Installing client 8.1.7 on AIX 5.2

Especifically i need the pre compilers of C and Cobolo runing fine... but im facing an
make: 1254-002 Cannot find a rule to create target
error during install.
Can anyone give me a hand please?
Best Regards.

Hi,
From certification matrix :
8.1.7 on AIX 5L Information
o AIX 5L introduces the option to run the kernel in 64-bit mode. This new mode is supported. Please refer to MetaLink note 231901.1
o Warning about missing "crash" during installation of Oracle 8i.
The error message "crash: not found" may appear during execution of rootpre.sh on AIX 5L. This warning may be ignored. Alternatively, the warning can be avoided by creating the following script and renaming it to "/usr/sbin/crash":
#!/bin/ksh
read input
if [ X"$input" = Xle ]; then
echo lke | /usr/sbin/kdb | \
/usr/bin/awk '/^ *[0-9]+/ {printf("LoadList entry at 0x%s\n  Name:
            %s\n\n",$2,$6)}
fi
Nicolas.

Similar Messages

  • Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

    Hi,
      I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
    The Remote Desktop administrator software does not match the installed client software version.
    I tried removing the application and reinstalling it to no avail.  Any suggestions?
    Thanks.
    -David J. Eisen

    Hi coold88!
    I have an article for you that addresses your issue:
    Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
    http://support.apple.com/kb/HT3596
    You will want to make sure you have the latest version of the software as well:
    About Apple Remote Desktop 3.7
    http://support.apple.com/kb/HT5896
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Error while Installing NW701 EHP1 JAVA Only on AIX/DB2 UDB

    Hi All,
    While Installing NW701 EHP1 JAVA only on AIX/DB2 UDB platform I am getting below erron in Update Database Registry Step.
    Previously system was installed with DB29.1 patch level 7 whiach was wrong. Then I have uninstalled SAP and cleaned all the mounted directories related to SID. After that I stsrted again and getting below error.
    The step UpdateDB2Registry with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_UpdateDb2Registry|ind|ind|ind|ind|13|0|UpdateDB2Registry was executed with status ERROR .
    Imediate response would highly appreciated and rewarded.
    Best Regards
    Devendra

    Hi,
    Check file system characteristics, it should be created with read and write only. Please make sure that file system should not be created with cio option.
    Thanks
    Sunny

  • Can't install client on one computer

    This is a new Lenovo ThinkPad with Windows 8.1 Professional. Our SCCM 2012R2 has successfully installed clients on hundreds of our computers. It doesn't work on this one. Also, manual installation fails. the push client installation always creates this
    error message, immediately:
    Summary of client push installation
    Resource ID: 2097152820
    Object name: LT008806
    Include domain controllers: No
    Always install (repair or upgrade existing client): No
    Force uninstall and reinstall Configuration Manager client: No
    Total resources selected to install the Configuration Manager client:  1
    Summary of client push installation resources
    Resources to be installed from site <UCH>: 1
     Error: Exception
    Errors
    The machine name for Resource ID '2097152820' cannot be retrieved from the database.
    Running manual installation at the client always fails also.
    Here is a partial log file for manual installation (a few initial log entries included, and then I jumped to the first "failed" message):
    <![LOG[==========[ ccmsetup started in process 144 ]==========]LOG]!><time="13:27:16.636+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X64]LOG]!><time="13:27:16.638+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="util.cpp:1837">
    <![LOG[Launch from folder C:\Client\]LOG]!><time="13:27:16.640+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="13:27:16.641+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:727">
    <![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="13:27:16.754+480" date="11-20-2014" component="ccmsetup" context="" type="1"
    thread="3296" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: "C:\Client\ccmsetup.exe" ]LOG]!><time="13:27:16.755+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:3590">
    <![LOG[Local Machine is joined to an AD domain]LOG]!><time="13:27:16.756+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="lsad.cpp:714">
    <![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="13:27:17.612+480" date="11-20-2014" component="ccmsetup" context="" type="2" thread="3296"
    file="ccmsetup.cpp:9838">
    <![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="13:27:17.613+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9887">
    <![LOG[State message with TopicType 800 and TopicId {6BFF76AB-0341-4ACB-9719-7B5754A210A5} has been sent to the FSP]LOG]!><time="13:27:17.641+480" date="11-20-2014" component="FSPStateMessage" context=""
    type="1" thread="3296" file="fsputillib.cpp:752">
    <![LOG[Downloading file C:\Client\ccmsetup.exe]LOG]!><time="13:27:18.644+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:5685">
    <![LOG[Downloading C:\Client\ccmsetup.exe to C:\WINDOWS\ccmsetup\ccmsetup.exe]LOG]!><time="13:27:18.645+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:5769">
    <![LOG[File download 16% complete (262144 of 1614520 bytes).]LOG]!><time="13:27:18.651+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[File download 32% complete (524288 of 1614520 bytes).]LOG]!><time="13:27:18.652+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[File download 48% complete (786432 of 1614520 bytes).]LOG]!><time="13:27:18.653+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[File download 64% complete (1048576 of 1614520 bytes).]LOG]!><time="13:27:18.655+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[File download 81% complete (1310720 of 1614520 bytes).]LOG]!><time="13:27:18.656+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[File download 97% complete (1572864 of 1614520 bytes).]LOG]!><time="13:27:18.657+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[File download 100% complete (1614520 of 1614520 bytes).]LOG]!><time="13:27:18.658+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmsetup.cpp:9185">
    <![LOG[Download complete.]LOG]!><time="13:27:19.540+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:5867">
    <![LOG[Running as user "AdminProschan"]LOG]!><time="13:27:19.560+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:1995">
    <![LOG[Detected 423823 MB free disk space on system drive.]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="util.cpp:628">
    <![LOG[Checking Write Filter Status.]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:2024">
    <![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296"
    file="ccmsetup.cpp:2051">
    <![LOG[SiteCode:         UCH]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:2076">
    <![LOG[SiteVersion:      5.00.7958.1000]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:2077">
    <![LOG[Only one MP https://SCCM2012.uchastings.local is specified. Use it.]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context=""
    type="1" thread="3296" file="ccmsetup.cpp:10080">
    <![LOG[Searching for DP locations from MP(s)...]LOG]!><time="13:27:19.561+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:11018">
    <![LOG[Current AD forest name is uchastings.local, domain name is uchastings.local]LOG]!><time="13:27:19.565+480" date="11-20-2014" component="LocationServices" context="" type="1" thread="3296"
    file="lsad.cpp:842">
    <![LOG[Domain joined client is in Intranet]LOG]!><time="13:27:19.565+480" date="11-20-2014" component="LocationServices" context="" type="1" thread="3296" file="lsad.cpp:1047">
    <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="13:27:19.565+480" date="11-20-2014" component="LocationServices" context="" type="1" thread="3296" file="lsad.cpp:770">
    <![LOG[DHCP entry points already initialized.]LOG]!><time="13:27:19.569+480" date="11-20-2014" component="LocationServices" context="" type="0" thread="3296" file="ccmiputil.cpp:75">
    <![LOG[Begin checking Alternate Network Configuration]LOG]!><time="13:27:19.569+480" date="11-20-2014" component="LocationServices" context="" type="0" thread="3296" file="ccmiputil.cpp:1095">
    <![LOG[Finished checking Alternate Network Configuration]LOG]!><time="13:27:19.573+480" date="11-20-2014" component="LocationServices" context="" type="0" thread="3296" file="ccmiputil.cpp:1172">
    <![LOG[Adapter {B46CE415-DE46-4980-BE92-941C205DB66A} is DHCP enabled. Checking quarantine status.]LOG]!><time="13:27:19.578+480" date="11-20-2014" component="LocationServices" context="" type="0"
    thread="3296" file="ccmiputil.cpp:436">
    <![LOG[Adapter {B33663C9-A182-45CA-89B7-9BF56E6C1EAC} is DHCP enabled. Checking quarantine status.]LOG]!><time="13:27:19.579+480" date="11-20-2014" component="LocationServices" context="" type="0"
    thread="3296" file="ccmiputil.cpp:436">
    <![LOG[Adapter {C2A7018B-094C-40E3-9A9A-025A2CABF991} is DHCP enabled. Checking quarantine status.]LOG]!><time="13:27:19.579+480" date="11-20-2014" component="LocationServices" context="" type="0"
    thread="3296" file="ccmiputil.cpp:436">
    <![LOG[Adapter {BCFEB73A-A68F-4A7A-838E-C15717D89468} is DHCP enabled. Checking quarantine status.]LOG]!><time="13:27:19.579+480" date="11-20-2014" component="LocationServices" context="" type="0"
    thread="3296" file="ccmiputil.cpp:436">
    <![LOG[Adapter {52179116-5DB6-4077-93A9-CBE18178E8D3} is DHCP enabled. Checking quarantine status.]LOG]!><time="13:27:19.579+480" date="11-20-2014" component="LocationServices" context="" type="0"
    thread="3296" file="ccmiputil.cpp:436">
    <![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="UCH"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="uchastings.local"/>
        <Domain Name="uchastings.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.192.0.0" Address="10.199.167.81"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ']LOG]!><time="13:27:19.590+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="siteinfo.cpp:96">
    <![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{C32B31C6-F529-4F84-A752-C3950E6D96EE}</ID><SourceHost>LT008806</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:LT008806:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>https://SCCM2012.uchastings.local</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-20T21:27:19Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1142"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="13:27:19.590+480" date="11-20-2014"
    component="ccmsetup" context="" type="0" thread="3296" file="siteinfo.cpp:177">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="13:27:19.594+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmutillib.cpp:5479">
    <![LOG[CCM_POST 'https://SCCM2012.uchastings.local/ccm_system/request']LOG]!><time="13:27:19.596+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="httphelper.cpp:807">
    <![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="13:27:19.598+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmcert.cpp:4393">
    <![LOG[Certificate Issuer 1 [CN=uchastings-UCH-DC1-CA; DC=uchastings; DC=local]]LOG]!><time="13:27:19.598+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296"
    file="ccmcert.cpp:4409">
    <![LOG[Analyzing 1 Chain(s) found]LOG]!><time="13:27:19.633+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmcert.cpp:4447">
    <![LOG[Chain has Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.634+480" date="11-20-2014" component="ccmsetup" context="" type="0"
    thread="3296" file="ccmcert.cpp:4468">
    <![LOG[Chain has Certificate [Thumbprint 5E7E6A175628551C0CBD494124BBF33F85EE3C1E] issued to 'uchastings-UCH-DC1-CA']LOG]!><time="13:27:19.634+480" date="11-20-2014" component="ccmsetup" context="" type="0"
    thread="3296" file="ccmcert.cpp:4468">
    <![LOG[Based on Certificate Issuer 'uchastings-UCH-DC1-CA' found Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.636+480" date="11-20-2014" component="ccmsetup"
    context="" type="1" thread="3296" file="ccmcert.cpp:4489">
    <![LOG[Begin validation of Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.636+480" date="11-20-2014" component="ccmsetup" context=""
    type="1" thread="3296" file="ccmcert.cpp:1662">
    <![LOG[CRL check enabled. ]LOG]!><time="13:27:19.636+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmcert.cpp:1735">
    <![LOG[Verification of Certificate chain returned 00000000]LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmcert.cpp:1449">
    <![LOG[Completed validation of Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context=""
    type="1" thread="3296" file="ccmcert.cpp:1803">
    <![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmcert.cpp:4550">
    <![LOG[Begin to select client certificate]LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmcert.cpp:4706">
    <![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context=""
    type="0" thread="3296" file="ccmcert.cpp:4742">
    <![LOG[1 certificate(s) found in the 'MY' certificate store.]LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmcert.cpp:4770">
    <![LOG[Only one certificate present in the certificate store.]LOG]!><time="13:27:19.648+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="ccmcert.cpp:4774">
    <![LOG[Begin validation of Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.649+480" date="11-20-2014" component="ccmsetup" context=""
    type="1" thread="3296" file="ccmcert.cpp:1662">
    <![LOG[The Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local' has 'Client Authentication' capability.]LOG]!><time="13:27:19.654+480" date="11-20-2014" component="ccmsetup"
    context="" type="0" thread="3296" file="ccmcert.cpp:582">
    <![LOG[Completed validation of Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.654+480" date="11-20-2014" component="ccmsetup" context=""
    type="1" thread="3296" file="ccmcert.cpp:1803">
    <![LOG[>>> Client selected the PKI Certificate [Thumbprint E13F726510B5AD4A9E29626D22CB63A951DDC5CD] issued to 'LT008806.uchastings.local']LOG]!><time="13:27:19.654+480" date="11-20-2014" component="ccmsetup"
    context="" type="1" thread="3296" file="ccmcert.cpp:4850">
    <![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="13:27:19.722+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="httphelper.cpp:1972">
    <![LOG[Received header '<Msg SchemaVersion="1.1">
     <ID>{C6407ADB-689B-47E6-9692-01453FA04FC1}</ID>
     <SourceID>GUID:13C1127A-ADD4-4DC1-A7EC-593170E539C7</SourceID>
     <SourceHost>SCCM2012</SourceHost>
     <TargetAddress>direct:LT008806:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <Capabilities><Property Name="SSL" Version="1"/></Capabilities><ReplyCapabilities><AllowRegistrationReset>direct:SCCM2012:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>LT008806</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>https</Protocol><SentTime>2014-11-20T21:27:19Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="2822"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">SCCM2012;SCCM2012.uchastings.local;sccm2012.uchastings.local</Property><Property Name="MPSiteCode">UCH</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="13:27:19.723+480"
    date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="httphelper.cpp:1724">
    <![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="UCH" MasterSiteCode="UCH"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCM2012.uchastings.local/SMS_DP_SMSPKG$/UCH00003"
    Signature="<URL">http://SCCM2012.uchastings.local/SMS_DP_SMSSIG$/UCH00003"/><URL Name="http://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003"
    Signature="<ADSite">http://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSSIG$/UCH00003"/><ADSite Name="Default-First-Site-Name"/><IPSubnets><IPSubnet
    Address="10.192.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property
    Name="SSLState" Value="63"/></Capabilities><ServerRemoteName>SCCM2012.uchastings.local</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage
    FullPackageID="UCH00003" FullPackageVersion="4" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="1" ProgramEnabled="true"
    LastModifiedTime="30342396;2747718784" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>']LOG]!><time="13:27:19.724+480"
    date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296" file="siteinfo.cpp:221">
    <![LOG[Found local location 'https://SCCM2012.uchastings.local/SMS_DP_SMSPKG$/UCH00003']LOG]!><time="13:27:19.725+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296"
    file="siteinfo.cpp:351">
    <![LOG[Found local location 'https://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003']LOG]!><time="13:27:19.725+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296"
    file="siteinfo.cpp:351">
    <![LOG[Discovered 2 local DP locations.]LOG]!><time="13:27:19.726+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:11153">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="13:27:19.729+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmutillib.cpp:5479">
    <![LOG[PROPFIND 'https://SCCM2012.uchastings.local/SMS_DP_SMSPKG$/UCH00003']LOG]!><time="13:27:19.731+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="httphelper.cpp:807">
    <![LOG[Using DP location
    <time="13:27:21.010+480">https://SCCM2012.uchastings.local/SMS_DP_SMSPKG$/UCH00003']LOG]!><time="13:27:21.010+480" date="11-20-2014" component="ccmsetup" context="" type="0"
    thread="3296" file="ccmsetup.cpp:9887">
    <![LOG[State message with TopicType 800 and TopicId {2E64FF61-438A-42D7-8FD1-6934216E9A11} has been sent to the FSP]LOG]!><time="13:27:21.029+480" date="11-20-2014" component="FSPStateMessage" context=""
    type="1" thread="3296" file="fsputillib.cpp:752">
    <![LOG[Failed to download from DP 'https://SCCM2012.uchastings.local/SMS_DP_SMSPKG$/UCH00003', error 0x800704dd.]LOG]!><time="13:27:21.030+480" date="11-20-2014" component="ccmsetup" context="" type="2"
    thread="3296" file="ccmsetup.cpp:1377">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="13:27:21.034+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmutillib.cpp:5479">
    <![LOG[PROPFIND 'https://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003']LOG]!><time="13:27:21.035+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296"
    file="httphelper.cpp:807">
    <![LOG[Got 401 challenge Retrying with Windows Auth...]LOG]!><time="13:27:21.053+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="httphelper.cpp:1288">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="13:27:21.058+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmutillib.cpp:5479">
    <![LOG[PROPFIND 'https://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003']LOG]!><time="13:27:21.060+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296"
    file="httphelper.cpp:807">
    <![LOG[Using DP location <a href="https://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003]LOG]!><time="13:27:21.098+480">https://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003]LOG]!><time="13:27:21.098+480"
    date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:11395">
    <![LOG[Cost settings successfully set on '{FECEE05C-214A-42D1-8C52-09B7BC6C9F20}'.]LOG]!><time="13:27:21.106+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296"
    file="ccmutillib.cpp:5634">
    <![LOG[Failed to download client files by BITS. Error 0x800704dd]LOG]!><time="13:27:21.108+480" date="11-20-2014" component="ccmsetup" context="" type="3" thread="3296" file="ccmsetup.cpp:6618">
    <![LOG[Failed to download from DP 'https://SCCM2012.uchastings.local/NOCERT_SMS_DP_SMSPKG$/UCH00003', error 0x800704dd.]LOG]!><time="13:27:21.108+480" date="11-20-2014" component="ccmsetup" context="" type="2"
    thread="3296" file="ccmsetup.cpp:1377">
    <![LOG[Enumerated all 2 local DP locations but none of them is good. Fallback to MP.]LOG]!><time="13:27:21.108+480" date="11-20-2014" component="ccmsetup" context="" type="2" thread="3296"
    file="ccmsetup.cpp:11389">
    <![LOG[Cost settings successfully set on '{A0238A9F-2448-446A-92AB-105DA6B2F47E}'.]LOG]!><time="13:27:21.116+480" date="11-20-2014" component="ccmsetup" context="" type="0" thread="3296"
    file="ccmutillib.cpp:5634">
    <![LOG[Failed to download client files by BITS. Error 0x800704dd]LOG]!><time="13:27:21.118+480" date="11-20-2014" component="ccmsetup" context="" type="3" thread="3296" file="ccmsetup.cpp:6618">
    <![LOG[Deleted file C:\WINDOWS\ccmsetup\ccmsetup.xml]LOG]!><time="13:27:21.122+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:9493">
    <![LOG[CcmSetup failed with error code 0x800704dd]LOG]!><time="13:27:21.123+480" date="11-20-2014" component="ccmsetup" context="" type="1" thread="3296" file="ccmsetup.cpp:10879">
    Any ideas?  Thanks.
    Ron Proschan

    That was it!  It was a strange mix-up of accounts, where I was logging on with a "Microsoft" account that had the same name as an "organizational" domain account.  When I was logged on with the Microsoft account, I couldn't
    install the software.  When I logged on with the domain account, I could.  Thanks!!!
    Ron Proschan

  • How to install Oracle Real Application Clusters on Aix

    I am running a 64 bit kernel AIX 5.2 on IBM RISC Based p-series sever(7028-6C4).Clustered has already been configured. How can i check the clustered has configured successfully (software & hardware) for oracle installation?
    What is the procedure to install oracle real application custer on AIX ?
    Can Any body Help me......
    Arif

    Here you have books related to that theme:
    http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
    Joel Pérez

  • Issue installing PI 7.1 EHP1 on AIX,Oracle

    Hi Friends,
    I am installing PI 7.1 EHP1 on AIX,Oracle.Iam facing some issue during installation(25th phase of installation).
    I have 10 Gb RAM and 20 Gb SWAP.
    Do you have any idea?
    sapinst.log:
    13.10.2009 11:02:22
    GetProcessList
    FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
    INFO 2009-10-13 11:02:22.229
    Connect to message server (s0001079/3901) succeeded.
    INFO 2009-10-13 11:02:22.229
    Disconnect from message server (s0001079/3901) succeeded.
    WARNING[E] 2009-10-13 11:02:22.240
    CJS-30087  Instance XDN/SCS01 [PARTIAL] did not stop after 2:00 minutes. Giving up.
    ERROR 2009-10-13 11:02:23.421
    FCO-00011  The step stopInstance with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|stopInstance was executed with status ERROR .
    WARNING 2009-10-13 11:02:23.576
    Could not get property IDs of the JavaScript object.
    ERROR 2009-10-13 11:02:23.577
    FJS-00010  Could not get value for property .

    Hi Milos,
    The problem is with the starting of the SCS instance by sapinst, on AIX the port that we used (SAP default) 3901 during the input step for SCS was in usage at AIX by some application
    nimsh 3901/tcp # NIM Service Handler
    nimsh 3901/udp # NIM Service Handler
    I had to free up the port for some time, stop processes running on the port and then continued with my installation. After the installation was complete, I changed the port number of SCS to 3601 and gave the port back to AIX application.
    Beaware that you have to change the port number is various places, including Config tool, all the JSPM, Configtool properties
    Check if this helps to resolve your problem, else I will have to recollect if I resolved it differently.
    Regards,
    Nilesh

  • Installing 10.2.0.4 on AIX 6L with GPFS

    Can anyone help me in Installing 10.2.0.4 on AIX 6L with GPFS?
    Suggestions are appreciated.
    Thanks,
    Ravikanth

    Srini Chavali wrote:
    Pl elaborate on what you mean by GPFS
    Is there a reason you want to install a de-supported version ?
    Pl see the Install Docs -
    http://docs.oracle.com/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC
    http://docs.oracle.com/cd/B19306_01/install.102/b19075/toc.htm
    and this MOS Doc
    Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    HTH
    SriniLooks like it is a new (?) file system IBM makes available on AIX. I googled "gpf" and this was my first hit. General Parallel File System.

  • Error installing BOBJ 3.1 SP2 on AIX

    Hi,
    Has anyone tried installing BOE 3.1 SP2 on AIX successfully?
    I get an error..
    [error] Errcode 1: gzip -dc "/temp_cds3/PATCHES_DOWNLOADED/BOBJ_ENT_SP2/pkg/jdk00000.tar.gz" | /bin/tar xvfb - 1
    I checked the pkg directory and can't find the file jdk00000.tar.gz... is there something missing from the file sets?
    Thanks
    Jacques

    Hi,
    I stand corrected... the jdk00000.tar.gz file is there, but the error still occurs.
    Any one?
    Thanks
    Jacques

  • Issue installing Client 9.2.0.1

    Oracle rookie here having an issue installing Client 9.2.0.1....
    I've installed the client software on a few machines without any issue. Now, I am installing it on the passive node of a cluster (cluster is running SQL Server 2000) and there is a problem. The install was successful once, until I noticed it installed under D:\oracle\ora92. I needed to install it on C, because that's where I installed it on the active node. However, when I run the installer (C:\9.2.0.1 Client\autorun\autorun.exe), it does not allow me to change the path or the name. If I change the Path to be be C:\oracle\ora92, the name (OraName92, in this case) goes away. If I retype OraName92 in the name box, the path goes back to D:\oracle\ora92.
    I tried altering some ini files and that didn't work. I searched the registry and there are tons of references to the old install paths, but even changing some registry settings (specifically, HKLM\Software\Oracle\ORACLE_HOME and ORACLE_HOME_NAME) did not work. I didn't touch any other keys, but I did back up the registry.
    Anyone have any thoughts on how I can get this installed on C? Thanks...
    Peter

    Just for giggles, I tried altering the following registry key:
    HKLM\Software\Oracle\ALL_HOMES\ID0\Path
    The value used to be D:\oracle\ora92, and I changed it to C:\oracle\ora92. When I start the installer program, it picks it up as the value for OraHome92. I have nothing to lose by trying this, but my only question would be, will the installer overwrite the existing keys in the registry? I'm hoping that's what it will do, because I don't want any stray references to D:\oracle\ora92 lying around.
    If anyone knows anything about this, please let me know. Thanks for all your help!
    Peter

  • Unable to install sccm client from SCCM console install client option

    Hi
    Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely.
    We cannot enable push install. my id has full access on SCCM site server SCCM product also admin rights on workstations. I am able to access net bios path SMS_<site code> of site server then client path from client machine. machine is in domain and
    is boundry of sccm .
    Client push install in console is diabled
    Regards Sushain KApoor

    Hi!
    Examine the ccm.log located in <SCCM 2007 InstallationPath>\LOGS on the site server.
    Best regards
    Henrik

  • SCCM Collection with IE9 Installed Clients

    Hello ,
    I would like to create a Collection on SCCM with all IE9 Clients . Because some clients downloaded and install the stand alone version of IE9 and others get the IE9 from our WSUS ,
    i cant count the exact number of IE9 installed clients . i have tried a lot of queries but i didnt get the right results except from the computers which installed and registered the IE9 on Add/Remove Programs .
    The query for the collection is :
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID
    = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.Publisher = "Microsoft Corporation" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName = "Internet Explorer" and SMS_G_System_ADD_REMOVE_PROGRAMS.Version like "9"
    That query doesnt return all the computers with the Intenet Explorer 9 installed , just only the computers with stand alone installation .
    Any ideas ?
    Thanks a lot
    D.S.

    Yes, i do
    Are you able to see any details of installed softwares and add remove program details in Resource explorer in SCCM console?
    Anoop C Nair - This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not
    actually answer your question. This can be beneficial to other community members reading the thread.
    Sure ,  I can .
    Have you seen the note provided in the above post?
    Notes: To find the clients that have not yet installed IE 9, simply change "like" to "not like" when checking the file verison number. Also, if you see oddities in the memberships, keep in mind that this is based off of the .EXEs
    polled and listed in the SCCM database, so when in doubt, use Resource Explorer within the ConfigMgr console to see if the "iexplore.exe" file has been inventoried.
    Anoop C Nair - This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not
    actually answer your question. This can be beneficial to other community members reading the thread.
    Have you checked the below point ? If yes can you please share the screen shot ?
    use Resource Explorer within the ConfigMgr console to see if the "iexplore.exe" file has been inventoried.
    Anoop C Nair - This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not
    actually answer your question. This can be beneficial to other community members reading the thread.
    You mean the Resource Explorer from a client ? RightClick on Client ->Start->Resource Explorer ?
    I have enable the Software Inventory Client Agent on Clients from central site properties .

  • What is the best way to install client sccm 2012for all computer in my company

    in my company(25000 users) we have alot of branch(100-150 small Branch (every branch 50-100 users)) & 20 branch (100-100 users) .
    now only 11000 client in sccm2012
    What is the best way to install client for all computer
    Note that sccm 2012(1 primary site and 4 site system server every server (4 roles (management point  , Distribution Point  , site system , component server  ) ))
    and in boundaries i create boundaries but not for all branch and enable (boundary group for site assignment ) for every group 
    What is the best way to install client for all computer 
    thank u 

    You basically have 3 options, if you disregard a manual install.
    1. Client Push. Configure an account with local admin rights on the clients, and enable Site-Wide pushing of client.
    2. GPO. Import the GPO templates and enable the client to be installed that way
    3. Startup script.
    Of the 3, I usually go with a combination of client push and GPO.
    Take a look at http://technet.microsoft.com/en-us/library/gg712298.aspx for the complete documentation.
    FB

  • Error installing client via startupscript

    I'm having a problem with ConfigMgr 2012 R2 client installation. I'm trying to install client via startup script but it fails every time.  
    ccmsetup.log from client machine:
    <![LOG[==========[ ccmsetup started in process 4092 ]==========]LOG]!><time="16:08:18.288-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X64]LOG]!><time="16:08:18.381-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="util.cpp:1837">
    <![LOG[Launch from folder \\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\]LOG]!><time="16:08:18.646-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916"
    file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:08:18.755-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:727">
    <![LOG[Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:08:18.911-120" date="02-19-2014" component="ccmsetup" context="" type="1"
    thread="4916" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: "\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe" /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX]LOG]!><time="16:08:18.958-120" date="02-19-2014"
    component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context=""
    type="1" thread="4916" file="ccmsetup.cpp:3775">
    <![LOG[Command line: "\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe" /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX]LOG]!><time="16:08:19.020-120" date="02-19-2014"
    component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="0" thread="4916" file="ccmsetup.cpp:4425">
    <![LOG[CCMHTTPPORT:    80]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8617">
    <![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8632">
    <![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8650">
    <![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8668">
    <![LOG[Lookup MP:    XXXX.XXXX]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8702">
    <![LOG[FSP:    ]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8720">
    <![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8778">
    <![LOG[No MP or source location has been explicitly specified.  Trying to discover a valid content location...]LOG]!><time="16:08:19.036-120" date="02-19-2014" component="ccmsetup" context="" type="1"
    thread="4916" file="ccmsetup.cpp:4729">
    <![LOG[Looking for MPs from AD...]LOG]!><time="16:08:19.036-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:4737">
    <![LOG[Unexpected row count (0) retrieved from AD.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="3" thread="4916" file="lsad.cpp:636">
    <![LOG[GetADInstallParams failed with 0x80004005]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="3" thread="4916" file="ccmsetup.cpp:304">
    <![LOG[Couldn't find an MP source through AD. Error 0x80004005]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:4756">
    <![LOG[Current directory '\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install' is not a valid source location.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1"
    thread="4916" file="ccmsetup.cpp:4796">
    <![LOG[No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="3"
    thread="4916" file="ccmsetup.cpp:4806">
    <![LOG[Failed to parse '"\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe" /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX' with error 0x80004005]LOG]!><time="16:08:19.347-120"
    date="02-19-2014" component="ccmsetup" context="" type="3" thread="4916" file="ccmsetup.cpp:4611">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1"
    thread="4916" file="ccmsetup.cpp:9763">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='307' will not be sent.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1"
    thread="4916" file="ccmsetup.cpp:9763">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:10879">

    Hi,
    Looking for MPs from AD...
    Unexpected row count (0) retrieved from AD.
    No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.
    Failed to parse '"\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe"
    /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX' with error 0x80004005
    I guess you haven't published your SCCM site to AD.
    Here is an official article for your reference.
    Configuring Sites to Publish to Active Directory Domain Services
    http://technet.microsoft.com/en-us/library/hh696542.aspx. 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Install ERP 6.0 EHP5 With AIX DB2

    Good Morning:
    we will Install ERP 6.0 EHP5 With AIX DB2, please, notes and/or information about size of all file system, and tips for take into account
    Thanks
    vhms

    Hello Victor,
    Best way is to go through the Installation Guide thoroughly, every needed information and notes and tips as well are clearly mentioned in the guide.
    service.sap.com/instguides --> SAP Business suite --> SAP ERP --> SAP ERP 6.0 --> SAP enhancement packages for SAP ERP 6.0  --> SAP enhancement package 5 for SAP ERP 6.0 --> New Installation of SAP ERP 6.0 Enhancement Package 5
    Just do not skip this info -
    You can install a new system with SAP ERP 6.0 enhancement package 5. After the installation the technical usage "Central Application" is already installed
    After installation with 'central application' , you need to upgrade rest of the ecc components to EhP5. Read the Guide.
    Thanks

  • Cannot find real path for '/var/install/Client/DATA_UNITS/HDB_CLIENT_LINUX_X86_64/../install/sdbrun': No such file or directory

    Hi Experts,
    I got the error "cannot find real path for '/var/install/Client/DATA_UNITS/HDB_CLIENT_LINUX_X86_64/../install/sdbrun': No such file or directory" and "Error during execution of HdbCmdClazz section!" during SAP NW 740 HANA installation. I specified the right path for HDB client (see in attachment).
    Any ideas, please?
    Thanks & best regards,
    Sreenu

    The service file is in $srcdir, not $_svnmod/builders/cmake.
    You're using an outdated PKGBUILD template too. The svn source should be included in the source array and not checked out manually during the build process.
    EDIT: since this repository requires authentication, perhaps the correct format won't work.
    Last edited by WorMzy (2015-02-08 23:07:59)

Maybe you are looking for

  • Certificates delay

    Hi, I wrote my SAP HR Certification exam on 08 December 2006 in SA. Up to now SAPSA are saying they have not received the certificates. I have even left the country. How long does it take for SAP to print and send certificates after someone has passe

  • EDIFACT has a space missing

    Hi all.. If in my XI mapping output, I have a empty node then in the BIC mapping output i want a <SPACE> to come. For example if XI mapping is like this: <A1>200</A1> <A2/> Then i want the BIC output to be like 200: ' where ' is the segment delimeter

  • UNIWB and ACR 4.1 update (Nikon D200)

    I wonder if the use of "UNIWB" (= forcing 1.0 x amplification on red green blue channels in camera)still results in misinterpretation of the RAW image as multiple exposure when importing in camera raw into PSCS3. Cheers Walter

  • Why has my icloud photo stream stopped working on windows xp

    I am unable to photo stream through iCloud anymore I have done it recently but it has stopped working, I've updated everything but when the control panel comes up I keep getting a Runtime error from windows and icloud photos is not enabled when I try

  • How to reinstal maccbook OS

    How to reinstal OS in my Macbook.