can not start again ,and cause NICONN_REFUSED.
    Could someone help me?
    Thanks
    Regards,
    Matt

    It appears to be possible, at least in IDM 7.1
    The release notes and Installation guide reference a setting called waveset.serverId that you set in your application server startup script like so:
    -Dwaveset.serverId=Name
    This would allow each JVM to identify itself differently from any others running on the same physical server.
    I haven't tried this yet myself, so caveat emptor.
    Jason

Maybe you are looking for