Installing Clusterware/ASM Grid 11.2.0.1, errored out when running root.sh

Working through the installation of Clusterware/ASM Grid using 11.2.0.1.
After running the first root.sh script, no problems. On the second one, getting this error:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/grid/1120/grid/crs/install/roothas.pl line 413.
Any ideas of how to get this running?

Hi guys,
I'm having this problem on the second node and in the /var/log files I'm getting these errors.
Can any one help?
Regards,
Ahmed
May 26 16:05:37 node su(pam_unix)[7567]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.
May 26 16:05:37 node su(pam_unix)[7571]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.
May 26 16:05:37 node su(pam_unix)[7570]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.
May 26 16:05:37 node su(pam_unix)[7583]: session closed for user oracle
May 26 16:05:37 node logger: Failure in CSS initialization opening OCR.

Similar Messages

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

When installing a NI 5112, I get an error message when running the test panel.

I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
Thanks,
Thomas

Hello Thomas,
The error code you are getting is related to the board not recording enough samples in the given time interval. May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
LeeM
AE,
National Instruments
Message Edited by LeeM on 10-31-2006 10:47 AM

After Installing Adobe Muse CC Trial, I Get an Error: 5 when attempting to launch. How do i fix this?

Hi,
I've just downloaded the trial version of Adobe Muse CC to my desktop. I'm using Windows 7. When trying to launch the app, I get asked to uninstall and reinstall Adobe Muse which i have done but still receive an Error:5.
How can i fix this?

Moving this discussion to the Help with using Adobe Muse CC forum.
Bacusn I would recommend reviewing the installation log files for any specific error messages during the installation. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Error message when running HD-DVD player after clean win 7 install on P205-S6347

On a P205-S6347, did clean win 7 ultimate install with toshiba instructions and loadup software downloaded from toshiba support. On first dvd player install of latesed full player, got a video eror. Installed latets patch, now I get "An error has occured in the audio output settings. Please check thet the sound driver is set up properly" The sound playes fine for all other programs/utilities. Note, I am running USB powered Logitec external speakers. I have tried to follow all the recomendations of others with this problem, yet nothng works, unless I'm not using the right software, yet I only use whats on the site for the model and OS. The reason that I want to use this OEM player is that I havent found a comparable player that does just that, playes DVD's like a home unit, complete with menu access as a physical player would and that the moving cursers only seem to work with the Toshiba player, whereas others like VLC and Kantaris will only show one moving curser on a menue and I have to guess where the next one is to slick it to start, and Real Player isnt any better either. Other problems I've had with other players are that the graphics seem a bit hazy sometimes, I never have that problem with the Toshiba player. Also, others have way to many bells and whistles, I only want a player that works doing that specific job. I wish Toshiba would package a universal player that could be installed with all that it needs to run itself. Any Ideas folks?

Try to use the command ipconfig /renew in the cms (command dos box)
Also try this:
Control Panel > Administration Tools > Computer Management > Services & Applications > Services.
Scroll down this list to find 'WLAN Auto Config'
Double click on 'WLAN Auto Config' On the general tab, select from the start up type drop down menu, select 'Automatic'. Under Service Status click on 'Start'. Then 'Apply' these settings and exit from all open control panel windows.
Otherwise uninstall the Realtek driver in the device manager.
Then reboot the notebook.
Download the Realtek WLan driver again and install it.

Tryed to install the latesest version of itunes and got error 126 when trying to start itunes

After installing the latest version of Itunes, which it said it installed successfully,I got the following message when trying to start up Itunes,
Error 7 Windows error 126 The program can't start because MSVCR80.dll is missing from your computer.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT3910 Hey, the applications install DVD came with my macbook showed an error message when I install it. What should I do?

Hi all, I am trying to reinstall Mac OS system on my macbook today, everything was fine, but somehow the applications install DVD showed an error message and it asked to contact the manufacturer. What shall I do? Thank you very much!

I cleaned again, but it refused to work...
Thanks for the suggestion, I will call them. Hope I will have a better luck here!

Installed JDK but still error message when running java class

Hello
Can you please help me somebody?
I installed everything how it was in the book.
So I created my first script.
I ran "javac HelloUser.java" which created the class.
And then when I want to run the "java HelloUser " I always get this message:
exeption in thread "main" java.lang.NoClassDefFoundError: HelloUser
I just dont understand it. I changed the paths in the system settings as well.
Thank you
Thomas Popovits

http://onesearch.sun.com/search/onesearch/index.jsp?qt=java.lang.NoClassDefFoundError&subCat=siteforumid%3Ajava54&site=dev&dftab=siteforumid%3Ajava54&chooseCat=javaall&col=developer-forums

Installed newest version of Itunes and get an error message when trying to launch

downloaded and installed newest version of itunes twice, when i go to launch it says the following error messge "the ordinal 2551 could not be located in the dynamic link library CoreMedia.dll"

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Setup is timing out when running install for M175 on Win XP Pro

This is a new problem that has come up since I changed my WEP code on my WiFi and am now trying to edit it for my printer to continue operating wirelessly. theis setup has been working for almost three years.
I've tried running setup (4.0.2.6223) with USB or Wireless configuration and in every case it times out (Fatal Error: An install operation took too long to...). I've reviewed the HP blogs and tried many of the solutions with no luck. I am logged in as administrator and have changed spooling to manual in services. I have tried to turn off all services and hide the MS stuff in msconfig but I get an access error. I also believe that Universal Printing services is on but don't know where to disable it.
I have done tech for the last 25 years and have had literally hundreds of HP products. This proble has brought me to my knees.
I hope you can help
Thanks
Ron Joyal

Thanks for letting me know that information RonJoyal. Sorry to hear that you are still unable to install the software, you are also having the same issue with a second computer.
I believe with the USB install the Universal driver is the default driver being installed which is causing this issue.
Please follow the steps provided below:
Remove the drivers first from the Print Server Properties. How to Locate Print Server Properties for Windows 7. On the Driver tab, highlight and remove the printer. Remove the Laserjet and any Universal drivers.
Run the uninstall again to remove all the files that previously installed.
Run the install again. After connecting the USB, immediately follow this document please, to update the driver. The driver is probably defaulting to the Universal driver which is causing the software to time out. Then the install should continue through. A Fatal Error Displays During Software Installation.
Are you doing this installation remotely?
If you are still running into issues, then connect the Ethernet cable from the printer to the router, temporarily.
Run the install to see if the drivers will fully install by this connection.
Follow these steps to configure the wireless now.
Wait about a minute, print the configuration page to see if you get a IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. Select the networking tab, wireless on the left hand side. Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Wait for few minutes and you should get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. Just to make sure it is still on the network.
Then flip the port with the new IP address.
Go to start, devices and printers, right click the printer and left click printer properties, select the ports tab.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Test the printer.
Let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Does installing windows through Bootcamp effect the speed of the laptop when running OSX

My friend and I are having an argument about wether installing windows 7 on your macbook pro through Bootcamp (early 2011) will slow down your laptop even when it is just running OS X (I think it wont)

The Windows partition use NTFS (http://en.wikipedia.org/wiki/NTFS). NTSC is a television standard used in North America (http://en.wikipedia.org/wiki/NTSC).
Mac OS X does not use FAT, but HFS+:
http://en.wikipedia.org/wiki/HFS_Plus

Grid Installer Wizard step 9 of 10 - execute script root.sh problem

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6)
and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
The Virtual Disk for each VM is 20 GB whose raw device is /dev/sda (partition /dev/sda1 is the same size).
In order to install Grid Infrastructure, I add 5 Hard Disks into the first VM rac1 and 10GB for each Hard Disk.
Then create 5 ASM disks respectively as a Disk Group. Let me describe them as follows:
OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
Corresponding raw devices: /dev/sdb (sdc sdd sde sdf)
Corresponding partition: /dev/sdb1 (sdc1 sdd1 sde1 sdf1)
Corresponding ASM disk: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
When I run Grid installer step 5 of 8, I select all of 5 ASMDISK as ASM disk group in the Wizard.
The clusterware files are supposed to be stored in the ASM disk group.
The 2 VMs rac1 and rac2 should use the same ASM disk group.
By here, I don't do anything regarding ASM disk group in the second VM rac2.
When run the Grid Installer step 9 of 10, execute script root.sh in the 2 VMs rac1 and rac2. The script root.sh runs in the first VM rac1 successfully. But when the script root.sh runs in the second VM rac2, the error message comes up as following:
ORA-15018: disk group cannot be created.
ORA-15031: disk specification 'ORCL:ASMDISK5' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK4' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK3' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK2' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK1' matches no disks.
Configuration of ASM failed.
Did not successfully configure and start ASM.
Initial cluster configuration failed.
From the above error message, it seems that we need to connect the second VM rac2 with the ASM disk group created in rac1 so that 2 VMs use the same set of the ASM disks.
But I don't see anything about doing ASM disk group in the second VM rac2 in the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html.
My question is:
Do any folk understand how to solve ASM disks issue in the second VM rac2 when run the script root.sh in rac2 on step 9 of 10 in Installer Wizard ?
Thanks.

Hi,
One of mandatory requirement for RAC is shared storage. Check if you have shared storage across all nodes.
Run oracleasm listdisk on node2 to see if it can see the same disks on node 1. Otherwise you didn't follow that tutorial correctly
Cheers

Install 10gr2 ASM on single node, need clusterware installe first?

Install 10gr2 ASM on single node, Do I need install clusterware first?
When I install clusterware on single node, it shows " the specified nodes are not clusterable"
Thanks.

ASM and clusterware are two separate things. Clusterware is required only if you are setting up a RAC environment, is this your case? If you are just planning to use ASM then proceed with the RDBMS (database disk) install and use the DBCA to perform ASM configuration. It is assumed you have the raw devices ready to setup the ASM instance. Once the ASM instance is ready you can create the database to use the ASM disks.
~ Madrid
http://hrivera99.blogspot.com/

Please verify my RAC install with ASM procedure with a question.

Good morning.
My installation procedure on RAC with ASM (ASM will be on separate home from DB):
1. Install clusterware 10.2.0.1
2. Apply database patchset 6810189 upgrade clusterware to 10.2.0.4
3. Apply CRS patch bundle #4 8436582 to clusterware
4. Install oracle DB home 10.2.0.1
5. Apply database patchset 6810189 upgrade to 10.2.0.4
6. Apply DB PSU (patch# 8576156) 10.2.0.4.1 (includes CPUJUL2009) to the oracle home
(steps 7-9 are similar as step 4-5, except for ASM home. Or should I install ASM home before installing DB home? )
7. Install oracle DB home 10.2.0.1 for ASM and configure ASM
8. Apply database patchset 6810189 upgrade to 10.2.0.4 for ASM
9. Apply DB PSU (patch# 8576156) 10.2.0.4.1 (includes CPUJUL2009) to the oracle home for ASM
10. Run DBCA to create database.
Can I apply DB PSU (patch# 8576156) 10.2.0.4.1 (INCLUDES CPUJUL2009) to DB while the clusterware is 10.2.0.4, as I know DB version should not be higher than clusterware version? Or can I upgrade clusterware to 10.2.0.4.1?
Thanks for advice,

Hi,
Applying PSU (10.2.0.4.1) does not mean that you are moving to higher version of Oracle. Oracle releases will be like 10.2.0.4 , 10.2.0.5 like that.
10.2.0.4.1 is the PSU version for Jul 2009 PSU.
10.2.0.4.2 is the PSU version for Oct 2009 PST.
Like CPUs PSUs are also quarterly. It is not necessary oracle should release the PSU/CPU for every oracle home/CRS home every quarter.
For now, the PSU (Patch no: 8576156) is only applicable as shown below.
PSU 10.2.0.4.1 includes the following previously released bundle patches:
- Generic Recommended Bundle #4 (Patch 8362683)
- RAC Recommended Bundle #3 (Patch 8344348)
- Data Guard Broker Recommended Bundle #1 (Patch 7936793)
- Data Guard Physical/Recovery Recommended Bundle #1 (Patch 7936993)
- Data Guard Logical Recommended Bundle #1 (Patch 7937113)
Refer to the installation types of this patch (download README of this patch bundle).
Table 1 Installation Types and Security Content
Server homes - PSU 10.2.0.4.1
Client-Only Installations - None
Instant Client Installations - None
(The Instant Client installation is not the same as the client-only Installation.
For additional information about Instant Client installations, see Oracle Database Concepts.)
ASM (Automatic Storage - PSU 10.2.0.4.1
Management) homes
CRS (Cluster Ready Services) - None
homes
So, there is no PSU patch for this quarter for CRS Home. You may check the previous CPU/PSUs to make your home secured/updated with all patches.
Regards,
Vasu
Edited by: vasu77 on Sep 22, 2009 3:01 PM

A non-RAC question for the experts: Clusterware + ASM

Hi
We have a 2-nodes cluster in production.
It's an active/passive cluster with a cold failover using SUN Cluster.
There is only one Oracle 10G single-instance database (DB1), running on node #1, that use ASM to access the SAN (it's raw devices).
We want to add a third nodes to move to a 3-nodes cluster, that would have 2 separates single instance Oracle 10g database
node #1: DB1 with ASM (the existing database, existing raw devices)
node #2: cluster passive node
node #3: DB2 with ASM (new additional database, new raw devices)
All nodes are connected to the same SAN.
We' want to use Clusterware instead of SUN Cluster.
The single-instance databases, the listeners and the ASM instances would be protected by Clusterware using "application VIP" (not oracle-vip).
It's not RAC ! but in the future both database might become RAC (but that's not the need today)...
My concern is about ASM !
Do I have to install an ASM instance on each node (just like in RAC) ?
Or may I just configure clusterware to ensure there is only ASM instance running on a node ?
Is it possible to have the ASM instance of node #1 and the ASM intance of node#2 that access the same SAN & raw devices ?
In the case DB1 & DB2 fail over to node#2, the unique ASM instance must see the raw devices of both databases, is this possible ?
Do I have to destroy the curent ASM configuration of DB1 to build the new one, or can I just add new raw devices and share tem across all nodes ?
Thanks for your answers.

Hi,
Thanks for the answer
I found this very interesting doucument but it does not go into enough details about ASM, which is my concern.
I found in the Oracle 11g documentation a statement which say that clustered ASM instances for single instance database do not need to talk each other as long as they do not handle the same diskgroup (Figure 1.3 ; http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asmcon.htm#i1021337) . Otherwise, it must be clustered. It would also be a problem for me when DB1 and DB2 are on the same node. I would need two different ASM instance, on the same node, which is not a good situation.
What happen when I start an ASM instance on node #3 to access raw devices already in use by node # 2.
I think I need to start from node #1 and change some ASM configuratoion to make it cluster-aware.
Next, I would add a second clustered ASM instance on node #2, and so on, to make sure that all ASM instances of all nodes can access the same diskgroup, and thefore being able to re-use the existing database on node #1 as well as creating a new one one node #2 (all on the same SAN)

Installing Clusterware/ASM Grid 11.2.0.1, errored out when running root.sh

Similar Messages

Maybe you are looking for