Installing ColdFusion 11 in Windows 8.1

I can't no longer download the 30 days trial for CF 10, all I can see is CF 11 when I go to http://www.adobe.com/go/trycoldfusion/ It is OK for me to try CF 11, it is not a problem because I have not submitted a purchase request to my department. I have no difficulties installing CF 11 on my Windows 8, the problem is on how to configure CF to work with IIS or vice versa. I found some suggestion to modify IIS8 into IIS7, I did it but I still can't get it to work with CF11. Now I already have IIS 7 instead of 8 and I still can't open my website nor CF administrator. I got internal server error message 500. Is this because I have to install some CF hot fixes or something else? there are not too many tutorials out there with CF 10 or 111 and Windows 8 IIS. Is there any easy step by step instruction either from Adobe or someone who has successfully install CF10 or 11 and don't mind sharing it with me?

You need to launch the Web Server Configuration Tool (C:\ColdFusion11\cfusion\runtime\bin) aka wsconfig.exe and then add the specific website/All websites (by choosing All)
NOTE : Before running the wsconfif.exe make sure that IIS websites are not configured with previous version of ColdFusion. If they are and you do not want them to run with CF 10 then you can configure them with CF 11 as mentioned above.
I will not at all advise you to do the same if you are on a production server. If it is a production server then perform the above during the maintenance window.
HTH
Thanks
VJ

Similar Messages

  • How to install coldfusion 8 on windows xp pro sp3

    hi
    I  installed coldfusion 8 (standart or multiserver) with any error but browse coldfusion admin panel I getting some error like  The Macromedia application server(s) are unreachable.
    how to solve this problem
    firewall turn off
    antivirus software not install
    .net 2.0 installed
    xp pro sp3 tr
    thanks

    This forum is for feedback about the OTN site. The best place to get an answer to your question is the database installation forum. the URL is:
    Database Installation

  • I get Malware alert when installing ColdFusion 10 for Windows 8

    Whenever I start to install the ColdFusion 10 installer platform for Windows 8, Malwarebytes quarantines a file it labels as having the Trojan.pophot virus. The suspect file is NTAdminRights..., where "..." is a random number ending with .exe.
    Does anyone know if this is a false positive detection?
    Thanks

    You need to launch the Web Server Configuration Tool (C:\ColdFusion11\cfusion\runtime\bin) aka wsconfig.exe and then add the specific website/All websites (by choosing All)
    NOTE : Before running the wsconfif.exe make sure that IIS websites are not configured with previous version of ColdFusion. If they are and you do not want them to run with CF 10 then you can configure them with CF 11 as mentioned above.
    I will not at all advise you to do the same if you are on a production server. If it is a production server then perform the above during the maintenance window.
    HTH
    Thanks
    VJ

  • Problems Installing ColdFusion 9 (64 bit) on Windows 7 and IIS 7.5

    Problem:  Empty response for static Files including images, CSS and js files. The response code is 200 OK, but there is no actual response (it's empty).
    The ColdFusion Administration web site works correctly except it's not displaying any images, css and js. Why it is serving up dynamic content and not static is a mystery.
    Installed ColdFusion 9 (64 bit) Multiserver Option on Windows 7 running IIS 7.5.
    I have verified that IIS 7.5 is correctly configured for Static Content for both the handler mappings and the modules.
    The Configuration for IIS 7.5 install looks like this:
    The ColdFusion web configuration tools shows that it is connected to all instances of IIS.
    I have uninstalled ColdFusion9 and IIS 7.5, and reinstalled many times but get the same problem: Empty responses for Static Files.
    Help is appreciated.

    To Clarify the blurry picture, this is what the IIS 7.5 install options look like:
    Web Mgmt Tools > II6 Mgmt Compatility > IIS Metabase  & II6 Compatability
    WWW Services > Application Dev Features > .Net Extensibility and ASP.Net and CGI and ISAPI Extensions & ISAPI Filters
    Common HTTP Features > Default Document and Directory Browsing and HTTP Errors and Static Content
    Security > Request Filtering

  • Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

    I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
    The server is brand new and it's a fresh install of Apache and ColdFusion 9.
    Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
    On closer examination of the Windows error log, I saw the following error:
    The Apache service named  reported the following error: >>>
    httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
    I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
    After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
    I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
    I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
    The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
    Any help would be much appreciated. I have spent hours trawling the Web for solutions.

    I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
    OK. Simple solution to this. I'll put it here for other peoples' reference.
    To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
    Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
    Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
    The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
    Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
    IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
    Hope this helps someone else out.

  • Windows 193 error when installing coldfusion 8,9

    Hi,
    I am installing coldfusion 9 or 8 in mysystem and repeatedly getting the windows 193 error during installation. I have already installed java too and this problem is still present.
    kindly suggest me a solution for this problem.
    regards,
    shafi

    "Windows 193 error" as in the error described on this page - http://msdn.microsoft.com/en-us/library/ms681382%28VS.85%29.aspx - ie: "%1 is not a valid Win32 application."?
    Are you trying to install the 64-bit version of CF on a 32-bit system, by any chance?
    Adam

  • How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

    How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
    I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems.  When we finally decided to cut over to SBS 2008, that’s when everything went to hell.  I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box.  During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations.  There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb.  After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
    I have attempted in this white paper to detail the steps to assist others who may be in a similar situation.  I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine.  BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true.  Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box.  After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging.  Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
    From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer.  The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe!  By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost.  Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded.  At any rate, take your time and follow the steps to achieve a successful installation. 
    PRE-INSTALLATION TASKS
    Back Up SBS
    It’s always a good practice to backup your server before deploying any kind of major system changes.  Although this step is optional, I recommend it in case you need to restore your server for any reason.  Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone.  You will need a full backup with system recovery information to restore.  Here are the basic steps:
    Click: Start > Programs > Administrative Tools.  Right-click “Windows Server Backup” and choose “Run as administrator”.
    Click “Backup Once” under Actions in the right-hand pane.
    Choose the “Different Options” radio button under Backup Options.
    Choose the “Custom” radio button.  What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
    Select the “SYSTEM (C)” checkbox, uncheck any others.  Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
    Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups.  You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images.  Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency.  Also, make sure the “Verify after writing (recommended)” checkbox is selected.
    Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product.  If like me you rely solely on SBS for your backups, choose the full backup option.
    Confirm everything and click “Backup”.  This process may take several hours depending on the size of your system.
    Verify ISAPI Filters:
    In IIS Manager, double-click the server instance in the left-hand pane.
    In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS.  If it’s set up correctly you should see two entries:
    IsapiFilterModule              %windir%\System32\inetsrv\filter.dll
    IsapiModule                        %windir%\System32\inetsrv\isapi.dll
    If either of these modules are missing, you will need to re-install these (google for a solution).
    Set Up Development Environment
    Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\).  For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
    Copy and paste your CFML files and directories into the new DEV root Web directory.  This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders. 
    Open IIS Manager and double-click the server instance in the left hand pane.  Expand the “Sites” folder.  Right-click the Sites folder and select “Add Web Site”.
    Enter a name in the “Site Name” box (e.g., “test-site”).  You will notice that the system will automatically create a corresponding Application Pool with the same name.  NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
    Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
    Don’t worry about testing the connection.  If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV).  Don’t worry about this for the time being.
    Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”).  Click “OK”.
    Configure Application Pools for Installation
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”.  NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
    Modify the application.host.config File for 64-Bitness
    Click: Start > Programs > Accessories.  Right-click “Notepad” and choose “Run as administrator”.
    Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
    Do a search and change this one line from:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
    To this:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
    Restart the IIS Admin service.
    Set HTTP Compression
    According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
    Click: Start > Programs > Accessories.  Right-click “Command Prompt” and choose “Run as administrator”.
    At the command prompt, change directory to intetsrv by typing: cd inetsrv
    Run the following command:
    C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
    This will turn off HTTP compression for all sites in IIS.
    In IIS Manager, double-click the server instance in the left-hand pane.  Double-click the “Compression” icon in the IIS section of the center pane.
    Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Restart the IIS Admin service.  This should enable compression and coldfusion to work at the same time.
    NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
    C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
    INSTALLATION TASKS
    Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
    Right-click the file and select “Run as administrator”.
    Accept the terms of the License Agreement.
    If you have an Enterprise license, enter it.  For our purposes, just click the “Developer Edition” checkbox.
    Select “Server configuration” – the default radio button.
    I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”.  It should be fine, particularly if you install documentation.  My preference was to keep the install as plain vanilla as possible.
    Select the directory path for Coldfusion to install into – default is :C\Coldfusion
    THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS.  Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button.  Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”.  Hit “OK”.
    Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”).  Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”).  The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
    Enter an Administrator password.
    Choose to Enable RDS, or not.  I enable this by preference but it is not required.  This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely.  Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
    Confirm everything to kick off the install.
    If all goes well you should see a message at the end stating that the install was successful.  I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install.  NOTE: we will open it a different way during the post-installation tasks.  The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
    POST-INSTALLATION TASKS
    Verify CF Installation:
    The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8.  The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory.  Our CFIDE files, however, are located within: D:\DEV.
    To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
    This should bring up the Coldfusion Administrator Login screen.  Enter in the Administrator password you created during the install to log in and configure your application server.
    Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
    Fix Application Pool Defaults to Re-enable SBS Web Applications:
    At this point, Coldfusion Administrator and your test CMFL Web site should be working properly.  The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start.  Fortunately, this is easily remedied by performing the following steps:
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time.  This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.).  There is no need to restart IIS.
    Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
    In IIS click to highlight the application pool for your new site (e.g., “test-site”).  In the right-hand pane, click “Advanced Settings”.  Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
    Lastly, jump up and down for joy!  Hopefully now, everything is working.  Best of luck!! ..Paul D (MCP).

    First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
    Second, this is probably your problem right here:
    http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
    In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
    As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
    Dave Watts, CTO, Fig Leaf Software

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • Install coldfusion MX 6.1

    Hello
    Can anyone please sort my problem:
    I want to install coldfusion 6.1 MX version , I have the
    licence for but when I click the OK at the beginning of the install
    nothing happens.
    Something seems to stop the install procedure .
    If anyone can give me a hint I would very much appreciate.
    Thanks again.

    Thanks ksmith for your reply
    Let me give you more information.
    I am using windows xp pro with IIS turned off but running
    with Apache.
    I have a CD of the french version which works fine but I have
    uninstalled it
    I want as I did with my notebook to install the english
    version of coldfusion mx 6.1 . In my studio mx 2004 there is a
    developper edition of coldfusion mx 6.1.
    I cannot perform the install.
    I tried to follow the link you sent me but there is no folder
    with coldfusion in it as I have uninstalled every think concerning
    the soft.
    I made a try with the developper edition of coldfusion MX 7
    and the install seems to work.
    My english is not so fluent ,my apologies.
    Many thanks again for your concern.

  • Installing coldfusion 9 kills WSUS; ODBC connectors on CF9 64bit

    Two questions.
    I have a server set up at home. I have 8 PCs conencted to it. It is used to run file services, WSUS to keep PCs up to date, and a home web server with some CF apps I've written over the years. This is a home environment, not a corporate environment so SQL / Exchange etc are out of the question.
    The server used to run XP x86 with CF7. Everything just worked. All of the time.
    But I wanted to make use of more memory, which means x64. I also updated the hardware and expanded my storage to 13TB. So I installed Windows 2008 R2 x64.
    Got everything working perfectly, without Coldfusion. As soon as I installed Coldfusion my woes started. It installed properly first shot, which is a rare occurence if what I read here and around the net are any indication (I count my blessings that it worked first shot).
    I installed CF 9.0.1 x64. WSUS ceased to function. All clients started getting download errors 0x80244018 etc. From googling the problem it seems that the problem was the handlers that CF9 added (But I could be wrong about that). WSUS runs on the same IIS7.5 server as my home website, but on port 8530.
    And of course, there appear to be no 64 bit ODBC drivers. I just use MS Access and excel for all my needs. I have about half a dozen apps I have written, most of which I have become dependent on for many reasons. I have no need, desire, or justification to invest in expensive technologies. Upgrading my CF7 to CF9 is going to cost an arm and a leg.
    So, rather than learning a new language like PHP..
    Q1: How do I install CF9 without breaking WSUS?
    Q2: How do I continue to use MS Access to access my mdb files when I have x64 O/S, X64 CF9?

    Surely someone has Coldfusion running on Windows 2008 R2 with WSUS?
    On the same box?  I doubt it would be that common.  I don't think it would be very common to be running WSUS from an application server box.  Obviously I can see why you're doing it, and it's a reasonable use case, but I don't imagine it's that common.
    Now... I am a CF developer, not a CFAdministrator, and haven't been a system's dude for about ten years now, so my knowledge on administering Windows and CF and all that sort of thing is very rusty, but the troubleshooting techniques should be similar.
    You mention WSUS talks to IIS on port 8350 (when it's working).  Have you checked what's listening on port 8350 once CF is installed?  I'm unaware of CF listening to any port in the 8xxx range other than the one you tell it to for the inbuilt webserver (which will be installed and listening even if you configured your CF install to use IIS).  However it usually listens on 8500.
    I'd also do a search through the CF / JRun dir for references to 8350.
    Secondly... I believe (but this is said with only about 50% confidence) one can export an IIS config to a text file these days?  Export the config before and after CF interferes with things, and do a diff.  What's different?
    That said, I presume they're both not working from the same website, so I think it's probably more likely to be at a network level than at application level.
    And when you have CF installed, the CF side of things runs fine (other than lack of ODBC drivers)?  Either way, scour the logs for both systems at start-up, to see if there's anything interesting.  You don't mention having looked at log files.
    As for ODBC drivers... forget it.  Port your data to a Derby DB (it should be able to do anything Access can do, I should think?), or MySQL or something and be done with it.
    Adam

  • Having trouble installing Coldfusion Builder?

    I am running Windows 7 and have already installed Coldfusion 9.  When I go to install Coldfusion Builder I get an error even before the installer loads up.  The error I am getting is as follow:
    C:\Users\Owener\Downloads\Coldfusion..exe
    The NTVDM CPU has encountered an illegal instruction.
    CS:0e1d IP:o1f3 OP:63 65 42 65 67
    Choose 'Close' to terminate the application.
    Does anyone have any idea how to solve this problem?

    There shouldn't be a problem running on Windows 7: it installed OK on my Win7 machine.
    I just noticed this thread is in the CF forums, not the CFB forum. They are two separate and only notionally related products.  I recommend re-posting your question here: http://forums.adobe.com/community/labs/coldfusionbuilder.  One benefit is that that forums is monitored by Adobe people, whereas the CF forums are not.
    Adam

  • Trouble installing Coldfusion 9 Builder

    I already installed Coldfusion 9 and was attempting to install Coldfusion9 Builder when I encountered this error message: 'NTVDM CPU has encountered an illegal instruction.'  Does anyone have any ideas how to solve this problem?

    There shouldn't be a problem running on Windows 7: it installed OK on my Win7 machine.
    I just noticed this thread is in the CF forums, not the CFB forum. They are two separate and only notionally related products.  I recommend re-posting your question here: http://forums.adobe.com/community/labs/coldfusionbuilder.  One benefit is that that forums is monitored by Adobe people, whereas the CF forums are not.
    Adam

  • How to install ColdFusion 801 lin.bin

    I don't know what is going on, but I believe Adobe is going
    back in time.
    I have some experience with Linux and a lot of experience
    with ColdFusion, but trying to install ColdFusion on my linux
    mashine is like going back to dos. What is going on?
    Why do I have to change permissions using chmod?
    I thought we are over this by now and Linux has learned
    something from Windows and Apple in terms of usability.
    Not everybody wants to be a nerd and delph into the deep end
    of linux file handling just to install a program.
    Why is it not available as an rpm?
    The documentation on the abobe site is a joke and very hard
    to find.
    I understand security, but surely a simple but effective
    admin password will do without having to change permissions. I can
    do everything else with my admin password.
    As I am not interested to become a linux specialist, but to
    get on with my job, abobe and linux have failed me.
    Maybe I should give Windows and asp or .net another go.
    Trying to install ColdFusion on Linux is like buying a car
    without doors or keys. What is the point?

    This should help:
    http://www.communitymx.com/content/article.cfm?page=1&cid=224AA
    Ken Ford
    Adobe Community Expert - Dreamweaver/ColdFusion
    Adobe Certified Expert - Dreamweaver CS4
    Adobe Certified Expert - ColdFusion 8
    Fordwebs, LLC
    http://www.fordwebs.com
    http://www.cfnoob.com

  • Failure while attempting to install coldfusion 11 on win 2012.

    On my windows server 2012, I have installed IIS (8.0), then; I attempted to install coldfusion 11. I am getting the following error:
    Cannot configure IIS Connector. Enable the required options ASP.NET, CGI, ISAPI Extensions and ISAPI Filters in IIS under Windows Features and try again.
    Has anyone gotten through this yet and can step me through.
    I have been through server manager IIS and added ASP.NET 4.5 but I cannot find where to make the CGI, ISAPID changes at.
    Everything I google is finding win 2008 and coldfusion 10, I attempt to follow those steps but they don't necessarily match 2012.
    Any help would be appreciated as I am new to installing this software.

    Hi,
    Open Server Manager>Select Web Server>Application Development.Check the necessary component.
    Hope this helps.
    Thanks,
    Priyank

  • Error to install Xcelsius 2008 on Windows vista. Error 1935.

    I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
    Error 1935 Error al instalar el ensamblado.
    "Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

    From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

Maybe you are looking for