Installing Database 11.2.0.1.0 on Solaris 9 SPARC machine.
Hi,
I am installing db using ade copydb and than running startme , I am getting this error continously.
ld.so.1: /ade_autofs/nfsdo_release_unix/RDBMS/11.2.0.1.0/SOLARIS.SPARC64/RELEASE/sqlplus/bin/sqlplus: fatal: libm.so.2: open failed: No such file or directory Killed
Please help me to get the DB 11.2.0.1 installed on Solaris 9 SPARC.
Thanks,
Edited by: 906748 on 09-Jan-2012 04:21
Hi;
You can use below version for 11gR2 which is already by Srini
The following operating system versions (or later) are required for Oracle Database 11g Release 2 (11.2):
Oracle Solaris 10 U6 (5.10-2008.10)
Starting with Oracle Database 11g Release 2 (11.2.0.3), Oracle Database is also supported on the following operating system versions (or later):
Oracle Solaris 11 11/11 SPARC
Oracle Solaris 11 11/11 X86
See also:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios
Similar Messages
-
Installing RealTek ethernet card in solaris 7 sparc machine
I inserted RealTek ethernet card in my Solaris-7 Sparc machine. But to work it properly ,need to install driver for the card. I searched a lot but i did't get the driver to download . I have read from some sites that the driver for solaris 7 sparc is not avaliable.How can i solve this problem.?
Anybody please help me to solve the problem.You can try a NIC driver from RealTek, directly.
http://www.realtek.com.tw/downloads/
... but for a SPARC system? That may be problematic.
Does OBP see the device? Use show-devs at the OK prompt.
If it isn't seen at OBP's elementary hardware level, the OS will never use it.
If it is recognized at OBP, then try the manufacturer's drivers.
Return to the forum and let the rest of us know what happens.. -
Install package for Firefox 30.0 on Sun Solaris 10 SPARC?
Looking for the latest Sun Solaris 10 SPARC package for Firefox 30. It appears it either has not been posted yet or development of Firefox on Sun Solaris has halted.
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest/contrib/
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest/contrib-localized/
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/contrib/
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/contrib-localized/
Package name should be similar to "firefox-30.0.en-US.solaris-10-fcs-sparc-pkg.bz2".
Thank you!Mozilla does not tar packages for all linux platforms, but some third party repositories do. I did find: [http://unixpackages.com/packages/mozilla]
[http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/linux-i686/en-US/] AND [http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/linux-x86_64/en-US/]
How to build Firefox [https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Build_Instructions/Linux_Prerequisites] -
Hi all,
Pre-installation:
I install the oracle with user "oracle" which belongs to "dba" group.
The environment variables are
PATH=/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,Ultra-80/sbin:/opt/sun/bin:/opt/SUNWexplo/bin
LD_LIBRARY_PATH=/usr/openwin/lib
OPENWINHOME=/usr/openwin
ORACLE_OWNER=oracle
Also, i created /oracle folder for the installation of oracle
Synonym:
While installing oracle, I was encountered the error in invoking target ntcontab.o of makefile /oracle/OraHome92/network/lib/ins_net_client.mk while installing Oracle 9.2.0.1.0 in Solaris 9 unix machine.
The content of /oracle/OraHome92/install/make.log is as follows
/usr/ccs/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/OraHome92
(if [ "assemble" = "compile" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
(if [ "assemble" = "assemble" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.s ;\
/usr/ccs/bin/as -xarch=v9 -P -o ntcontab.o ntcontab.s ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
Error in finding run directory. Using default /opt/SUNWspro/binerror: Unable to
find current directory
*** Error code 1
make: Fatal error: Command failed for target `ntcontab.o'
Could anyone give me a suggestion how to fix the problem.
It's urgent
Many thanks,
KelvinIf someone having above problem....
umount partitions where installing oracle and then check perrmisions to mount point and mount back.
This work for me.
Thanks -
Error while installing Database 10g on Linux Enterprise 5
Hi All,
When I tried to install Database 10g this error apears
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-05_12-55-24PM. Please wait ...bash-3.2$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-05_12-55-24PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
--------------------------------------------------------------This has been documented on various places.
Install the libXp package, that is the package which contains libXp.so.6, which is missing (see your error message)
Is this x86 or x86_64?
(in both cases you need to install the x86 version (.i386.rpm)) -
ERROR WHILE INSTALLING DATABASE INSTANCE
Hi All,
I am getting an error while installing database instance in 4.7EE with Oracle 8i.The error is
running sapstart.exe name=AS9 nr=00 SAPDIAHOST=astrum -wait
SAPSTART finished successfully on astrum_AS9_00, but Dispatcher is not connected to MessageServer.
sapparam(1c): No Profile used.
PLEASE HELP ME....hi pavan,
i believe that oracle 8i are no longer supported by SAP.
By default, SAP R/3 4.7 EE should come with Oracle 9i.
Check your installer again.
ardhian
http://sapbasis.wordpress.com -
Error installing Database instance on MSCS
error installing Database instance on MSCS
plateform: windows2003/oracle10g
product: SAP ERP 2005
Two node MSCS based cluster.
- Installed OS and patched it.
- Configured network adapters
- Configured Shared storage device.
- Installed Cluster server.(Tested by moving resources to other node successfully)
- installed oracle10g
- Patched db
- Installed Oracle failsafe.
- I have installed ASCS instance on first node using shared disk successfully.
- Clustered the first node successfully
- Created the oracle failsafe group
- While installing the Database instance. (nothing was displayed in Dbhost field, i have manually entered virtual database host) . set all other wizard parameters ... installation stopped on step 5 e.i. "Create and Load Database" with an error message as follows.
ERROR 2007-05-02 17:30:49
CJS-00095 Error return code.<.br>DIAGNOSIS: Return code 1 of executable E:\oracle\PRD\102/bin/lsnrctl indicates an error.<.br>SOLUTION: See log file lsnrctl.log for details.
ERROR 2007-05-02 17:30:49
CJS-00095 Error return code.<.br>DIAGNOSIS: Return code 1 of executable E:\oracle\PRD\102/bin/lsnrctl indicates an error.<.br>SOLUTION: See log file lsnrctl.log for details.
ERROR 2007-05-02 17:30:49
FCO-00011 The step StartListener with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .
INFO 2007-05-02 17:32:01
An error occured and the user decide to stop.\n Current step "|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener".
<b>the logfile is very big ... but let me paste the important part only ...</b>
INFO 2007-05-02 17:30:24
Execute step setPermissions of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_Unpack|ind|ind|ind|ind|7|0.
INFO 2007-05-02 17:30:25
Execute step copyScripts of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_Unpack|ind|ind|ind|ind|7|0.
INFO[E] 2007-05-02 17:30:25
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:26
Execute step PrepareOraCreateTablespace of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0.
INFO[E] 2007-05-02 17:30:26
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:27
Execute step setDbenvEnvironment of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbCommon|ind|ind|ind|ind|0|0.
INFO[E] 2007-05-02 17:30:27
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:28
Execute step copyDbShellScripts of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbCommon|ind|ind|ind|ind|0|0.
INFO 2007-05-02 17:30:29
Execute step checkOraClientPreconditions of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0.
INFO[E] 2007-05-02 17:30:29
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:30
Execute step createOcl10Links of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0.
INFO 2007-05-02 17:30:31
Execute step createDbclientLst of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0.
INFO[E] 2007-05-02 17:30:32
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:34
Execute step setPermissions of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0.
INFO 2007-05-02 17:30:35
Execute step setDbenvEnvironment of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0.
INFO[E] 2007-05-02 17:30:35
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:36
Execute step doCleanOldNetworkFiles of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0.
INFO[E] 2007-05-02 17:30:36
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:37
Execute step doNetworkConfigurationServer of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0.
INFO[E] 2007-05-02 17:30:37
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:38
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DB\lsnrctl.log.
INFO 2007-05-02 17:30:38
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DB.
INFO 2007-05-02 17:30:38
Output of E:\oracle\PRD\102\bin\lsnrctl stop LISTENER is written to the logfile lsnrctl.log.
WARNING 2007-05-02 17:30:40
Execution of the command "E:\oracle\PRD\102\bin\lsnrctl stop LISTENER" finished with return code 1. Output:
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-MAY-2007 17:30:38
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
INFO 2007-05-02 17:30:40
Creating file E:\oracle\PRD\102\NETWORK\ADMIN\listener.ora.
INFO 2007-05-02 17:30:40
Creating file E:\oracle\PRD\102\NETWORK\ADMIN\tnsnames.ora.
INFO 2007-05-02 17:30:40
Copied file 'E:/oracle/PRD/102/NETWORK/ADMIN/sqlnet.ora' to 'E:/oracle/PRD/102/NETWORK/ADMIN/sqlnet.1.ora'.
INFO 2007-05-02 17:30:40
Removing file E:\oracle\PRD\102\NETWORK\ADMIN\sqlnet.ora.
INFO 2007-05-02 17:30:40
Creating file E:\oracle\PRD\102\NETWORK\ADMIN\sqlnet.ora.
INFO 2007-05-02 17:30:41
Execute step doNetworkConfigurationClient of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0.
INFO[E] 2007-05-02 17:30:41
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:41
Creating directory
sapgrp\sapmnt\PRD\SYS\profile\oracle.
INFO 2007-05-02 17:30:41
Creating file
sapgrp\sapmnt\PRD\SYS\profile\oracle\tnsnames.ora.
INFO 2007-05-02 17:30:42
Creating file
sapgrp\sapmnt\PRD\SYS\profile\oracle\sqlnet.ora.
INFO 2007-05-02 17:30:43
Execute step StartListener of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0.
INFO[E] 2007-05-02 17:30:43
FSL-02077 File system export (share) saploc does not exist.
INFO 2007-05-02 17:30:43
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DB\lsnrctl.log.
INFO 2007-05-02 17:30:43
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DB.
INFO 2007-05-02 17:30:43
Output of E:\oracle\PRD\102\bin\lsnrctl stop LISTENER is written to the logfile lsnrctl.log.
WARNING 2007-05-02 17:30:44
Execution of the command "E:\oracle\PRD\102\bin\lsnrctl stop LISTENER" finished with return code 1. Output:
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-MAY-2007 17:30:43
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=PRD.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=PRD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=oracleprd)(PORT=1527))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
INFO 2007-05-02 17:30:44
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DB\lsnrctl.log.
INFO 2007-05-02 17:30:44
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DB.
INFO 2007-05-02 17:30:44
Output of E:\oracle\PRD\102\bin\lsnrctl start LISTENER is written to the logfile lsnrctl.log.
WARNING 2007-05-02 17:30:49
Execution of the command "E:\oracle\PRD\102\bin\lsnrctl start LISTENER" finished with return code 1. Output:
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-MAY-2007 17:30:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to open service <OraclePRD102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.2.0 - Production
System parameter file is E:\oracle\PRD\102\network\admin\listener.ora
Log messages written to E:\oracle\PRD\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\PRD.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\PRDipc)))
Error listening on: (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=oracleprd)(PORT=1527))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown error
Listener failed to start. See the error message(s) above...
ERROR 2007-05-02 17:30:49
CJS-00095 Error return code.<.br>DIAGNOSIS: Return code 1 of executable E:\oracle\PRD\102/bin/lsnrctl indicates an error.<.br>SOLUTION: See log file lsnrctl.log for details.
ERROR 2007-05-02 17:30:49
CJS-00095 Error return code.<.br>DIAGNOSIS: Return code 1 of executable E:\oracle\PRD\102/bin/lsnrctl indicates an error.<.br>SOLUTION: See log file lsnrctl.log for details.
ERROR 2007-05-02 17:30:49
FCO-00011 The step StartListener with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .
INFO 2007-05-02 17:32:01
An error occured and the user decide to stop.\n Current step "|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener".
I have tried to start tnslistener manually but as soon as it get started it get stops.
please help !
Message was edited by:
Rizwan JavedStarting tnslsnr: please wait...
Failed to open service <OraclePRD102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.2.0 - Production
System parameter file is E:\oracle\PRD\102\network\admin\listener.ora
Log messages written to E:\oracle\PRD\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\PRD.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\PRDipc)))
Error listening on: (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=oracleprd)(PORT=1527))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown error
Listener failed to start. See the error message(s) above...
this is what it shows -
Install database development mode to production mode
Hai everybody,
now i am using oracle 11g 11.2.0.0 database with default options and default parameters.OS is RHEL linux 5.5 Machine is intel dual core 3.2 with 4 Gb Ram.memory_target is 1568M
sga_max_size is 1568M.Company plan to install Database in IBM server with Quard core processor , 32 GB Ram and RAID 5 storage.what things should i increase for the new installation(kernel parameters, db parameters, sga etc..) based on the server requirement. i am new to database please help me
Thanks and regards
junior dbaMy recommendation would be to remove the MEMORY_TARGET parameter and stick with the tried and tested SGA_TARGET and PGA_AGGREGATE_TARGET parameters. If this is the only database running on the server and you have 32GB RAM, I would bump up the total of the SGA and PGA to around 28GB, leaving some for the OS. Depending on what kind of DB it is and what load you have, will depend on how you share the SGA and PGA memory.
If you are happy with performance and all your queries then leave the parameters as they are. Take a look at an AWR report for your database over a representative period of time when there is peak load and check out how it looks. If it's not good, you might want to tweak some of the DB parameters, but if it's OK apart from one or two queries then you would need to tune those individually.
Hai,
i have only 6 months experience in oracle database so i have known only very little things, we have no experienced dba here.Ours is a small software firm, here doing online application development using java and its testing and testers some times recommend some times database performance too low, not always some times only, i don't know what's the reason. i just queried "select seq#, event, username, osuser, wait_time, seconds_in_wait, state, schemaname, process, blocking_session, status from v$session where type='USER'; " i didn't get nothing
my another question is some times they say db is slow can i figure out the problem using any sql query.company plan to test deply and testing our online application next week (application server tomcat and db oracle 11g 11.2.0.0).i read some posts if increase SGA set memory_target and memory_max_target parameters with around 40% of Physical RAM for one instance.please give new infomation
Thanks -
Error installing Database Instance in WAS 6.40
Dear All
I try to install Database Instance using R3 load mechanism (via image) but got this error;
WARNING 2006-12-05 02:01:30
The step FillNodesTable with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYST
EM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseServer|ind|i
nd|db6|ind|ind|0|AssignNodegroupsToNodes|ind|ind|db6|ind|ind|0|FillNodesTable wa
s executed with status ERROR.
Can anyone help me on this matter. I stuck with the installation.
Regards,Just rerun back the installation.
-
IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODEIt is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards. -
Installation stuck during phase Install Database Software
I am installing DB2 version 9.1 FP5 on Windows 2003 R2 SP2.
During phase Install database software I get the following error
Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
When i check the db2setup.log i get the following:
MSI (s) (84:68) [13:51:05:196]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (84:68) [13:51:05:196]: Running product '{F23620AE-7E17-4863-898E-7F191B39022D}' with elevated privileges: Product is assigned.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vomus'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding INSTALL_MODE property. Its value is 'NEW'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_LAUNCHER_RC_FILE property. Its value is 'C:\DOCUME1\ACONTR1\LOCALS~1\Temp\12\DB21.tmp'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_LOG_FILE_PATH property. Its value is 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\db2setup.log'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding LAUNCHPAD_LOCATION property. Its value is 'D:\Basis\51034846_3_DB2_LUW_91_FP5_Windows_64bit\DB2_LUW_RDBMS_91_FP5SAP_Windows\WINDOWS_AMD64\ESE\image'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Modifying DB2_COPY_NAME property. Its current value is '___NotSet___'. Its new value: 'SAPDB2TWJ'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_COPY_NAME_OVERRIDE property. Its value is 'SAPDB2TWJ'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding INSTPATH property. Its value is 'D:\db2\db2twj\db2_software'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding RSP_FILE_PATH property. Its value is 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\DB6\CENTRAL\AS\win_ese.rsp'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding SILENT_MODE property. Its value is 'ON'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_TRACE_FILE_PATH property. Its value is 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\db2setup.trc'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_INSTALL_LANG property. Its value is 'EN'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding MSINEWINSTANCE property. Its value is '1'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Modifying TRANSFORMS property. Its current value is '|:inst1.mst;D:\Basis\5103481\DB2_LU1\WINDOW1\ESE\image\db2\Windows\ESE\1033.MST'. Its new value: ':inst1.mst;D:\Basis\5103481\DB2_LU1\WINDOW1\ESE\image\db2\Windows\ESE\1033.MST'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding SETUPEXEDIR property. Its value is 'D:\Basis\5103481\DB2_LU1\WINDOW~1 CURRENTDIRECTORY='.
MSI (s) (84:68) [13:51:05:196]: Note: 1: 1708
MSI (s) (84:68) [13:51:05:196]: Note: 1: 2729
MSI (s) (84:68) [13:51:05:196]: Note: 1: 2729
MSI (s) (84:68) [13:51:05:196]: Product: DB2 Enterprise Server Edition -- Installation failed.
MSI (s) (84:68) [13:51:05:196]: Attempting to delete file C:\WINDOWS\Installer\ced05bae.mst
MSI (s) (84:68) [13:51:05:196]: MainEngineThread is returning 1639
Info 1639.Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
D:\BASIS\5103481\DB2_LU1\WINDOW~1\ESE\IMAGE\DB2\WINDOWS"
MSI (c) (E0:74) [13:51:05:305]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:74) [13:51:05:305]: MainEngineThread is returning 1639
=== Verbose logging stopped: 10/12/2008 13:51:05 ===
Please advise.It seems that the path from where the installation has been started is too long. So you have to shorthen the following path were the RDBMS-software was copied to.
Current path (might be much longer, because of ~ placeholders):
D:\Basis\5103481\DB2_LU1\WINDOW~1\ESE\image\setup.exe
Please copy the RDBMS-DVD to an other shorter path, so that the path to setup.exe is e.g.
D:\short_path\WINDOWS_I386\ESE\image\setup.exe
The problem here is not the lentgh of this singel path. The problem is that in several steps this path will be multiplied in length until the limit is reached. Then the installation will fail.
Please try again with the shorter path. -
How to install database 10g and forms&reports developer 10g?
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideGul wrote:
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideThis link will help you http://tahiti.oracle.com/ -
How to install database in run time
hi all
i want to ask if i can install database as run time only and in this case how i can logon the sql ?,i want to install it as run tim such as developer 6 run tim
is this possible?
thanxfirst thank you for helping me
and i will try to explain what i want to do in more details
i'm using oracle database9i with developer 6i and i want to deliver an application was mad by this tools i know that i should setup the database and forms runtim only in at the customer computer the application -at the first- will work at only on one computer ,this computer will run as the client\server
my question is
if i can setup the database as run time only or i must setup complete at the customer computer?
i tried to do that by choosing this option when installing database
1-Oracle9i Client 9.2.0.1.0
2-Run tim
but after making this i can't connect with database
i hope that if i can explain what i want to do -
How to install database firewall 5.0
I download Oracle Database Firewall 5.0.0 Media Pack v1 for Linux x86 from edelivery, and I readed the document "Installation Guide Release 5.0 E18693-03".
Then I installed oracle enterprise linux 5.4 x86, But I can't find the "Welcome to Enterprise Linux screen" when I login to linux.(page 18 on document)
how to install database firewall 5.0?
Thanks.Hi
The DB Firewall acts as a bridge when using in inline mode. You should not have to change anything on the Client nor on the DB Server. The Client, DB Firewall and DB Server are in the same IP Network but not "physically" connected. This mean's the DB Server is connected with the DB Firewall on one side and the Client with the DB Server on the other side.
I've configured a test environment with VMWare. To have to separated network I created a second host only network with the same IP range. DB Server and on Network Interface of the DBFW is in vmnet2 while Client, DBFirewall Console and second Network Interface is in vmnet1. When the DB Firewall or Bridge is switched off the client can not "see" the DB Server anymore. I've documented my Test Environment at http://www.oradba.ch/2011/04/oracle-database-firewall-test-environment/
I saw a test configuration from Oracle based on Virtualbox. There they used the internal network for the DB Server / DBFW NIC1 and the host only network for the client, DBFW Console and DBFW NIC2.
1. Why I am not able to see all tabs in DBFW console?
=> no idea.
2. How to integrate Oracle Database with this Firewall setting?
=> no change on the DB nor on the Client. Setup an enforcement Point to integrate it in the DBFirewal.
3. Will user access DBFW or DBFW-MS or Database?
=> The do not have to access DBFW unless they want to see the console
4. What will be the change in the TNS entries on client side?
=> no change
Cheers
Stefan -
Problem in Installing Database Instance in R3 system
Hi,
i am installing SAP r/3 installation.
I have installed Central Instance Successfully
When i am installing DAtabase instance. I am getting the following Error
Please help me how to proceed
ERROR 2006-11-25 20:47:33
FRF-00007 Unable to open RFC connection.Hi Balaji,
Stop the installtion then log into SAP with the User SAP* with password - "06071992" then change the DDIC password to whatever you want.
Once done restart the install and continue to the stage where you need to install the DDIC password, enter the changed password and the installation will continue without errors.
Please let me knwo if this helps
Regards,
Phani
Maybe you are looking for
-
How do I combine two icloud accounts
Hello. I have five apple products. I also have two icloud accounts. Can I merge the two and if so how?
-
Capturing Motion Video and a SNAP with one CWIMAQ Device
Hello, I am using Measurement Studio 6.0 controls and I am trying to accomplish a Continous Acquisition and a periodic interval SNAP Capture with only one CWIMAQ control. I have A CWIMAQ control attached to a 1 CWIMAQViewer this starts to acquire whe
-
Hi Gurus, I would like to learn about XML in Oracle database 10g. Where can I get examples and supporting documents? Thanks and Regards, Forms.
-
I installed Google Earth and now I am unable to upload any photos to any websites (i.e. Facebook, Ebay, etc.). I updated all plugins according to your support page and still cannot upload any photos. Please help with this matter. Thank you for your t
-
Ipod photo not synching with Nikon Coolpix 880
Hi all, Despite all the posts on the subject, synch with camera connector still does not work. Context: IPOD photo 30G with Photo Import option on and driver 1,2; Nikon coolpix 880 listed as supported on IPhoto site. Symptoms: Get message "No card in