Installing DBMS_XML_SCHEMA_ANNOTATE package

Hi
In solving some issues with recursive xml we installed 11.2.0.2.0.
The solution that had been provided included use of dbms_xmlschema_annotate. This didn't seem to be part of the install so we downloaded the utilities from the XMLDB homepage (xdbpm) and installed it.
The resulting install contained dbms_annotate_xmlschema_11100 rather than dbms_xmlschema_annotate, and the contained functions and procedures did not match the names given in the solution, i.e.:
DBMS_XMLSCHEMA_ANNOTATE.setDefaultTable(V_XML_SCHEMA,'mzML','MZML_TABLE');
DBMS_XMLSCHEMA_ANNOTATE.disableDefaultTableCreation(V_XML_SCHEMA);
Instead it has similar options
addDefaultTable(P_XML_SCHEMA in out XMLType, P_GLOBAL_ELEMENT VARCHAR2, tableName VARCHAR2);
procedure disableDefaultTables(P_XML_SCHEMA in out XMLType);
Is this the correct package? If not where should I look for the correct one? If it is the correct package are these the appropriate equivalents?
Thanks in advance for any help
Conor

Not sure what is in this current package, most of the time Mark is a bit ahead regarding versions, but stuff like "dbms_annotate_xmlschema_11100" is the correct package which is accessable, should be, via a public SYNONYM called DBMS_XMLSCHEMA_ANNOTATE.
You should use the "xdbutilities.zip" stuff though not the older "xdbpm", which has also some nice goodies, but hasn't the current versions for DBMS_XMLSCHEMA_ANNOTATE

Similar Messages

  • Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

    Getting below mentioned error while installing a package  in the windows 2012 server remotely through psexec command
    Error 1718. Windows Installer Service could not be accessed.
    The same msi is getting installed local in through when we are doing through manually
    Please help on the same

    Hi Rahulan,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    Just addition, please refer to following threads and check if can help you.
    The Windows Installer Service could not be accessed.
    error 1719 windows installer service could not be accessed ....
    Hope this helps.
    Best regards,
    Justin Gu

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested.  The message I receive is: "The installer has encountered an unexpected error installing this package.  This may indicate a problem"

    I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested.  The message I receive is: "The installer has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2324."

    Hi hongkongpom,
    Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah.  My problem was resolved after that.  Will list the chat history below in hopes that it may help you as well.
    Good luck!
    Samia  
    Chat Transcript
    Friday, October 4, 2013 05:55 AM
    Duration: 81 minutes 28 seconds
    Rebekah:
    Welcome to AppleCare chat support. Please give me a moment to look over your information.
    Rebekah:
    Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
    Rebekah:
    Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
    SAMIA:
    Sure, it's 8L8395UY2C5
    SAMIA:
    My problem is with iTunes.
    Rebekah:
    Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
    SAMIA:
    I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
    SAMIA:
    I don't have a problem with iPod.
    SAMIA:
    Just iTunes
    Rebekah:
    No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
    Rebekah:
    Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
    SAMIA:
    This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
    Rebekah:
    Thanks for that info!
    SAMIA:
    Pleasure!
    Rebekah:
    What version of Windows (XP, Vista, 7) do you have?
    SAMIA:
    Windows 7
    SAMIA:
    Windows 7 Home Premium
    Rebekah:
    Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
    SAMIA:
    Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
    SAMIA:
    - AppleMobileDeviceSupport64
    SAMIA:
    - Bonjour64
    SAMIA:
    iTunes64
    SAMIA:
    SetupAdmin
    SAMIA:
    I selected Repair in all of them instead of Remove and all worked but iTunes64
    SAMIA:
    That's when I received the message that I sent you earlier.
    SAMIA:
    By the way, this is the fir st time something like this occured. I never had problems with installation before.
    Rebekah:
    I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Rebekah:
    First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
    SAMIA:
    Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
    SAMIA:
    I closed all applications
    SAMIA:
    Also, my iTunes doesn't open anymore after the new failed installation.
    Rebekah:
    The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
    Rebekah:
    So no worries! We have the right article!
    Rebekah:
    On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
    SAMIA:
    I thought so after doing a little exploration.
    SAMIA:
    done
    Rebekah:
    Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
    Rebekah:
    After the uninstallation is complete, we don't want to restart your computer if you're prompted.
    SAMIA:
    Done
    Rebekah:
    Then if you see other iTunes entries on the list, we'll want to remove them the same way.
    Rebekah:
    Then we will remove all instances of Apple Software Update the same way you removed iTunes.
    SAMIA:
    Okay, but do I have to remoce iCloud as well?
    SAMIA:
    Rebekah, I received the same error message again when uninstalling
    Rebekah:
    We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
    Rebekah:
    How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
    SAMIA:
    I am unable to uninstall iTunes either
    SAMIA:
    Stopped completely
    SAMIA:
    I treied clicking Repair
    Rebekah:
    Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
    SAMIA:
    I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
    Rebekah:
    This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
    SAMIA:
    Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
    Rebekah:
    Awesome! I'm glad that worked!
    Rebekah:
    To be sure I am on the same page, what was the last component we uninstalled?
    SAMIA:
    iTunes
    SAMIA:
    Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
    Rebekah:
    That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
    SAMIA:
    Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
    Rebekah:
    The second one is Apple Mobile Device Support.
    Rebekah:
    The Application Support will be the last component we uninstall.
    SAMIA:
    Thanks! I'm on it.
    SAMIA:
    Done! ll 3 are gone, well 4 with iTunes. Now what?
    Rebekah:
    Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
    SAMIA:
    There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
    Rebekah:
    Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
    SAMIA:
    No
    SAMIA:
    Since I removed it
    Rebekah:
    Oh, perfect! If it was removed, we should be set!
    Rebekah:
    We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
    Rebekah:
    That should allow you to download iTunes!
    SAMIA:
    Shall I downloaad the latest vesion?
    Rebekah:
    You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
    SAMIA:
    Okay, thanks Rebekah!
    Rebekah:
    You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
    SAMIA:
    Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
    Rebekah:
    You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
    Rebekah:
    I hope you have a lovely day!
    Rebekah:
    It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
    SAMIA:
    Will do, thanks.

  • How to Install UTL_SMTP Package in Oracle 8.1.5

    Hi
    We are trying to use UTL_SMTO package to send mail.
    Will this package runs in Oracle 8.1.5? Any restriction on using this package?
    How to install this package? Where the SQL for this package is residing.
    If anyone can answer for this, we will be thankfull to you.
    regards
    Santhosh

    Hi,
    Run d:/oracle/ora81/rdbms/admin/utlsmtp.sql as SYS user. It create the package UTL_SMTP.
    Hope this helps.
    rukmini

  • Error Installing with Package from CCP

    Hi,
    Apologies if there's a CCP board; I didn't see it in the menu.
    I used Creative Cloud Packager to make a package of apps for Mac.
    Installing the package using Apple Remote Desktop returns ".. could not be installed.  Error message: "Running package scripts...""
    When I run it locally on any machine (10.6 or 10.9), it responds with this error:
    The installation progress slows to a crawl about 3/4 of the way through "Running package scripts..." then after a few minutes returns "The installer encountered an error that caused the installation to fail.  Contact the software manufacturer for assistance."
    Nothing relevant seems to appear in the console log.
    Anyone have any ideas?
    Thanks,
    Jeff

    Im having EXACTLY the same problem
    After installing a new package ONCE, if I then try to re-install the same package again it fails half way through the install on second install atempts on a new Mac
    its a nightmare because I REALLY need a stable package to deploy accross many macs in our business,
    ADOBE PLEASE sort this out this is a MAJOR problem for your customers

  • Installing DBMS_JAVA package

    Hi All,
    in my database Oracle 9.2.0.6 on solaris DBMS_JAVA package is missing. As i want to install the package so i ran initjvm.sql script and spooled the log. I am pasting the spool file for your reference as it's giving an error and terminates the sqlplus session.
    ****************** LOG FILE***********************************
    SQL> @initjvm.sql
    DOC>#######################################################################
    DOC>#######################################################################
    DOC> If the following :test_for_1335603 := 'x' statement causes
    DOC> a PLS-00553 error, and thereby terminates the sqlplus connection,
    DOC> simply restart the script in a new sqlplus session.
    DOC> This error can occur if the script is run in the same session where
    DOC> the database was started. To avoid this problem, always start a new
    DOC> session to run scripts after starting the database.
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>*/
    PL/SQL procedure successfully completed.
    PL/SQL procedure successfully completed.
    PL/SQL procedure successfully completed.
    create or replace package initjvmaux is
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01653: unable to extend table SYS.IDL_UB2$ by 128 in tablespace SYSTEM
    Warning: Package Body created with compilation errors.
    call initjvmaux.drp('drop table java$rmjvm$aux')
    ERROR at line 1:
    ORA-06576: not a valid function or procedure name
    call initjvmaux.drp('drop table java$rmjvm$aux2')
    ERROR at line 1:
    ORA-06576: not a valid function or procedure name
    call initjvmaux.drp('drop table java$rmjvm$aux3')
    ERROR at line 1:
    ORA-06576: not a valid function or procedure name
    Table created.
    Table created.
    Table created.
    Index created.
    Index created.
    Index created.
    create or replace package rmjvm is
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01653: unable to extend table SYS.IDL_UB2$ by 128 in tablespace SYSTEM
    Warning: Package Body created with compilation errors.
    DOC>#######################################################################
    DOC>#######################################################################
    DOC> If the following rmjvm.check_for_rmjvm() statement results in
    DOC> ORA-00028 it means that the database has not been restarted
    DOC> since the rmjvm script was run. If so, restart the database and
    DOC> retry this script.
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>*/
    call rmjvm.check_for_rmjvm()
    ERROR at line 1:
    ORA-06576: not a valid function or procedure name
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    *************END OF LOG FILE**************************************************
    can somebody suggest me as to what should be done? and how can i install DBMS_JAVA Package?

    Hi Pranav,
    I donot have the script to generate the DBMS_JAVA package. If possible please forward me the script. Please help me in this. URGENT.
    Thanks in advance.
    VJ
    thanks Avi.
    I was able to install dbms_java pack. without any
    problems i also thought after seeing the spool that
    it's not able to extned system table but did'nt
    touced it as it was a little risky. Neways i extended
    the datafile.
    whcih way do you think is better a) extending the
    data file b) adding a new datafile to the tablespace?

  • Problem while installing Setup package

    Hi all,
    A week before i installed setup package on one device it worked perfectly fine.
    Today i created new setup package with parameter sets( MI_CONFIG and included parameter MobileEngine.Sync.Gateway.Service=/sap/bc/MJC/mi_host
    MI.Sync.ProtocolVersion=251500
    And did not added these two lines in Mobileengine.config file.
    My device is looping between two screen Ie Logon screen and change password screen. Whenever i enter the username and password it enters into Change password screen and then again to logon screen.
    What can be the problem?
    Thanks and Regards
    Neha Kapoor

    Hi Neha
       This is because after after you have created a setup package, a configuration tells the user to change his password on this first login to the client. If you open the MobileEngine.config file you will find an entry called <i><b>MobileEngine.Security.PasswordChangeRequired</b></i> with a value true.  Just set the value to false and restart MI.  If the parameter is not present, add the same and restart.  This should solve your problem and the change password page will never appear again.
    Best Regards
    Sivakumar

  • Problem with npm installing global packages

    If I try to install a global package with npm like :
    sudo npm install -g grunt
    npm will install the package in "/usr/lib/node_modules/". But it is not installing the executable anywhere.
    The result of npm -g bin is
    /usr/bin
    So that is where I would expect the executable to be placed. But nothing is there. So if I run grunt, it just complains that grunt can't be found.
    Any ideas? Thanks
    ====================
    EDIT: OK everyone, please ignore me, I'm just being thick.
    You don't install grunt globally. Grunt is the local package to install. To get the global grunt command, you install grunt-cli. Doing things correctly and everything works fine.
    Last edited by mongus (2014-03-29 21:10:47)

    This thread is a year and two days old.  The OP indicated what they had found and presumably are no longer following this thread.
    I have no idea what npm is about, but if the OP's comments don't help, pleas go ahead and open a new thread that you will own.   Maybe provide a bit more information.   In the mean time I am going to close this old thread.

  • Have a problem while installing Asmlib packages

    hi all
    I have some problem while installing ASMlib packages.
    my OS=Redhat linux 5.3
    kenel version using this command uname -r=2.6.18-128.el5
    I have downloaded packages and successfully installed following 4
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
    but while installing following got error
    rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
    kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
    kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
    kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
    thanx in advance

    I think you just need below rpms to configure asmlib:
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    Read this thread:
    Error install ASMLib on RedHat linux

  • Error target not found base-level failed to install the packages

    Im trying to install arch on my Virtualbox VM and its just returning:
    error target not found base-level failed to install the packages to new root
    What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

    Please read the following and follow the advice included:
    https://bbs.archlinux.org/viewtopic.php?id=57855
    With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command.  If it was in your original command, that would explain your results.

  • How to install/add packages to org.apache

    hi everyone!
    i'm pretty new with Java and i wanted to know how to install a package i downloaded from "http://www.apache.org/dist/jakarta/". the package name is poi and i have no clue how to do it so i'll be able to import some classes from it in my code... (i tried to just paste it the file src.zip at the location org/apache but it didn't worked)
    thanks for you help,
    shimon ;)

    "install" isn't really the right word. You'll have to learn to think differently about JARs in Java. because you don't "install" them and your apps don't get access to them via the operating system. They're more like dynamic link libraries or DLLs in Windows parlance.
    What you should do is figure out what a standard directory structure for all your applications will be, maybe something like this:
    application
    +
    +------source (put your .java source files in their package structure under here)
    +------lib (put your 3rd party JAF files under here)
    +------classes (compile your .class files to this directory)
    So in this case you'd put the POI JAR under /lib for your project. Tell Eclipse that /source is where it should expect to find all the .java file, that /class is the output directory for all compilations. Right click on the project folder, select "Properties", and add all the JARs to the build class path. Then you'll be all set with Eclipse.
    Tell Eclipse that application is the root of your project. Tell

  • Why pacman do not prompt I have installed that package???

    I found that pacman do not prompt installed packages. It leads to reinstalling packages.
    It's a bad situation...

    The times I miss "--needed" as default option, is when I install groups where I already have installed some packages of this group. Every time I see myself starting pacman twice. First without and then with "--needed".
    I mean whenever I explicit say "pacman install foo" and I already have foo, I expect pacman to just install foo, as I know what I'm doing. Or maybe it should say "You already have foo, do you really want (Y/N)?". But when I install a group and there are single packages already installed, then I want pacman to just install the rest of the group, not the packages that I already have.
    I see that this is a break in consistency, but maybe its more that what the user wants. At least its more what I want
    Maybe it could just be solved with the silly question "foo, bar and something other are already installed, do you want do install them again (Y/N)?"

  • Installing repository packages offline

    I am working on a Solaris 10 system not connected to Internet. Is there any means to download packages along with their dependencies to some other system connected to Internet and then install downloaded packages offline?

    Alan explained that Solaris 10 doesn't use a pkg repository but you can create a pkg server
    to serve pkgs or a JumpStart server to install systems.
    I never download images because we have internal pkg servers so I don't do these steps,
    but they should give you some ideas, The biggest factor is the system that is connected to
    the Internet. Does it have a DVD burner? Is it a UNIX system? I hope so.
    1. Download the sol-10-u10-ga2-sparc-dvd.iso image and either burn it to a DVD or save
    it as a file.
    2. You can make the DVD contents available over NFS or you can lofi mount the ISO file
    and make it available over NFS.
    3. When the pkg location is available over NFS, then you can point the pkg add command
    to that path, like this:
    # pkgadd -d /net/cyberman/export/s10u10/combined.s10s_u10wos/17b/Solaris_10/Product SUNWman
    Thanks, Cindy

  • Install a package from Solaris 10 cd

    Hello,
    I accidentaly removed a package (namely SUNWgcc) from the system. I have the Solaris 10 CDs. Is it possible to install this package for the CD? I check the CD and it looks like SUNWgcc on it is not a package that I can install with pkgadd -d.
    Thank You,
    PN.

    This does not seem to work from the Solaris 10 CD 1 -
    the CD directory structure is different.
    Specifically I am trying to install SUNWmfrun which
    is in the /cdrom/tmp/root/var/sadm/pkg directory.Don't go there.
    Stay in the Product directories on the CDs. You'll find the package there.
    However this directory doesn't have a pkgmap file in
    it so running the pkgadd command fails. No, that's not a package. /var/sadm/pkg contains information about the package database, so some of the files and directories there have the same name as packages (but they're not packages).
    Further investigation shows another directory,
    /cdrom/tmp/root/var/sadm/pkg/SUNWmfrun/save/pspool/SUN
    Wmfrun which does have that file, but running pkgadd
    against that directory fails completely.Still not a package.
    How can I use pkgadd to add packages from the first
    CD in the Solaris 10 installation?The packages are in the 'Product' directory.
    Your paths seem odd. You have a normally booted host and you're just inserting the CD? What are the contents of /cdrom?
    Darren

Maybe you are looking for

  • How can i open homepage in tabs always?

    Hello everyone, when i launch safari(5.0.4), it always open my homepage in a window. This was never a problem before, don't know how its happened. What i would like instead is that I have my homepage open in a TAB always. Since a couple of days, i ha

  • Byte Corseca headset - Charging problem

    Hi, I am using byte Corseca bluetooth headset for more than one year. Last  2 months back i got an issue in charging the headset. When i connect the headset to power source (USB Charging) usually i will show the red light glowing constantly. But now

  • Moved iTunes from pc to iMac...now have missing file links!

    Hi all. Just bought a new iMac and want to transfer my iTunes library and music to it from my pc. On my pc I had all my music consolidated and organised by itunes, and I transferred the entire itunes folder (music, library, etc) to my iMac via an ext

  • Deficit of BA

    HI I create a sale order and save a Delivery order but when i try to PGI it, system replay me a error that is " deficit of BA Unrestricted-used 10 CAR " any body can solve my problems Khan Moderator message : Not related to ABAP, post in relevant for

  • Report painter: CCSS: will pick up statistical posting?

    Hello Gents, will a painter sitting on CCSS table will pick statistical postings? (statistical as when journal entries are made with cost element type 11, posted on cost centers) Thanks for your help KR - Loï