Installing / Configuring BW with miniWAS

Hi...
I have a some questions regarding the installation and configuration of MiniWAS and BW,
First of all, I have an IDES version of BW and miniWAS
1) Can i configure BW with MiniWAS(SAP DB)? Yes or No ?
2) Can I install BW on an EXTERNAL HARD DISK (80GB) which has an Operating System installed on it? and get connected thru the USB of the Ext-Hard Disk
to my LAPTOP which has miniWAS installed? (The main question is does BW require a Processor? As such External HD doesn't have any processors..?) .
I guess u can suggest me about installing on BW on Desktop and miniWAS on LAPTOP start learning.. I travel frequently sometimes 5hrs I cannot carry a desktop in that situation (hahaha) and I want to learn BW also in such traveling.. would be thankful if anyone can help me out in this..
Thanking you for your time and consideration...
In one of the Thread I have seen for MINISAP we don't have tables of MARA,LFA1.. etc., is it possible to Upgrade ur SAPDB with these Tables.. like how we can Transfer some CUSTOM TABLES.. I hope am not confusion u all with too many questions. ...
Cheers.
PREETHU

The following is the PROBLEM which am getting while Installing MINIWAS on WINXP.. ANYONE PLS HELP ME...
r3setup\SAPCAR.EXE
       15 file(s) copied.
INFO 2005-03-20 00:37:49 Main
    r3setup started
INFO 2005-03-20 00:37:49 Main
    InstController has been successfully created
INFO 2005-03-20 00:37:50 Main
    Command line options are ok.
INFO 2005-03-20 00:37:56 InstController Prepare:0
    R3SETUP Version: Apr 24 2002
INFO 2005-03-20 00:37:56 InstController Prepare:0
    Logfile will be set to
    C:\DOCUME1\Kr\LOCALS1\Temp\BSPinst\BSP.log
        Check C:\DOCUME1\Kr\LOCALS1\Temp\BSPinst\BSP.log for
    further messages.
INFO 2005-03-20 00:37:59
    Requesting Installation Details
INFO 2005-03-20 00:37:59
    Requesting Information on CD-ROMs
INFO 2005-03-20 00:37:59 CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck:0
    The installation phase is starting now. Please look in the log
    file for further information about current actions.
INFO 2005-03-20 00:37:59
    Requesting Installation Details
INFO 2005-03-20 00:37:59
    Defining Key Values
INFO 2005-03-20 00:37:59
    Requesting Setup Details
INFO 2005-03-20 00:37:59
    Requesting Installation Details
INFO 2005-03-20 00:37:59
    Setting Users for Single DB landscape
ERROR 2005-03-20 00:38:06 ADADBSTOPLOCAL_NT_IND InternalWarmKeyCheck:0
    The function OpenSCManager with the parameterlist
    (ServicesActive) returned with error code 1722 and error text:
    The RPC server is unavailable.
ERROR 2005-03-20 00:38:06 ADADBSTOPLOCAL_NT_IND WarmKeyCheck:0
    Phase failed.
ERROR 2005-03-20 00:38:06 Main
    Installation aborted.
There was a problem during install.
Try to solve the problem and restart the setup with this batch.
Press any key to continue . . .
pls help
PREETHU

Similar Messages

How to install & configure OBIA with Informatica & DAC in oracle R12.

Hello,
I have OBIEE 11.1.1.5 on windows and oracle EBS R12.1.1 on server, and i have to install OBIA 7.9.6.3, Informatica 9.0.1 Hotfix 2 and DAC 10.1.3.4.1 on windows, and i don't know how to interconnect with each other.
So could anyone has the step by step installation & Configuration process then please guide me.
Thanks & Regards,
Yogesh.

You'll interconnect them using database connections and server details.
For the same check this link http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/toc.htm
Appreciate if you mark as correct.

Install & configure lirc with an audigy platinum

Hello all the community,
Actually I try to configure lirc to manage my remote.
I'm using an audigy platinum 2zs pro, with an rm-1500 remote.
It worked when I was on debian, I just follow this : http://alexandre.touret.free.fr/dotclea … tinium-pro [fr]
But actually I can't locate the problem, I first installed with pacman and now this the source, using the livedrive_midi driver in the configure.
After configure, make & make install I did :
$ echo -e '\360\000\040\041\141\000\000\000\177\000\367' > /dev/snd/midiC0D1
# /usr/local/sbin/lircd -d /dev/snd/midiC0D1 -H livedrive_midi
$ irw
Irw work but when I push some buttons, nothing append.
In the log (var/log/lircd) :
May 10 05:43:15 mars lircd: lircd(livedrive_midi) ready
May 10 05:43:18 mars lircd: accepted new client on /dev/lircd
May 10 05:43:27 mars lircd: removed client
I read, that a led is supposed to turn on when the hub is ready.
I'm a little bit lost because everything seems to be correct.
Thx for help.

Yes when you compile from the source, binary are in the /usr/local.
In fact I just solved the problem, but I can't explain how. I tried to install lirc with a live cd of kubuntu, and it works, the led of the hub started lighting, after I come back to arch and it works again without any changes.
A little miracle

Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error

Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.log

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

How to install,configure and work with omniportlets

Hi,
What are the steps i need follow to install and work with omniportlets.
What are the softwares in need install. Please give required steps.
I downloaded.
1.PDK-Java software, PortalTools (OmniPortlet & Web Clipping), and common libraries
2.Download the preconfigured OC4J.
Is there any additional softwares needed.
I should install Application Server 10g?
I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
Thanks.
NR

Hi,
working with omni portlets they given two installation methods.
1. the preconfigured standalone OC4J with OracleAS PDK.
2 Iinstall OracleAS Portal as part of the Oracle Application Server release, then most of the configurations are already done.
I have
OS: Redhat Linux 4
Browser:Mozilla firefox 1.5.0.3
database:Oracle10g.
I performed 1 method but while openig link http://172.16.122.249:8888/portalTools/omniPortlet/providers/omniPortlet
i am getting the error
Error occurred while rendering Provider Test Page - view the HTML source for more details
I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
what installations i need to done.
Please help me.Thanks
NR

How to install & Configure HTMl DB with Ora 9.2 Database

Hi,
I have oracle 9.2.0.4 database installed. I have to install & configure HTML DB to use this database & from sites i have come to know that i can associate it with Ora 9.2 HTTP server too. Can some one explain me if HTTP DB can be installed & configured to user Ora 9.2 Database & HTTP Server. If its possible then pls let me know the steps to follow. Currently i have just ora 9.2.0.4 database installed.
Regds
Rajan Kumar

Rajan,
Please refer to this document: http://www.oracle.com/technology/products/database/htmldb/howtos/howto_use9ir2ohs.html
Thanks,
- Scott -

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

I want to scan within Mac Photoshop CS6 with my Brother MFC-8950DW, what should I do/install/configure?

I want to scan within Mac Photoshop CS6 with my Brother MFC-8950DW, what should I do/install/configure?

Hi Alain,
Please refer the KB :http://helpx.adobe.com/photoshop/kb/sacnning-photoshop-cs6-mac-os.html
TWAIN plug-in | Photoshop CS4, CS5, CS6
Regards,
Rave

Installing and Configuring OBIA with OBIEE, Informatica, DAC

Hi
Can anybody send me set up procedure for , how to install and configure OBIA with OBIEE, Informatica and DAC?
mail Id : [email protected]
Thnks In advance.

Hi,
the setup procedure depends on your Oracle BI Apps version.
You can find all Oracle documentation to install and configure Oracle BI Apps from this URL :
http://www.oracle.com/technetwork/middleware/bi-foundation/documentation/bi-apps-098545.html
hope it helps,
Benoit

Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.

Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Configuring php5 with enable XML on OAS 10.1.3.x

My requirement is to enable XML on OAS 10.1.3.5.
I am not sure how to configure it, so I stated using separate PHP5.2 to configure with XML enable on the server. After installation, when I am starting the opmn services I am getting below error. I think the error with platform. Which means current OS version is 64bit and php5.2 stage is 32bit version I guess.
OAS_HOME=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS
URL : http://nacisdell277.us.oracle.com:10330/phpinfo.php
I used below command to configure :
./configure prefix=$ORACLE_HOME/php with-config-file-path=$ORACLE_HOME/Apache/Apache/conf --with-apxs=$ORACLE_HOME/Apache/Apache/bin/apxs
with-oci8=instantclient,/u20/app/MSRV1P/apmsrv1p/oracle/product/instantclient_10_2 with-config-file-path=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/php5--enable-sigchild enable-xml enable-simplexml enable-libxml enable-dom enable-simplexml enable-xml enable-xmlreader enable-xmlwriter enable-simplexml –with-xsl -with-zlib with-xml --with-libxml-dir
Error :
/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 247 of /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/conf/httpd.conf:
Cannot load /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so into server: /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so: wrong ELF class: ELFCLASS64
I checked in the Metalink for “configuring php5 with enable XML on OAS 10.1.3.x” but I couldn’t find anything.
Please advise me on this.
Thanks

Hello;
You can try installing glibc-devel to fix this.
However on my version :
Application Server Control Release 10.1.2.3.0 - PHP 5 does not seem to work. The conflict on mine is that PHP 4 came wrapped in the Oracle install and they don't play well together.
Make sure your httpd.conf does not have this in it :
LoadModule php4_module libexec/libphp4.soI'm NOT advising you to remove it if its there, I'm merely pointing to a possible conflict.
Best Regards
mseberg
Later
Glad you don't have the same version as me. Hard to find anything on this, found these ( Not exact matches )
http://php.net/manual/en/oci8.installation.php ( Search for ELF )
http://enlinea.creaelicita.cl/guia/oci8.setup.html
http://docs.oracle.com/cd/E17390_01/doc.650/e17370.pdf
Found this in the pdf : ( Similar )
If the following error is received:
*ERROR* - obssocookie: could not dlopen()
/opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so:
/opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so: wrong ELF class:
ELFCLASS32
This indicates that the 32-bit version of the Access Gate SDK was installed instead of
the required 64-bit version. Edited by: mseberg on Feb 4, 2012 5:53 AM
Still later
Another thought is the PHP forum :
PHP
Also you need the 32bit Instant Client to be able run PHP. See http://blogs.oracle.com/opal/entry/using_php_oci8_with_32-bit_php
Same OS message :
ORA-03106: fatal two-task communication protocol error
Edited by: mseberg on Feb 4, 2012 7:03 PM
Rogue Notes from my Fusion Middleware on Red Hat 5 64 bit
I downloaded php-5.3.5.tar.gz from http://www.php.net/downloads.php.
Download the OCI headers http://www.oracle.com/technetwork/middleware/ias/ociheaders-134541.tar
environment
export ORACLE_HOME=/u01/app/oracle/product/fmw/oracle_pfrd
export ORACLE_INSTANCE=/u01/app/oracle/product/fmw/fr_inst
export CONFIG_FILE_PATH=$ORACLE_INSTANCE/config/OHS/ohs1
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ohs/lib:$LD_LIBRARY_PATH
Configure with Oracle Database (OCI8) support:
./configure with-apxs2=$ORACLE_HOME/ohs/bin/apxs prefix=$ORACLE_HOME with-config-file-path=$CONFIG_FILE_PATH with-oci8=$ORACLE_HOME --disable-rpath
httpd.conf
# And for PHP 5.x use:
AddType application/x-httpd-php .php .phtml
Edited by: mseberg on Feb 4, 2012 7:19 PM
Edited by: mseberg on Feb 5, 2012 11:48 AM

Mupen64Plus 2.0 hg in AUR; HOW TO install & configure controllers

With version 2.0 Mupen64Plus has undergone large changes "under the hood". Mupen64Plus is now modular, and as such the standard plugins has been split into several different packages/repositories. At the moment there exists the following modules:
* mupen64plus-core
Core module of the Mupen64Plus project
* mupen64plus-ui-console
Console (command-line) front-end user interface for Mupen64Plus v2.0 project
* mupen64plus-audio-sdl
Audio plugin for the Mupen64Plus v2.0 project, using SDL. This plugin is based on the original jttl_audio plugin in Mupen64.
* mupen64plus-input-sdl
Input plugin for Mupen64Plus v2.0 project using SDL. This is derived from the original Mupen64 blight_input plugin.
* mupen64plus-rsp-hle
RSP processor plugin for the Mupen64Plus v2.0 project. This plugin is based on the Mupen64 HLE RSP plugin v0.2 with Azimers code by Hacktarux
* mupen64plus-video-rice
Video plugin for the Mupen64Plus v2.0 project, using OpenGL. This plugin is based on the RiceVideoLinux plugin from earlier versions of Mupen64Plus.
Note however, that mupen64plus-core (or mupen64plus-core-hg on AUR) is just the core, and does not include a frontend. The Qt and GTK frontends have been scrapped, though, and the only existing frontend so far is mupen64plus-ui-console, which is a CLI frontend. You launch a game with mupen64plus-cli, see mupen64plus-cli --help for more information. As a sidenote, I believe that the Mupen64Plus team would appreciate if someone helped with creating a GTK frontend, since I believe the head developer(s) will probably be focusing on the Qt frontend if any.
The Rice Video plugin in Mupen64Plus 2.0 fixes a problem that at least I and another person had with xf86-video-ati and the old Rice, which made us unable to play in fullscreen.
Installing
To get Mupen64Plus 2.0 working, you will need to install all six modules. They are all part of the mupen64plus-hg group, but unfortunately neither yaourt nor the AUR web interface supports groups as far as I know, so you will have to install each module separately. With yaourt:
yaourt -S mupen64plus-core-hg mupen64plus-ui-console-hg mupen64plus-audio-sdl-hg mupen64plus-input-sdl-hg mupen64plus-rsp-hle-hg mupen64plus-video-rice-hg
The only way I can think of to make it easier to install, would be if I created an empty PKGBUILD that simply depended on all the modules, but I find this to not be a technically elegant solution.
Configuring controllers
With Mupen64Plus 2.0, a feature has been added to auto-detect and auto-configure USB controllers, but at the time of writing only a handful of controllers are supported:
* Logitech Dual Action gamepad
* Logitech Cordless Rumblepad 2
* Microsoft X-Box 360 pad
* N64 controller
* SAITEK P880
* Mega World USB Game Controllers
You know your controller isn't supported if you get the following messages when running mupen64plus-cli:
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
Input Warning: No SDL joysticks found
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
If it is supported, you will get something like:
Input: N64 Controller #1: Enabled, using auto-configuration for joystick 'YOUR CONTROLLER NAME HERE'
Input: 1 SDL joysticks found, 1 plugged in and usable in the emulator
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
Now, if your controller isn't supported, there are two things you can do, and I strongly recommend that you do the first, but you will probably want to do both unless you're patient (if your controller works, but you want to configure it, skip to step two):
Step 1:
Follow the intructions on http://www.emutalk.net/showthread.php?t=49731. If you have the old config file, but no longer have Mupen64Plus 1.5 installed and therefore cannot follow step 8 in the post, the controller name shown in
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
will work too. This will allow the Mupen64Plus team to include your controller for auto-detection.
Step 2:
Now you will probably want to configure the controller, especially if it wasn't supported already. You will need to edit the config file ~/.config/mupen64plus/mupen64plus.cfg, since no GUI frontend exists yet. Since revision 55 of mupen64plus-core, Mupen64Plus will create the config file if none exists when launching a game (previously you had to run mupen64plus-cli with the flag --saveoptions to create the config file). Mupen64Plus does not need a config file to run, but if you wish to tweak the settings you will need it.
Now, the section you will be interested in is [Input-SDL-Control1] (and possibly the other controller sections). If your controller is supported already, you will see some default settings and it will be quite easy to edit them. Otherwise the sections will be completely empty. Here follows my [Input-SDL-Control1], which you can copy and change to fit your needs. If you have your blight_input.conf you can use it as a reference to make it easier. For a list of options, see http://www.emuwiki.com/index.php?title= … #Input-SDL.
[Input-SDL-Control1]
# Specifies whether this controller is 'plugged in' to the simulated N64
plugged = True
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 5=Rumble pak
plugin = 1
# If True, then mouse buttons may be used with this controller
mouse = False
# Specifies which joystick is bound to this controller: -1=None, 0 or more= SDL Joystick number
device = 0
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
AnalogDeadzone = "4096,4096"
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
AnalogPeak = "32768,32768"
# Digital button configuration mappings
DPad R = "hat(0 Right ) "
DPad L = "hat(0 Left ) "
DPad D = "hat(0 Down ) "
DPad U = "hat(0 Up ) "
Start = "button(9) "
Z Trig = "button(7) "
B Button = "button(0) "
A Button = "button(2) "
C Button R = "axis(3+) "
C Button L = "axis(3-) "
C Button D = "axis(2+) "
C Button U = "axis(2-) "
R Trig = "button(6) "
L Trig = "button(4) "
Mempak switch = ""
Rumblepak switch = ""
# Analog axis configuration mappings
X Axis = "axis(0-,0+) "
Y Axis = "axis(1-,1+) "
Note:
At the time of writing there is a bug in the parser which requires the extra space after the direction in the hat event, for example "hat(0 Up )". Otherwise it will read the direction as (in this case) "Up)" which is invalid and will be ignored. The trailing space after the ending parantheses is not required, and is merely a side effect of how the program that generates the config file works.
Note that you can combine options:
A Button = "button(2) key(38) mouse(1)"
This will map both button 2 on the controller, key 38 on the keyboard and the left mouse button to the A button in Mupen64Plus.
If anyone encounters any other problems, feel free to ask.

Dheart wrote:...
Someone should add this to "READ BEFORE POSTING"
This is not Ubuntu forum. You shouldn't EVER post such howto on the forum, we have a wiki for that reason. That thing you've written should go the wiki and then post a topic at wiki discussions and ask for opinion.
Please, don't do that again, just contribute to the wiki.
Yes, I'm quite aware that the wiki exists. The reason I'm writing it here is that the GUI frontends will probably come quite soon, and overall this is an early version. I don't see a reason to contribute this to the wiki when it will probably be unneeded and out-of-date relatively soon.

MMS not working in iPhone4S when installing config profile with APN

When we use the iPhone Configuration Utility (either the latest version or previous versions) to create a config profile with APN info, then install the profile to an iPhone4S, we noticed that MMS (multimedia messaging) was no longer working. This means we could not send or receive MMS messages. And this is MMS going over the MMS protocol (and not iMessage). We had not seen this before. We routinely do config profiles with APN info and have done for all iPhone models and iOS version before the new iPhone4S. Never had a problem with MMS or anything else. This is for iPhone4S devices in the AT&T network. It is easy to reproduce and you don't need an enterprise APN for that. In fact just a config profile with AT&T's APN settings will still break MMS when installed (other than the MMS, everything else works fine).
It does not appear an iOS 5 issue. iPhone4 (or iPhone3GS) with iOS 5 do not have this problem. It appears to be tied to the new iPhone4S hardware. The same configuration profile (with the APN info) works fine on iPhone4 with iOS 5 (MMS works fine), but when you put the very same configuration profile to an iPhone4S, MMS quits working.
Doing a network reset does not solve the problem. Only removing the profile fixes the MMS
Any ideas, explanations or workarounds?

I called the Apple care line, and eventually got to 4th tier support, where they declared that there must be an issue with the APN I'm using, regardless of the fact that none of the iPhone 3G, 3GS', and 4's in our office are experiencing this issue while using the same APN. I guess I shouldn't be surprised about this, afterall who'd expect Apple to actually admit there's a "bug" in one of their products, especially since this is hapenning to a very small number of users on the 4S. Getting to 4th tier support was free, but to be able to talk to someone who can actually investigate this issue will cost $700.
I offered to give them access to our private APN for testing, but they were "unable to do that sort of testing". Additionally, we have tested using a public APN from AT&T (wap.cingular), and still experience the same issue.
Lastly, I did some further digging, and I think it has something to do with PDP Context 2 not getting an IP address. As a disclaimer, I have no clue what a PDP Context is, what it does, what it's for, but obviously MMS needs it. Going into field test mode on the phone will allow you to see the PDP Contexts, and is where I got this info from.
On the iPhone 4S, without an APN profile installed, the PDP Contexts are listed 0-3. These 4 contexts have values for an APN, and an IPv4 address, although context 0 and 2 are the only ones that have values in them.
When an APN profile isnt installed, MMS' can be sent, cellular internet doesn't work., the values are:
Context 0
IPv4:    ip is blank
APN:   phone (this is the default APN for the iphone 4s on att).
Context 2
IPv4:     has a valid public IP address
APN:     wap.cingular
When an APN profile is installed, MMS's can't be sent, but cellular internet does work, the values are:
Context 0:
IPv4:     Valid public IP address is present
APN:     Our enterprise APN
Context 2:
IPv4:     ip is blank.
APN:     wap.cingular
It appears that when Context 2 has an IP address, MMS' are able to be sent. One other interesting fact, on the iPhone 4, only 1 PDP Context is listed, while the 4S has 4 listed.
Hopefully this issue will be resolved in the 5.1 update, as this update contains a baseband update for the 4S, updating it from 1.0.14 to 1.2.01-1. Unfortunately I don't have access to a 5.1 beta, otherwise I'd test this my self. If anyone has access to the beta, and wants to test APN profiles/MMS send status, we'd greatly appreciate it!

Installing / Configuring BW with miniWAS

Similar Messages

Maybe you are looking for