Installing cs 6 on a iMac OS 10.7

I've just downloaded CS 6 put it doesn't show up in my applications folder even after I've opened the insdtsller. There is a download file with the Adobe CS6 Standard Icon. Should I just drag itinto the applications folder? Thanks.

Did you installed CS6 using Creative cloud or using the Disc or ESD?
You need to click on the setup.app file from the ESD/DVD and then try to install the application. In case you got it from Creative cloud, you need to run the adobe application manager and install Dw CS6.

Similar Messages

I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards

I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards

Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.

How do I install CS6 on my new imac without a disk drive?

I purchased cs6 on dvd from adobe under a year ago and now want to install it on my new imac.How do I install it on the imac without a disk drive?

Giddy,
You can go ahead and follow the link below to download the CS6 for you.
http://forums.adobe.com/message/4295655#4295655
-Mandhir

HT1899 Hi!!! i am planning to install window 7 at my imac ( OX mountain loin - version - 10.8.....). after buying windows cd what would be procedure to install the same and this is compitable to run normal programme of Microsoft or not... pls help me on

Hi
I am planning to install window 7 on my imac ( version - ox mountaion loin - 10.8.2, purchase this year in may 2012) but before installing the same pls let me know what i would required means - is there required any special software or hardware.... or is there any different cd for mac windows.....
Thanks,
Punit Garg

You require Windows 7.
Windows 7 is the same and will run the same as it would on a Windows computer. All programs that run on a windows computer will run on your Windows once installed. You will need anti virus software for your Windows partition. Microsoft Security Essentials is free and it works well.
Read the help files before installing http://www.apple.com/support/bootcamp/.

I just installed iLife on my new Imac version 10.8.2 and now I can't open my iPhoto app. It says that I Photo is damaged or incomplete. What do I do to restore my iPhoto and pictures!

I just installed iLife on my new iMac 10.8.2 version and now I can't open my iPhoto app. It says it is damaged or incomplete. What can I do to get it back along with all of my picutures? I was told by an Apple employee at my one to one training that it was OK to install iLife to get the iDVD that I wanted. Help!

I have installed iLife a few times and because of photostream, the version on the disc must be updated. Software update usually takes care of it. It sounds like you installed an old version over a new version. I've not tried that.
You have a late 2012 machine, if you open the Mac app store from the dock, you should be able to go to the purchased tab and download/install the right version of iphoto. Honestly, you should not have used that disc on this new of mac or at least only installed iDVD & iWeb but not garageband, iphoto, and iMovie.
If the Mac App Store shows iphoto as installed already, drag the app from your applications folder to the trash and reinstall it again from the Mac App Store. That is the version you need. You may find garageband and imovie have similar problems.
good luck.
PS. your photos are in your photo folder in your home folder. don't touch those, I'm talking about the app "iphoto" in the applications folder.

How can I install Mongolian keyboard on my imac

how can I install Mongolian keyboard on my imac

I have some you can try:
https://dl.dropboxusercontent.com/u/46870715/k/MongolianC.zip
You unzip and put the .keylayout files in /Library/Keyboard Layouts and then logout/login and then check their box in system preferences/language & text/input sources and then select them in the "flag" menu at the top right of the screen.

How can I install internet explorer on my iMac?

How can I install internet explorer on my iMac?

WZZZ wrote:
Nope didn't notice that. No idea what it was doing in the list of current discussions--I guess it was one of those old threads that wakes from the dead and reappears out of nowhere.
Yep. The wonderful, wacky world of Jive.

Have installed 10.10 on my iMac (mid 2007) 2.4 GHz 2Gb memory which has slowed to a crawl

have installed 10.10 on my iMac (mid 2007) 2.4 GHz me 2 GB which has slowed to a crawl

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I just installed Mountain Lion on my iMac that was previously running Snow Leopard. Bugt I found that some key applications no longer work, so I would like to go back to snow Leopard. I can't use time machine backups for this. what can I do?

I just installed Mountain Lion on my iMac. But In was dismayed to find that my Canon scanner software (Canoscan LIDE500F)no longer works. Nor do any of my MS offce applications. I tried to use time machine to reinstall Snow Leopard (my previous operating system), but unfortunately my time machine backups did not include system software. Also, the original system install disk that came with my iMac would not allow me to install Snow Leopard in place of Mountain Lion. I would appreciate it if somebody could tell me how to solve this problem.

The reason your Office doesn't work is because it is PowerPC code. If you will upgrade the 2004 Office to 2011 Office then that will work.
I don't understand how you managed to get your Time Machine backup to not backup the system.
Now if you still what to downgrade you will have to erase the disk and reinstall Snow Leopard. Most likely all of your application and then restore your data from Time Machine.
To me it sounds like it would be easier to upgrade your software and stay with Mountain Lion instead.
Allan

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router

I have read various threads on installing Win XP on my iMac

Hi All
I have read various threads on installing Win XP on my iMac, i have tried on 2 seperate ocations to install win XP Pro on the partition created by bootcamp but in each instance the install failed. I get to the part of the installation where you select the partition to install win xp and when i select that partition i get partition not recognised please click enter to go back and choose a different partition.
To get the install to accept the partition i need to reformat it, and after doing this when the computer reboots it says please choose any key to boot from cd but in doing so the install starts all over again, or if i don't press a key and let the installation continue as i would on a normal pc the computer just freezes and the installation fails.
The couple of times i have tried this i have ended up reinstalling my mac os again, i don't want to go through all this again so if anyone can point me in the right direction it would be much appreciated.
Cheers
Dave

Mr.Lobotomy wrote:
Does your Win XP CD have Service Pack 2 on it? You cannot install the original Windows XP or Service Pack 1. You must install Service Pack 2 (or later). See http://docs.info.apple.com/article.html?artnum=306580
If this is your issue, search these forums (all dates) for "Slipstreaming" to learn how to convert your CD plus a blank CD into a Win XP SP2 disk.
I tried slipstreaming following the instructions I found on this forum, with no luck. It didn't recognize it as any kind of Windows install disk.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

How do I install Photoshop Express on my iMac? (Can I install it on my iMac?)

I'm a writer working on a book, and I need Photoshop Express (if it's possible) to view the size/resolution of image files that I plan to use in the book.
I have a contractual deadline of this coming Monday, February 9, to get these photos to my editor in the high-resolution form that they specify.
Can I do this with Photoshop Express?
Also, can I install Photoshop Express on my iMac (running OS X version 10.6.8....yeah, I know it's an old OS, but I don't want to do an OS upgrade while I have a pook project in the works.)
Please let me know ASAP...I'd like to get these images sorted out and ready to send to my editors no later than this coming Friday, February 6.
Thanks in advance for your help!

Photoshop Express is an iOS app, not an OSX program. And no, you can't create print-ready imagery with it. You are looking completely in the wrong place. Find someone to take care of your images or send the raw files to your publisher so they can have their own pre-press team working on them.
Mylenium

Installing cs 6 on a iMac OS 10.7

Similar Messages

Maybe you are looking for