Installing CUCIMOC CM 6.1.5
Hi Networkers,
I have this scenario, my customer already have a CUCM 6.1.5 working with Active Directory and OCS sync with all the elements, but actually I am stucked with the next step, already read all the documentation about it, but it is all about to new implementation I need a little push to continue, I never did a CUCIMOC implementation, so to go on I think I need to;
I am lost with this document;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/7_1/english/integrat/guide/config_clients.html
Thanks for any advice.
CUCIMOC stores its configuration in registry.
You'll have to populate the registry with a BAT file or ADM file. You may find those files in the CUCIMOC - Admin package (downloadable from CCO).
It's recommended to use the BAT file.
For more details regarding CUCIMOC, see http://www.lulu.com/content/5552336
Thanks!
Michael
http://htluo.blogspot.com
Similar Messages
-
Installing CuciMOC with a Batch File
I'm trying to get this thing to install with a batch file and Altiris. What switches did you guys use on the msi? What switches did you use on the exe? Which would you use the msi or the exe? Why?
Thanks in advance! I'm a batch file n00b.We lost our steam on this project because some other things came up. I'll post what
we had before we stopped working on it:
echo Install Dot Net 3.5 SP1
"Z:\Software\Microsoft\Dot NET\3.5\dotnetfx35_SP1_Full.exe" /q /c: "install /l /qb"
echo Killing MS Outlook and OCS Communicator
taskkill /IM "iexplore.exe" /F
taskkill /IM "outlook.exe" /F
taskkill /IM "communicator.exe" /F
echo Copying CuciMoc
xcopy "Z:\Software\Cisco\CuciMoc\cucimoc-Install-ffr.7-1-3a\CiscoUCIntegrationTMforMicrosoftOfficeCommunicatorK9.msi" "C:\IT\CuciMOC\" /I
echo Installing CuciMoc
"C:\IT\CuciMOC\CiscoUCIntegrationTMforMicrosoftOfficeCommunicatorK9.msi" /qn
echo CuciMOC is installed
****From what the other guy said it doesn't install correct in our environment. The install goes through then when you log in as admin it says that ocs must be closed, then you close it and it says it needs to be running and fails. Haven't looked into it any further yet. Maybe the above will help for you. -
Hi, I have a question about Click-to-call and CUCIMOC. Can they be installed together? We tried to do that, but it didnt work. When we tried install CUCIMOC and then Click-to-call, it said, that we need to uninstall CUCIMOC first. When we tried it by other way, it was the same. Is there some conflict with these applications?
Second question is, does have CUCIMOC some Click-to-call equivalent feature?
Thanks for any answers.
John
Our versions.
Click to call 8.1
CUCIMOC 8.0CUCI-Moc/Lync 8.x includes the click-to-call client functionality, as outlined in the data sheet.
Streamline processes by placing calls from the application you are currently using. You can click to call, or video call, directly from Mozilla Firefox; Microsoft Internet Explorer; Microsoft Office Excel, PowerPoint, and Word; and Microsoft Outlook and SharePoint applications.*• Microsoft Outlook 2007 SP1• Microsoft Outlook 2003• Microsoft Word 2007• Microsoft Word 2003• Microsoft Excel 2007• Microsoft Excel 2003• Microsoft PowerPoint 2003• Microsoft Internet Explorer 6.0 or later• Mozilla Firefox 3.2 or later
Note: Click to Call is supported on 32 bit Office Applications and not at this time on 64 bit Office Applications.
Please remember to rate helpful responses and identify helpful or correct answers. -
CUCiMOC and CUCiLync desktop sharing and conferencing
Hi Guys,
Can someone please advise when we install CUCiMOC or CUCiLync does it also disable the "desktop sharing" feature of MOC/Lync client? I have read few blogs on this and getting conflicting answers
Also, my understanding is CUCiMOC or CUCiLync can still use CUCM (DSP's in ISR) for adhoc audio conferencing, however for Web, Video and scheduled audio conferencing we need to implement Meeting Place and Webex...is that correct?
Thanks
AamirHi Aamir,
desktop sharing should still be available, It has nothing to do with it. You should disable any audio or video conferencing solution on Lync in order to have the better experience with CUCILync. This does not mean it will disable desktop sharing
Regards
Ronak patel -
CUCIMOC 8.0 Error "Start converstation capability is not available"
I've got a user that I'm trying to setup CUCIMOC 8.0 for. We're using the latest CUCIMOC client release, Office Communicator 2008 R2 at the latest CU level, and Call Manager 7.1. I've got everything setup for the user identically to how other (working) CUCIMOC users on our CM are setup. The user is able to login to the CUCIMOC client, and is able to use his phone to make calls, but when he tries to use the softphone he gets the error message:
"Failed to start converstation. Start conversation capability is not available."
Digging further, when looking at this device in CUCM Admin, the softphone device shows up as Active and Trusted, but doesn't show a registration.
Looking further, in the Core client log from his machine, I get the error below (indicating the softphone isn't able to register):
Any ideas?
2011-04-25 12:41:46,292 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Incoming --- SystemServiceEndpoint - <heartbeat xmlns="http://service.system.v2.soap.uc.cisco.com"><clientId>CUCIMOC-1</clientId></heartbeat>
2011-04-25 12:41:46,293 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Outgoing --- SystemServiceEndpoint - <ns2:heartbeatResponse xmlns:ns2="http://service.system.v2.soap.uc.cisco.com" xmlns:ns3="http://system.v2.soap.uc.cisco.com/types"><ns2:ok>true</ns2:ok></ns2:heartbeatResponse>
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_read_socket : socket error=92011-04-25 12:42:02,911 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-SIP_REG_STATE: 1/51, sip_reg_sm_process_event: SIP_REG_STATE_REGISTERING <- E_SIP_REG_TMR_RETRY2011-04-25 12:42:02,911 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_detach_socket : Invalid socket2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmsub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiLineRegState(119)] - Registration status for line:1 is:false
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.lineNotify(777)] - Registration state not changed
2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (60) is invalid2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (61) is invalid2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmsub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.912 [12bc] SIPCC-UI_API: 1/0, ui_set_sip_registration_state: 02011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiRegAllFailed(138)] - Registration failed for all lines:
2011-04-25 12:42:03,011 ERROR [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.regAllFailed(850)] - All registrations failed.
2011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.updateRegStateAllLines(1073)] - regState = falseHi,
Try the following-
1) Uninstall local antivirus/firewall
2) disable all network adapters except the one being used
3) update hardware driver such as video and audio
4) uninstall cucimoc and re-install using local admin permission
Also try the latest version cuci-lync 8.5.2 (it is compatible with OCS 2007 R2 and up)
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp64340
http://www.cisco.com/cisco/software/release.html?mdfid=283665631&softwareid=283732952&release=8.5%282%29&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rm
Thanks -
Where can I find the CUCIMOC.adm template?
I have down loaded the CUCIMOC software and I am trying to follow the documentation to cover configuration. The documentation mentions a group policy template CUCIMOC.adm to help wth the settings. I can't seem to find it on the pc I have installed the CUCIMOC app on or on Cisco.com. Anybody know where I can get a copy?
Thanks
GPTI believe it is in the ZIP package under:
Unified Communications Client
Cisco UC Intergration for MOC
If I remember its buried in some package that does not make sense....(where it should be!) -
Hi,
After working for a month, my CUCIMOC client stopped working, The message i got is: "Cisco UC has stopped working" the details are:
Description:Stopped working
Problem signature:Problem Event Name: APPCRASH
Application Name: cucimoc.exe
Application Version: 8.5.201.19358
Application Timestamp: 4e494944
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.18229
Fault Module Timestamp: 51fb1116
Exception Code: e053534f
Exception Offset: 0000c41f
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
I have de-install and installed the client but it stil fails to start. Any ideas?Hi,
Sounds like an issue with the OS, did you install any patch recently?
Can you verify your system is compliant to the CUCIMOC 8.5 requirements below:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp342549
Is CUCIMOC working fine on another PC?
Can you try this workaround?
Application Might Not Start in Some Circumstances Due to Office Communicator Automation API Error
After you install Cisco UC Integration for Microsoft Lync, then start Microsoft Lync or Microsoft Office Communicator, your Windows operating system might display a message that says "Cisco.Uc.Clients.Moc.UCClient has stopped working." Cisco UC Integration for Microsoft Lync does not start.
This issue can occur when Cisco UC Integration for Microsoft Lync cannot connect to the Office Communicator Automation API. For example, this issue can occur in the following circumstances:
•On Windows XP, if you have Microsoft Lync, Microsoft Office Communicator, or Windows Live Messenger installed, and you upgrade from SP2 to SP3.
•If you have Microsoft Lync, Microsoft Office Communicator, or Windows Live Messenger installed, and you uninstall Windows Live Messenger.
To fix this issue, perform a repair of Microsoft Lync or Microsoft Office Communicator, as shown in the following steps. Alternatively, reinstall Microsoft Lync or Microsoft Office Communicator.
Procedure
Step 1 Open the add or remove programs tool in the Control Panel.
Step 2 Select Microsoft Lync or Microsoft Office Communicator in the tool.
Step 3 Select Click here for support information.
Step 4 Select Repair.
(Procedure taken from the Release Notes above)
Regards,
Tere.
If you find this post helpful, please rate! -
Can I use CUCIMOC 8.5 for Lync integration on OCS 2007 R2 instead of Lync?
We do not have a Lync server in our environment.
Is it recommended to do so?Um, yes it has been tested. Look at the release notes. It clearly says in the Client Software Requirements section that OCS 2007 R2 client/server are supported.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp256226
Software Requirements
Table 6 Software Requirements for Cisco UC Integration for Microsoft Lync
Item
Description
Operating system
Windows 7 Professional, Enterprise, or Ultimate, 32-bit or 64-bit
Windows Vista SP2 Business, Enterprise, or Ultimate, with DirectX 10, 32-bit or 64-bit
Windows XP SP3 with DirectX 9.0c, 32-bit only
Note Ensure that the latest display drivers are installed on your computer so that your display functions correctly with DirectX.
Microsoft Visual C++ 2005 Redistributable Package
Version 8.0.59193 or later
Note The redistributable package must be installed before you install Cisco UC Integration for Microsoft Lync, if you are using MSI to install.
Microsoft Lync or Microsoft Office Communicator
Microsoft Lync 2010
Microsoft Office Communicator 2007 R2
Applications that can use click-to-call features
Microsoft Outlook 20101
Microsoft Outlook 2007 SP11
Microsoft Outlook 20031
Microsoft Word 20101
Microsoft Word 20071
Microsoft Word 20031
Microsoft Excel 20101
Microsoft Excel 20071
Microsoft Excel 20031
Microsoft PowerPoint 20101
Microsoft PowerPoint 20071
Microsoft PowerPoint 20031
Microsoft SharePoint 20101 2
Microsoft SharePoint 20071 2
Microsoft SharePoint 20031 2
Microsoft Internet Explorer 6.0 or later1
Mozilla Firefox 3.2 or later
Software framework
Microsoft .NET 3.5 SP1 -
Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support -
How many times can you install Reflow with one account?
I installed Reflow at my job's computer because its free on Preview mode, but then I stupidly realized that Adobe might not permit multiple installs of the same program from the same account in another computer? I want to install Reflow at home as well using the same account. Will Adobe block me from doing this?
There should be no problem installing Reflow on both computers using the same Adobe Creative Cloud account.
Vic -
How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software -
HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!
I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
nullI'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null -
I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MCMichael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)? -
8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks. It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level 1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: 2014-08-29T05:10:07.602701000Z
Wake Time: 2014-08-29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}. I need a tech to help me get my web server up?So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
1 Set VPN NIC Settings
2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {
"Failed to connect to the target server!"
exit(5)
foreach ($card in $netAdapt) {
IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
$myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
"Success"
} else {
"Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
"The icon is hidden.. Setting it now"
$setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
} else {
"The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server IPs Subnet GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
Write-Host "Looking at $server"
$colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
foreach($objItem in $colItems) {
Write-Host ""
$myip = $objItem.IPAddress -join " "
$mySubnet = $objItem.IPSubnet
$myGW = $objItem.DefaultIPGateway
$temp = $objItem.index
$myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select netconnectionid
$myid = $myid -replace "@{netconnectionid=",""
$myid = $myid -Replace "}",""
echo "$server $myip $mySubnet $myGW $myid"
echo "$server $myip $mySubnet $myGW $myid" | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap -
This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?
Maybe you are looking for
-
I have an original @mac.com email address and also use my address at [email protected] I have no issues logging into iCloud account from my MacBook or accessing my account from my iPhone. But anytime I try to log into the iCloud website from my work
-
How to create a customer program for "PPMOD"feature(pe03)?
Hi, I want to create customer program for "PPMOD"feature(tcode:pe03),who can tell me the steps? (ECC6.0) thanks a lot? Olivia Yang
-
Why does my iphone 5 say line: giffgaff underneath network in about menu?
What does it mean by "line- giffgaff"?
-
CIF 168 error .. Data in apo is correct
Hi All, I am getting the CIF 168 error:- Status of order in R/3 on General tab of Co03 :- Total Quantity: 946 Delivered Quantity: 685 In rrp3 view in APO: there is the production order with receipt quantity 261 Error Details:- =============
-
How do I unsync photos when I have uninstalled itunes?
I synched some albums onto my ipad with iTunes from PC (Checked "sync photos" and provided paths). Later, due to computer crashes on PC, uninstalled iTunes. How do I get rid of the photos?