Installing CRS

I have a 3 node Win2003 and i'm trying to install CRS (10.2.0.1 to be patched)
This is my problem:
Net Admin created TEAM-PRIVATE and TEAM-PUBLIC
when i'm prompted to Specify Network Interface Usage
i have this:
Interface name | Subnet | Interface Type
PUBLIC-TEAM |172.16.101.0 | Private
2-TEAM |172.16.4.0 | Public
where that "2-TEAM" is taken???
i asked to have the team name changed in PUBLIC and PRIVATE and the result is:
Interface name | Subnet | Interface Type
PUBLIC |172.16.101.0 | Private
2 |172.16.4.0 | Public
Where is the name taken??
Can i continue the installation and change before creating database??
thanks in advance

I know it sounds petty - but could you try PublicLAN and PrivateLAN for the adapter names on all nodes
Philip...

Similar Messages

Root.sh failed on second node while installing CRS 10g on centos 5.5

root.sh failed on second node while installing CRS 10g
Hi all,
I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
user on second node of the cluster, it fails with following error message:
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
and run cluvfy stage -post hwos -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking shared storage accessibility...
Disk Sharing Nodes (2 in count)
/dev/sda db2 db1
and run cluvfy stage -pre crsinst -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
No checks registered for this product.
and run cluvfy stage -post crsinst -n all -verbose,it show message:
Result: Node reachability check passed from node "DB2".
Result: User equivalence check passed for user "oracle".
Node Name CRS daemon CSS daemon EVM daemon
db2 no no no
db1 yes yes yes
Check: Health of CRS
Node Name CRS OK?
db1 unknown
Result: CRS health check failed.
check crsd.log and show message:
clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
clsssInitNative: connect failed, rc 9
Any help would be greatly appreciated.
Edited by: 868121 on 2011-6-24 上午12:31

Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
Public IP addresses and virtual IP addresses must be in the same subnet.
In your case, you are using two different subnets for the VIPs.

Install CRS and RAC with different users

I' m tring to install CRS and RAC with different users.
It is supported but I don't find documentation.
Have someone experience with this configuration ?
My question are related to permission/own of voting and ocr file.
in this configuration is CRS owner or DB owner that run srvctl commands ?
Thanks !

Yes it is ... check out the RAC FAQ on metalink, and just as Chris metioned the users will need to have the oinstall group as their primary..
"Is it supported to install CRS and RAC as different users.
Yes, CRS and RAC can be installed as different users. The CRS user and the RAC user must both have "oinstall" as their primary group, and the RAC user should be a member of the OSDBA group.
Modified: 09-SEP-04 Ref #: ID-5769 "

Install crs for rac

Hi,
I have somme problems whe i install crs 10g.
I have this error message where i run call D:\oracle\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig ocr upgrade failed with (-1)
I d'ont know why
Regards

You don't know why it failed and neither do we based on what you wrote.
1. We don't know what operating system you are using
2. We don't know what version of the Oracle database.
3. We don't know what edition of the Oracle database.
4. We don't know if you ran the cluster verify utility and if so what it reported.
5. We don't know what you intend as your shared storage solution.
What we do know, unequivocally is that the "D" drive is not shared storage as required by RAC.
Provide a full and complete RAC-relevant description of your hardware and operating system environment.

Error in Installing CRS

Hi all,
i am getting the following while installing CRS.
Output generated from configuration assistant "Oracle Clusterware Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
The "E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.----------------------------------------------------------------------------
How to resolve ?-

Hi all,
i am getting the following while installing CRS.
Output generated from configuration assistant "Oracle Clusterware Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
The "E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.----------------------------------------------------------------------------
How to resolve ?-

Clone RAC Install - CRS and RDBMS Homes

Hi All,
I have used the clone option with oui to clone an existing Oracle RDBMS home as per Metalink article 300062.1.
I am interested in cloning a RAC install , including CRS nd RDBMS homes , and can see that the clone directory exists , so assume it must be possible, does anyone know if there are specfic instructions on how to clone a CRS/RAC install ?
Thanks,
Darrell

Please go with links:------------
www.oracle.com/database/rac_home.html -
www.oracle.com/technology/products/database/clustering

Install CRS so ASM can share diskgroups accross instances

I saw a note in a 10.1 document that mentions CRS can be used to allow ASM instances to share disk groups and that this configuration does not require a RAC license if single instance databases are being used.
We have a scenario in our development and test environments where clustered databases are not required but I would like to set up ASM similiar to production for consistency purposes.
Is anyone familiar with this? Is there any difference between this type of CRS install and one for RAC databases?

OK so you start off pretend that you are going to install RAC.
You install the clusterware onto your nodes
Then you install ASM onto your nodes
and create network listeners and ASM instances / diskgroup(s)
Then - you do not install the RAC database
instead you may wish to install a new database home that has RAC linked off and then use dbca to create single instance databases - you put the datafiles on asm by specifying something like +DATA (for the DATA) diskgroup

Pros and Cons of installing CRS, ASM and DB in separate homes

Planning to install 11gR1 RAC a 2 nodes on HPUX IA64 and there are several architecture options:
Option 1: same owner and one single home (home1 = crs asm db)
pros - easier to patch on single home
cons - patch level may be required at crs level but not allowed at db level because of E-Business Suite certification constraints
Option 2: same owner and 2 homes (home1 = crs / home2 = asm db)
pros - one less home to upgrade
cons - ?
Option 3: same owner and 2 homes (home 1 = crs asm / home2 = db)
Is there any reason why Option 3 would be preferable or worse than Option 2?
Option 4: same owner and 3 homes (crs home / asm home / db home)
pros - each home can be on different patch levels
cons - more storage, more maintenance when patching
Any comments?

I've made my decision to use Option 2 and here's why...
Excerpt from Known issues documented in
810663.1 11.1.0.X CRS Bundle Patch Information
CRS Bundle Patch has been renamed as CRS PSU. CRS PSU and Database PSU are two separate patches, i.e. Database PSU does NOT include the CRS PSU.
There should be no conflict or overlap between a CRS PSU and an RDBMS PSU -- both should be applied to the ASM and DATABASE Homes.
Also note that CRS PSU's can be applied to all homes (CRS, ASM and RDBMS). The general recommendation is to apply the bundle patch to all homes unless the homes are on a different patch level. This is because there are clusterware binaries in the database home (e.g.: srvctl).
PSUs for the RDBMS should be applied to the ASM and RDBMS homes.

Cannot install CRS on AIX 5.3 ML09 with HACMP 5.4.1

We have a two-node HACMP cluster, it's handling the networking and storage. (raw LV's) It's a fairly simple setup. I followed the instructions in document 404474.1 "Status of Certification of Oracle Clusterware with HACMP 5.3 & 5.4" to ensure it's compatible.
Full OS and software Versions:
AIX 5.3 ML9 (53-09_SP1_5300-09-01-0847)
HACMP 5.4.1.4
Oracle 10gR2 (10.2.0.1 from the install media, DBA will be updating to .3 or .4 after install)
We've run the cluvfy script. It does complain about some missing patches; however, I've verified that none apply to our system. Ie, some of the patches apply to previous AIX ML, etc. Cluvfy does, however, detect the presence of the cluster and successfully collects the networking info from both nodes.
So, the cluster is running, we run rootpre.sh successfully on both nodes. It properly detects the presence of the cluster and successfully makes several changes to the system.
Next, we fire up the installer. (runInstaller) We provide it with the details for the various directories and what-not, everything is successful until we get to the "Specify Cluster Configuration" screen. It's blank. For some reason, it's not talking to the HACMP and can't acquire any of the cluster configuration data. There are no errors in any logs. We ran the installer through truss at the request of Oracle support, but it didn't seem to show us anything useful.
Has anyone experienced this before? Is there something we need to do in order for the installer to communicate with HACMP?
Thanks!
Adam

Dear Kushan,
Few hints from my side
1) For ECC 6.0 EHP4 -> First ECC 6.0 will be installed on NW7.01 stack. Later you will need to use ehpi tool to upgrade to EHP4.
2) For SCM 7.0 plan the resource allocation for Livecache and Optimizer server. Ensure that they have ample resources for operation.
Regards,
Deepak Kori

Hint : installing CRS on RHEL4 10.2 DB using Putty

If you run into the a problem running the installer - i.e. sequence too long , then this may be a bug in Putty.
It only shows up if you are using Putty /SSH as an X-Tunnel to your client -e .g. Reflection, NCD X-Ware
There's a bug in Putty 0.58 and before, if you download the latest dev snapshot of the Putty.exe from Simon Tatham's website the problem goes away...
Chris

The quicker way is to use sofware only method to install 10204 oms and dirctly use 10203 datbase directly as a oms repository.
Check the section Installing 'Software-Only' and Configuring Later
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#CCHGBDCB

Install 10g RAC on solaris10(x86) in VMware,but failed on crs's root.sh

VMware server 1.0.4 build-56528
bash-3.00# uname -a
SunOS rac02 5.10 Generic_118855-33 i86pc i386 i86pc
disk information:
format->partition->print,this is the result
Current partition table (original):
Total disk cylinders available: 3580 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 usr wm 3 - 5 6.00MB (3/0/0) 12288
1 usr wm 76 - 95 40.00MB (20/0/0) 81920
2 backup wu 0 - 3579 6.99GB (3580/0/0) 14663680
3 usr wm 96 - 2000 3.72GB (1905/0/0) 7802880
4 usr wm 2001 - 3579 3.08GB (1579/0/0) 6467584
5 usr wm 6 - 75 140.00MB (70/0/0) 286720
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 2.00MB (1/0/0) 4096
9 unassigned wm 0 0 (0/0/0) 0
i want to save ocr and voting on raw partition,ocr on 5(140m) and vot on 1(40m)
then,i do as this,
bash-3.00# ln -s /dev/rdsk/c2t0d0s5 /orac/ora_ocr
bash-3.00# ln -s /dev/rdsk/c2t0d0s1 /orac/ora_vot
bash-3.00# chown -RL root:oinstall /orac/ora_ocr
bash-3.00# chown -RL oracle:oinstall /orac/ora_vot
bash-3.00# chmod 777 /orac/ora_ocr
bash-3.00# chmod 777 /orac/ora_vot
this is the error message:
bash-3.00# /orac/crs/product/10.2.0/root.sh
WARNING: directory '/orac/crs/product' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/orac/crs/product' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac01 node1 rac01
node 2: rac02 node2 rac02
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /orac/ora_vot
CLSFMT returned with error [4].
Failed to initialize Oracle Cluster Registry for cluster
0
What is wrong?
I have other questions,
A.Before install CRS,do i need some packages?SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt,install guide told me these packages is necessary,but someone told me it wrote for solaris 9
B.How can i use the raw device?
C.Do i need the sun cluster?

These machines are in vmware server,and I use "vmware-vdiskmanager -c -s 250Mb -a lsilogic -t 2 "D:\10gRAC\votedisk.vmdk"" to create the shared storage.
-thanks

Crs install fail

Oracle 10g
Red Hat linux
hi all,
I'm trying to install crs 10.2.0.1 on rhel5.4 64 bit
all goes well untill the end of the install, and I have to run root.sh, but it says: failed to upgarde oracle cluster registry configuration.
Please help, have no idea what to do next

See the old forums
Re: Cant not run root.sh u01/app/oracle/product/10.2.0/crs/install/rootinstall:
libclntsh.so.10.1: file too short
Hope this helps,
Regards
http://www.oracleracexpert.com
Flash Recovery Area in Oracle 10g
http://www.oracleracexpert.com/2010/03/flash-recovery-area-fra-in-oracle-10g.html
Unable start RAC instance on Node2 after applying patch
http://www.oracleracexpert.com/2010/03/unable-to-start-rac-instance-after.html

Root.sh hangs in CRS install on first node

Hi all,
I am installing CRS 10.2.0 in RHEL 5 on VMWARE.when It is asking for two scripts(oraInstRoot.sh and root.sh) as a root user.First script completes with out any error on both nodes while root.sh script hangs in first node at line
Startup will be queued to init with in 90 seconds
I have checked for error in /tmp/crsctl. below is error
Failure at SlfAccess(/u01/crs/oracle/product/10.2..0/crs/bin) with code -1
Internal Error Information:
Category: -5
Operation: access failed
Location: SlfAccess
Other:
Dep: 2
Kindly share if any one has solved above error.
thanks
Latif

Hello,
Your problem is indeed Bug: 4679769. Our output of the tracefile explains this.
You need to download the patch, apply it.
But before you run root.sh again, clean the ocr disks. (both) using dd.
when done you can just reexecute the root.sh script again.

CRS HOME & 9iR2 RAC ORACLE_HOME Different Owners

Facts:
2 Node Cluster, Sun T2000
O/S: Sun Sparc Solaris 64 bit 5.10
3rd Party Clusterware - Veritas Storage Foundation for RAC (SFRAC) 5.0 MP3
CRS: 10.2.0.4
CRS is owned by oracle:dba (with the exception of anything owned by root)
9iR2 (9.2.0.8) RAC RDBMS ORACLE_HOME is owned by oraofsg:dba
9iR2 (9.2.0.8) RAC Database Name: ofsg
10gR2 (10.2.0.4) RAC RDBMS ORACLE_HOME is owned by oracle:dba
Metalink note 220970.1
Misc. Info:
Action: /var/opt/oracle/srvConfig.loc was renamed after 9i database and GSD stopped prior to installing CRS.
Why?: 10g CRS chose to use 9i's srvm.dbf rather than the file system I had created for the 10g CRS cluster registry.
Task at Hand:
Need to register 9.2.0.8 RAC database ofsg under 10gR2 CRS.
Issue:
As 9i RAC database owner oraofsg with the 9i RAC environment set, and 9i GSD down:
srvctl add database -d oraofsg -o /sv01/sw/oraofsg/ofsgdb/9.2.0
PRKR-1005 : adding of cluster database ofsg configuration failed, PROC-5: User does not have permission to perform a cluster registry operation on this key. Authentication error [User [oraofsg] does not match with initialized user] [0]
Question: Has anyone successfully registered a 9i RAC database under 10g CRS?
Thanks for your consideration.
Regards,
Jerry

Hi
CRS_HOME must be owned by a different user:group (preferably root) than $ORACLE_HOME (owned by oracle), for several reasons like patching.
Please note also that you will need an ASM dedicated home and also a AGENT_HOME that can be owned by oracle.
Hope this helps.

Crs installation problem in oracle 10g rac with NAS storage

Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
Mugunth

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Installing CRS

Similar Messages

Maybe you are looking for