Installing Clusterware 10.2.0.1 crashed the VM Host

Dear Experts..
I am facing a peculiar problem with my VM, while i try to install clusterware to it.
My host machine is OEL4 Update 6 and created 2 virtual machines on that server. When i am trying to launch clusterware installation in one of my VM it completes upto 93%(Copying to remote server completed) and after that machine goes down without any reason....
I would appreciate if anybody can give some suggestion to it....
thanks

What is the document you are using to configure your cluster? At what step are you encountering the problem? Is it the host that is crashing or is it one of the guest?
Please see if you are following steps in the document found at:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Message was edited by:
bhetaal

Similar Messages

SSO within an ABAP+JAVA on the same host

Experts:
We have a dual stack (ABAP+JAVA) NW04s on the same host.
The usage type EP7 is enabled.
From this EP7 we want to access its own ITS thru SSO.
We configured the SSO just like we did for the EP7 + ECC on 2 different hosts.
However, we are always asked for an ID/password when trying to test the SSO from the EP7.
The error is:
"SSO logon not possible; browser logon ticket cannot be accepted"
Please advise. Points guaranteed. Thanks!

hi,
I also tried to do the same, but i think it's not possible.
I read somewhere that SAP recommends to use different instances of ABAP and Java. I installed seperate ABAP and Java instances on the same host and then configured SSO using the Configuration Wizard in NWA configuration. and it works perfectly.
regards,
Ankur

Server 2012 R2 RDS- Only want the Session Host, Connection Broker and Licensing Server!

Hi all,
Wondering if anyone has experience with implementing Remote Desktop Services (RDS) on Windows Server 2012 R2.
I am doing an RDS design for a platform where we only need an RDS Session Host, Licensing Server and Connection Broker. We do not need web access as these servers will simply be jump boxes internally!
However, implementing this correctly in our test environment has proved to be tricky. The options are:
Use the Server Manager and do a traditional install via Roles and Features ( specifically add the Session Host, Licensing Server and Connection Broker). The installation process seems to go through ok in this scenario but when I head over to the Remote
Desktop Services section of the Server Manager I simply get the message 'An RDS Deployment does not exist in the server pool. To create a deployment head to Roles and Features'.
Use the specific ‘Remote Desktop Services installation’ option on the Server Manager and do a Session Based Desktop deployment and Quick Start. This installation process seems to go through correctly and the Remote Desktop Section seems to be working
correctly via the Server Manager. However this process is ‘hard locked’ i.e. it installs the session host, web access and connection broker. I can then remove the web access component later from Roles/ Features.
Is there a best practice (if any) for installation? i.e. Will there be any issues down the line if I remove RDS Web Access from my server while following method 2?
There is a complete lack of documentation from Microsoft here so not sure what to do! Just need a basic RDS session based deployment.

Hi,
As I know from server 2012\R2 the best deployment skill is to perform via “Remote Desktop Services” installation mode with Standard deployment and don’t let single role to install. Because when we install through RDS mode, there are specific extra tools and
services activated along with that deployment which you can’t find with single role installation. And that is for sure, when we install RDS role as of this, by default we will get install RDCB, RDSH and RDWA role installed.
Sorry don’t have any option to try to remove that role as that role basically needed for RemoteApp and Desktop purpose. But if you want then you can try it with help of “Remove-RDServer”Powershell command.
https://technet.microsoft.com/en-us/library/jj215506.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic inserted the tech tool DVD

working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic by inserting the tech tool DVD, wich produces the following highligted text:
panic(cpu 0 caller =xffff0003): 0x300 - Data access
latest stack backtrace for CPU 0:
Backtrace:
0x0009CC88 0x00D63C 0x00029DAO 0x000BOA10 0x000B4270
proceeding back via exception chain:
Exception state (sv=0x26acd700)
PC=0x2717E900; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x2717EBE4; R1=0x26AD3AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27178B0 0x00344ACB 0x00345970 0x2717EC08 0x2718458 0x00340590
0x003496EC 0x0034B59C 0x0034A6BC 0x000B1DD4
Kernel Loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWDHC1(3.9.5)00x2717c000->0x271aafff
dependency: com.apple.iokit.10PCIFamily(2.6)00x1e840000
dependency: com.apple.iokit.I0FireWireFamily(3.4.7)00x270dd000
Exception state (sv=0x26abd280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000;R1=0x00000000; XCP=0x00000000 (unknown)
BSD process name corresponding to current thread: kernel_task
so what
greetings from berlin

Greetings,
It appears to be a FW problem, possibly flaky case, or drive problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I have purchased adobe creative suit 3 and installed in my pc. my pc crashed and i tried installing the product in other pc. my serial number doesnt work anymore. what is the solution

i have purchased adobe creative suit 3 and installed in my pc. my pc crashed recently and i tried installing the product other pc. my serial number doesnt work anymore. what is the solution

Hello,
maybe you have to activate/deactivate first, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html >>> see "What is activation?" >>> Activation is the process ..."
Hans-Günter

After re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

after re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

dgrparker a écrit:
photoshop element 2.0 - on windows 7. the program ran fine on the old HD, but this error popped up when I re-installed it on the new HD
Elements 2.0 is an old version. The message may be due to the fact that your new HD is much bigger than your older one, and not due to the classical reasons:
http://www.easyelements.com/scratch-disk-is-full.html

I installed the latest Acrobat Reader (11) and every time I try to do a Save As, it crashes the entire Adobe program closing all files. I tried uninstalling and re-installing and it still crashes.

I installed the latest Acrobat Reader (11) and every time I try to do a Save As, it crashes the entire Adobe program closing all files. I tried uninstalling and re-installing and it still crashes.

Hi Bryan ,
It happens when you save it as an Adobe PDF or a normal PDF?
Happens with all the files or any specific one?
What exact version of Acrobat are you using?
Try updating it to the latest one if it is an older one.
You may also want to uninstall and re install it to check.
Let us know how it goes.
Regards
Sukrit Dhingra

I have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency. and I need to work on music not only in time but the

i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help please

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Why does firefox 7 crashes the system if Quadro NVS 135M graphics driver is installed?

Why does firefox 7 crashes the system with a Quadro NVS 135M graphics cards installed?
It happens immediately after opening Firefox on a two screen system. You get a message saying the Graphics Driver stopped responding, but that it managed to recover, but after a while the system freezes completely. You can't even CTRL+ALT+DEL.

I get this too on with my nVidia GTX460 card. In my case the screen goes black. It happens once every few days, and for a while I could not figure out why. I was forcing a shutdown to get the screen back.
But I put the computer to sleep and woke it up, since that restarts the video, and this let me see what was wrong. The only error message is it reports that Firefox hung. There is nothing else in the Event logs.
I'm running Windows 7 with all the updates from Windows Update, and my video driver is 285.62, but his also happened with the 260.26 driver.
I imagine this is happening a lot, but people aren't able to isolate the cause.
I'm looking for a fix, not a bypass.

Help! I'm trying to re-install Final Cut after my MacBook crashed but every time I enter the serial number the program refuses to acknowledge it. Anyone have a solution?

Help! I'm trying to re-install Final Cut after my MacBook crashed but every time I enter the serial number the program refuses to acknowledge it. Anyone have a solution?

Try here:
https://discussions.apple.com/message/7565627#7565627
Al

I installed Lion on my MacBook Pro and the Finder keeps quitting - how do i fix it?

I installed Lion on my MacBook Pro and the Finder keeps quitting - how do i fix it?
Worse, i can't force quit the finder and get it to relaunch - the command won't work.
Most of the Lion software also won't work - iTunes, Mail, iCal - and only some of the preferences work.
The message:
Finder quit unexpectedly.
Click Report to see more detailed information and send a report to Apple.
Won't go away no matter if i hit Ignore or Report...
I have no clue what to do...
Any help?

Does that happen if you boot into "safe mode"? Launch the Console utility and look for messages that might explain the problem. If you see a "crash report", post its contents here.

WIndows beta won't install / deinstall / repair after bookmark import crash

All,
after installing the first beta on my (international) Windows XP system, Safari crashed when importing Bookmarks.
It would not start thereafter.
I tried to de-install, which failed for some unnamed reason.
I now am unable to install beta 3.0.2, which aborts the installation process and instructs me to try later again.
Nothing, including none of the "repair" switches of msiexec, either removes the remains of the old Safari, nor allows me to install the new Safari.
Any help how I could force installation of the laters Beta, regardless of pre-requisites or checks?
Greetings,
- Thomas
Centrino Duo Windows XP Pro

Hi Thomas,
Ths installer cleanup tool is not the best as depending on your user rights on the system and a few other factors it will only show a subset of the programs installed (as you've found).
In order to perform a full cleanup (detailed repair) of Safari you can try this from a command prompt:
msiexec /fausmv {3F9EFA28-D2FE-44B7-8896-0B0FF8DF5517}
or to remove completely use:
msiexec /x {3F9EFA28-D2FE-44B7-8896-0B0FF8DF5517}
The top command tells Windows to Fix All files rewriting User files, Shortcuts, Machine files and rebuilding the Windows Installer Cache (the v option).
More detail can be found at Microsoft's website if you're interested: http://support.microsoft.com/kb/314881
Feel free to post any error messages you may receive. It might also be a good idea to update to the latest version of Windows Installer (3.1 v2) from: http://go.microsoft.com/fwlink/?linkid=84088
Having said all that, I cannot get Safari to even start once under Windows Vista ... It installs without event but when double clicked the disk does some whirring then the standard "Your application has crashed" dialog appears. Seems Apple are a long way off perfecting Safari on Vista.
-- Mark
AMD X86 based system Windows Vista (yuck!)

Windows 8.1 Install Fails, 8 Installs fine. (Not the usual CMPXCHG16b, PrefetchW, and LAHF/SAHF problem)

Hi All,
I have 2 machines with this problem now, both 64 bit (one a Pentium D, and one a Core 2 Duo), they both used to run Windows 7 x64, and both now have clean installed Windows 8 x86 on them (because I didnt install x64 as this a) didnt boot the installers)
and b) wouldnt run as these both seem to not have one of the CMPXCHG16b, PrefetchW, and LAHF/SAHF instructions.
I'm happy with them running x86 but would like them to be running windows 8.1..
Now I'm an MSDN subscriber, so I have downloaded and tried to boot the x86 versions of 8.1 (all editions), and all of them abort during boot at the blue flag with a "sorry your pc has had a problem and needed to restart"
I then thought I could install 8 and upgrade it in place using the store, so I installed 8 pro, and downloaded the update, which reboots the PC (happens same on both), and then crashes during boot at the same point.
I understand that the x86 version doesnt need the extra CPU instructions.. so why doesnt it work?
Any ideas?
Thanks, Sam

Hi
Auggy,
Thanks for your reply.
There are no memory dumps in that location.. (there are no .dmp files anywhere under the $Windows.~BT folder)
There are some other files which look like other logs though so I will have a look in
those see if anything jumps out at me as a problem.
Is there any way I can collapse the code block above? Its a bit huge and Id like
to collapse it to make this more readable (id also post the other logs if so so
that I dont clutter the thread too much with logs.. )
Thanks

How to install clusterware on windows 2008 R2 64bit

Hello all,
As you know at otn there is only 10.2.0.4 clusterware setup for windows2008.
I want to install oracle clusterware on 2008R2. I know that there is a patchset 10.2.0.5 for windows 2008R2.
But before using it I must have alredy binary setup for oracle. (I assume)
So when I trying to setup clusterware on 2008R2 I got error
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
So I want to know , Is there any way to apply patch to setup files ? So I can install clusterware.
Or how can I install clusterware on 2008R2

Hi,
Do not install Oracle Database/Clusterware 10g Release 2 on Windows Server 2008, Server 2008 R2, 7 or Vista using the 10.2.0.1 version. You must use the 10.2.0.4 (64-bit) x64 version specifically created for these operating systems. After installation, for Windows 7 and Windows Server 2008 R2, patchset 10.2.0.5 or higher must be applied.
Regards,
Levi Pereira

How to restore from back up when some files are corrupt and crash the restore?

iphone 4 16gb
IOS 5.0.1
iTunes 10.5.3
History:
installed iOS5 back on release date. install was interrupted, likely due to high volumes. Completed install. Initial problem noted: unable to add events to calendar. Then problem progressed to "Voice Memo" app crashing. I installed "Quick Voice" app as an alternative. Problem progressed further to an unexplained increase in "other" content on iphone. Last week I tried syncing my phone and received error message that I didn't have enough space to complete sync. Noted then that "other" content was around 5.4gb! Removed "voice memos" playlist from selected playlists to sync under music tab and noted that other content dropped to 4.5gb
Synced the phone and noticed that it appeared to move through the sync process faster than usual. Sync showed "audio" content and "other" content to be the same size at about 4.5gbs.
After sync was completed I disconnected the phone and looked at the content of my phone. No apps, No music, No photo albums! SMS texts, Notes and Contacts still all intact on phone.
Tried multiple solutions including restore to fix the problem. Each time, when the phone is plugged in and mounted in iTunes, it shows audio content at 4.5gb and other content at 4.5gbs yet the phone itself has no music, no apps and no photo albums. It does still have pictures in "camera roll", though.
After trying many suggested solutions, I gave up and went to Apple store to see the Geniuses (Genii ) They did a firmware update and reset my phone. I was advised to restore from back up. However, when I tried to restore from my back up, it would fail to complete. Unable to restore from back up and sync attempts fail.
The only data I really don't want to lose is my text message history, my notes and my voice files from "Quick Voice" app.
Restoring from back up is not an option since I believe there are corrupt files in the back up. So what I want to know is can I restore my phone as a new phone, and then re-install my text message history, notes and the sound files from the "Quick Voice" app? Perhaps using a 3rd party app to retrieve those particular files from my back up and copy them to the phone directly? Or can I create a new back up file and copy those files to the new back up file. Hopefully I would then be able to restore from the newly created back up successfully since the likely corrupt files will be in the old back up file?
All other information; apps, photos, music and contacts can be re-installed from iTunes.

Sigh....
And it just keeps getting stranger! I just disconnected the internet and opened iTunes on my Mac. It opens just fine when disconnected from the internet. iTunes crash seems to be caused when it's trying to connect to iTunes store????
Really need help!
1) Why is iTunes crashing when connected to internet?
2) If I am unable to restore from my back up due to corrupted files within the back up, how can I preserve my text messages, notes and "Quick Voice" app files?

Installing Clusterware 10.2.0.1 crashed the VM Host

Similar Messages

Maybe you are looking for