Installing Collaboration Suite on Remote Linux Server! Need Help! URGENT!

Hi everybody,
I am a beginner having few months of exp as Apps DBA. I was given a task of installing OCS on a remote linux server. How to install from my local windows desktop. Wht r the steps to be followed? I need help Immediately! Is it possible through SSH ?
Thanks in advance,
Manoj.

You need to have:
- Ssh running on the remote server
- An ssh client on your local PC (e.g. PUTTY, it's a freeware), capable to tunnel and forward X traffic
- An X client running on your local PC
Then:
- On the server, configure X to accept connections from your PC:
export DISPLAY=your_ip_address:0
- Then, on the server, you have to enable your PC to use X but I can't remember the command.... will search for it and update the thread
- Configure and activate the local X client on your PC
- Configure PUTTY to forward X traffic. Connect via ssh logging in normally to the remote machine. Just leave the session open (maybe it's a good idea to remove any timeouts parameters). The SSH tunnel is now built, and the X traffic should be OK
- Test the connection: if you type "xclock" in the SSH window, a nice little analogic clock will appear on your PC desktop (if everything is OK).
- If the clock appears.... Well, go on with your remote installation! :-)
Bye,
Roberto

Similar Messages

  • Install JSC on a remote linux

    Hi.
    Did anybody install JSC on a remote linux exporting the X?
    I want to install it on our department server (my machine has not memory enough) but, although the X windows are correctly exported (xclock works fine) when i try to execute the installer i get:
    El instalador no se ha podido ejecutar en modo gr�fico. Intente ejecutar el instalador con el distintivo -console o -silent.
    Then i try with "-console" but i get:
    The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
    WARNING: could not delete temporary file /root/ismp001/4095551
    Thanks

    I've tried to install it on the server itself, starting the X on it. The errors are the same, so it is not an error about exporting the X...
    OK, the problem was solved with the instructions from
    http://blogs.sun.com/marcoscorner/entry/creator_2_0_ea_on

  • How to install developer Suite 10g on linux 9

    i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

    Hi,
    Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
    regards

  • I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help

    I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help.

    With an attitude like that, you got nicer replies than you should have.  I have my work email on my iPhone and my iPad, but there's no way on earth anyone here would have known what my companies server is other than my company system administrator.........

  • User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

    User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

    First, ask in the forum for the program you are using
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others

  • Need help urgently with OS X and Windows 7

    I need help urgently.
    I installed Windows 7 on my macbook pro with OS X Lion. After installing Windows7, I accidently converted the basic volumes to dynamic volumes and now i can't even boot to OS X.
    Please help me how to recover my OS X Lion. If I have to delete Windows and bootcamp partitions, it is OK.
    I just want to get back my OS X bootable.
    Thanks

    thihaoo wrote:
    Sorry
    I can't even see the OS X partition when I hold down the "Option" key.
    I could see OS X and Windows partitions if I hold down Option key before changing the partitions to Dynamic partitions from Basic in Windows 7.
    Now can't see OS X partiton and only see Winodws partition but when I tried to boot onto Windows7 , I got BSOD and macbook pro restart.
    Please help
    The usual reason for the OSX partition to be invisible under these circumstances is that it has been trashed by Windows.
    Do you have a backup?

  • BB Curve 8900 need help urgently!!!!!

    hey my blackberry 8900 rebooted but now it says "Reload Software:552" and no matter what buttons I press it just won't work, please tel me what to do I really need help urgently!!
    Solved!
    Go to Solution.

    Before you do anything else:  Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    Please let us know if that reboots the device properly or not.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I tried to buy the  WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.

    I tried to buy the  WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    To see which iOS version is installed, tap Settings > General > About

  • Username and password- Need help urgently!

    Hi
    1) First of all, i have received an email stating that my account under Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
    is being banned as there is multiple obsence post. I need to clarify that i have never used my account to post in BBM forum before. Even if i did, is when i need help urgently for my BBM application. Currently i am holding 4 bbms now. Have never came across this issue. Pls check and advise
    2) I urgently need to setup my email accounts. But this time round, when i logged in, they required for my email id and password. And yes my email id is Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use. all the while for the past 4 years. I am unable to log in. I tried all kinds of password but unable to log into my mobile settings
    Verfiy Blackberry ID
    This application requires u to verify ur blackberry id to continue.
    blackberry ID username:
    Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
    password:
    I went to the forget password option, unfortunately as i have never retrieved my password before, i am unable to remember the security question as i did not use it for the past 4 years.
    Pls advise.
    Urgent and thanks

    Hi,
    I have been trying this technique for the past 4 days. It doesnt work no matter how i change the password at the link that u gave me. Even though it's being reset accordingly, i am still unable to log in the password at my mobile. i am 100% sure that i have entered the correct password at my mobile. ( verify blackberry id) . I want to setup new email accounts under "setup" . Upon me clicking " email accounts", it prompt for the one key password. I have never faced this issue before. I am very very sure that my password is correct. Pls advise as i need to add email accounts. Other programs are working fine without any password required being prompt. ie. blackberry world
    This is very very urgent to be resolved. Pls help.

  • Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

    Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

    If you've had it for less than a year, then it's still under warranty.  Take it to an Apple store or an authorized service facility.  See http://support.apple.com/kb/HT1434

  • Need help urgent,my iphone is stuck at connect to itunes screen.when i restore with itunes it shows error -1. please help me

    need help urgent, my iphone is stuck at connect to itunes screen, when i restore it using itunes, it shows error -1...may someone help me plz....

    See:
    iOS: Unable to Update or Restore
    http://support.apple.com/kb/ht1808

  • Sound trouble need help urgent please

    Could somebody tell me how i can fix my problem.
    problem: when my curve 8520 is in silence profile en i start typing in a phnoe number i hear nothing,
    but when my phone is in normal profile i hear i beep with every number of the phone number i enter.
    so i want to know how i can stop my bb from making this noise

    My friend it is a fillable form, can i email you the pdf that iam trying to fill out? then would you be able to tell me how to do it please mate?
    I have attached the form, i need to fill in those boxes so that everything is accuratly height + spacing is correct, and to do it fast, thats all im after.
    Date: Sun, 27 Jun 2010 18:31:58 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need Help Urgent Please
    If is a fillable form, just tab to the next field. What we do not understand from you is IF it is a fillable form or not. If it is not, then the 3 options I gave can be used. Placing text is always a problem. You might find it useful to turn on the grid to help in placing your typewriter fields. However, if it is fillable you do not have to create any fields to type in, you just leave the tool as the hand tool and select the predefined fields with the cursor or the tab key and type accordingly. If the field is a checkbox, then you just use the space key to activate it.
    So, are we talking about a fillable form or something that has the appearance of a form, but not fields to fill in. This is what Bernd has been try to find out and you keep suggesting it is fillable as we read what you have said.
    >

  • I can't get Flashbuilder 4.6 to connect to remote Linux server on port 80

    I'm using Flashbuilder 4.6 on a Mac (Snow Leopard). I have a new CentOS 6.2 Linux server with Apache webserver 2.2.21 on it, then installed GlassFish 3.1.1 application server on it, then installed mod_jk to connect Apache and Glassfish. Everything is installed on the same server. I verified that I can deploy an example war file (web application) in Glassfish and access it fine using either,
        mydomain.com:8080/mywebapp  (uses port 8080, which is direct connection to GlassFish)
        mydomain.com/mywebapp   (uses port 80, which enters Apache and passes through mod_jk to get to Glassfish)
    This works well (no errors in any logs files).
    Then I download BlazeDS from Adobe website, create a hello world application with it and deploy it in GlassFish. I next try to setup a new Flex Project in Flashbuilder 4.5. Using the wizard, I come to the section (under Server location) where I need to input a Root Folder and Root URL. Everything works fine when using a Root URL of http://mydomain.com:8080/mywebapp, meaning, I can click on the Validate Configuration button and Flashbuilder connects to the server.
    But if I enter in the Root URL input field http://mydomain.com/mywebapp, then Flashbuilder cannot connect to the server. I need to eventually close port 8080, so I need this solution, which uses port 80, to work.
    I made sure that the httpd.conf file VirtualHost section does include a `JkMount /mywebapp worker1` statement, and I can even look at the mod_jk.log file and see that Apache correctly opens a socket for mod_jk to communicate via AJP between Apache and GlassFish (with no errors or warnings) when the address `mydomain.com/mywebapp` appears on port 80. The GlassFish server.log file also shows no problems.
    I'm stumped what to do next. Does anyone have experience connecting GlassFish, mod_jk, Apache, and Blazeds (or LCDS, should be similar)? If so, do you see any differences in my setup compared to yours? I'm only trying to use RemoteObject (not messaging, or streaming, etc.) with Java POJOs.

    Hi!
    Thanks for the reply. No, my ISP isn't providing me with three IP addresses, just one static address. And the VDSL modem...not a router, but beyond that, don't know much about it. Do have a switching hub, however, a gigabit thing that so far is working great.
    Managed, somehow, to get everything working, however. Really don't know what I did. But I can now take the MBP off the wire and connect to the other Macs without turning on Airpot on those machines. Next step now is to take the MBP to another location and try to establish a connection to the home network via Desktop Transporter or Vine. That's the Holy Grail that will allow me to sever the cords that keep me from straying too far from home during working hours. Love to sit at that coffee shop across the park and do my work from there!

  • CS2 PowerPC 10.5.8 re Install thwarted by Adobe d/c of activation server, need help!

    I had a computer issue, had to re-install my previously (2009) installed Creative Suite 2 Premium, w/ valid SN. Completely removed all previous Adobe product, checked and repaired permissions and dumped a bunch of suspect fonts. Rebooted and emptied the trash numerous times. Installed (not really) and got to on line or phone activation, only to find out activation server is kaput. I needed an Activation Code and would have been home free. Instead, i had to go D/L the same CS2 suite off Adobes site, w/ posted SN. I AGAIN removed all Adobe product from computer, only to have new error message come up with Cue being the only thing it will allow me to re-install. The PSD, ILL and InDesign buttons are greyed out and unavailable to install. It says I ALREADY HAVE THOSE ITEMS INSTALLED. I have checked, double checked and triple checked for any adobe traces of install, out of every folder in library, preferences, applications and anywhere else. Same message comes up. After spending a long time on Chat being shuffled between departments, i ultimately get sent here. They say they can't help me as CS2 is so old. PITA. All to re-install something i legally purchased and installed years ago! I'd upgrade if this was an Intel processor. But alas, this old PowerPC is at the end of it's road apparently. Any help to get me running again so i can get some work done? Any help is appreciated.
    Tim

    Went there did that. After D/L the above link(s), the installer somehow recognizes (falsely) that Photoshop, Illustrator and InDesign are installed, and their respective buttons are greyed out. Should i install individual components as opposed to the whole suite? I've checked and checked again for any remaining adobe product, there isn't any i can find. Another suggestion?
    Tim

  • Help, new to Linux and need help installing 8i

    I am new to Linux and some of this stuff..
    Yet,I have gotten the JDK116_v5 installed and working on my box.
    I have cut a cd for Oracle8i and need help..
    I have also recopiled my kernal as well...
    Does any one know where I can get help...
    null

    Al Pivonka (guest) wrote:
    : I am new to Linux and some of this stuff..
    : Yet,I have gotten the JDK116_v5 installed and working on
    : my box.
    : I have cut a cd for Oracle8i and need help..
    : I have also recopiled my kernal as well...
    : Does any one know where I can get help...
    Try http://www.akadia.com/html/dod-frame.html for Redhat.
    http://www.suse.de/~mha/oracle/ for SuSE
    Also peruse these
    http://www.akadia.com/html/dod-frame.html
    http://jordan.fortwayne.com/oracle/
    Colin.
    null

Maybe you are looking for