Installing CF8.0.1 64 on Windows 2008 Serv

Does anyone have a set of instructions on installing CF8.0.1
64bit on Windows 2008 Server. I have tried on and off for the last
two weeks and have made no progress. The install goes great,
however the CF administrator component of the install fails with a
HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
coldfusion installation, however once CF 8.0.1 gets installed IIS7
appears to break. I've read the other thread in the forum and the
suggestions made there don't help or have already been done.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-72626
Error Code 0x800700c1
Most likely causes:
- IIS received the request; however, an internal error
occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
- IIS was not able to access the web.config file for the Web
site or application. This can occur if the NTFS permissions are set
incorrectly.
-IIS was not able to process configuration for the Web site
or application.
-The authenticated user does not have permission to use this
DLL.
-The request is mapped to a managed handler but the .NET
Extensibility Feature is not installed.
Things to try (from the error summary page)
- Ensure that the NTFS permissions for the web.config file
are correct and allow access to the Web server's machine account.
- Check the event logs to see if any additional information
was logged.
- Verify the permissions for the DLL.
- Install the .NET Extensibility feature if the request is
mapped to a managed handler.
- Create a tracing rule to track failed requests for this
HTTP status code.
Adobe in going to expect a $6700 check from me in another
week or so and the damn thing doesn't install to the point where
the demo's will run. Windows 2008 and IIS7 isn't that new and I
can't imagine that the number of people having done this is limited
to the one or two in this forum and that there is no technote avail
to us that have to depend on internet support and published
technotes that can document the installation procedure of CF 8.0.1
64bit on windows 2008.
It's the fourth of July and this is a fine place to be.
Happy 4th everyone!

Please see this link:
http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008

Similar Messages

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Install ODI 10g on 64 bit Windows 2008 server

Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
Edited by: user1137989 on Oct 27, 2010 10:51 PM

If you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
11g comes in 32 and 64 bit version .
32 bit version is
Oracle Data Integrator 11g (11.1.1.3.0)
for Microsoft Windows (x86)
64 bit version is .
Oracle Data Integrator Companion 11g (11.1.1.3.0)
for All Platforms
Hope this helps .

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Problem getting CF8 administrator to work on windows 2008 server

When I create a file helloworld.cfm in root folder and browse to http://localhost/helloworld.cfm, it renders cfoutput fine <cfoutput>#now()#</cfoutput> shows the correct date and time.
But, when I go to the CF Administrator and enter the password for the initial setup, I keep getting the following error. Anyone have any idea how to fix it? I have checked permission everything seems fine.
If there is no solution, then I am thinking of upgrading to CF 10. If I buy and upgrade from CF8 to CF10, can I do a fresh install on a new 2008 server, or do i need to have CF8 installed correctly first?
Server Error
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
500
ROOT CAUSE: java.lang.IllegalArgumentException at coldfusion.filter.FormScope.parseQueryString(FormScope.java:321) at coldfusion.filter.FormScope.parsePostData(FormScope.java:293) at coldfusion.filter.FormScope.fillForm(FormScope.java:243) at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:430) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
javax.servlet.ServletException: ROOT CAUSE: java.lang.IllegalArgumentException at coldfusion.filter.FormScope.parseQueryString(FormScope.java:321) at coldfusion.filter.FormScope.parsePostData(FormScope.java:293) at coldfusion.filter.FormScope.fillForm(FormScope.java:243) at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:430) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

For CF 8 : Enable the built-in port in jrun.xml like this : (C:\ColdFusion8\runtime\servers\coldfusion\SERVER-INF)



<service class="jrun.servlet.http.WebService" name="WebService">
    <attribute name="port">8500</attribute>
    <attribute name="interface">*</attribute>
    <attribute name="deactivated">false</attribute>
For CF 10 :
The installer of CF 10 is indepedent of CF 8.
If you want to keep both CF 8 and CF 10 on the same server, then yes it is possible.
If you just want CF 10, then you can uninstall CF 8 and install CF 10.
However if you want to keep CF 10 only and migrate all CF 8 settings to CF 10 then make sure that when you install CF 10, the service of CF 8 should be running. At the end of CF 10 install, you will be asked : Do you want to migrate all the CF 8 settings to CF 10? Say yes and all CF 8 settings should be migrated to CF 10
HTH
Thanks
VJ

Cannot install JDK 1.4.2 on Windows 2008 Server

Hello,
I am trying to install JDK 1.4.2, but I get this error message:
"Internal Error 2902. ixoFileCopy"
I tried serveral versions (JDK 1.4.2_15, 1.4.2_19, 1.4.2_18, ...) but I get always the same error.
It is a fresh Windows Server 2008 installation (not 2008 R2), and I need JDK 1.4.2 for NW 7.01 installation.
Any help is welcome!
Best Regards,
Holger

Hello,
I found the solution, see [SAP Note 1230512 - Ende des Produktlebenszyklus von Sun J2SE 1.4.2|https://service.sap.com/sap/support/notes/0001230512]
I did not download the Java for Business Version. With this verions and Patch 27 it works....
Best Regards,
Holger Slomka

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

CF9 install on Windows 2008 Server R2

Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032

Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl.

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

Install windows 2008 server r2 as a vm on windows 8.1 pro

I am trying to install windows 2008 server r2 as a vm on an asus I7 4th gen. on windows 8 pro. It goes
thru the install untill completing install and gives error the computer restarted unexpectedly or encountered an unxpexted error windows installation cannot proceed click ok to restart. I do the shift f10 and change the registery to force finsh the install.
It boots up but when I try to do anything. It goes into netio.sys BSOD issue

I haven't run into that problem, but when setting up the OS, just
remove the NIC from the settings, do the install, make sure it's running, then install the integration
services, reboot, then add the NIC back in.
You could also use a legacy network adapter if that doesn't work.
In any case I'm trying an install of Win2008R2 right now so I can see if I get the same problem...
Bob Comer Microsoft MVP -- Hyper-V

How to install EBS 11.5.10.2 on windows 2008 Server

Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11

See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications.

Install Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit

Hi All,
Good Morning. I am working as Oracle APPS DBA. I had a requirement for installing Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit machine.
I need this Application server for Vertex O-Series which is working with SQL Server as the database.
Can any of you guys help me in providing the document or steps in order to install this application server?
1. Pre-Requisties steps
2. Installation
3. Post steps
I apperciat your help in this.
Thanks,
Srinivas.

Hello.
We are at the same point too.
Anybody here install the Vertex O series 6 running on the Java Stack? if so, what NW release and what component?
We are currently running an older version on SAP NW640 JAVA with no issue, and I am making the assumption the new Vertex would be running on the same SAP java AS for 7*... maybe not?
The install documents from Vertex say the requirement for SAP is:
"SAP NetWeaver 7.1 with Service Pack 3 or higher" and I see that there is only 7.1 for PI and Mobile.
(Maybe they mean SAP NW 7 SP3?)
We did ask Vertex, the company, about running this on the java app and they wrote:
"Netweaver 7.1 is currently supported for deployment of O Series 6.0. Versions 7.0 and 7.3 of Netweaver are not supported.
O Series 6.0 is supported for use with Java 1.5 and Java 1.6. "
Thanks for your help. And I will post here again if I find my answer.

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Install error 11gR2 on Windows 2008 Server R2

Hello,
I have a question about an installation error I received on Windows 2008 Server R2 while trying to install the 11g R2 on an test machine. I had downloaded both cd's and extracted them and copied the first cd into an new directory and then tried to copy the second cd into this directory, unfortunately I didn't saw that this step failed. As I started the installation I first didn't saw any error, later the installer brought some exceptions due to missing files (oc4j, context).
I then copied the second cd again (this time it worked) and continued with the installer until it finished.
My question is now, as there are some files missing, do I have the possibility to reinstall the software and which is the best way? Must i first uninstall the software and install it again or does it work if i start the installation (i select only software) again selecting the existing ORACLE_HOME so that the installation is overwritten.
I hope you can help me with an solution for this.
Many thanks in advance to all for your help.
Regards
Luis

Hi,
If in one oracle home you have a successful installation, oracle will automatically deny the installation of a new software in this existing home. If you have a filed installation in some oracle home, then later you can install in the same directory as oracle does not consider this failed installation as a proper oracle home hence it overwrites everything. Even you can't uninstall this failed installation because as i told you that this is not considered an oracle home. but, better way is to run installer and see whether you have an oracle home registered in the directory in which you want to install again and if you find one, then do a deinstall. If you don't see this directory as oracle home, then still better to delete what ever is inside this directory and do the installation.
Under current scenario, your installation is fine and you should not worry.
Salman

Installing CF8.0.1 64 on Windows 2008 Serv

Similar Messages

Maybe you are looking for