Installing DM11.5 under Win7 64bit

Has anyone successfully installed and used DM 11.5 under Windows 7 64bit? I've tried it on two different computers (a laptop and a desktop) and in both cases when I try and "Open" or "Join" a workspace as soon as Studio tries to open a Windows Explorer window so I can browse to the .DXM the program locks up and crashes.
With Studio closed, if I go through Windows Explorer, find a .DXM and double click it, Studio will open OK. However, if any setting is off and Studio wants to 'browse' for the missing file (.dxs or .ini) then the program locks up.
I believe the patch level of 11.5 we are using is p0 or p1.

I have now tried the install on a Win7 32-bit PC and received the exact same results. The 64-bit systems were Windows 7 Home and the 32-bit was Ultimate.
I have also confirmed that the 11.5 system is P01.
I am interested to know if anyone else is having this problems as our office is currently upgrading ALL PC's to Windows 7 over the next 12 months. Our clients are also moving to Win7 so if there is a compatibility issue, I'd love to know sooner rather than later.
I verified in the DM 11.5 Install guide that only XP and Vista are documented as tested.

Similar Messages

  • CHM does not display under Win7 64bit

    Hi all,
    the CHMs generated unter Win 7 32bit do not open correctly under Windows 7 Enterprise SP1 64bit. The CHM viewer opens and the TOC is visible, but all pages are empty (white, no error message). The CHM is stored locally. The same CHM can be viewed without problems under Win7 32bit.
    Any ideas about this?
    Robert

    Wrong information - sorry! The CHMs were generated under Windows 7 Enterprise 64bit as well. That means they do not display on the same computer they were gnerated on, but under other systems that have 32bit OS (Win7 or XP).

  • Encore CS3 library install fails on win7 64bit pro

    Hi
    Just installing my discs from Premiere Pro CS3 onto a win 7 64 bit pro PC, which was my Win X 32bit PC but with all new components except Power supply unit and my Audigy X-Fi elite pro sound card.
    Exit Kaspersky IS 2014.
    Premiere CS3 failed to go on though other third part components did.
    I then disabled Kaspersky IS 2014 AND made the User Account Control 'off', and bingo, it worked.
    So now reboot and turn off KIS and check UAC is off, and proceed, install Encore CS3. it went on
    However Encore CS3 library has a red X.
    try again select install library, long wait for the green progress bar to finish, result still not on.
    Why and what else can I do ?
    Has anyone else had a battle installing CS3 onto win7 pro 64bit or just win7 64 bit ?
    Merlin

    CS3 is 32 bit. But it sounds like you got that part to work. Does Encore run? I don't think that is the issue; I suspect permissions.
    If you are just wanting menus, etc, just use the CS6 download. Don't use one of the links with an installer; just download and unzip to the correct location. The menus were not updated from the pre-CS4 pars (Encore knows to do this), so I suspect you will be fine. I have not actually used the recent library with CS3.
    Encore Help | Download full library content/functional content

  • No thumbnail rotation in Bridge CS4 under Win7/64bit

    Bridge CS4 was working fine under Vista 64bit.  After updating to Windows 7 64bit thumbnail rotation does not work (neither using [] shortcuts, nor the tolbar arrows).  My computer has a GeForce 8600GT, to date in terms of updates.  I tried resetting the preferences, purging the cache etc to no avail.  Any suggestions?
    TIA

    Memory can also mean inadequate page file, memory problems, or cache.  Also, since it is a new computer don't rule out defective RAM.

  • Cannot open or save files after re-install CS4 on Win7 64bit

    Hi,
    Re-isnstallation of CS4 on a win7 64bit plattform was no problem. But - I can not open any kind of files, neither *.psd nor *.jpg. Even creating a new file in Photoshop is not possible. I do not get a message from Adobe/Photoshop.
    Now I am looking for any idea to solve this problem.
    Thanks

    Ok, I will add this question in the Photoshop forum and copy it to the Illustrator forum as well.
    Thanks

  • Several error installing itunes in win7 64bits

    Hi! This is the error that occurred on my computer to install itunes 10. I recently purchased iPhone 4 but I can't install Itunes10. Earlier this computer boast an older version of itunes but recently, I've formated it and I cannot install itunes now. Operating system Windows7 64bt, antivirus microsoft security essentials. Some suggestions? Thanks in advance
    "An error occurred during installation of assembly `Microsoft.vc80.CRT, version="8.0.50727.4053", type="win32", publickeytoken= "1fc8b3b9a1e18e3b",process or architecture="86". Please referto help and support for more information. Hresult:0x80070002"
    Message was edited by: Galopin

    Hresult:0x80070002
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up +en passant.+
    Go into your Windows update and try to check for new updates. Do they fail to install? If so, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you?
    If the Windows Update errors are also 80070002s, then try the following Microsoft document:
    [Windows Update error 80070002|http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80070 002]
    If that gets your Windows Updates installing again, stock up on any you're behind on. Then try another iTunes install Does it go through properly this time?

  • Flash install problems on Win7 64bit install_flashplayer10_chrd_aih_1_1_1_1_1_1_1_1_1_1.exe

    Flash Version: Adobe Flash Player 10.3.183.7 (2,94 MB)
    Windows: Win 7 - 64 Bit SP1, German
    Hi,
    My system hdd crashed last week  (yes, I have a data backup) and last weekend I'm started to reinstall everything.
    At the point, I started to install flash player or acrobat reader, I came to an problem.
    I download the installer "install_flashplayer10_chrd_aih.exe" and put it on the desktop. Right click, start as admin and the exe disappeares. (I'm member of the admin group, system is not member of an Active Directory)
    I checked process list an I found the process which flips:
    started with: install_flashplayer10_chrd_aih.exe
    this started install_flashplayer10_chrd_aih_1.exe which started
    install_flashplayer10_chrd_aih_1_1.exe and this started
    install_flashplayer10_chrd_aih_1_1_1.exe
    After the new process started, the older process kills automatically. Only two adobe jobs are in the process list all the time.
    In the temp folder, I found
    install_flashplayer10_chrd_aih.exe
    install_flashplayer10_chrd_aih_1.exe
    install_flashplayer10_chrd_aih_1_1.exe
    install_flashplayer10_chrd_aih_1_1_1.exe
    install_flashplayer10_chrd_aih_1_1_1_1.exe
    install_flashplayer10_chrd_aih_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1 _1_1_1_1_1_1_1_1_1_1.exe
    and lot of more.....
    I restarted my system several time, disabled AVG antivirus, installed lates Microsoft patches and I tried to unpack the Adobe executable but stops with a password request. Looks like the exe is password protected.
    The funny thing is, that I have the same problem with the acrobat reader X.
    I never saw this problem before, all other installer (Office, Firefox, Irfanview, Itunes, ....) works well, only the Adobe installer are all broken.
    How I can fix that whithout reinstalling everything. Please help.
    Thanks a lot
    Erik

    Download the Flash Player installer from the link in http://forums.adobe.com/thread/889580
    Download the Adobe Reader installer from http://get.adobe.com/reader/enterprise/

  • Critical Error installing CS3 on Win7 64bit

    Hi all,
    I've combed through the forums and tried every fix that I've read, however nothing has worked.  I've just been given a new work laptop with a clean install of Windows 7 64-bit Enterprise Edition running SP1.  Full administrator privledges.
    I am attempting to install Adobe Photoshop CS3 straight from the DVD, so no updates, patches, etc.
    After running either the autorun or directly setup.exe within the Adobe CS3 folder, the Initializing Adobe Photoshop CS3 bar makes it between 80-90% before jumping to the Loading Setup screen where I'm presented with the error, "Critical errors were found in setup. Please see the Setup log file for details."
    OK, the support pages have had me look for "FATAL" (case sensitive) within the setup log.  It appears on the very last line of the 80 mb text file.  Here's the surrounding elements:
    loading page "installationProgress" from C:\Program Files (x86)\Common Files\Adobe\Installers\2ac78060bc5856b0c1cf873bb919b58\resources\pages\installationProgre ss\installationProgress.js
    updating path to Win32
    WizardControl: loading page "complete" from C:\Program Files (x86)\Common Files\Adobe\Installers\2ac78060bc5856b0c1cf873bb919b58\resources\pages\complete\complete. js
    HTML data complete: systemCheck
    Using cached language set
    HTML data complete: eula
    Using cached language set
    Using cached language set
    [    6460] Thu Aug 09 15:44:20 2012 FATAL
    Critical errors were found in setup
    Please see the Setup log file for details.
    [    6460] Thu Aug 09 15:45:11 2012  INFO
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    I've used Adobe Cleaner.  I've been through the registry.  I'm not sure where to turn now.  Any help?
    Edit: additional system specs:
    160 GB free on C:
    4 GB RAM
    Adobe Reader and Acrobat are also installed, however Acrobat was installed well after I began receiving this error.  I haven't tried running it with Reader completely uninstalled.

    You do know that it's not supported to run Photoshop CS3 on Windows 7, right?
    That said, it should be possible to make it work.
    Have you tried running the installer As Administrator?  UAC doesn't actually GIVE you administrative privileges unless you specifically escalate the installation.  Complete unawareness of UAC is one of the reasons Adobe doesn't support running Photoshop CS3 on Windows 7.
    If you're saddled with problems running older applications on Windows 7 and really need the compatibility vs. the dubious added protection UAC provides, there is a way to turn UAC off.  But I suggest you read about UAC and fully understand what it does before taking that route.
    -Noel

  • Installing itunes on WIN7 64bit

    i tried installing itunes 64 on windows 7 64 bit - but the installation won't start, it does nothing, what do i need to do ?

    Usually antivirus is the cause. Try to start AMDS manually see what it does, if effect is the same, I would switch antivirus.
    Close iTunes and disconnect the iPhone, iPad, or iPod touch.
    Click the Windows Start button .
    In the Start Search field type Services.
    In the Programs section of the search results, Click "Services".
    Select Apple Mobile Device and click Stop the service
    After the service has stopped, click Start the service.
    After the Apple Mobile Device service has started again, open iTunes and connect the device.
    Here is the source for instructions:
    How to restart the Apple Mobile Device Service (AMDS) on Windows

  • ESATA over Expresscard W500/Win7 64Bit problem

    I am using a W500-4061AK3 with Windows 7 (64bit) and am not able to get my external harddisk running over an eSATA expansioncard (Trust IF-3800p) in the Expresscard slot, although the whole is perfectly working under Ubuntu 9.1. This is already the second card I try, same issue with the DeLock 61748 (Silicon Image 3531 Chipset) ... I have installed all updates via ThinVantage System-Update and all Win7 Updates from Microsoft. I don't know whether there is maybe a driver missing for the W500 Expresscard-slot for Win7 64bit? The eSATA expansion cards are both listed as Win7 compatible. Has anybody successfully used the W500 with an eSATA Expresscard under Win7 64bit? Thanks for your help.

    I am currently using this eSATA ExpressCard: http://intrl.startech.com/product/ECESAT32-2-Port-SATA-6-Gbps-ExpressCard-eSATA-Controller-CardCopy speed for 462 File(s) or 7'672'800'154 bytes is 127 seconds on SATA2 Disks, good enough for me.Win7-64 running on Thinkpad W701 model 4323CTO. Got some issues with Western Digital SATA3 (6GB) disks to be resolved yet. For my external USB3 SuperSpeed enclosures I am using:http://intrl.startech.com/product/ECUSB3S2-2-Port-ExpressCard-SuperSpeed-USB-3-Card-Adapter...and this single drive enclosure (so far the best I have found and seen).http://intrl.startech.com/product/SAT3510BU3-35in-SuperSpeed-USB-3-SATA-External-Hard-Drive-Enclosure-with-Fan You can shop all that at www.compatible.eu. Critical is the ExpressCard interface, Gen1 or Gen2.Trying to find out what ExpressCard Interface is used in a Thinkpad W701 model 4323.Anyone knows more?  

  • HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK

    my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since  2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the software is not found by software on the network.Why ı am not able reinstall it again.But so intresting it is possible install it using win7 64bits drivers.İf ı install it by these drivers ı can not use all funtions of the printer.I want use orginal software for installing it on my computer and to use all faciliies.I tried all possibilities for windows part .Delete all drivers from pc,registry part but no solution. ı would like find a solution.ıs it possible any problem windows part if it is. what kind of problem and solution.Please give me a help...

    HI DeePure, 
    Print out the supplies status page, and let me know if all the colors print correctly?
    Do you have an extra set of cartridges we can use to troubleshoot with?
    Print the supplies status page
    Follow these steps to print out the supplies status page from your printer.
    On the Printer’s control panel, press the Setup button.
    Press the down arrow to highlight Reports , and then press OK .
    Press the down arrow  to highlight Supplies Status Page , and then press OK .
    Figure 1: Supplies Status Page
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

    This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
    Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
    Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

    Hey donovanjj,
    Thanks for the question. Let’s try to recreate your SC Info folder:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    If the above does not resolve your issue, you may want to look over the following resources:
    iTunes 11 for Windows: If you have trouble burning a disc
    http://support.apple.com/kb/PH12349
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thanks,
    Matt M.

  • HP C309 G AIO can't install in Windows 7 64bit  running under BootCamp

    HP C309 G Printer wont install in Windows 7 64bit running under BootCamp on a new iMac
    Just bought a new iMac. Installed HP C309 all in one without incident on the Mac side. I am also running Windows 7 on iMac through a program called Bootcamp. When I boot to Windows 7 and try to install the newly downloaded software for windows 7 from the HP site, it begins to load then stops, giving me two error messages. They are both essentially the same except one says software and the other says hardware. The software one says: This computer does not have the necessary USB software support to allow completion of a USB installation. The printer plugs directly into the monitor in one of four usb ports. All the usb ports work on the system when using Windows 7. I have other devices working and plugged into the usb ports while in Windows 7. It is almost like the printer software is unable to find the usb software or hardware. Any ideas

    Well, you have a full Window's 7 install so you would really have to go to HP and/or Microsoft to see what is going on. Bootcamp basically is only involved with "booting" and just installs Apple product drivers and such. Just treat the Window's side as if you are using it on a "normal" Window's PC. (As far as problems, crash's, updates, or any other Windows, HP, etc, problems you may have.)
    "Installed HP C309 all in one without incident on the Mac side."
    So,,, that means the printer "works" (prints) on the Mac or the installer just worked? Make sure the Printer actually prints in the Mac side as you may have a dead USB port on the Printer. It happens.
    If your HP works fine (prints) in the Apple environment you know it's not the USB ports on either the printer or the computer.
    You said you already downloaded the newer versions, have you tried using the drivers on the install disk and then update them to the newer ones? Also if you haven't yet, make sure the drivers are for the 64bit version, just a thought.
    That's about all my brain cells have so good luck.......

  • Is there any way to install Win7 64bit onto a partition

    Is there any way to install Win7 64bit onto a partition from a Win7 CD? I have tried bootcamp several times and it won't work. I am running a late 2011 MBP 500gb hd, 2.7ghz i7

    Bootcamp is saying no USB device connected.

  • FireFox starts in the task manager, but there is no desktop FireFox window. This occurs in safe mode also. Re-installing does not fix. Using FF 3.6.6 on win7/64bit

    FireFox starts in the task manager, but there is no dektop FireFox window. This occurs in safe mode also. Re-installing does not fix. Using FF 3.6.6 on win7/64bit
    == This happened ==
    Every time Firefox opened
    == When 3.6.4 auto upgraded to 3.6.6 . ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.86 Safari/533.4

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Maybe you are looking for