Installing Complete New Yorker DVDs on hard drive

Can anyone suggest a way to install the Complete New Yorker DVDs on my hard drive? Is there an application that will create a virtual DVD drive on which I can load the images? Thanks.
Mark

My reading of this section of Terms of Use is that it can't be done:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital
rights management software or hardware. This includes conversations about ‘ripping’ DVDs or
working around FairPlay software used on the iTunes Store.
Do not post defamatory material.
Any posts which would would be subject to locking and/or deletion, and/or dismissal from being allowed to post on the board. So do you really want anyone to take that risk for you?

Similar Messages

Installed a new seagate 160GB internal hard drive

I installed a new 160 GB internal hard drive. Reinstalled operating system, but the hard drive says it's only 31.37 GB. I've tried to erase the disk and restart from the installation DVD, etc. but it won't read it as 160 GB hard drive.
any suggestions?

Hi, jumpintoliquid -
Welcome to Apple's Discussions.
ATA hard drives use jumpers to set their address as Master or Slave.
Some drives also come with an additional jumper, which is used as a limiter to set an artifical size for the drive to approx 32GB. This is done because some (older, I think) PC CPUs could not address a volume larger than that.
The solution would be to remove that extra jumper (or reset it according to the jumper config label on the drive). This drawing from Seagate's site may also apply to your drive -
http://www.seagate.com/images/support/en/us/u5family1.gif
Edit - also, be sure the address jumpers are set to Master if it is the only drive on the bus.

I have a 2007 Macbook Pro that is running 10.7.5 and I am trying to use a 10.6.3 DVD to install Snow Leopard to an external hard drive.

I have a 2007 Macbook Pro that is running 10.7.5 and I am trying to use a 10.6.3 DVD to install Snow Leopard to an external hard drive. I've followed every possible instruction on every which website. The problem is when I boot to Install disc, I am unable to choose which hard drive I'd like to install the OS on. It says that it is unable to Install and automatically takes me to Restore and suggests that I restore to Time Machine backups. Any and all help is appreciated.

lovinlife5959,
have you tried booting from the grey Mac OS X Install DVD that originally came in the box with your MacBook Pro? See if you can install its version of Mac OS X (either 10.4.9, 10.4.10, or 10.5.0, depending upon when it shipped from the factory) onto your external hard drive. If that works, boot from your external hard drive, run Software Update on it, and then try updating your external drive to 10.6.3 via the white Snow Leopard DVD.

Hi, I had to re install my itunes library from a hard drive to my new laptop. Now I cant sync my iphone because itunes thinks all songs are new and basically doubling all albums. Should i restore iphone or is there a better way?

hi, i had to re install my itunes library from a hard drive to my new laptop. Now itunes thinks i am trying to add new albums and saying there isnt enoug space. should i restore or is there a better way.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

Before Mac OS X lion install I had over 50% free hard drive space on new MBP, but now my hard drive is full without me doing anything! How do I fix this??? Or should I just revert to Snow Leopard???

Before Mac OS X lion install I had over 50% free hard drive space on new MBP, but now my hard drive is full without me doing anything! How do I fix this??? Or should I just revert to Snow Leopard???

Sounds like the Time Machine Local Backup. Try turning Time Machine Off in System Preferences to verify.
See: OS X Lion: About Time Machine's "local snapshots" on portable Macs
But, your real problem is
I forgot to mention that I tried to use Disk Utility to Verify Disk, but it cannot. I get red errors that say the MacHD is corrupt and needs to be repaired. It says that in order to do this I need to use the Disk Utility on the install disk, but Lion doesn't have one!
Boot into Lion's Recovery (Hold ⌘R on Boot), select Disk Utility and then select Macintosh HD and click [Repair Disk]
Tony

Decrypt and Copy DVDs to Hard Drive easily and fast

Summary:DVD43 can’t work well on your Windows 8/7/XP/Vista
((64-bit)? Today we’ll look at drop dead simple method to decrypt and
copy DVDs with the best DVD43 alternative, so you can easily copy DVD
movies to your hard drive.
Have you ever wanted to make backup copies of your DVDs? DVD43 is a
very popular free DVD decrypter to help you decrypt DVDs on the fly so
that your DVD copy program can read DVD discs. Although DVD43 plug-in
have been released to bring wide compatibility with Windows 64 bits,
most DVD copy programs don't yet support decrypter plug-ins. Plus, DVD43
can't deal with the new DVD copy protection for its relatively slow
update. Therefore, in order to backup DVD effortlessly, you’d better to
find a DVD43 alternative to copy DVD movies on Windows(Windows 8) included.
In my view, a good alternative to DVD43 should be able to backup DVD
with high quality and supports various DVD disc types to suite your
needs. Here Brorsoft DVD Ripper
is highly recommend to you. With it, you can decrypt, copy your
protected DVD in Windows within a few simple clicks. Besides removing
DVD copy protection, you can copy DVD movies to hard drive with original
DVD structure or just backup the main movie as you want. What’s more,
it also enables user to rip and convert DVD to a wide variety of video
formats like MP4, MOV, M4V, MP4, WMV, AVI, MPG, FLV, MKV, etc for
different use. If you're looking for DVD43 alternative for Mac, please turn to DVD Ripper for Mac.
[How-to] Rip/Copy DVDs with Best DVD43 Alternative:
Step 1. Load DVD info > Insert a source DVD in optical drive. Install and launch the excellent
alternative tool for DVD43.
Click disc button to load DVD movies. You can select subtitles and
audio track (English, French, German, Spanish…) for each chapter. Forced
subtitles can be attained, too.
Step 2. Copy/backup your DVDs
Option A - "Full Disc Copy" without anything loss
Click quick button "Copy the entire disc" to starts copying disney DVD disc to hard drive maintaining the original structures.
Option B - Directly Copy DVD main movie only
P.S. If you want to encode your DVD media to a playable,
editable format, just click the Format bar and choose your desired
format from the drop-down list. Various output formats like MP4, MOV,
MKV, FLV, WMV, AVI, etc. are provided. Moreover, kinds of presets for
portable devices and video editing software like iPhone, iPad, iPod,
iMovie, Final Cut Pro, Samsung, HTC, Motorola, etc. are provided to help
you get videos with optimized settings to best fit your devices or
software.
Step 3. Start to rip and backup DVD on Windows > Click
“Convert” button to start converting, copying DVD movies using the
alternative to DVD43. When the conversion complete, you can get the
converted videos and store, play, edit and share them anywhere you like.
Editors' note: With decent decrypting capability, high
quality video output and considerate backup solution and specific format
templates for versatile PMP devices (iPad, iPhone, Apple TV, Xbox, PS3,
Android tablets and phones, etc), Brorsoft DVD Ripper ranks top on the
DVD ripping application list. Meanwhile Brorsoft provides excellent
customer support service, including lifetime free upgrade of product and
technical support. Users can contact the support staff via email for
help and suggestion.
Source:Get the Best DVD43 Alternative to copy DVD movies
[quote] androidiosconvertertips.altervista.org/blog/alternative-for-dvd43-decrypt-and-copy-dvds-to-hard-drive-easily-and-fast/ [/quote]

What you want to do is select the files you want to move then go File>Relocate Masters. Your images will then be referenced to a location you select. Aperture will still continue to manage the images, but the external hard drive must be connected if you want to make adjustments. Aperture will retain Metadata and any adjustment information. Your original images will stay unmodified on your external drive.
Jeff

Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

New Mac user-External Hard Drive question...

Just purchased my 1st Mac/the new Mac mini. Arrived today & am very impressed.
Set-up, right out of the box, was incredibly SIMPLE and I cant believe what a little dynamo this thing is! I've thought about 'switching' to a Mac from PC for quite a while, but was always a little nervous, so I've patiently watched & waited from the sidelines- until now - and it was well worth the wait.
My 'question' is, can anyone recommend a good external hard drive I can use interchangeably between my PC & my new Mini? Still using the PC until I get completely acclimated with Mac platform/etc - I'd like something with at least
1TB storage. Thanks!

derosky wrote:
I'm a new Mac user. My question is: Do I need a external hard drive to create a back up? Can I create abackup on a DVD or Hard Drive in MB. Please explain this to me. When I want to configure Time Machine it displays me no Drives to create a back up.
Time Machine requires an external hard drive
You can back up by other means to CDs or DVDs
If you are a .MAC customer you get a decent backup program that backs up to your iDisk and/or to CD-DVD
You would NOT want to back up to your internal drive since that would accomplish nothing - a dead or messed up HD is no good for either the beginning part of the other part where the backup is
LN

How do I install Lion on a 2nd (SSD) hard drive?

I installed and formatted a 128 GB solid-state drive (SSD) on my Mac Pro. (My Mac Pro has four drives: a hard drive with Lion, a hard drive with Leopard for a legacy app, a hard drive for Time Machine, and the new SSD.) I went to the app store to download Lion to install on the SSD but I can't figure out how to download it. The download button says "Installed." Rebooting from the Leopard hard drive won't work because Lion can only be installed on a computer running Snow Leopard. (I tried to update the Leopard hard drive to Snow Leopard but for unknown reasons it won't let me.) I looked for the Lion Installer in my Downloads folder but I can't find it there. What should I do?
A good answer would be to return the SSD! I've spent hours trying to install this, to make my computer a couple seconds faster. The first 2.5" to 3.5" drive adapter didn't work because it was made for computers with cables, not for computers with sleds. Finding the right adapter was a challenge (and cost $40).

You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.

The first time I connected my new My Passport portable hard drive to my Mac, the message asking if I want to use the drive to back up with Time Machine did not appear. What is the next step?

The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear. I would like to set it up to do this. What would my next step be?

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine.

I am using FCPX 10.1.3. and want to duplicate my project, and its complete resources, to a different hard drive. When I click "duplicate", it automatically duplicates the project in its current hard drive. How do duplicate to a different hard drive

I am using FCPX 10.1.3. with Yosemite, and want to duplicate my project and its complete resources to a different hard drive. When I click "duplicate", it automatically duplicates the project in its current hard drive, unlike the previous FCPX that gave you options. How do duplicate to a different hard drive?

Since projects are now stored in events and events are stored in libraries, you need to create a new l;bray on that different drive or open an existing library on that drive. Then duplicate your project and move it to the new library. It will copy the media. Then use the Consolidate Project File command to round up any external assets; there may or may not be any.
Russ

Copying from dvd to hard drive. processs freezes

copying a MP4 from dvd to hard drive. 95% complete then frozen. unable to stop download, or eject dvd. what now?

Open Activity Monitor in Utilities, highlight Finder & Force Quit it, it'll reastart Finder.

How do I create a new folder in my hard drive - free agent go flex drive - on the mac book air?

I have just starting using a macbook air 13" and trying to sort out my folders, therefore trying to create a new folder within my hard drive, but the option is not coming up when I right click.

FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
If you want to run Mac and Windows at the same time, you could do what I did:
Get Parallels
Install Windows as VM on top of Parallels
Install Office in Windows
Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

Installing Complete New Yorker DVDs on hard drive

Similar Messages

Maybe you are looking for