Installing Current patch set after SAP installation

Hi,
We are installing SAP ECC6.0 on Solaris x64. We installed the Oracle RDBMS software and missed installing the Oracle Current patch set. We have proceeded with the SAP installation. Can we install the Patches after the SAP installation or do i need to uninstall SAP and do t all over again. Please help asap as i need to complete it..
Regards
Dee

Hello Dee,
> Can we install the Patches after the SAP installation or do i need to uninstall SAP and do t all over again
Of course you can install the patchset after the SAP installation. The current patchset is the 10.2.0.4.
After applying the current patchset - please install also the "on-top" patches - check sapnote #1137346 for this. Also check sapnote #830576 for setting the corresponding database parameters after the patchset installation.
Regards
Stefan

Similar Messages

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Tried to install Illustrator CC and after 98% installation it said "failed" to install. Why?

Tried to install Illustrator CC and after 98% installation it said "failed" to install. Why?

The message I got was, 'Download error. Press retry to try again or contact customer support.(49).'

Error while installing oracle patch set 10.2.0.4

Hi Gurus,
I am installed oracle 10G successfully but while installing oracle patch set 10.2.0.4. it is given the following error.
OUI.exe has encountered a problem and needs to close.
We are sorry for the convenience.
i am installing ECC6.0 on window xp SP3 platform.
Please give me solution ASAP.
Regards
Hemant Gade
Basis Consultant

Hi,
I have solved this issue my self.
It was purely windows registry error.
thanks for your help.
Regards
Hemant

11g patch set after the s/w n DB installation

Hi,
I have installed Oracle 11g to the following location: ORACLE_HOME=/oracle/app/product/11.2.0/dbhome_1. Installed version is 11.2.0.2.
I wanted to apply PATCHSET 11.2.0.3 before installing the database. but forgot..
Two questions please:
- Now what should be the procedure to do this, and secondly, I should have installed database to the directory 11.2.0.3 instead of 11.2.0 (as above).
- I want db in the directory as specified and then I want to apply patchset to upgrade it to 11.2.0.3.
Thanks
Regards

910385 wrote:
Hi,
I have installed Oracle 11g to the following location: ORACLE_HOME=/oracle/app/product/11.2.0/dbhome_1. Installed version is 11.2.0.2.
I wanted to apply PATCHSET 11.2.0.3 before installing the database. but forgot..
Two questions please:
- Now what should be the procedure to do this, and secondly, I should have installed database to the directory 11.2.0.3 instead of 11.2.0 (as above).There are two phases to any patch/patchset. First is patching the software itself, in the desginated ORACLE_HOME. Second is running some scripts (like catalog.sql, catproc.sql) against any databases that are running from the patched home. Obviously, if you have not created any databases on the patched home, you have nothing to run those scripts against. But if you later move a database to that patched home, you will need to run those scripts.
And be aware that if you used dbca to create a database and select anything other than 'custom' database, the database will be created from a 'seed' database and will probably have to have the patch/upgrade scripts applied to it. If you choose 'custom' database, it will be created from a series of scripts based on a CREATE DATABASE command, and thus will be created at the current patch level.
- I want db in the directory as specified and then I want to apply patchset to upgrade it to 11.2.0.3.Typically the oracle home is only named to the first three decimals, and patchsets are installed into the same home. There is really no need to name your home down to the patchset level, and doing so just creates more work. Been there, done that.
>
Thanks
Regards

How to install SAPGUI Patches(Silently) while SAP application is running.

Hello All,
We have SAPGUI 7.10 installed in our environment. We would like to update the sapgui patch from 10 to 12. However we would like this to be installed to all the PCs silently while sap application is open.
We want this to happen becasue most of the users will be accessing sap and we want the patch to be push silently without user interations. Please let us know your inputs on this.
Thanks
Sarin

Hello Subash,
Thanks for the reply. I have gone throught the blog. here is a quote from the blog you sent meu2026
"When we made tests with the installtion package we noticed that there is a problem when SAPGui/SAPLogon is still running. Is there a possibility to kill any GUI/Logon Process on start of the installation?"
It appears that it is saying there are issues when the SAP GUI is running. I believe they are saying that the package should kill the SAP GUI prior to installing the patch. Am I reading it correctly?
If that is the case we could get in trouble if we just kill someone SAP connection. Please advise...

Steps after SAP Installation

Hi Gurus,
Do you have a document which would list down the steps to be performed after SAP is installed before we start migrating the legacy data.
thanks

Hi Gurus,
Do you have a document which would list down the steps to be performed after SAP is installed before we start migrating the legacy data.
thanks

Re-Installing Logic Pro 9 after clean installation of OS.(?)

Hi, I had a question I just could not find the answer to on search engines, so I made a discussion thread myself.
I currently have Logic Pro 9 installed on a Mountain Lion OSX.
Is it possible for me to somehow re-install/transport Logic Pro 9 without losing the application?
(Assuming that there still isn't a way to download the application from the app store due to Logic Pro X)
I'm afraid to reformat my computer and upgrade to an SSD because I'm assuming that there is no way that I can get Logic 9 back if I lose the current installation. Other than keeping the current partitioned drive or using CCC, is there a way to re-install Logic 9 after a clean (reformatting) installation of a new partitioned drive? (A way to get it back from the app store, or keeping an installation file from the package contents of Logic Pro 9 if there is one.)
I would really appreciate some help! Thanks.

Yes...yes... and correct....
The app itself is no longer sold so you can't "look" at it (or purchase it) but once you sign in to the App Store using the same Apple ID you used to purchase Logic Pro 9 in the first place... on your new Mac you will see it available for you to download, under the purchased tab where it will say "Install"
Again, bear in mine this only works if you purchased Logic Pro 9 via the App Store originally. It does not work for those that originally bought the DVD version of Logic Studio/Pro 9..
I just had to do this myself on one of my testbed Macs which I wiped and installed 10.6.8 for testing purposes on behalf of a client of mine..... and Logic Pro 9.1.8 was there,under the purchased tab in the Mac App Store app... exactly as expected... ready for me to install.

Installing new patch cluster after os is hardened with Jass 4.2

hi, i have a Solaris 10 system that's hardened with Jass 4.2. what is the correct way/best practice to apply the latest recommended patch cluster?
will applying the latest recommended patch cluster 'un harden' the system?
thanks.

Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O

Not applied Patch 5117016 after 10.2.0.2 patch set.

Hi ,
database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
please advise me.
thanks in advance,
Hussain.

Hi,
I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
When I run OUI to see what has been installed I see only Interim Patch #5557962.
I didn't create any database between the installations.
So I can't apply OpachSet README.html advice .
Uninstall PathSet :
C:\> sqlplus /NOLOG
SQL> CONNECT SYS/SYS_Password AS SYSDBA
SQL> SHUTDOWN IMMEDIATE
SQL> EXIT
Should I try to Create a Database and after that apply OpachSet README.html advice
C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
Date & Time : Fri Aug 31 10:56:03 CEST 2007
Oracle Home : C:\oracle\product\10.2.0\db_1
OPatch Ver. : 10.2.0.3.0
Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
/regards

PL/SQL don't work after install Oracle 9204 patch set

I'm using Oracle 9.2.0.1.
some pl/sql don't work after i install database patch set 3 (9.2.0.4).
code--------------------------------
BEGIN
dbms_aqadm.stop_queue(
queue_name => 'WB_RT_SERVICE_QUEUE');
exception
when others
then
null;
END;
error message is: ora-03113 end-of-files on communication channel.
please help. thank you !!

Can you please tell me the soluation of this problem as I am also facing the similar problem ?
Thanks in advacne ?
Regards
Satpal

10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium installation failed

hi everyone
after i installed the oracle10g 10.2.0.1,and tried to install the patch set (10.2.0.4)
Prerequisite check failed!
My OS platform is HP-UX B.11.23 IA64
the error info as follow :
Checking the Components installed in Oracle Home
Actual Result: error
Check complete. The overall result of this check is: Not executed <<<<
Recommendation:
=======================================================================
Checking for Oracle Home incompatibilities ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckCompatibility' from ruleset 'CompatibilityChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczCompatibilityChecks.checkProductCompatibility' has thrown an unhandled exception [value for param now is null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Choose an existing Oracle Database 10g Oracle Home for installing this software.
=======================================================================
Any advise will be much appriciated!
Do need your helps!
Thanks&Regards
Peter

Hello,
The same problem is documented on Oracle metalink:
OUI 10.2 Prerequisite Check Fails With OUI-15038 And "[value for param now is null]" [ID 602059.1]:
Cause
Some kernel tunables (parameters) have been changed but the new values will not be activated until the next server reboot
Solution
Reboot the server so that the kernel tunable (parameter) changes are activated before installing the Oracle software
Workaround
The errors/warnings can be ignored and the Oracle installation can be completed successfully, but it is best to schedule a reboot of the server soon so that the pending kernel parameter changes are activated.
References
BUG:7150277 - OUI 10.2 PREREQ CHECKS FAIL WITH OUI-15038 AND "[VALUE FOR PARAM NOW IS NULL]"

9.2.0.3 patch set installation fails on Solaris 8

i've installed Oracle9iR2 (64-bit) client on a Solaris 8 system and i'm now having problems installing the 9.2.0.3 patch set. during the installation process i get the following error message from OUI:
Error in invoking target install of makefile
$ORACLE_HOME/network/lib/ins_net_client.mk
i checked the installation log and then $ORACLE_HOME/install/make.log. make.log reports that the failing command is:
/usr/ccs/bin/make -f ins_net_client.mk install ORACLE_HOME=/opt/oracle9i/u01/app/oracle/product/9.2.0
this command fails when trying to link trcroute. the link command seems to have incorrect paths as it seems to expect to find crt?.o files from $ORACLE_HOME/lib/WS6U1 while they are located in $ORACLE_HOME/lib/WS6U2/lib/v9. i modified $ORACLE_HOME/network/lib/env_network.mk (CCVER, COMPOBJ) so that crt?.o can be found.
after this change the same link command fails with this message:
ld: fatal: file $ORACLE_HOME/network/lib/s0nur.o:
wrong ELF class: ELFCLASS32
ld: fatal: File processing errors. No output written to trcroute
*** Error code 1
make: Fatal error: Command failed for target `trcroute'
i checked the object files in network/lib and they all seem to be ELF 32-bit.
does someone know what's causing these problems with the installation and how to fix it?
best regards,
aspa

that's what i started to suspect as well. it's quite likely that the patch is for 32-bit installations. i'll try it with the 64-bit patch. thanks.

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Installing patch set 9.0.4.2

I'm trying to install the patch set 9.0.4.2 over our single-box installation of 9.0.4.1. I launch the installer with:
/mnt/cdrom/runInstaller
But I get this error:
There are no patches that need to be applied from the patchset Oracle Collaboration Suite patch set 9.0.4.2.
Do I have to do something special when it's a single-box installation ? I didn't saw any special instructions in the documentation.
Thanks.

I don't have access to Metalink since we are using the evaluation kit. My "/etc/oraInst.loc" file have this content:
inventory_loc=/home/oracle/oraInventory
inst_group=oinstall
/home/oracle/oraInventory9 is valid and does contain my installation's inventory.

Installing Current patch set after SAP installation

Similar Messages

Maybe you are looking for