Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?

Hi,
Can DPM 2012 SP1 be installed onto Server 2012 R2? i.e. is it compatible and also is it supported by Microsoft?
If so are there any official documents or links provided by Microsoft for this installation scenario?
I would have installed DPM 2012 R2 onto Server 2012 R2 but this is not possible due to DPM 2012 R2 not supporting Server 2008 protected servers!
Thanks,
Microsoft Partner

Hi,
DPM 2012 SP1 is not supported running on Windows server 2012 R2.
System requirements for System Center 2012 SP1 - DPM
http://technet.microsoft.com/en-us/library/jj651645.aspx
Can you tell me how many Windows 2008 servers you need to protect and what is preventing you from upgrading them to Windows 2008 R2 ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

SCCM 2012 SP1 + WSUS + Server 2012 + SQL Server 2012

Hi all;
I installed SCCM 2012 with Sp1 for my site server and everything is going well.. And than i installed the WSUS role on my Windows Server 2012 and SCCM 2012 SP1 it gave an error message which is "Fatal Error: The schema version of the database is from a newer
version of WSUS than currently installed. You must either patch your WSUS server to at least that version or drop the database." My database server is SQL Server 2012... Do you know any pathc for WSUS or SQL Server 2012 doesnt support WSUS yet???
Thank You...
MCT

Normally if you are going to install SCCM 2012 SP1 +Windows 2012 with SQL 2012, Then you better use the SQL 2012 sp1.
also when you are installing the WSUS version 6.2 which come with server 2012 make sure you leave the default settings as it is. it shows in the below article.
also when you are giving the path to save the WSUS contents make sure the drive you going to create the wsus folder and the place where you going to download the updates is having free disk space and its formatted with the NTFS volume. Also the service account
you are using for this configuration should have the admin rights to the location of the wsus folder you going to create,
Thanks
Hasitha

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Hyper-V host server upgrade from Server 2008 R2 Enterprise SP1 to Server 2012 R2 Datacentre

We are about to upgrade our Hyper-V host servers from Server 2008R2 Enterprise SP1 to Server 2012 R2 Datacentre to take advantage of the latest Hyper-V features.
This only concerns the host servers and not the guest VMs running on the hosts (they will be upgraded next year).
This is what is running on our host servers:
Host 1
File,print & issuing CA server
Exchange 2010
SharePoint 2010
Quickbooks server
Domain controller 1
Offline CRL CA
Host 2
SQL 2008
Forefront TMG 2010
Domain Controller 2
Windows 7 client
With this is mind, I have drafted a rough action plan as follows:
Create a list of all file locations for VM memory, snapshots, virtual memory and Hyper-V config files
Document all existing system settings
Gather server information, download drivers, RAID controller and other boot drivers & firmware updates (in case the in-place upgrade fails)
Test all software media
Copy all VMs onto external data storage (NAS drive)
As part of the upgrade process we will redistribute some hard drive space i.e.
expand them to their new sizes and verify the data integrity of copied VMs by powering up each VM in a test environment
Wipe and adjust the sizes of the host partitions to accommodate the expanded VMs
Perform an in-place upgrade to Server 2012 R2 Datacenter
Check EV, services etc
Change the default locations for VM memory, snapshots, virtual memory and Hyper-V config files
Upgrade Anti-virus and other system software
Test the system
Are there any glaring omissions? Does anyone have any tips they can give me?

Hi Marco,
always do a fresh Installation of your hyper-V Hosts, you could end up doing a lot of Troubleshooting with Drivers,Addons etc.. new Installation ist way faster.
Depending if you have a Cluster or Standalone Servers there are different ways to do it.
When you have installed your 2012 R2 Hyper-V Server you just can Import the VMs from the new Location.
As far as i know VMs with snapshots are not supported, so you have to remove them before doing that move and commit the changes to the vhd files, the VM need to be offline on 2008R2 to do that.
You do not Need to Export the VMs on 2008R2, just copy it, normaly you should have all Files of a VM in one Folder.
A working Backup is always your friend on such Tasks.
When the VMs are running on Hyper-V 2012R2 do not forget to Update the Integration Services.
Make Sure your Servers Hardware are still supported with 2012R2, see Server Catalog and Support Matrix of the Vendor.
And last one, where possible and supported convert the VHDs to VHDx Disks, after testing the first boot of the VM.
Udo

How to install Sticky Notes in Windows Server 2012 R2

I want to install Sticky Note in Windows Server 2012 R2. If this app is not available in Server 2012 then which is the
best "Sticky Note" application for this platform.
Thanks

Here are instructions for 2008 -
http://www.win2008r2workstation.com/sticky-notes/ I'm not sure about the legality of that, as I think Microsoft has some rules in their license about copying files from one distribution to another. You would need a lawyer to check on that.
Otherwise, a simple Bing search will turn up freeware apps you can download.
.:|:.:|:. tim

SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?

Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

How to install sp2 for sql server 2012 , where sql server 2012 instnce is installed in cluster mode

Hi Everyone,
I want to install sp2 for sql server 2012, My sql server 2012 instance is installed in cluster mode.
Please suggest the best practice to install sp2 , what are prerequisite and recommendation.
Please share installation guide for sp2 in cluster instance, if any one have.
Thanks All
Aditya

Did you searched a bit before posting question.
Please read
https://support.microsoft.com/kb/958734?wa=wsignin1.0
http://blogs.msdn.com/b/john_daskalakis/archive/2014/09/05/how-to-install-a-service-pack-at-a-sql-server-2012-failover-instance-best-practices.aspx
http://blogs.msdn.com/b/jason_howell/archive/2012/08/28/how-to-patch-sql-server-2012-setup-with-an-updated-setup-package-using-updatesource-to-get-a-smart-setup.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I can not install Waik and mdt on server 2012 so that i can deploy windows 7 please may you help me?

i can not install Waik and mdt on server 2012 so that i can deploy windows 7 on target machine, i have downloaded mdt Waik i got error saying you must install frame 2.0 which needs also adk windows 8. i am using hyper machine.
thank you

Hi Warsame12,
It is worth mentioning that don’t use IPV6 PXE, Windows 7 doesn’t support WDS 2012 deployment over IPv6 PXE. If IPv6 PXE boot is enabled and a
Windows 7 installation is selected, a blank screen will appear and Setup will not run.
The related KB:
Windows 7 client deployment over IPv6 PXE network boot does not work.
http://support.microsoft.com/kb/2803741
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installation error....fresh install on a fresh clean server 2012...

Hi,
I am installing Exchange 2013, a fresh install on a fresh clean server 2012, but after copying the files, it says "Setup is preparing the necessary resources before......" and then it gives the error message as shown below:
"Exchange server is in an inconsistent state. Only disaster recovery mode is available. Please use Setup/m:RecoverServer to recover this Exchange server.".
In addition in the ExchangeSetup.log file, I see the following at the bottom of the file:
"[10/09/2013 16:52:55.0448] [0] Setup is determining what organization-level operations to perform.
[10/09/2013 16:52:55.0448] [0] Setup has detected a missing value. Setup is adding the value PrepareDomain.
[10/09/2013 16:52:55.0448] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[10/09/2013 16:52:55.0448] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[10/09/2013 16:52:55.0495] [0] InstallModeDataHandler has 9 DataHandlers
[10/09/2013 16:52:55.0495] [0] RootDataHandler has 1 DataHandlers
[10/09/2013 16:52:55.0588] [0] [ERROR] The Exchange Server is in an inconsistent state. Only disaster recovery mode is available. Please use Setup /m:RecoverServer to recover this Exchange server.
[10/09/2013 16:53:17.0182] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[10/09/2013 16:53:17.0182] [0] End of Setup
[10/09/2013 16:53:17.0182] [0] **********************************************"
Any idea what is causing this? Any help is appreciated. Thank you.

I just wanted to add a thank you as well to this post. I was installing a fresh copy of server 2012 with exchange 2013 CU3 (fresh install) and was getting this exact error message. What i had done to cause this is not deleting the computer AD account
prior to setting up another server with the same host name. I deleted the AD account and setup the serve 2012 installation again using that "exchange" hostname i wanted to keep. and then ran the Exchange 2013 CU3 installer again and it worked. The problem
was i didnt remove my existing exchange server properly. Thanks for the answer in this post it steered me in the right direction.

Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?

Hi,
I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
Thanks
K

The most current CU version os SCOM 2012R2 is CU4
You can download it from
https://support.microsoft.com/kb/2906925?wa=wsignin1.0
For detail description of SCOM 2012 R2 CU4, you may refer to
http://support.microsoft.com/kb/2992020
and
http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
Roger

Need help installing sql server 2012 on windows server 2012 core

Hi Guys
I am having trouble installing sql server 2012 on windows server 2012 core. I am doing this on VM and my VM is not connected to internet.
This setup is part of preparing lab for sql serve exam 70-462. I would really appreciate your help.
I am including the links to the log files that were generated after installation. There are following 2 files
Component Update and
Detail_Global_Rules
Thanks

Hi
iworkonline,
Regarding to your original question, you can work around it according to Prashanth’s post or unclick the “Include SQL Server Product Updates" checkbox when installing SQL Server on your VM.
Regarding to your second question, I make a test using TechNet Virtual Lab and everything works as expected . Below are my steps.
1. Choose Web client after laughing the Lab.
2. Choose SQLONE machine and “OPEN CHARMS” as follows, then search SQL Server Management Studio, use it to connect to the default instance (which has been installed in the lab).
From your description, you get error message “Device not ready”. Could you please post more details? Are you installing SQL Server 2012 on the TechNet Virtual Lab?
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

SQL 2012 SP1 and SCCM 2012 SP1

Hi,
I am installing SCCM 2012 SP1 with SQL 2012 SP1 in Stand-Alone mode. But I am receiving error:"the service broker endpoint cannot listen on port 4022 because it is in use by another process"
I saw in SQL (SQL Server Configuration Manager) that I am using port 4022 without dinamic port.
Thaks.
Lessandro Zampieri - http://lezampieri.com

Thanks for the reply.
C:\>netstat -ano
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 780
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:4022 0.0.0.0:0 LISTENING 4664
TCP 0.0.0.0:5985 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING 528
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING 836
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING 900
TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING 624
TCP 0.0.0.0:49156 0.0.0.0:0 LISTENING 624
TCP 0.0.0.0:49217 0.0.0.0:0 LISTENING 616
TCP 0.0.0.0:49219 0.0.0.0:0 LISTENING 4184
TCP 0.0.0.0:49389 0.0.0.0:0 LISTENING 2056
TCP 0.0.0.0:49627 0.0.0.0:0 LISTENING 5060
TCP 127.0.0.1:49390 0.0.0.0:0 LISTENING 2056
TCP 127.0.0.1:49628 0.0.0.0:0 LISTENING 5060
TCP 127.0.0.1:57593 0.0.0.0:0 LISTENING 4664
TCP 192.168.100.30:139 0.0.0.0:0 LISTENING 4
TCP 192.168.100.30:445 192.168.100.20:49420 ESTABLISHED 4
TCP 192.168.100.30:445 192.168.100.20:49421 ESTABLISHED 4
TCP 192.168.100.30:445 192.168.100.20:49422 ESTABLISHED 4
TCP 192.168.100.30:445 192.168.100.20:49423 ESTABLISHED 4
TCP 192.168.100.30:4022 192.168.100.30:61430 ESTABLISHED 4664
TCP 192.168.100.30:4022 192.168.100.30:61496 ESTABLISHED 4664
TCP 192.168.100.30:49627 192.168.100.40:55914 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55915 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55921 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55922 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55926 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55927 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55928 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55929 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55930 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55967 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55992 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55998 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56001 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56002 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56009 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56077 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56211 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56656 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56687 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56817 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56891 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56946 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56959 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57027 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57072 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57223 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57240 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57248 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57268 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57292 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57293 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57294 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57311 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57312 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57314 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57320 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57340 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57342 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57343 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57369 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57372 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57379 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57385 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57386 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57387 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57388 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57389 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57390 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57391 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57392 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57393 ESTABLISHED 5060
TCP 192.168.100.30:61430 192.168.100.30:4022 ESTABLISHED 4112
TCP 192.168.100.30:61496 192.168.100.30:4022 ESTABLISHED 4112
TCP 192.168.100.30:61537 192.168.100.10:49158 TIME_WAIT 0
TCP [::]:80 [::]:0 LISTENING 4
TCP [::]:135 [::]:0 LISTENING 780
TCP [::]:443 [::]:0 LISTENING 4
TCP [::]:445 [::]:0 LISTENING 4
TCP [::]:4022 [::]:0 LISTENING 4664
TCP [::]:5985 [::]:0 LISTENING 4
TCP [::]:47001 [::]:0 LISTENING 4
TCP [::]:49152 [::]:0 LISTENING 528
TCP [::]:49153 [::]:0 LISTENING 836
TCP [::]:49154 [::]:0 LISTENING 900
TCP [::]:49155 [::]:0 LISTENING 624
TCP [::]:49156 [::]:0 LISTENING 624
TCP [::]:49217 [::]:0 LISTENING 616
TCP [::]:49219 [::]:0 LISTENING 4184
TCP [::]:49389 [::]:0 LISTENING 2056
TCP [::]:49627 [::]:0 LISTENING 5060
TCP [::1]:49390 [::]:0 LISTENING 2056
TCP [::1]:49628 [::]:0 LISTENING 5060
TCP [::1]:57593 [::]:0 LISTENING 4664
UDP 0.0.0.0:123 *:* 948
UDP 0.0.0.0:500 *:* 900
UDP 0.0.0.0:1434 *:* 3000
UDP 0.0.0.0:4500 *:* 900
UDP 0.0.0.0:5355 *:* 124
UDP 127.0.0.1:51181 *:* 4132
UDP 127.0.0.1:51338 *:* 124
UDP 127.0.0.1:55475 *:* 900
UDP 127.0.0.1:59835 *:* 1628
UDP 127.0.0.1:60840 *:* 3596
UDP 127.0.0.1:62010 *:* 1816
UDP 127.0.0.1:62390 *:* 4112
UDP 127.0.0.1:64129 *:* 624
UDP 192.168.100.30:137 *:* 4
UDP 192.168.100.30:138 *:* 4
UDP [::]:123 *:* 948
UDP [::]:500 *:* 900
UDP [::]:1434 *:* 3000
UDP [::]:4500 *:* 900
All things are correct?
Att.,
Lessandro Zampieri - http://lezampieri.com

Can't install DPM agent for Windows Server 2003

Hi,
We have DPM 2012 backup server.i try to install DPM Agent on Windows server 2003 PC. but installation failed.below error are Occured.
Install protection agent on (serverName.domain name) failed:
Error 347: An error occurred when the agent operation attempted to create the DPM Agent Coordinator service on (serverName.domain name).
Error details: %1 is not a valid Win32 application
Recommended action: Verify that the Agent Coordinator service on(serverName.domain name) is responding, if it is present. Review the error details, take the appropriate action, and then retry the agent operation.
HOW CAN SORTED OUT FOLLOWING ISSURE
Thanks,
Gayan

Hi,
The below blog outlines the needed steps for protecting
Windows Server 2003 computers using Data Protection Manager 2012 R2.
http://blogs.technet.com/b/dpm/archive/2014/06/11/details-on-protecting-windows-server-2003-computers-using-data-protection-manager-2012-r2.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Deploy scom 2012 r2 on server 2012 r2

Going to deploy scom 2012 r2 on server 2012 r2 with sql 2012 sp1. a few questions before starting:
1. roles placement: server1 - management server, operation console;
                             server2: database server, reporting server;
                             Not sure where to place web console - server1 or server2?
2. what are the least privileges to have for the installation account - domain user with local administrators?
    should the servers' system account need to be member of local administrators?
3. what about other SCOM specific accounts? what least privileges they need?
Thanks in advance.

1. You can place it on the 1st server. do note however the downside doing all in one box SCOM components.
2. It would be best to use a domain user account with local admin rights on the box
3. Its all in the SCOM deployment docs..
You might want to check this link
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/opsmgr-2012-r2-quickstart-deployment-guide.aspx (same as
Blake Mengotto)
Hope this helps.
Thanks,

Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?

Similar Messages

Maybe you are looking for