Installing deveoper suite 10g on windows 7

Hi
I am installing Oracle Developer Suite 10g (10.1.2) on Windows 7 32-bit as per note ID 1292919.1.
As per the note i downloaded the patch Patch 10396165 and tries the invoke the oracle universal installer from setup.exe of the patch
as per the below command:
D:\patches\p10396165_101210_WINNT\Disk1\install>setup.exe -ignoreSysPrereqs
But the universal installer does not get invoke, it exists without any error.
the logs are provided below:
Using paramFile: C:\Documents and Settings\charasin\Desktop\patches\p10396165_101210_WINNT\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
Any suggestions, how i should continue installing this..
Charan

To Install Develoer On Window 7, per my knowledge the best and easiest source for follow is
http://windows7bugs.wordpress.com/
YOu can post your reply here or at above link
charanjaitu wrote:
Hi
I am installing Oracle Developer Suite 10g (10.1.2) on Windows 7 32-bit as per note ID 1292919.1.
As per the note i downloaded the patch Patch 10396165 and tries the invoke the oracle universal installer from setup.exe of the patch
as per the below command:
D:\patches\p10396165_101210_WINNT\Disk1\install>setup.exe -ignoreSysPrereqs
But the universal installer does not get invoke, it exists without any error.
the logs are provided below:
Using paramFile: C:\Documents and Settings\charasin\Desktop\patches\p10396165_101210_WINNT\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
Any suggestions, how i should continue installing this..
Charan

Similar Messages

Install developer suite 10g on windows 7

hi to all,
I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Error Installing Developer suite 10g in windows 7

hi everyone,
I hve installed oracle 11g R.2 in my machine, now when i try to install oracle developer suite 10g directly using setup.exe it becomes not responding. I hve changed the compatibility mode, since getting the same. So i tried with oracle universal installer 11g but it shows an error and stops installing
error :
some components in the stage area have stage version less than 10.2.0.0.0. please ensure that all the components have their stage version greater than or equal to 10.2.0.0.0.
Pls help me to install this. I need oracle forms and reports.
Thanks for the reply.

Hi,
Please refer links below:
http://windows7bugs.wordpress.com/2010/02/18/install-oracle-10g-onward-database-developer-on-windows-7/
How to Install Oracle 10g in Windows 7 Home premium 64bit operating system
Hope this helps :)
thanks,
X A H E E R

Installing Developer Suite 10g for Windows

As part of a prototype test for upgrading to 10g we have installed Oracle 9i database onto a Windows XP PC and are now trying to install the developer suite 10g.
The ORACLE_HOME directory for the DB is D:\Oracle\ora92.
The Oracle Uinversal Installer defaults to this directory for Oracle Home when we try to install the 10g software, but we then get the following error:
Dependencies
Oracle Developer SUite 10g cannot be installed into an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home.
Could you advise please.

Yes, and got the message - install has encountered an error while attempting to verify your virtual memory settings....
We have changed the paging size for the D: drive where we were trying to load to - and it has loaded OK now thanks.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Installation of an Oracle Developer Suite 10g on Windows XP doesnt work

Hello.
I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
*** Welcome Page***
Initializing install inventory
Setting up install inventory
*** Specify File Locations Page***
Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
Initializing OUI access setup
Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
Error:*** Alert: null ***
User Selected: Cancel
Can anybody help me? I am very confused about this error message.
Thanks very much.
Petr.

Are you logged in as an administrator?
I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory.

To install developer suite 10g wondows2003

hi to all,
I would like to install developer suite 10g on my notebook windows2003 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Problem after installing Oracle DevSuite 10g on Windows 7 (64-bit)

Hi All,
I have successfully installed Oracle DevSuite 10g on Windows 7 -64 bit machine.
But when I open the existing .rdf file which is having around 3MB file... report builder is getting closed automatically. And the same is working for the .rdf file having just 100 KB file.
Can anyone please guide me thru?
Thanks,
Harish Nunna

5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM AIX on POWER Systems (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 8, 2008     2.1 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on x86 (32-bit) (American English)     General     Oracle Fusion Middleware Family     Aug 29, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on POWER Systems (American English)     General     Oracle Fusion Middleware Family     Jul 17, 2008     1.1 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows Itanium (64-bit) (American English)     General     Oracle Fusion Middleware Family     Jun 3, 2008     2 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP Tru64 UNIX (American English)     General     Oracle Fusion Middleware Family     May 16, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux Itanium (American English)     General     Oracle Fusion Middleware Family     May 14, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on System z (American English)     General     Oracle Fusion Middleware Family     Sep 15, 2009     1.5 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux x86 (American English)     General     Oracle Fusion Middleware Family     Apr 5, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX PA-RISC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.9 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX Itanium (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on SPARC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows (32-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.6 GB
None of these say windows -7 patch. Its only for windows 32 bit.

How to install developer Suite 10g on linux 9

i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

Installing SOA Suite 10g

Hello everybody,
Can anybody help me install Soa Suite 10g env on HP-UX Itanium?
The problem has been to find the install files and documentation. I only founded 11g related.
Thanks in advance.

check this page:
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
Thanks,
Navaneeth

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

Unable to install Oracle Developer Suite 10g on Windows 7

Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.

The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Installing Developer Suite 10g R2 on Windows Vista failed !!

It seems Oracle has a new challenge of producing a new edition of Developer Suite that will install on Windows newest falvour, Vista. I installed Oracle db 11g on my Vista O.S. and everything runs normally. But my Developer Suite 10g R2 failed to launch setup.exe, giving me the following error:
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2007-11-16_06-40-54PM.log
Please press Enter to exit...
Any idea to solve the problem? Or it's all that I have to wait Oracle for an 11g Developer Suite version that is supported by Vista??!
Thanks!

Either your tnsnames.ora file that Forms is using is not set up properly to connect to your database, or else you need to install the Microsoft Loopback Adapter.
I have set up laptops with a Loopback Adapter, so Forms will connect regardless of the Windows computer name. If the computer name is included in the tnsnames entry for your on-board database, then you probably don't need it.
When you installed the 11g database, the installation set up a tnsnames.ora file with an entry for that database. First, try copying the entry into the corresponding tnsnames.ora file used by Forms.
In my system, I have four distinct tnsnames.ora files, each one is a duplicate of the others. Whenever I need to change an entry, I do it in one of them, then do a Save As three times to replace the other three. I use these comment lines at the top of the file to help me:
#-- For reference, save as: C:\oracle\tnsnames___ref.ora
#-- For Forms6i,   save as: C:\oracle\orant\NET80\admin\tnsnames.ora
#-- For Forms10,   save as: C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
#-- For SQL Plus10,save as: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.oraWithin the laptop running withOUT the loopback adapter, this is the entry for the on-board Oracle 10 database:
#-- Laptop           Could use: (HOST = Steve-PC) / 127.0.0.1
ORCL =          (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)
                                  (HOST = 127.0.0.1)
                                  (PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)
                          (SERVICE_NAME = orcl) ) )Note the replacement of the HOST entry from the Windows computer name with the generic IP address for the local platform.

Does Windows 2003 supports to install SOA suite 10g

Dear all,
Does windows 2003 server machine supports to install Oracle SOA Suite 10g. Or, will it loses any features.
Where can I find system minimum requirements (for windows) to install Oracle SOA Server suite 10g.
Thanks,
Rajesh A

Hi Rajesh,
Yes, Windows 2003 server supports all features of Oracle SOA Suite.
See to that you have atleast 2GB of RAM.
Thanks,
RV

Installing deveoper suite 10g on windows 7

Similar Messages

Maybe you are looking for