Installing DW8 and DW CS3

I have some extensions that does not work with DW CS3, so I
would like to keep using DW 8, but I would like to get familiar
with DW CS3 also. How can I install both on the same machine
without messing up the extensions? I am Mac OSX.
Thanks in advance for your time.

I installed Dreamweaver CS3, updated it. Then I installed
Dreamweaver 8. They are both in different folders and so is their
own extension managers. Now when I open the extension manager for
DW8, I cannot see the Dreamweaver 8 in the 'Active Product'
drop-down box. When I select the mxp and have it open it with DW 8
Extension manager it says that I need to have DW MX or greater
installed. I have both installed, but no go.
Any insight on how you got both to work simultaneously
?

Similar Messages

Use DW8 and DW-CS3 on same machine

I have DW8, and bought CS3 upgrade (actually, Studio 8 to CS3
Web Standard).
I need to be able to keep DW8 as is, with all extensions.
Will installation of the CS3 upgrade screw up my current Studio 8
installation/configuration?

Tom:
If I use your first method listed, will I then be able to
install the
updated version of the extension?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Tom Muck" <[email protected]> wrote in
message
news:f08mvv$75o$[email protected]..
> You can run them side by side, but you cannot run
different extensions on
> both. There is only one Extension Manager cache, and it
contains info
> about one set of extensions.
>
> I wrote an article that details some problems with the
Extension Manager:
>
http://www.tom-muck.com/articles/ProperCareAndFeedingOfTheExtensionManager/
>
>
> --
> --
> Tom Muck
> co-author Dreamweaver MX 2004: The Complete Reference
>
http://www.tom-muck.com/
>
> Cartweaver Development Team
>
http://www.cartweaver.com
>
> Extending Knowledge Daily
>
http://www.communitymx.com/
>
>
> "timrand" <[email protected]> wrote in
message
> news:f06uet$qc9$[email protected]..
>>I have DW8, and bought CS3 upgrade (actually, Studio
8 to CS3 Web
>>Standard).
>>
>> I need to be able to keep DW8 as is, with all
extensions. Will
>> installation
>> of the CS3 upgrade screw up my current Studio 8
>> installation/configuration?
>>
>>
>>
>
>

Dw8 and fireworks CS3

hi everyone!
i d like to ask you if there is a problem in using
dreamweaver 8 + fireworks CS3.
Does these cooperate correctly?
Thanks!

They are not the same. DWCS3 is DW9.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pdimitri" <[email protected]> wrote in
message
news:f0agjl$e2i$[email protected]..
> hi everyone!
> i d like to ask you if the dreamweaver 8 and dw cs3 are
different
> versions.
> i ve already installed dw8 on my computer.
> i d like to download and print the documentation for dw8
but i only find
> the dw cs3 documentation here.
> do you know where can i find it?
>
> and something else
> what is the dreamweaver developer toolbox?
>
> Thanks!
>

Dw8 and dw CS3

hi everyone!
i d like to ask you if the dreamweaver 8 and dw cs3 are
different versions.
i ve already installed dw8 on my computer.
i d like to download and print the documentation for dw8 but
i only find
the dw cs3 documentation here.
do you know where can i find it?
and something else
what is the dreamweaver developer toolbox?
Thanks!

They are not the same. DWCS3 is DW9.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pdimitri" <[email protected]> wrote in
message
news:f0agjl$e2i$[email protected]..
> hi everyone!
> i d like to ask you if the dreamweaver 8 and dw cs3 are
different
> versions.
> i ve already installed dw8 on my computer.
> i d like to download and print the documentation for dw8
but i only find
> the dw cs3 documentation here.
> do you know where can i find it?
>
> and something else
> what is the dreamweaver developer toolbox?
>
> Thanks!
>

Installing CS4 and keeping InDesign CS3

Can I install CS4 without removing InDesign CS3? I need to keep both on my computer. is there a trick to this? Also, if I decide to remove CS4 later from my computer and move it elsewhere, can I uninstall it without imperilling InDesign CS3?

You can install CS4 and keep CS3. Just remember that IF these are upgrades, you cannot use CS4 and CS3 on different computers simultaneously. They are for the use of a single person. Technically, your upgrade license for CS4 supersedes you license for CS3. You no longer have a license for CS3 anymore. I doubt Adobe objects to you using CS4 and CS3 on the same computer. You can remove CS4 on a computer and put in on a new machine. A commercial license allows the non-simultaneous use on two computers. You probably can turn on the old computer when you have an occasional job that requires CS3.

Lightroom and PS CS3 Installation Order

I have a new PC on the way.
Is there a preferred order in which I should install LR and PS CS3:
Thanks,
Doug

It doesn't matter. They are completely independent.

Director 11 and flash cs3 editing

Hi,
Since the last version of director, i worked fine with it and
the feature of flash editing from director (you know, double click
in flash member and the flash movie opens from director. Then you
can update from flash in one only click).
Well, now i've installed dir11 and flash cs3 (without
uninstall dir10 and flash8, because i know that flash 8 doesn't
work with dir11, so I'm looked for profiting this feature with the
old dir10 and flash8 and dir11 and flashCS3). Ok, this feature
doesn't work anymore. When i try to edit from dir11, flash CS3
opens the SWF file!!!!. The same occurs with dir10 and flash8!!
After this, i've tried all possibles combinations,
uninstalling flash8 and reinstalling flashCS3, and the same with
directors. Finally, i found that the versions of macromedia
products doesn't uninstall completely, (even after removing
manually all the registry references of both products). When i
uninstall dir10 and then i install dir11, the .dir files is not
associated with director anymore(even with the rebootings), the
system ask to me the proper application. The .dir icons are white.
To solve this, i need reinstall dir10 and the icons back. Then, i
reinstall dir11 and the icons change properly.
All this adventure with director versions is just the same
with Flash 8 and CS3, with one big difference. Now i'm unable to
install CS3 properly to edit from dir11. All that i get is the SWF
editing but not the fla, and the .fla icons disappears. Not
associated anymore.
I've tried with the CS3 cleaning tool from adobe and
reinstalling applications, and no success. So, i think that maybe
the problem can solve doing a complete clean uninstall of
macromedia programs, but at this time i don't find the way to do
it.
I little help is needed, please...
Thks.

quote:
Originally posted by:
wherold
Flash is NOT automatically added in the Editor list
two things.
1. you must setup external editor for flash in D11
Edit -> Preferences -> Editors..
2. you'll have to add the source fla for every swf in the
proprty inspector by hand.
you can find this handling also in the D11 live docs at
http://help.adobe.com/en_US/Director/11.0/help.html?content=10_Using_Flash_Interactive_005 .html#70861
Wolfgang
Thanks, i know this. But this is not the problem. The
external editor (flash cs3) is located by director, and the path of
the fla file is correct. Director finds the file but opens the
swf!!, but the fla.

I bought a new iMac and want to install my copy of CS3 on it. Currently, I have photoshop only load

I bought a new iMac and want to install my copy of CS3 on it. Currently, I have photoshop only loaded on an older G4. After installing the discs I tried to enter the serial number and an alert said the serial was already used. I did have CS3 loaded on a 2007 imac but after the harddrive died it is no longer installed. Can you help?
Allen

to reset your activation count, contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

Problems installing Illustrator and Indesign from CS3 suite

I am trying to install Illustrator and Indesign from CS3 suite. Previously I had been running a trial version on my Mac, and now am trying to install the suite from the original install discs. I have gone through the process of uninstalling all of the Adobe programs and then reinstalling. When the install disc loads up and I get to the point where it lists the programs to install, in the top box Illustrator and Indesign are listed as already being installed and have no option to install them. When I search my computer there are no Illustrator or Indesign applications. I am able to reinstall the rest of the suite and it seems to work fine but can't seem to figure out what step I'm missing as far as reinstalling Illustrator and Indesign are concerned.

I haven't tried doing it on Vista but I would recommend looking for
Adobe clean up programs. The problem I had was that the computer had
a trial version and then I tried to install the full version and it
wouldn't let me install illustrator because there were some random
illustrator files that conflicted with the installation process. I
ran clean up program and it removed all adobe files. Then I
reinstalled photoshop. Before you start running clean up programs
make sure you back everything up. Good luck

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Installing new OS and Adobe CS3

Hello,
I have an old Powermac G3 with a Power PC G4 400MHz processor installed and 512 MB memory.
I would like to install Mac OSX10.4(Its currently running 10.3.9) and Adobe CS3.
Will it have enough memory to install these?
If not, how much memory can I install?
The memory is in the form of 4X 128MB memory at the moment.
Any help appreciated.
Angela

What size hard drive do you have & how much free space?
Tiger install DVDs are in short supply. Tiger is no longer available from Apple. For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray). Expect to pay (possibly a lot) more than the Apple list price of $129.
Also check this web store http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521
Possible Alternative - OS X Tiger 10.4 Upgrade DVD $74.95
http://www.yourmacstore.com/shop/shopexd.asp?id=376&bc=no
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
 Cheers, Tom

Installing a copy of CS3 on a new computer - without CD copy?

Hello,
Just purchases a new 2012 iMac - however two troubles i do not have the original CS3 copy of the CD (due to house fire) also the iMac does not come with a cd/dvd drive. I am wanting to install Design Standards CS3 on my new iMac.
I am also interested in updating to CS6 - read about the offer that expires before dec 31, 2012.
I am excited to start designing on my new computer and would love some support on how to download CS3 / maybe update to CS6.
I have installed one copy of this product on my laptop before.
Please let me know,
Thank you
Jenna

thank you for the link, however it is not working.
what is the price if i were to upgrade to CS6?
thank you, jenna
Date: Sun, 16 Dec 2012 00:49:37 -0700
From: [email protected]
To: [email protected]
Subject: Re: installing a copy of CS3 on a new computer - without CD copy? installing a copy of CS3 on a new computer - without CD copy?
    Re: installing a copy of CS3 on a new computer - without CD copy?
    created by JairajMike in Downloading, Installing, Setting Up - View the full discussion
Hi Jenna,     You can download the trial versions from this below URL and use your serial number to activate it.. http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here. html Read the instructions before starting the download.
However, I'm afraid if CS3 is compatible on your new iMac. Adobe has not tested CS3 on New iMac. If it doesn't you can upgrade to CS6 within 31st of December, 2012. Regards,Jairaj
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4924740#4924740
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: installing a copy of CS3 on a new computer - without CD copy?
To unsubscribe from this thread, please visit the message page at Re: installing a copy of CS3 on a new computer - without CD copy?. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to insta

I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

I have installed photoshop elements 13 on my computer, I have window7. It says this computer does not support this. I have had it on here and it worked i had to un install it and re install now it will not work??

I have photoshop elements 13, It did open up till I had to un install it and re install it, now it is says I need windows 7 or later and I do have windows 7. Can you please help me?

uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Installing DW8 and DW CS3

Similar Messages

Maybe you are looking for