Installing custom folders and files using install wizard 8.5.1

How do I get 8.5.1 Install Wizard do Install the following:
1. Install the DAQmx tasks created on my development system to my target system.
a. How do I attach the exported config file to the project?
2. Take the foreground.txt files I have for program control in C:\Hipot\Files\ on my development system, and copy the files and folders to the target system.
a. How do I attach these folders and files to the project?
When the installer is done, I want the DAQmx config information, and my .txt files in the path C:\Hipot\Files\, on the target system.
Thanks,
Ron Kocol

Hi Ron,
Step 3 of this Developer Zone article may be useful for you:
Creating an NI-DAQmx Application Installer with LabVIEW
You can do what you are trying to do by adding additional files to the install as described there. Thanks!
Stephen Meserve
National Instruments

Similar Messages

How to move folders and files using UJFS

Hi guys,
I need to move from one environment to another the folders and files in the structure, cause the backup / restore (UJBR) doesn't move that part, now I need to know how to do it in the transaction UJFS . ( I'm using SAP BPC 7.5 NW Patch 8)
Thanks for your help.
Cheers,
Rodrigo

Thanks for your answer,
In this case, I'm going to move the files and folders from one server to another, so it's not the scenario you mentioned.
Cheers,
Rodrigo

Compressing folders,sub-folders and files using java

Hello Friends,
There's a small query if somebody could answer.
I have to zip the contents of a folder which could have any hiearchy of folders and files.
In short i want to do something what WinZip does but at runtime.
Of how much help would be java.util.zip. In what format does this compression work and how similar is it to WinZip compression.
Any help out there.
Thanks in advance :)
Regards
Shajee

Hello Friends,
There's a small query if somebody could answer.
I have to zip the contents of a folder which could
have any hiearchy of folders and files.
In short i want to do something what WinZip does but
at runtime.
Of how much help would be java.util.zip. A goodly amount.
In what
format does this compression work and how similar is
it to WinZip compression.
Same.

I have iphoto 8.1.2 .If i buy and instal iphoto 9.5.1 does that mean that i will loose all my folders and files?

i have iphoto 8.1.2 .If i buy and instal iphoto 9.5.1 does that mean that i will loose all my folders and files?

LarryHN wrote:
Unfortunately the facts contradict your opinions - the facts are that Apple has stated that iPhoto can continue to be used and that you can seamlessly migrate form iPhoto to photos - you are telling people to do and not do things based on your personal opinions
Uh, perhaps you should learn to read what was actually written.
What did I tell anyone to do/not do?
What was my "opinion"?
I wrote, "However, note that iPhoto is going away, soon to be replaced soon by the new Photos app".
the facts are that Apple has stated that iPhoto can continue to be used and that you can seamlessly migrate form iPhoto to photos
I never suggested, hinted or stated otherwise...
Are you stating that Apple is going to continue on with iPhoto & it is NOT going to be replaced by the Photos app?
and how does all this help the OP?

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone !

I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone so I am very terrible to input my IDs and Passwords with my hands on FireFox Home when I log into Facebook, Twitter etc... Is it issue or something like that? If you have some solutions to make it clear, can you tell me how to syncronize memorized IDs and Passwords for the webs. Thank you.

You can look in Tools > Options > Sync
Menu differences: [http://kb.mozillazine.org/Menu_differences Windows: Tools > Options - Mac: Firefox > Preferences - Linux: Edit > Preferences]
See also:
* [[What is Firefox Sync]]
* [[How to sync Firefox settings between computers]]
* [[How to sync Firefox between my desktop and mobile]]

How get SharePoint Library Folders and Files directory structure in to my custom web site.

Hi,
Actually my requirement is, I would like to pass site name and document library name as a parameter and get a folders and files from the document library and form the directory structure by using Treeview control in my web site.
How should i get? Using Web service / object model?
Web service would return the dataset as a result so from that how could i form the directory structure using Treeview control.
I will select specified files and folders then i ll update sharepoint document library columns for corresponding selected files.
Can anyone help over this, that would be great appreciate.
Thanks in Advance.
Poomani Sankaran

Hello,
Here is the code to iterate through sites and lists:
//iterate through sites and lists
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(webUrl)) {
using (SPWeb oWebsite = site.OpenWeb())
SPListCollection collList = oWebsite.Lists;
foreach (SPList oList in collList)
{//your code goes here }
Then use RecursiveAll to get all files and folders.
http://www.codeproject.com/Articles/116138/Programatically-Copy-and-Check-In-a-Full-Directory
http://sharepoint.stackexchange.com/questions/48959/get-all-documents-from-a-sharepoint-document-library
Here is the full code:
http://antoniolanaro.blogspot.in/2011/04/show-document-library-hierarchy-in-tree.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

IOS7 installed on itunes but it did not install on phone and cant use phone

IOS7 installed on itunes but it did not install on phone and cant use phone any help?

yes i put the wifi adress in and the phone asks to restore from icloud or itunes, i click itunes and it shows that it is connected to itunes. my itunes says it is restored but my phone is stuck on the connected to itunes screen and will not let me into my phone

Formatted HD, but have backup of all the folders and files of Firefox. How can I restore everything, including plugins, bookmarks and saved settings?

I have formatted my computer's HD because of a problem with Windows 7, the thing is that Windows 7 didn't start, so I couldn't backup my Firefox settings, bookmarks, plugins, themes, personas and etc. the right way.
I also don't have a Firefox Sync account.
What I do have are all the folders and files of Firefox, because I just created a new partition and installed Windows 7 again, what I'm having trouble is finding a way (if there's any) to restore everything from my previous installation to the new one.
I have searched for days on both Google and on te Firefox forum with no success, the only questions I found are about restoring a profile, but what I'm trying to do is the same thing that the Firefox add-on " FEBE " does, which is restoring everything to the previous configuration.
Here's alink to the add-on: https://addons.mozilla.org/pt-br/firefox/addon/febe/
I have tried copying, pasting and overwritting from the " .default " folder to my new installation of Firefox (yes, Firefox was closed), but when I opened it again, nothing was restored.
I every single folder and file Firefox ever created on my computer, this includes the installation folder (at Program Files), the profile (.default at AppData) folder, the Mozilla folder (ProgramData) and the Mozilla Firefox folder (also at AppData).
I also had the FEBE add-on installed, but like stated before, unfortunately I couldn't start Windows 7, forcing me to create a new partition to install a new copy of the OS.
Thanks in advance.
PS. Sorry if I made the text too long and/or if I mentioned the same things twice, just trying to be thorough.

Hi Sdarts,
I apologize for the delay in replying to your question, and I am sorry to hear that you are having issues restoring your Firefox user data.
Please see the following article, which explains how to restore your Firefox user data using a previously backed up Profiles folder, which seems to apply to your situation:
* [https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles Backup and Restore information from Firefox Profiles]
Please let us know if this solves your problem or if you have any questions.
Thanks!!
- Ralph

Finder not able to view folders and files on EHD after updating to OS X 10.9.4

I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
directory: "/Volumes/HITACHI"
attributes: avbstclinmedz
modified: 07/10/2014 23:26:44
Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

Unable to rename folders and files on SharePoint mapped drive.

I just installed a fresh copy of Windows 7 and have mapped a drive to my SharePoint "Shared Documents" folder. I am able to open, save, and delete files and folders. However, I am unable to rename files and folders. No matter how long of
short of a name I use I get the following error:
"The file name you specified is not valid or too long. Specify a different file name."
I've mapped the "S" drive to http://hostname.domain.com/Shared Documents/
I am a SharePoint Admin, and have confirmed that if I do not have this problem if I log into SharePoint with IE. I have also confirmed that others are not experiencing this issue. Also, this issue did not exist on my previous installation of Windows
7. Therefore I assume this is a config issue.
Also, in "My Computer" it shows the mapped SharePoint drive as a "FAT" filesystem.

Did some more testing. From my mapped drive, I can create new folders and files, and delete them. I created a folder in Windows Explorer, when I tried to give a name it gave me the above error and saved the folder as "New Folder". No matter when
I try, I cannot rename this folder unless I log into the SharePoint interface.
Next, I tried this from the command line. I moved to my S drive, and did a "mkdir test" and was able to create a folder named test. Next I tried to "rename test testing" and received the following error:
The filename, directory name, or volume label syntax is incorrect.
The full path is S:\test. If I do a "mkdir testing" I am able to create the folder. If I try to rename the folder in Explorer, it gives me the "file name not valid or too long". I'm obviously well under the 260 character limit, so there
has to be something wrong with the fiel name, or drive mapping.
Also, when I "dir" the S drive it tells me the drive has no label. "Volume in drive S has no label."
I'm having the same issue with files. I can create a file, modify it, delete it, but can't rename it.

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Accessing Windows Drive its folders and files through KM

Hi All,
I have portal server installed in my laptop with KM, i would like to access windows C drive with all folders and files in my local machine what are the configurations i have to do.
One more thing
In real time scenario can we use CM repository, my requiremtn is to store documents of diffrent king which repository we can use which data base what configurations we have to set, basically what is the difference between internal and external repositories.
regards,
Murali

Hi Murali,
Internal repositories are those which come created in the KM like etc, documents and many more.
External repositories are folders on diff locations (either on server or at other system) which are mapped to KM as repositories.
Now. about ur requirement : You can try mapping the path c:\ as a folder in KM by making a File Repository manager.
For storing different kind of documents you can make different folders in Windows and map them as repositories by configuring File Rep managers for them
See this[ link|http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm] to know about configuring a file repository manager.
I hope it helps.
Regards,
Sumit

Can't hide Hidden folders and files.

Hi All,
This past weekend I transferred my OS and apps to a newly installed SSD drive.
During the process I had to move some files around in order to get The OS and Apps on the SSD.
I used a technique that utilizes the Terminal and the chflags command.
My issue is now I can not hide the files and folders that are usually hidden.
I can't remember the exact method I used to unhide hidden folders and files. I can't even find a reference to it in my web browsers history.
I have searched on the web for solutions along these lines:
defaults write com.apple.finder AppleShowAllFiles -boolean FALSE ; killall Finder
chflags hidden
sudo chflags hidden
But none of these approaches have worked.
I have downloaded Onyx, TinkerTool and Show Hide Invisible Files.
I have used them as best I understand to hide the normally hidden files and folders, but nothing has worked.
Any Command Line gurus out there have any suggestions?
Many Thanks in Advance!
Tem

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.finder.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
☞ Does the dialog show "You can read and write" in the Sharing & Permissions section?
☞ In the General section, is the box labeled Locked checked?
☞ What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Preparing for Mountain Lion - what folders and files should be saved?

Hi gang,
Although some of you make think this is obvious, it really is not. In preparation for Mountain Lion, I curious what folders and files (other than the obvious) should I move off to another drive? I'm going to do a clean install this time around. I'll probably do an upgrade first to understand any gotcha's when I upgrade my wife's MBP later, then do a clean install.
I'm going to move the documents, my Aperture and iPhoto libraries, but I'm unsure about the iTunes folder and my movies and such. Most of my software has come from the App Store, so I don't need to worry aobut those, and the few other programs I have the software for (iWork, iLife, but we'll probably need new versions of those.
I just preparing a list to make sure that I get everthing.
Thanks, Mark

When doing a clean install OS upgrade I like to swap out the time machine drive, storing/retiring the old time machine as a backup of the old system while keeping it's Time Machine history.
So personally what I do is:
#1 clone my boot drive to an external (at this point I have two backups Time Machine + a clone)
#2 wipe the boot drive and install new OS on it (at this point I still have two copies of my data TM + clone)
#3 verifiy the old time machine is accessible from the new boot drive (sometimes due to ownership/permissions/filevault this is a problem so check even if migrating from clone)
#4 selectively migrate files from clone or TM to new install
#5 Start a new time machine of the new OS drive (sometimes I'll wipe the clone at this point and use it, prefering to keep the old TM as a archived backup)
One note, I've burned myself at least once forgetting that I'd excluded some parts of my old drive from Time Machine drive (usually Podcasts, Movies), so pay attention to that before relying on it.

Installing custom folders and files using install wizard 8.5.1

Similar Messages

Maybe you are looking for