Installing CS4 on Mountain Lion, CD is not recognised by the maschine
I recently got a hard drive on my macbook pro replaced with loosing all applications, so I have to reinstall them. Previously there were no problems installing premium CS4 suit, which I purchased and installed in 2009. But this time, even though application 1 cd runs perfectly, and at the point when it requires to insert cd2, and when I do so, my computer sees it as blank cd, and the installation quits. What is wrong with it now? As I've been told by your representatives that it is competable with Mac OS X 10.8. Tried to install 5 times, restarted computer, checked the cd is not damaged and remained unused for 3 years.
thank you.
download the trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
if you see an access denied page, you didn't follow all the directions for downloading.
use your serial to install/activate.
you should deactivate (help>deactivate) the copy on your dying machine.
Similar Messages
-
Hi all , i tried to install os x mountain lion i could not it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks
Hello, might be good luck on your part!
Anyway...
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk. -
After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore
After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxxHi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy -
Installing CS4 on Mountain Lion?
Dear peeps - could somebody help out please?
I bought a new Macbook Pro with OS 10.8.1 Mountain Lion (as the old one was beginning to die a death, being 6 years old). I have a perfectly legal copy of CS4 Design Premium, which I need to install on the new machine. However, as there is no optical drive and the software is on a disc - how do I go about installing it with minimum hassle/no extra expense...?
On other forums I am recommended to download a trial version, then enter the real product code - however it won't let me do this as the installer detects the download does not come from the App Store.
Any ideas, anyone...?download the trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
if you see an access denied page, you didn't follow all the directions for downloading.
use your serial to install/activate.
you should deactivate (help>deactivate) the copy on your dying machine. -
How to install CS4 on Mountain Lion successfully?
Whenever you insert Disc 1 of Adobe CS4 and run the setup, you will see a gray screen pop up "preparing for setup". Typically after this screen, you will get to the usual selection screen of what components to be installed as well as prompt for serial number. However, in Mountain Lion and some Lion machines, CS4 will be stuck at the gray screen "preparing for setup" and be frozen at the last 7/8 of the bar. I do notice a disk partition being mounted and disappear, but then again, that was in Lion. Mountain Lion just refuse to load the selection screen for installation.
Sorry, I know this is an old thread, but I ran into the same problem, and my search brought me here. I finally figured out the issue. If you've tried installing and had the AIR error, and you've downloaded the latest version of AIR like you're instructed to do, then you try running the install again, it will treat it like a custom installation. You have to scroll down through the programs on the right hand side of the window and select the programs you want to install. Deselect Adobe AIR, Acrobat.com, and Adobe Media Player (they can be downloaded separately later), but select everything else, then click "Install". It should get you past the "Preparing for setup" screen - http://helpx.adobe.com/creative-suite/kb/installation-creative-suite-4-or.html
-
Reminders made in the mountain lion app are not appearing in the ios app
I installed mountain lion and the reminders app seems to be misbehaving.
I have icloud enabled on my mac and my iphone.
When I create a reminder on my iphone it shows up on my mac in about 30 seconds but when I make one on my mac it never shows up on my iphone. In addition, I made a new list on my mac and when it also didn't show up on my iphone I made a list on my iphone to test and the list created on my mac dissappeared without a trace when the list created on the iphone came through.
Is anyone else having issues with items syncing in the mountain lion reminders app?Yep. Looks like the function is down. And only for music. Movies, tv etc. work fine. Hadn't noticed until now since I never use genre as a filter.
-
Any ideas? I'm on a MacBook Air.
I have the same problem as m.proudfoot. Defintiely a bug with the Dock. In addition, when I minimized applications, despite having the preference to minimize windows into the application icon, they would also start minimizing as windows to the right of the dock. I was able to fix it temporarily by restarting the dock. Go to the Terminal Application (in Utilities) and type the following: killall -KILL Dock
That will restart the dock and for me it worked, where all of a sudden three running applications appeared and the CMD + TAB starting working again. Give it a try to see if it helps at least until there is a 10.8.1.
As for what causes it, that I haven't figured out yet, but I have had it occur on 2 different machines, a MacMini and MacBook, both with Mountain Lion. So sure seems like a bug.
Kevin -
Mountain lion content code not recognised
the attachment content code is not opening by using the password that u have sent to me. what should i do ?
I have the same problem. In fact they sent me two different passwords for the code file and neither work!
I have written to the Apple e-mail address provided and have not yet had a response.... -
Trying to install Mountain Lion, getting Disk not formatted properly
I am currently running osx 10.6.8, trying to install Mountain Lion and when I am selecting the drive to install too I get:
"This disk is not formatted as Mac OS Extended (Journaled)..."
This is my master HD so i cant really just reformat it? Im not great with macs so step-by-step would help.
Model Name: MacBook Pro
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i7
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0Open Disk Utility, select your Macintosh HD volume. In the status area at the bottom check that it is partitioned using GUID. Now click on the Journal icon in the toolbar above. This should fix it for you without having to reformat the drive.
Since you have the downloaded Mountain Lion installer I suggest you make a copy of it in your Downloads folder. Then do the following:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
the copy into your Downloads folder. Now you can click on the Install button. You
must do this because the installer deletes itself automatically when it finishes
installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion. -
I purchased my Macbook Pro in November 2011 and just installed mountain lion but do not have the power nap option.. anyone know why?
It is for the MacBook with built in flash storage.
http://www.apple.com/osx/whats-new/features.html#powernap
4. Power Nap requires a Mac notebook with built-in flash storage. May require a firmware update. -
Mountain Lion installer will not let me choose my Lion Partition as an install location
Mountain Lion installer will not let me choose my Lion Partition as an install location.
Any ideas why?Again, why will the Mountain Lion installer not allow me to select my Lion partition as the location for the install?
Good question. That's the main way it's supposed to be installed. You shouldn't even need to choose a partition. You purchase Mountain Lion through the App Store, it downloads to the Applications folder and automatically begins the installation on the drive where Lion or Snow Leopard resides as soon as the download is complete. -
When attempting to install OS X Mountain Lion I get the following error message "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." Any idea what the issue might be?
Mama --
Which Mac??????
iMac, MacBook Pro, Mini,, what?
Go up to the Apple icon on the upper left hand corner of your screen (menu bar).
Click that, and then "More Info". and then "More Info" again.
What does it say? Here's what mine says: -
could not install mountain lion We could not complete your purchase. OS X Mountain Lion is not compatible with this computer. I'm running the latest update 10.6.8. Any help to overcome this issue will be great
rarramirez wrote:
Any help to overcome this issue will be great
There is nothing to overcome, your mac is too old to run Mountain Lion. For an iMac it must be a (Mid 2007 or newer) http://www.apple.com/osx/specs/ -
After installing Mountain Lion, contacts will not sync
After installing Mountain Lion, contacts will not sync to iphone 3G
I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.
-
Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3
Go to > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/
Maybe you are looking for
-
Problem in printing crystal reports
Hi, i am displaying Crystal report, which is have is having 4 pages of data. while printing the data, after printing the first page , 2nd page is also start printing in 1st page page Regards, MVSwamy
-
Move purchased song from one library to another on same computer
I have 2 iTunes libraries on the same computer. I purchased a song from itunes and downloaded it to the wrong library by mistake. How do I move/copy/transfer this one song to the correct library, please. Both libraries are set for sharing but I ca
-
Is there any way to get a list of the apps installed on my phone through MyVerizon?
I am going to be upgrading in a few days, and I want to obtain a list of all the apps I have installed, so that I can cull out the ones I don't use much or at all. Is there a list on the MyVerizon website anywhere of what's installed on my phone??
-
The new update for iphoto has locked my app up and I now can't access iphoto. I've restarted and turned off and rebooted, but the software is still locked up with the error message that it is updating.
-
Using a static HashMap with a value already put in.
I tried the following: private static Map<String, IngredientType> KNOWN_INGREDIENT_TYPES = new HashMap<String, IngredientType>().put(IngredientType.getNEUTRAL_BASIC_NAME(), IngredientType.getNEUTRAL_TYPE());The compiler complains: "Type mismatch: can