Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

Hi All,
Has anyone been able to install DSEE 7 on Windows 2008 R2 SP1 64-bit? Is it supported?
I followed the instructions and when run the command (as the Administrator) below nothing happen, it simply return an empty command prompt. Ms VC 2008 Redistributables (the one that come with the archive) is installed.
dsccsetup.exe war-file-create
dsccsetp.exe ads-create
When run the same command using the same archive on Windows 7 64-bit it does prompt for further input or report error.
Any suggestions or help would be much appreciated.
Shane L

Windows 2008 R2 is not listed as a supported OS in the release notes.
http://docs.oracle.com/cd/E19424-01/820-4805/820-4805.pdf
It lists:
Microsoft Windows Server 2008 Standard Edition for x86 and x64 Service Pack 1
Microsoft Windows Server 2008 Enterprise Edition for x86 and x64 Service Pack 1
If you are able to go to the next version, it is listed as supported in the release notes for ODSEE 11g:
http://www.oracle.com/technetwork/middleware/downloads/odsee-11gr1certmatrix-161592.xls
I have not tried 11g on 2008 R2 myself, but if it is in the certification matrix, it should work.
Hope that helps,
Eric

Similar Messages

Installing Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services

Hi All,
Is it possible to install Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services. We are planning to use xenapp to publish these application.
Please let me know if this is a supported environment.
Regards
Radhika

As far as I know you will NOT be able to access OpenGL functionality through Terminal Services. as the OpenGL implementation provided in that environment is software, version 1.1 - not GPU-accelerated.
I seem to recall there was a thread about a year ago here where someone was trying to do what you are asking. I vaguely remember they were able to make it work, but I'm not sure. You might try doing a search of this forum.
-Noel

Installing Dirsync on Windows 2008 Server Standard FE

Hello all,
I need to Dirsync my only domain controller i have to Office 365. My server is a Windows 2008 Server Standard FE. I installed all requirement for dirsync to be installed (and all Windows updates also) and i still get an error when trying to install
(Says my Powershell is not at least 2.0, but it is...)
Anyone tried to install Dirsync on that kind of server ? (and made it work?)
Regards,

It is
required to update to Windows Management Framework 3.0 or Powershell 3.0 if you are installing DirSync on Windows 2008 R2. I believe the same applies to 2008 SP1 as well.
Also, I've heard of issues where non-English versions don't properly detect the presence of PowerShell. You may want to temporarily change your regional format to English to test this, if this applies to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Windows 2008 R2 SP1 Windows update not applicable

HELP!!! We have 3 Windows 2008 R2 servers that were updated with SP1 back in March. Last month we noticed on our Retina audit that the three servers were missing several Windows critical patches that were released after SP1 was applied. WSUS did not report
any missing patches for those three servers. When we tried to manually apply those missing patches we get the error message "This update is not applicable to your computer". After some troubleshooting we found that KB976932 (Service Pact 1) is not listed in
installed updates. However, system property shows Windows 2008 R2 SP1 Enterprise Edition. We are certain that SP1 did NOT come pre-installed. Microsoft Baseline Security Analyzer detected no missing patches. Microsoft System Readiness Tool CBA logs show no
errors. Ran SFC /SCANNOW and found no error also. Force install of the patches with command switch /wuforce, did not work we still get the same message patch not applicable. We compared our servers that are fully patched running Windows 2008 R2 SP1 against
the three unpatched servers and found several dll and sys file's version to be different. Those dll and sys files are also the files that would have been updated by the critical patches. The only thing different between the fully patched Windows 2008 R2 SP1
servers and the unpatch are the unpatch have no public internet access. We confirmed patches that were required prior to SP1 push are installed: KB2454826 KB2534366 KB2533552 KB976902 Confirmed: Partition with Windows 2008 R2 SP1 installed is set to "ACTIVE"
Windows Event Collector service is started Windows Modules Installer is started Uninstalling SP1 is not possible because the KB976932 is not listed and verified "not hidden" in installed updates list. Rebuilding the three servers are the very last option,
since they are critical. Other than the missing patches.... the servers are running great, we have no reported issues with the three servers. Attempt to reinstall SP1 failed after reboot, error 0X800F0826. If anyone has experience this problem and know of
a solution please help.

Hi,
I would like to confirm that what updates are not applicable for your three Windows Server 2008 R2 SP1 servers?
Based on the current situation, please run the System Update Readiness Tool as Meinolf Weber mentioned and check the CheckSUR.persist.log for the corrupted
files. After that, please refer to the following Microsoft TechNet article for how to repair them.
Advanced guidelines for diagnosing and fixing servicing corruption
http://technet.microsoft.com/en-us/library/ee619779(WS.10).aspx
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hyper-v for windows 2008 r2 sp1

i have windows 2008 r2 sp1 foundation. i thought if i download and install the hyperv from the microsoft download site, it might make my server on par with the features of the windows 2008 r2 standard version, but i might be wrong, because it apparently
does not let me upgrade during setup but force me to do clean install. which implies that i might be overwriting my whole server with just a hyper v functionality and nothing else, am i correct? i dont want that. i want the whole server functionality like
iis sharepoint etc. if i dont have hyper v, i can live with having vmware player.

Hi Lenny,
Please ensure that the downloaded server is Windows Server 2008 R2 Standard not core or other edition .
Also please refer to following article :
http://blogs.technet.com/b/uspartner_ts2team/archive/2013/08/20/how-do-i-upgrade-my-windows-server-2008-r2-foundation-to-windows-server-2008-r2-standard.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2008 R2 SP1

Hi
SBS 2011 std.
Is it OK to install windows 2008 R2 SP1? It appears in Windows Update. Can it be done remotely?
Thanks
Regards

Hi Yahya,
Yes, Windows Server 2008 R2 SP1 can be installed on SBS 2011 Standard, you can also refer to this article:
Windows Server 2008 R2 SP1 Should Be Installed On SBS 2011
To manage the windows update, I also recommend you can deploy through WSUS and Group Policy.
If you have downloaded the service pack as .msu file, and if you want to install this file remotely via Windos Powershell, please use powershell remoting and the cmd 'wusa.exe':
Installing Standalone Windows Update .MSU Packages
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Windows 2008 R2 SP1 Enterprise TS Sessions stuck in Down state

I have an environment of 30 physical Windows 2008 R2 SP1 Enterprise servers providing Remote Desktop services running Citrix XenApp 6.5. Over the last 2 months, I've had two instances where one user session was stuck in a "Down" state. The user
could not log in or reconnect to the published app because this one session could not be cleared. I was forced to remove the affected server from the published app, clear off all the users, and reboot in order to clear the Down session.
Research brought me to the following KB articles:
http://support.citrix.com/article/CTX128192
http://support.microsoft.com/kb/2383928
I attempted to apply the hotfix, but it was "not applicable to your computer". I opened a ticked with MS and the conclusion was that the hotfix, and subsequent versions of the hotfix, have been superseded by Windows Updates. The hotfix apparently has
been rolled into public Windows Updates.
My problem is that this behavior still exists. Has anyone else experienced this and is there a nondestructive method (without rebooting) for clearing out these sessions stuck in a "Down" state? Thanks.

OK. We sent the files over to Microsoft to check on this issue. They came back with the following information.
While we are usually skeptical of Hotfixes, several of these descriptions are on the money. We will not complete the entire list, but will start with the exact match descriptions and apply one at a time.
<<<<<Microsoft Engineers response>>>>>>>>>>>>>>>>>>
We looked at the MSDT data and found the version of “win32k.sys” is old.
Module[ 2] [C:\WINDOWS\SYSTEM32\WIN32K.SYS]
  Company Name:      Microsoft Corporation
File Description: Multi-User Win32 Driver
Product Version:   (6.1:7601.17860)
File Version:      (6.1:7601.17860)
We advise you to install the following hotfix to update Win32k.sys to the latest version.
2661332 You cannot reestablish a Remote Desktop Services session to a Windows Server 2008 R2-based server
http://support.microsoft.com/kb/2661332/EN-US
Also, I checked that these are not installed on the machine, please install the following hotfixes as they update all the components to their latest versions and we have seen similar cases in the past which were resolved after these hotfixes were installed.
2383928 Remote desktop sessions do not completely exit, and you cannot establish new remote desktop sessions to a computer that is running Windows Server 2008 R2
http://support.microsoft.com/default.aspx?scid=kb%3bEN-US%3b2383928
979530 A Windows Server 2008 R2-based Remote Desktop server denies some connection requests randomly under heavy logon or logoff conditions
http://support.microsoft.com/default.aspx?scid=kb;EN-US;979530
2578159 The logon process stops responding in Windows Server 2008 R2 or in Windows 7
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2578159
2465772 An application or service that uses Winsock API or Winsock Kernel API may randomly stop responding in Windows Server 2008 R2 or in Windows 7
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2465772
2265716 A computer that is running Windows Server 2008 R2 or Windows 7 stops responding randomly
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2265716
975777 There is a delay when you shut down, restart, or log off a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/default.aspx?scid=kb;EN-US;975777
2505348 High CPU usage or a lengthy startup process occurs during WMI repository verification when a large WMI repository exists in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2505348
<<<<<<<<<<<<<End response>>>>>>>>>>>>>>>>>>

LSASS.exe utilizing 3 GB of RAM on Windows 2008 R2 SP1 - MS Dynamics AX 2012 application server (it's not a DC)

Hi guys,
Does anyone know why would lsass.exe be using 3 GB of RAM on an application server with 8 GB of RAM in total running on Windows 2008 R2 SP1? Is this something I should log with Microsoft support?
Thanks
Zoran

Hi we experienced the same issue. but im not able to reproduce it on the second server.
We got two member servers both in the same configuration Windows 2008R2 SP1 STD hosting Axapta AOS. the first server is experiencing the Lssas memory leak (we got a little bit more memory then you but it consumes 5,6GB form 6GB
total RAM) the second one not. both servers are VM hosted on hyper-v 2012 cluster. the only difference betwean them is instaled Avast Antivirus, but we have a testing environment (single VM server with identical deployment with Avast also installed) and
it does not seems that the Avast is the cause.
can anybody please point us how to troubleshoot lsass memory leaks on member servers not DCs, becouse the event logs does not show anything interesting about the couse, but are full of errors about what i see as consequences of low memory condition.
Thanks in advance Martin Stejskal

TS130 Crash - HyperV - Windows 2008 R2 SP1

Hello,
Sry for my english. Im from germany.
We have a ts130 server with hyper-v windows 2008 r2 sp1 with two windows 2008 r2 sp1 vm's. We have 4 x 4 GB ram. The server run for the last 3 month, after complete new installation, without any problems, then the server crashes every day one time, without any information why. No image on scree, no reaction num key. We must do a hardreset...The onboard raid controller do a completed repair and review till 100% after starting windows and everything is fine. We become two new HDD's and we replace it. The server run 2 weeks and then crash, same problem. after every crash the onboard raid controller do a completed repair and review. Then lenovo replace the mainboard and the power unit with bios update, but the last 2 days, the server crash again one time a day.I dont know what we should do. Can anyone help us?
Peter

Hi, I have the same problem as you have.
Currently, I have Centos 6 installed with VirtualBox, but I have had this problem with other Ubuntus and Windows. After a while, sometimes 2 weeks, sometimes 2 hours, the system stop without showing any info on the screen and no reaction on keyboard (Bloq Num) as Cordial said. We have to do a hard reset and there is nothing in the linux logs, it only stops working.
I've try with soft raid, hardware raid, no raid, different HDDs, different OS, virtualization with VBox, KVM, VMWare VSphere, no virtualization, different RAM modules from different brands, a new power supply, changing BIOS options, ... Nothing solve the problem.
The integrated network card even blocked my switch when the server crash, so i start using a PCI one and disabled the integrated in the BIOS. The problem with the switch disapeared, but not the crash. At least other computers on the switch are working.
I've been trying to put this server in production for more than a year, but it's impossible.
Could somebody help with that? I've no idea what to do now.

Office 2013 and Windows 2008 R2 SP1 AD RMS

Hi All,
I have installed Windows 2008 R2 SP1 AD RMS service, and it works well with Office 2010/2007, does not however work with office 2013, below is the error I get:
sorry, something went wrong opening information rights management protected content. the request is not supported
I have added the AD RMS cluster URL and the AD RMS licensing URL to the loacl Intranet security zone (http://realercheng.wordpress.com/2013/01/23/office-2013-failed-to-create-and-consume-protected-content-with-connect-to-digital-rights-mangement-services-and-get-template/),
however, I still get the same error.
Does Office 2013 work with Windows 2008 AD RMS, and if it does what is the issue here and how do I go about sort it?
KimaniBob

Hi,
Im am using server 2008 r2 sp1 and users are using windows 7 enterprise, office 2010 pro. plus. They can see right policy
template with office 2010.
But now I have installed office 2013 pro. plus and added new admx files to new gpo for office 2013 also enabled this policy
"Enter Permission Policy Default Server for Quick Access Toolbar" and this is writing in the policy \\serverhostname But I cant receiving ad rms templates from my outlook?
Is server 2008 r2 sp1 ad rms compatible with office 2013 or am I have to install server 2012 ad rms for office 2013?
How can I fix this problem?
Thanks.

BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
Thanks

We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

OBIEE install problem on Windows 2008 R2 64bit server

Hi!
I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
I follow these documentations:
Oracle® Fusion Middleware
Installation Guide for Oracle Business Intelligence
11g Release 1 (11.1.1)
E10539-01
and
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
Then from JRockIT installed WLS_1035 generic.
Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
Tests I have done,
Install loopback adapter
Deinstall loopback
Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
Verified that we have static ip on the server
Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
And checked the installer logs everytime, no errors, no warning.
Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
Best regards,
Anders

Hi!
It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
Best regards,
Anders

Unable to Install OBIEE on Windows 2008 Server R2

I am Unable to Install OBIEE on Windows 2008 Server R2. It is giving the error
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But is there any patch to install the OBIEE on Windows 2008 Server R2

Hi Sk
I think it might be due to compatible issue.So check the properties of the install.exe file and change the compatability to windowsxp or windows 2003 ,then try to install .I think its going to work.Because i installed OBIEE10.1.3.4 on windows server 2008.
Regards
Sandy

Installing Printers from Windows 2008 R2 printer server using the Cname

Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error. this is the message am getting...
Printer Installation Failed
You do not have enough privilege to complete the printer installation on the local machine.
I found this KB and did exactly what is in the KB but stilll....
lhttp://support.microsoft.com/kb/870911/en-us
need help

Hi.
I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
Windows 2008 server R2 64-bit
HKLM\SYSTEM\CurrentControlSet\Control\Print
= ”DnsOnWire” = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
= DisableStrictNameChecking = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\
REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Windows 2008 server x86
HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\ REG_SZ = OptionalNames = “aliasname”
(C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Don't forget to reboot your system after these changes!
Best Regards, Mats

Static DNS record deleted automatically- Windows 2008 R2 SP1

Hi,
I have scoured the Interweb and tried all suggestions to no avail for this one. Here's the scenario:
My client has a Windows 2008 R2 SP1 (Windows 2003 domain/forest functional level) server which is a DC and DNS server. The problem is that a DNS record for an Exchange 2010 server is getting deleted every 10 or 40 minutes. This started occurring for no obvious
reason a few weeks ago. The impact is that users cannot connect to Exchange (caching does not seem to help with this, which is odd). I disabled scavenging, which did not resolve the issue. I enabled auditing and found a 4662 event revealing that the domain
administrator account was deleting the server A record (and pointer record). Why this is happening is what I am trying to investigate next: possible bug? The zone is configured as non secure- maybe making it securing it would help? But this does not explain
why the record is being deleted. There is no NIC teaming implemented, which I understand can cause issues.
As an interim measure I created a script employing dnscmd that recreates the record every 15 minutes, which works for the most part, but not always, which is why I added a deny permission on the record for the domain Administrators group, seems so far to
have prevented the record from being deleted.
Any advise on the cause of this and how to investigate why the record is being deleted will be much appreciated!

Hi- thanks for that. However I have seen those links and already followed them: I turned off scavenging (default 7 day configuration) and the record still gets deleted (scavenging date is not due till a later data in any case). Also the record is static
so it would not get scavenged? The option to delete the record if stale is unchecked.
I already enabled auditing and identified event 4662, which identified that the domain administrator account that is deleting the record:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 8/01/2014 11:47:25 AM
Event ID: 4662
Task Category: Directory Service Access
Level: Information
Keywords: Audit Success
User: N/A
Computer: DC.domain.com.au
Description:
An operation was performed on an object.
Subject :
Security ID:
DOMAIN\administrator
Account Name:
administrator
Account Domain:
DOMAIN
Logon ID:
0x2e1b093
Object:
Object Server:
DS
Object Type:
dnsNode
Object Name:
DC=EXCHANGEHOST,DC=domain.com.au,CN=MicrosoftDNS,CN=System,DC=domain,DC=com,DC=au
Handle ID:
0x0
Operation:
Operation Type:
Object Access
Accesses:
Write Property
Access Mask:
0x20
Properties:
Write Property
{771727b1-31b8-4cdf-ae62-4fe39fadf89e}
{e0fa1e69-9b45-11d0-afdd-00c04fd930c9}
{d5eb2eb7-be4e-463b-a214-634a44d7392e}
{e0fa1e8c-9b45-11d0-afdd-00c04fd930c9}
Additional Information:
Parameter 1:
Parameter 2:
Please advise!
Thanks

Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

Similar Messages

Maybe you are looking for