Installing DSL software and administrative rights

I am trying to install my Verizon DSL software but it says I can't because I don't have system administrative rights. I am the administrator and I am logged into my account. It won't pull up the password box it just ends my installation. Is there a way to sign in with administrative rights before I click the installation button? Or a way to turn off the installation password box...so that I don't need it? I really need this installed

Hello icemice:
I suggest you call the Verizon technical support people - they should be able to address your issues. Offhand, I cannot see why you would be blocked from installing software.
Barry

Similar Messages

CS3 Mac I bought CS3 several years ago while in school, but had to drop out before I even opened the software. A few months ago I opened and installed the software and used Photoshop to complete a review project in preparation for my return to school. Thi

I bought CS3 several years ago while in school, but had to drop out before I even opened the software. A few months ago I opened and installed the software and used Photoshop to complete a review project in preparation for my return to school. This morning when I tried to open Photoshop again I got a message saying the license didn't support the software anymore and I would need to check with my IT administrator or contact Adobe. I tried calling Adobe but the recorded message said CS was not phone supported. I know it took me a long time to get back to school, but it seems sad to waste the $1,000 I spent on the software. Is there a solution to this issue or do I need to buy new software? Thank you for your help if you have any suggestions.

Error "Licensing has stopped working" | Mac OS
Mylenium

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

I can't install any softwares and any update to my Macbook Pro?

I can't install any softwares and any update to my Macbook Pro?
<Edited by Host>

ttlmdy,
which model MacBook Pro do you have?
What exactly happens when you try to run a software installation or a software update?

I went on Itunes to install new software and backup. I has been running all night and still saying preparing Iphone for restore. How long is this suppose to take?

I went on Itunes to install new software and backup. It has been running all night and still saying preparing Iphone for restore. How long is this suppose to take?

Preparing your iPhone for restore its supposed to be about 1-2 minutes! Do you see any errors the time you plug in the wire from your iPhone to iTunes?

TS3694 I just received the unknown software error (6) do you have a resolution for this issue? Occurred after install of software and firmware in the final validation phase. I have a 4S

I just received the unknown software error (6) do you have a resolution for this issue? Occurred after install of software and firmware in the final validation phase. I have a 4S

http://lmgtfy.com/?q=iPhone+error+code+6

I'm trying to install new software and my keychain asks for my password I put it in says its not right, gives me hint, same password it is the one I always use, so what do I do now?

I am trying to install new software on my Imac and my keychain asks for my password, I type it in, it says it is wrong, I do it again, wrong, it gives me a hint, same one I have been using, wrong again, so I cannot get the new soft ware to download, how do I get my passwork on the keychain to work or how do I change it?

What model iMac and what version of the Mac OS is installed? "About this Mac" from the Apple menu is a good place to start.

Installation and Administrative rights

If PPro CS5.5 is installed on a PC (actually Production Premium CS 5.5) and then administrative rights are taken away - how will this affect functionallity of the software? Our IT department is "standardizing" our laptops and they want to take away admin rights.

I guess that's about the most simple but yet most descriptive of an answer. I'm going to assume this applies to CS4 also. I can't wait to see their "answer" for this. This is the same bunch of knuckle heads that thought instead of getting a decent RAID on the editing PC, I could use network storage and a 10/100 connection.
Thanks for the info. I should have figured but then I never even considered of trying this in first place.

I think I have a virus - hard disk full and administrator rights gone

I think I have a virus - my hard disk is full allthough I only have about 20G of 60 used. I cant install a virus checker as I have lost my administrator rights (when I check in accounts, I am just a "standard" user. This means I cannot install any software as it will not let me run the installer program - says incorrect username / password

You may have a corrupted disk but you do not have a virus. Boot using your original system installation DVD and run Disk Utility. Repair the disk.
If you have no Administrator accounts at all, follow this procedure to create a new, temporary Administrator account from which you can fix your normal one.
Power on or restart your Mac.
At the chime or grey screen, hold ⌘ and S on your keyboard to enter single-user mode.
At the prompt, type
fsck -fy
and press Return.
This is a simple check for file system integrity and is optional. It will take a moment or two to complete. Wait for it to finish before proceeding.
Type the following exactly as written, one line at a time, each line followed by the return key. There is a single space preceding the first "slash" ( / ) character in each line:
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
When you restart the machine, it will take you through the entire setup and registration process all over again. When you do so, create a brand new account with Admin privileges. Give it a simple and disposable name since you will delete it later. Do not choose the option to transfer or migrate information to the Mac.
When it completes, log in under that new account, change your previous account back to Admin, and log out.
Log in using your old account, which will now have its Admin privileges restored. Delete the throwaway account you just created.

MSI Group Policy install failing because of administrator rights problem

I have succesfully installed the desktop manager software 4.6 on my PC using the MSI from the CD. I am a domain administrator, when I try to install the same MSI on other users in the domain through group policy who are not administrators the software will not install. I have checked and the policy is definately being applied and it says on logon that the Blackberry Desktop Manager software is being installed but no icon or program group is created.
I don't want to give users administrator rights as the users are not allowed to install software on their PC. Normally software installs through group policy without a problem. I don't want to have to go around to each PC and install manually if I can avoid it.
Any help would be most appreciated.
Solved!
Go to Solution.

Someone else would really need to answer this, but i have my own simple solution we use here.
Create a share file eg //138.218.137.22 etc etc for the user to go to. In here save a copy of the desktop manager. Get them to click and drag it to their desktop and install the file from there. (do not install the file directly from the shared drive)
Is the cd version won't work, get the install.exe from the blackberry site..
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Failure Notice when installing Adobe Reader 11 Administrator rights Win7

Have tried downloading ansd installing Adobe Reader 11 on my new Dell Vostro with Win 7 Pro. I am logged in as administrator but when I try to install Adobe Reader I keep getting a message that I do not possess the necessary administrator rights. Any suggestions? I've tried downloading and installing with both IE and Firefox and have checked that Java is enabled. I also checked that I am definately logged in as administrator. Any help would be appreciated.
Thanks
Ernesto

Try this
download the offline installer from http://get.adobe.com/reader/enterprise/ and save it to disk
right-click on the downloaded installer and select Run as Administrator

Outlook Connector 6.0 and Administrator rights

Hi all!
We want to use the Sun Java System Connector for Microsoft Outlook 6.0 with Windows 2000 with Outlook XP.
To install the generated exe file as an user, he needs admin right. Afterwards we take the administrator rights from the user away. Run the user outlook, it wants to send a problem problem report to Microsoft.
If the user has administrator right, everything functions.
Thanks for your help in advance.

Hi Jens!
To install the generated exe file as an user, he
needs admin right. Afterwards we take the
administrator rights from the user away. Run the user
outlook, it wants to send a problem problem report to
Microsoft.The solution is, to install connector.exe as local admin
an the machine. You can abort installation without providing
user information.
After that you can install connector.exe as
user without administrative rights.
So you need two install turns.
Regards,
Erik

DVD drive not recognised after initial install of software and drivers - Server 2012 R2

Hi
I have a SATA DVDRW drive that isnt being recognised by windows server
It is recognised in bios, and was initially recognised by windows, until installing an AV on the server.
Looking under device manager, it can still be seen, but only as a hidden device (greyed out).
Both the C: drive and the DVD drive are set in IDE mode in the bios (believe that is just meaning they are sandalone, rather than RAID mode)
If the DVD drive is moved to another SATA port it is recognised by windows, however I want to keep these ports free, so i can use them to RAID my other HDDs as and when i get round to buying them.
System specs:
OS - Windows Server 2012 R2 with updates (Microsoft Dreamspark)
MB - ASUS M5A78L/M - USB3
RAM - 1x 4GB DDR3
DVD drive - SAMSUNG superwritemaster SH223L
Any help would be good :)
soz if this is in the wrong forum, just point me to the right one
Thanks
J
Hi guys - thanks for the responses.....
we just tried something simple - swapping the OS drive and the DVD drive over (DVD was in sata 5, OS in sata 6 - now the other way round)
This seems to have worked, so we are going to keep it that way round
Seems Silly yet simple
Thanks again

hi, so you say that the drive will work in another SATA port is there the potential that the SATA port you are currently using has a fault? does it work with any other hardware?
another option is a classic windows fault regarding the corrupt registry filters that would make a CD\DVD drive disappear in explorer, however i am not sure if this problem afflicts sever 2012. you could give it a go to see if it resolves the issue
Press the Windows logo key + R to open the Run dialog box.
Type regedit in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type
the password, or click Allow
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters
registry entry. To do this, go to step 7.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, go to the next resolution.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.

Installed snow leopard and the right click on my mouse no longer works. Any ideas?

I just replaced my hard drive and installed a clean copy snow leopard with all updates. The right mouse button (normal wired mouse that came with imac) with the menu drop down is no longer working. changed secondary button in mouse settings and got the right click menu but now when I right click the file or group of files are no longer highlighted. this *****. any ideas?? Between the hassle of replacing a hard drive, mouse problems, firefox, opera, office mac and elgato tv problems and issues im fed up.
Message was edited by: tele59

Apple menu -> System preferences -> Keyboard and Mouse should give you controls over the mouse. If not, either Steer Mouse or USB Overdrive might give you better control.

The field point 4.1 software does not get installed, how to install the software and work on field point 20xx

We want to know the basics of installation of field point s/w and where to start from after installation.
Then we also need the details of HOW TO WORK in it. what are the other hardware and software that are necessarily to be installed along with field point in the PC. How to connect the hardware fp2000, to the PC.
Actually we tried installing the field point s/w, but we did not get the field point explorer icon to continue working.

Hi.
You can find informations in the NI Developer Zone (Distributed I/O -Fieldpoint)
http://zone.ni.com/devzone/devzone.nsf/webcategories/67EFA8729F4A7741862567E1006EDA74
and here for the Basics:http://zone.ni.com/devzone/conceptd.nsf/webmain/2124F6BBD29663D886256CB80054DBD7
Configure your fieldpoint in MAX.

Installing DSL software and administrative rights

Similar Messages

Maybe you are looking for