Installing dev and quality BW system one one hana db

Hi Experts,
We are trying to install Dev and BW quality system on one HANA appliance. Please reply with any of the best practices and docs for this type of installations.
Thank you,
Praveen

Hi Praveen,
Hardware resources permitting, SAP supports running multiple HANA databases (or SIDs) on a single non-production HANA system.
While original HANA appliance is installed and delivered by your hardware partner with a single database, you could use SAP HANA Lifecycle Manager to install additional HANA databases on to the appliance. Of course, you need to ensure resources are available on existing appliance.
Few URLs towards MCOS and BW on HANA as follows:
SAP Note 1681092 - Multiple SAP HANA databases on one SAP HANA system
SAP Note 1666670 - BW on SAP HANA - landscape deployment planning
Multiple applications running on single SAP HAN... | SAP HANA
Few sizing notes for BW on HANA as follows, which will be of use:
SAP Note 1637145 - SAP BW on HANA: Sizing SAP In-Memory Database
SAP Note 1736976 - Sizing Report for BW on HANA
Post-installation, ensure to fine-tune configuration parameters to exploit optimum performance for each of the database running on the appliance
Wish you all the best towards your installation!
Best regards,
Shaji

Similar Messages

Is ST-PI and ST-A/PI needs to be installed in DEV and Quality Systems.

Environment:
ERP and BI 6.0 / Windows / SQLServer 2005
Hi All,
Is ST-PI and ST-A/PI needs to be applied to DEV and Quality Systems of ERP and BW.
I understand that ST-PI and ST-A/PI are necessary for Production Environment.
Is it recommended to install or upgrade the same in Dev and Quality Systems of ERP and BW.
Because I believe it is always good practice to keep all systems Support Packages including ST-PI and ST-A/PI the same in the same Landscape. (But could not find any documents from SAP.)
Thanks and Best Regards,
Raghunahth L.

Hi Raghu,
you can get into the problems which I have said if you dont implement that,also many support packs do have their dependencies on ST-PI and ST-A/PI and seriously I havent heard people implementing this on prod and not dev and qa....I have worked on with many big clients but never heard this
Also if you ignore whatever I have said,still it is still recommended that you never apply anything directly on Production,It is always better if you first implement on dev and qa and see if you are facing any issues while implementing...so its always better to implement on dev and then qa
and It doesnt take too much of time,so that should not be an issue after all
Always follow SAP best Practices
Rohit

I want to install DEV and QAS on same Server

Hello all,
Can anybody tell the step by step procedure to install dev and qas on the same server, i have installed Dev with win 03 server and oracle as a DB.
Now what to do? please provide some document or note to do this.
I am waiting for ur reply, its urgent....
Jitender

Hello Mr.X,
SAP suggests that even for a single system installation data files,redo log files and back up of log files should be placed on different hard disks. So it makes sense to do the same for different instances as well. Going to ORA_HOME you need mutiple ORA_HOME.
For mutiple ORA_HOME please check this link :
http://www.lc.leidenuniv.nl/awcourse/oracle/em.920/a96697/moh.htm.
System number definitely have to be different. System number will also influence the ports.
Also check the SAP installation guide for installation of 4:6C on unix/oracle platform. It discusses this mutiple database instance concept. Other higher release installation guides also do that.
Please award points for useful answers.
Regards.
Ruchit.

Smartform working fine in DEV and Quality But Problem in Production server

Hi
i had done a smartform ..that is working fine in devlopement and
quality server but the data in few of the column not appearing in production
server.i had debug it and found prolem in S0RT Syntax ..Had not faced this kind of problem before i had 20 records in my itab.
iam sorting it by vbeln and posnr ....
and deleting the adjacent duplicates ....comparing veln and posnr...
both are same ..in 20 records .
but iam fetching the adrees number at first in the loop.
so the first record of table is with adrs number...
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403 290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
if i sort the above table in devlopement and quality ..it will be in the same way
as above but in production it gets sorted in this way
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403 290644
and when i delete duplicate only i get
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
in this where i dont get the adrs number so cant get adrs detail...
Can anyone theie tell me what is the problem with it ONLY IN PRODUCTION SERVER..
ITS WORKING FINE DEV AND QUALITY SERVER...
REGARDS....

are u using my DELETE keywords ?
if yes , then use
delete adjacent duplicates from itab comparing all fields.
Regards
Prabhu

Difference between workflow engine and quality assurance system

Hi,
please let me know the difference between workflow engine and quality assurance system.

Hi,
please let me know the difference between workflow engine and quality assurance system in TMS.

How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

Hi,
You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
Here are the links that will guide you through the process:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Performing an HP System Recovery (Windows 7)
Order USB Recovery
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Organization unit ID is different in Dev and Quality Systems

Hi Experts,
We have downloaded the Organizational Structure from ECC in the Dev System, Sales organizations, Sales offices and sales groups were created with number range Assigned to Current Active Plan version. but the number for the Sales orgs started with 50000026 instead of starting with 50000001. And in the Quality again we have downloaded the Org. structure from ECC, now the IDs were created starting from 50000007. this causing the inconsistencies in the Qualtiy System like, Pricing procedures are not getting determined.
why the Ids were created from 50000026 instead of 50000001.
What are best practices to have the same ID for Organizational Units in both the Systems?
Thanks and Regards,
S Reddy

Hi Kiran,
thanks for responses,
Now we are planning to delete the Org. Structure in Quality and planning transport if from Development. What is best approach to save the Org. model in Transport request and move to Quality. I came to know about the report RHMOVE30, will it be used for transporting from Dev to Quality?
One more thing, if we transfer the Org data to Quality will it take the same no. in Quality. I have doubt, If Dev Org Id were created from 50000026 and Quality it will start from 50000000.
Kindly help me,
thanks and Regards,
S Reddy

After System copy all objects become modified state in Dev and Quality .

Hello All.
we have 5 source systems, recently we did system copy for 4 source systems but only one system alone not participated.
so now all objects in SS become modified state in development and quality.
earlier in Sys copy i faced the same problem in quality i will do the transport form dev to quality. but now in development itself its in modified state how can activate it?
Thank you!
Regards,
Ranga
Edited by: Ranga123 on Jan 10, 2012 5:57 PM

Hi,
Looks like system copy is not performed correctly.
But there are options like
go to source system
myself BW system right click actiuvate and replicate option
similarly for SAP R/3 source system.Right click and activate
then there are other transactions in case there are specific objects to be activated
RSDG_CUBE_ACTIVATE
RSDG_IOBJ_ACTIVATE
SO ON
Thanks

SPDD and SPAU Request from Multiple Source System (Dev and Quality) ??

Hi all,
We have one query related with SPDD and SPAU automatic adjustment during Upgrade.
We done SPDD in our Development systems and same is taken by SAPup during Quality Sytem PREPARE step from umauto.lst file.
But we adjusted some object in Quality System as the SPDD request from Develpopment does not able to adjust all the request. We created one request for the Same in Quality System and the that also got added to umauto.lst file.
Now during our during Mock run Upgrade, PREPARE ask to take only one system for SPDD request with following options
1. missing systems
2. Development (DEV)
3. Quality (QAS)
4. None
But we need both transport of SPDD from DEV and QAN to be imported to Mock run Systems till Production.
any suggestion to fix this ?

Hi,
Give the DEV requests for SPDD, and proceed. During DDIC_700 you will come across the DD objects which need to be corrected as you have done in QAS. here you need to open the system and correct them manually. Then only you should proceed. Be very carefull during this activity, as you may loose data if not done correctly.
Regards,
Suhas

Can we install Dev and QA in Single Server

hi
Now we r going to sizing the BW System.
we getting data only fro HR,FI,CO and MM
Can we installed the BW Dev and QA in one server
Do we need have seperate serversfor each of them
Total concurrent of users would be 25
Can anyone help me out
Thanks

linda,
you can indeed have the servers in the same servers - there is a name for this - it is called MCOD - multiple components in one database , you can either look at having different DB for the above or sharing the same DB , it will be a matter of server sizing thats all and configuring the transport connections.
On an average assume 300MB (150 App + 150 DB) of RAM per concurrent users.
also have a look at service.sap.com/sizing....
Arun
Assign points if it helps..

Dev and Production BW systems not in sync.

Hello All,
We have been using two BW systems for our implementation project. One is the development and second one is production BW system. I observed that few BW objects have different configuration (like update rules, user exits, queries , web templatesetc) in the production compared to the development system. Now my requirement is to find out the all the BW objects in the production that having different status than development. So that I can make corresponding changes in the development system as well in order to sync dev and production systems.
1. Is there any tool/transaction is available by which I can retrieve the list of the BW objects and may be delta changes between dev and prd systems.
2. Or any standard process exists to sync the both versions.
Any help to this will be highly appreciated.
Thanks in advance.
Regards
Harsh.

Hi Harsh,
For the Transfer rules/update rules you can do a remote compare of the Generated Program which would give you an idea whether they are in sync or not. Likewise you can do remote compare of the User exit fn module.
Bye
Dinesh

Installed Mavericks and now my system partition needs repair

Hi All,
I upgraded to Mavericks yesterday, but after the install my MBP's performance/responsiveness was substantially degraded.
Today (after reading posts from users experiencing similar issues on the forum) I ran disk utility. After verifying the disk, the utility told me there was a problem with my system partition, and that I would need to run disk utility from recovery mode (cmd + r).
I did so, and when I verify the disk from recovery it returns: "The partition map needs to be repaired because there's a problem with the EFI system partition's file system". When I attempt to repair the partition, I receive an alert that: "Live file system repair is not supported".
Now I can't even boot into the log-in page, and the only area I can access (aside from the blank grey screen with a picture of a folder on it) is the recovery mode. I would really like to avoid re-installing Lion from recovery mode and losing all my programs, settings, etc. Any advice would be much appreciated.
Thanks in advance.

My two cents: I upgraded to Mavericks and found the EFI corruption error when verifying permissions immediately afterward. Tried the install a couple of times to make sure it wasn't a fluke. I was unsure how to get Lion back on the laptop, as the Mavericks istaller had updated my HD Recovery to 10.9, and my back up was manually done; I wanted a truly clean install without using migration assistant or Time Machine.
However, by completley erasing my hard drive and doing internet recovery, Lion was available. I'm back in business with a clean install of Lion and won't be trying Mavericks again anytime soon.
Incidently, my OS volume was okay and I could use the computer. As far as I could tell, only the EFI partition was corrupted. Not sure of the long term effects of that, but assume I wouldn't be able to accept firmware updates in the future at the very least, and who knows what else might develop, as several of the other posters here are experiencing. Feel like I got off relatively lucky.
I mostly wanted to point out that the machine's original OS recovery should be available via internet recovery, even after the Mavericks install has removed that option from the HD recovery.

Transport Request for creating Organisation structure in DEV and Quality.

Dear Gurus,
I have a issue regarding transport request creation for creating organisation structure.
My client has their own basis team, Iam doing the customization in Dev server, when iam creating organsiation structure in dev server ( Easy Access) iam unable to generate transport request, Their basis team is saying that no transport request is created in easy access.
My question is weather transport request is to be generated in Dev (Gloden client) for creating organsiation structure or not. Please guide me.

Hi Ravi,
You can try report RHMOVE00.
It is up to you to either maintain the org structure in dev server and tranport to quality or maintain it directly in quality.
Regards,
Dilek

How to add EP(DEV and QAS and PRD systems in solution manager)

Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.

I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.

Loading two different SAP BW system from one SAP R/3

Hi all,
is it possible to load the data from one SAP R/3 4.7 to two different SAP BW systems in parallel?:
A) BW 2.1C
B) BW 3.5
I mean not because R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side.
Are there any other restrictions? Ar there any workarounds how to hande this situation?
Thanks,
m./

Hi dear,
I think you shouldn't have any problem!
Look at OSS Note 775568 'Two and more BW systems against one OLTP system' to have more details...
"R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side"...what's your plug-in version in R/3 ? I can't understand what do you mean with "R/3 Plug-In installed on BW side" !!!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here, my dear colleague !

Installing dev and quality BW system one one hana db

Similar Messages

Maybe you are looking for