Installing DeskJet 970 CSe over network to Win 7 64-bit system

My deskjet 970Cse is hard connected to our desktop running Windows XP Pro. I just bought a new laptop running Windows 7 64-bit. I was able to install the printer connecting the USB cable to the laptop without a hitch, however, I can't install it over the network. When I click Add Printer, Windows is able to find the printer, but after trying to connect, it says it can't find a driver on the network. When I click on OK to locate one manually, it asks me to locate the INF file. I tried pointing it to the Windows XP INF file I downloaded from the HP website but it says (obviously) that it cannot connect to the printer.
I'm assuming that if I'm able to connect the printer locally that connecting to it over a network should be able to work? Any workarounds to get it to work?
Or is my issue something HP might/will/won't solve when it supposedly releases Windows 7 drivers?
This question was solved.
View Solution.

markmitaly wrote:
I have a problem installing 970 cse, win 7.  HP site only gives option of 970 cxi. Therefore my printer 970 cse won't give me the option of double sided printing anymore... any suggestions?
The Deskjet 970cse and cxi drivers are the same.  You will need to enable the duplexer as described in the first part of this post in the Vista/Win 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HT201413 I am receiving the error code (-50). The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system. Is this why I get the error code? I can access the itunes store to view my account. Any ideas

    I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?

    Hello,
    The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Reader doesn't install on my Win 7 64 bit system. HD and install are both fresh but get an error that there is previous information?? concerning an install.

    Like it says: Reader doesn't install on my Win 7 64 bit system. HD and install are both fresh but get an error that there is previous information?? concerning an install.

    Please give the full, and exact, message. Thanks.

  • ITunes 64 bit installer rolls back action on win 8 64 bit system

    I do not know what i am doing wrong, I just bought a new win 8 64 bit system and iTunes keeps rolling back before the install completes. I have tried running it as administrator and turning off firewall but it did not work. Please Help.

    Apple iPad appears to be under "Portable Devices" section and driver is from Microsoft. There is no driver under USB-section and instructions that provided in first reply I have gone thru and they are no go with this problem - they are more likely for older iPod etc devices and dot with issue to deal with 64bit/32bit things. The picture (image.jpg) gives me unfortunately just general error...
    --IKemario

  • Installing FMW 11.1.1.3 on Win 7 64 bit

    Hi %,
    after successfully installing forms and reports (Win 7 64 bit) I tried to configure these managed servers by starting config.bat (as Administratpr). Now the process hangs at step 11 (Creating Domain in Progress).
    Any ideas?
    Best Regards,
    Rolf

    First, there is no need to relocate the system jdk. Part of your problem is more likely the result of a known limitation which is caused by the System PATH and/or CLASSPATH containing special characters like the parenthesis in (x86). So, do the following:
    Before you start, be sure that your machine has a static IP address. If it does not, you will need to install the Windows loopback adapter. Read the Installation Guide and System Requirements for more details.
    1. Clean up from your failed installation attempts. Be sure to also remove the C:\bea folder assuming no other product is using WLS.
    2. Uninstall the 64bit jdk then reinstall it where you prefer it. I would recommend its default location.
    3. Open a Notepad session and leave it open as a holding place to paste the following information.
    4. Open the System properties. Computer > right mouse click > Properties > Advanced System Properties > Environment Variables
    5. Locate PATH in the system variables and cut all of the values to the clipboard and paste them in the Notepad session you just opened above. Save this information for later.
    6. In the PATH value, set it to the following, be sure that the path to the jdk is correct for your installation:
    <blockquote>%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%;C:\Program Files\Java\jdk1.6.0_37\bin</blockquote>
    7. You will need the "generic" WLS download if you plan to run 64bit. This will be a jar file rather than an exe. Assuming you are using WLS 10.3.6, open a DOS window and start the installer as follows:
    <blockquote>java -jar C:\PathToJar\wls1036_generic.jar</blockquote>
    After you have completed the WLS installation and the FMw installation and configuration, you can reset your PATH back to the way you desire.

  • Rescue and Recovery 4.5 won't install to Win 7 64 bit system

    When installing Rescue and Recovery 4.5 to my ThinkPad E431, this message appears: "There is not enough free space on your computer to install or upgrade the Rescue and Recovery environment." This is a Windows 7 64 bit system, It has 7.5 Gb useable ram, 370Gb free space on the C partition of the drive, 7.75 Gb virual memory. What am I missing?

    run the cleaner: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    then trying re-installing.

  • Unable to install iTunes 10.5.0.142 on Windows 7 64 bits system

    I am not able to install the latest version of itunes, version 10.5.0.142, released by Apple last week.
    I think it is important to note that there are three pending updates on my system (Windows 7, 64 bit), which keep on failing again and again no matter what the mode of update (manual via microsoft website or automatic via the program provided by microsoft). These are:
    1. Security Update for Windows 7 for x64-based Systems (KB2556532)
    2. Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
    3. Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
    The methods that I have tried to install the latest version of itunes (all have failed as of now):
    a. Automatic via the previous version of itunes. This tries to download and install itunes in parts, but ultimately leads to the error originally pointed in this thread. Failed.
    b. Uninstalling the previous version of itunes completely as mentioned here: http://support.apple.com/kb/HT1923 and also using Microsoft Fixit and then trying to install the new version. Failed.
    c. Uninstalling all but apple software update, and then trying to update manually from the software update file available in c:\Program Files (x86)\Apple Software Update folder. Failed.
    d. Uninstalling all the versions of visual c++ (2005 and 2008), and then trying to install the latest version of itunes. Then re-installing the latest versions of c++ (2005, 2008 and 2010) along with updates but three as pointed above, and then trying to install the latest version of itunes. Failed.
    e. I have tried various permutations and combinations of keeping the firewall, antivirus and even the internet off and on. Failed.
    The combination of errors that I have received:
    - An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,version=“8.0.50727.6195″,type=“win32,publicKeyToken=“1fc8b3 b9a1e18e3b”,processorArchitecture=“x86”. Please refer to Help and Support for more information. HRESULT: 0x80073712
    - Error 7 indicating installation of microsoft .net framework 4.0 for me (http://support.apple.com/kb/TS3074) and
    - Error 2 - "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)
    However, I have seen on some websites that people have been able to install the latest version of itunes on their windows 7 64 bits system (surprising, but yeah).
    I would appreciate any pointers as to:
    ?1 How do I install the latest version of itunes on my system.
    ?2 If the steps are not included in the solution to ?1, how do I update 1., 2., and 3. mentioned above.
    ?3 If I am able to install itunes 10.5.0.142 on my windows 7 64 bit, would I be able to successfully my iPad2 to iOS5?
    Many thanks.

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • Printing problems with Deskjet 970 Cse

    Sometimes when I try to print a pdf file, the printer just prints a few lines of each page and skips the rest. I end up getting several pages output with only a few lines in each page. How can this be fixed? I am running Windows Vista.

    The troubleshooting steps in the document here may help.  I would also suggest you make sure you have the latest version of Adobe Reader.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can't upgrade or clean install new Blackberry Link in Win 8 32 bit system

    Hi Helpers,
    I cant install the New BB Link version on my system - (the previous version ran perfectly).
    Whether I try to update or clean install (old version now uninstalled). I get a pane saying that Microsoft visual C ++ 2008 Sp1 redistributable - W8  needs to be installed first.
    The process starts that install - but alwayys fails.  After that the BB Link install just closes.
    I can't seem to attach any screenshots (be helpful to be able to 'navigate' to them rather than type in a path).  But I havepasted below the full txt contained in the 'windows installer' pane that appears when the install fails.
    Can anyone suggest any way to correct this problem please?  Btw, the new BB Link installs perfectly onto Windows 7.
    Thanks in anticipation.  (On trying to post, I was informed that some invalid HTML has been removed - presumably that was in the 'paste' but I've no idea what it was or whether it affects anything, sorry).
    Regards, gil69.
    Re: BlackBerry Link v1.2.3.56 (Windows OS) install attempts:- 
    Windows ® Installer. V 5.0.9600.17415
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
    </package | /i> <Product.msi>
    Installs or configures a product
    /a <Product.msi>
    Administrative install - Installs a product on the network
    /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
    Advertises a product - m to all users, u to current user
    </uninstall | /x> <Product.msi | ProductCode>
    Uninstalls the product
    Display Options
    /quiet
    Quiet mode, no user interaction
    /passive
    Unattended mode - progress bar only
    /q[n|b|r|f]
    Sets user interface level
    n - No UI
    b - Basic UI
    r - Reduced UI
    f - Full UI (default)
    /help
    Help information
    Restart Options
    /norestart
    Do not restart after the installation is complete
    /promptrestart
    Prompts the user for restart if necessary
    /forcerestart
    Always restart the computer after installation
    Logging Options
    /l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
    i - Status messages
    w - Nonfatal warnings
    e - All error messages
    a - Start-up of actions
    r - Action-specific records
    u - User requests
    c - Initial UI parameters
    m - Out-of-memory or fatal exit information
    o - Out-of-disk-space messages
    p - Terminal properties
    v - Verbose output
    x - Extra debugging information
    + - Append to existing log file
    ! - Flush each line to the log
    * - Log all information, except for v and x options
    /log <LogFile>
    Equivalent of /l* <LogFile>
    Update Options
    /update <Update1.msp>[;Update2.msp]
    Applies update(s)
    /uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
    Remove update(s) for a product
    Repair Options
    /f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
    Repairs a product
    p - only if file is missing
    o - if file is missing or an older version is installed (default)
    e - if file is missing or an equal or older version is installed
    d - if file is missing or a different version is installed
    c - if file is missing or checksum does not match the calculated value
    a - forces all files to be reinstalled
    u - all required user-specific registry entries (default)
    m - all required computer-specific registry entries (default)
    s - all existing shortcuts (default)
    v - runs from source and recaches local package
    Setting Public Properties
    [PROPERTY=PropertyValue]
    Consult the Windows ® Installer SDK for additional documentation on the
    command line syntax.
    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.
    Solved!
    Go to Solution.

    I went back in the forum history to see Win 8 issues and how they were solved and found this post.
    http://supportforums.blackberry.com/t5/BlackBerry-Link/error-1406-and-windows-8/td-p/3012108
    I will see if I can find more as it does take a lot of time viewing each page one at a time.

  • How to install HP Color LaserJet 4600 Networked to Windows 7 (64 bits) ?

    I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print. 
      This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card. 
      Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.

    dan4757 wrote:
    I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print. 
      This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card. 
      Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.
    This should work for you.  I've installed several printers using a Jet Direct this way:
    Install the printer manually.  Go into Devices and Printers -> Click "Add a printer" then select "add a local printer" and select the option for "Create a new port - Standard TCP/IP Port" and click next.  Type the IP address of the printer into the Hostname/IP Address field then click "next" -  Choose Hewlett Packard Jet Direct from the Standard drop down menu then click next.  You will need to select your printer model/driver from the list and then click next.  

  • I upgraded to Firefox 7.0 on Win 7 32-bit system and can no longer download personas. I setup a collection and can't use that either.

    I finally upgraded from Firefox 3.6.8 to Firefox 7.0 this morning. I don't like the default theme, so I tried to download a new persona and do not see a "wear this" button any longer. On the screen where I should see a button that installs it on my desktop, I have an option to download Firefox or to add the persona to a collection. I created a collection and added 2 themes, but even that won't allow me to actually install the persona in Firefox.

    Try a reset ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Inspiration Browser no internet warning in win 7 64 bit PSE 10

    Installed Photoshop Elements 10 bundle on a win 7 64 bit system, registered software.
    Everything seems to work except Inspiration Browser. when loading through Elements a  window pop up stating " Warning no network available please check your connection"
    I have an internet connecton and it's not being block by firewall. 

    Uninstalling through Windows 7 Programs manager in the control panell then reinstalling worked great and I now have access to all the help videos etc.
    Thanks and Kindest Regards!
    Michael
    (Granpuff)

  • Cannot install CS3 on Win-7 64-Bit

    I have a brand new Win-7 64-bit system.
    I still have the install files for CS3 Web Premium that I downloaded 3 years ago.
    I have had various problems.
    Installed at first and programs hung or failed to open.
    I tried going back to a restore point and installing again.
    I read somewhere this may have been a bad idea - don't know why.
    However, my latest methodology has been:
    Copy the install files to the new machine.
    Deactivate the software on the old machine.
    Extract the AdobePDF.dll_64 from the data1.cab
    Ran the install. - pointing to the AdobePDF.dll when prompted.
    Acrobat 8 and shared components installed  but did not work.
    Everything else says "Component Install Failed" - no other explanation or help.
    Get the vista licensing patch and install it.   - when I did this I was able to get Acrobat 8 to run and not hang.
    Updated Acrobat to 8.1.3.
    Tried the install again.
    I still get "Component Install Failed" for everything.  No idea why.
    I have read through lots of stuff on the forums.  Found out about the AdobePDF.dll_64 and the licensing patch.
    Haven't found anyone else who tried going to a restore point.  If that is my problem what do I do.  I have restored a couple of times and cannot get back to where I was on the first install.  Since I am just getting started, I could return to factory install on the machine and try again - but I only want to do that if it will actually work!!  I having been at this for two days and I would like to move on!!

    OK.  It turns out the restore was in fact what killed me.  The restore removed some, but not all, of the Adobe install I had tried.  This was enough to screw up all future install attempts.
    The restore point thing in windows sounds nice, but I guess it can be dangerous.  
    I had messed things up with all my install attempts, so I restored the machine to factory settings - a clean win-7 install - and then followed the instructions found here: http://forums.adobe.com/message/2335063 and it worked.

  • 11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit

    Hi Experts,
    I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
    I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
    I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
    However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
    (No error, after waiting for >20 minutes I have to kill the command.)
    =================
    Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
    - "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
    Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
    - 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
    [    CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
    "tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
    Output of LSNRCTL:
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
    Start Date 26-APR-2012 14:35:17
    Uptime 0 days 0 hr. 4 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
    Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    Services Summary...
    Service "O11GR2" has 2 instance(s).
    Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
    Instance "O11GR2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    =================
    This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
    I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
    Any suggest/help is greatly appreciated on this.

    ------------------------------tnsping-------------------------
    C:\>tnsping o11gr2
    TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
    ))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
    OK (30 msec)
    C:\>
    -----------------------------ping-------------------------------
    C:\>ping J1009615W7LT.jda.corp.local
    Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Ping statistics for fe80::20c9:b748:311a:95e4%14:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\>ping 10.60.200.221
    Pinging 10.60.200.221 with 32 bytes of data:
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Ping statistics for 10.60.200.221:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\>
    -----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
    </msg>
    <msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:26 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:43 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:37:08 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>WARNING: Subscription for node down event still pending
    </txt>
    </msg>
    <msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Trace level is currently 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Started with pid=11640
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Listener completed notification to CRS on start
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:54:32 * ping * 0
    </txt>
    </msg>
    Edited by: 850920 on Apr 26, 2012 11:59 AM

  • Unable To Sync After Migrating From Win XP(32 bit) to Win 7(64bit)

    I received a new PC, dual core platform, for XMAS.  However, I received a Com 1 port failure when performing a Hot Synch to upload my PD(,M500) data to Palm Desktop on the new PC.  Palm tech support said there is no USB driver available for the 64 bit OS.  Does anyone have a 3rd party USB driver, or any other suggestions to allow me to do a Hot Synch on my new PC.
    Thx,
    Ed
    Post relates to: Palm m500

    Originally Posted by mystico2
    Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
    any help?
    Try to use Windows XP SP2/3 compatibility mode first, see if it works for you. And use Alchemy for the Audigy 2 ZS, FS2004 is making use of Directsound after all. Read the guide for using Alchemy here and here. Download Creative Alchemy here.
    Hope it works for you!

Maybe you are looking for