Installing ECC6 EHP4 ready - Oracle Client extraction
Hi,
I am installing an ECC6 EHP4 ready system.
Our server has multuple systems running on the server with Oracle Database and oracle client is already available.
During instalation, sapinst always tries to extract Oracle client and we dont want this, so we always rename the OCL10264.SAR file to OCL10264.SAR.OLD or something like that and the sapinst step fails.
Then we just modify the keydb.xml file and make the step - OK.
I dont see this option now with ECC6+EHP4 installation.
The Keydb.xml looks different too.
Does anyone know how I can ignore this step and continue with this new release?
Even though I see a lot of improvements in SAPINST with the new release, it would be bad if this step or any other step cannot be ignored anymore.
Please suggest
Suhail
Problem solved....during the initial stages of the installation while it gathers all information, it checks and makes sure that the client software is available but doesnt extract it....i made it available and the installation went ahead....it extract it later before the database installation and at that time I removed it and when the installation failed, I was able to modify the keydb.xml file.
Regards
Cyrus
Similar Messages
-
ECC6 EHP4 Ready NetWeaver 701, XML file
HI Guys, I just finished installing ERP6.0 Netweaver EHP1 on HPUX and Oracle 10 g database. I want to upgrade the EHP4 components and my problem is Solution Manager is 4.0.
I am sure you have seen this tread many times, please ignore my ignorance, I am just lost reading so many treads in this regards.
How do I generate the XML file needed for EHP4 on solman 4.0?
Regards and many thanks.
KHi,
> 1. One thing that I did, I did not include IS-oil and IS_UT stacks. Would this cause any issue?
What ever package you want to upgrade in your system should be included in the xml file.
> 2. EHP installer is not able to connect to solman to fetch the xml file. I have to move the file to another directory. Should it be >EPS/in or any other directory like /tmp will work?
This file should present in download directory which you have defined.
> 3. Since I have installed EHP4 ready system, can I use sapinst to install the EHP4? I do not find ehp installer friendly at all?
>
There is no way in sapinst that you can upgrade your existing system. You have to use ehpi tool only to upgrade add-on's. This tool is very good if you have read the upgrade book carefully.
Thanks
Sunny -
Install Project Connect on Oracle Client 9i
Do you know anyone how install MS PROJECT CONNECT on client 9.0.1.1.1 and OS WinXP?
Exist other version MS PROJECT CONNECT, than 2.5.1, which requires Client 8?
Thanks
Milan
[email protected]Oracle has release Project Connect 3.0 which is WEB based application. You don't need a client installation.
This product is compatible with Oracle Projects Family Pack I and J, and with Microsoft Project 2000 and 2002.
Dina -
Where to running SQL Scripts after install of ODAC for Oracle Client?
I just installed ODAC for Oracle Client on a windows server, that runs a sql server database, for developers to connect a web app to an Oracle/Unix database. The install states to run SQL scripts located in the $ORACLE_HOME\ASP.NET\SQL directory after the install. I'm not sure where to run them? On the ORACLE DB on the Unix server? If someone could bring me up to speed I would appreciate it. Thanks.
If I do run the scripts, do you know what user they should be run as? The developer are using ASP.NET for connectivity.
Why there is no Oracle Expert answer this simple question? ?
After ODAC 11.1.0.7.20 installation completed, there is a message in the last screen:
*"Run the SQL script located in c:\app\Administrator\product\11.1.0\client_1\ASP.NET\SQL directory for a new installation or an upgrade of Oracle Providers for ASP.NET"*
The question is: How to run these 9 SQL scripts ?
In SQL*Plus, which oracle user should I connect to in order to run these 9 scrips, including:
InstallAllOracleASPNETProviders.sql
InstallOracleASPNETCommon.sql
InstallOracleMembership.sql
InstallOraclePersonalization.sql
InstallOracleProfile.sql
InstallOracleRoles.sql
InstallOracleSessionState.sql
InstallOracleSiteMap.sql
InstallOracleWebEvents.sql -
Ecc6 ehp4 ready sr1 installation with MSCS
hi.. i have been trying this past 2 days, to install the ecc on windows 2008, with db2 9.5 fp 5, but always failing during the execution of the db2mscs command, what i notice during the execution, the resources moved to node2 and DB2PRD-0 resources failed. authorization check ok and im using domain admin to install
anybody could help me on this ?
i notice the error on the debug file :
DB2MSCS_configure_FCM_address fnc_entry ...
DB2MSCS_configure_FCM_address non-fatal_err trace_point 10
91 00 0f 87 u2018 u2021
DB2MSCS_configure_FCM_address fnc_errcode 1508
DB2MSCS_Migrate_DB2_Instance non-fatal_err trace_point 44
e4 05 00 00 ä
Cleanup_and_free_all_resources fnc_entry ...
Cleanup_all_DB2_resource fnc_entry ...
DB2MSCS_Offline_resource fnc_entry ...
DB2MSCS_Offline_resource fnc_retcode 0
Cleanup_all_DB2_resource fnc_retcode 0
Cleanup_all_GenericService_resource fnc_entry ...
Cleanup_all_GenericService_resource fnc_retcode 0Is this could be the reason ?
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 7/8/2010 11:22:24 PM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: db1erp.bitis.vn
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server db1erp$. The target name used was cifs/db2prd. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (BITIS.VN) is different from the client domain (BITIS.VN), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
<EventID Qualifiers="16384">4</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-08T16:22:24.000Z" />
<EventRecordID>39604</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>db1erp.bitis.vn</Computer>
<Security />
</System>
<EventData>
<Data Name="Server">db1erp$</Data>
<Data Name="TargetRealm">BITIS.VN</Data>
<Data Name="Targetname">cifs/db2prd</Data>
<Data Name="ClientRealm">BITIS.VN</Data>
<Binary>
</Binary>
</EventData>
</Event> -
Can we install oracle client 32 bit on Linux 64 bit
Can we install the 32 bit applications like the oracle client on to a database server 64 bit and linux os 64 bit ?
This question is two parts which I paraphrase as per my understanding; please correct me if I'm wrong:
1) Can you install 32-bit applications (like the oracle client) on to a 64-bit Linux OS?
Quick and correct answer is: Yes. Most distributions will include 32-bit libraries along with 64-bit libraries for just this purpose.
2) Can a 32-bit Oracle Client "connect" to a 64-bit Oracle Database server?
Yes.
So ultimately, you could install 64-bit Oracle Database on a 64-bit Linux OS, and then continue by installing the 32-bit Oracle Client on the same host (although I see no real reason for this), and then finally use the 32-bit Oracle Client to connect to the 64-bit instance running on the same host.
Hope this is helpful!
Eric -
hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bitHi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Oracle Client 10 silent install?
Is there any kind of 'silent install' option for the Oracle client 10 runtime? A way to pre-configure it and then just have it autoexecute on a users workstation and auto-install?
Hi,
<br>Read the doc Installing Oracle Components in Noninteractive Mode</br>
<br>Nicolas.</br> -
Installation of Oracle Client 32 bit on Windows 64 bit
Hi ,
I'm trying to install the 32 bit Oracle client (release 11.2.0) on a Windows server with 64 bit (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).
It's my understanding that this is supported and should work. However, the 64 bit Oracle client (release 11.2.0) is already installed on the server.
We need the 32 bit client since an older application requires this.
The GUI for the install of the client starts fine - but when the step "Finish installation" the GUI suddenly disappeares. The logfile of the installation ends
with
INFO: Setting the value for INSTALL_TYPE variable
INFO: Variable "INSTALL_TYPE" wird auf "InstantClient" festgelegt. Der Wert wurde von der Befehlszeile empfangen.
INFO: adding the variable oracle_install_NoMigration to command line args table
INFO: adding the variable oracle_install_RACInstall to command line args table
INFO: adding the variable oracle_install_WindowsSystemDirectory to command line args table
INFO: Update the State machine to STATE_INIT_SESSION
INFO: Creating & Initializing the Session Interface Manager
INFO: Calling OiicInstallAPISession's prepareForInstallOperations
INFO: Do the iterator execution till Summary
INFO: Initialisieren des Installationsbestands
INFO: Einrichten des Installationsbestands
I'm executing the installation as a local admin - I've tried the installation with setting the compatibility mode to Windows 2000. No success at all :-(
Did I get it wrong that ths 32 bit client is certified with this windows version? Does anybody have experience with the same situation?
Any help will be appreciated!
Rgds
JanAre you using separate ORACLE_BASE directories ?
Oracle&reg; Database
HTH
Srini -
32 Bit Oracle Client Libraries on a 64 Bit Machine
Hello,
I own a 32 bit application that is running on a 64 bit linux machine currently only installed with 64 bit oracle client libraries. I requested the administrator install the 32 bit client libraries so that my application can function and they tell me that it is not possible. They cited a Meta-Link article that I do not seem to have access to, but this doesn't seem right. Has anyone else ever installed 32 bit compatible client libraries on a 64 bit machine. Thanks
-Steve
(First Time Poster)On Linux (and this is only on Linux, not on Solaris and AIX !) if the OS is 64bit, only 64 bit Oracle is supported.
Check the Certify pages for Linux x86-64. This is in the critical notes :
"Linux x86-64, support on AMD64/EM64T and Intel Processor Chips that adhere to the x86-64 architecture with supported Linux releases. *Running Oracle 32-bit on AMD64/EM64T (64-bit OS) is not supported .*
Oracle 32-bit running on AMD64/EM64T with a 32-bit OS is supported, refer to platform Linux x86 for more information on product availability. "
Hemant K Chitale
http://hemantoracledba.blogspot.com
You can access certify at http://www.oracle.com/technology/support/metalink/index.html
Edited by: Hemant K Chitale on Sep 3, 2009 11:43 PM -
Oracle Client x86 on Windows 7 x64
Buenas,
No tuve problemas al instalar el Oracle Client de 64bits en mi windows 7, pero cuando configuraba el PL SQL Development me surgieron un error, como el PLSQL es de 32bit y el Oracle Client de 64 no me detectaba el Oracle_home x ende tampoco oci.dll.
La solucion seria instalar un Oracle Client de 32bit en Windows, pero cuando instalo me sale los siguientes errores:
- Incompatibilidad con el sistema operativo.
- Configuracion del Oracle Asistente.
Es decir la instalacion termina con errores.
Alguna solucion para esto.
Traslate Google:
Good,
I had no problems installing the 64-bit Oracle Client on my Windows 7, but when setting up the SQL PL Development came to me a mistake, as is PLSQL Oracle Client 32bit and 64 did not detect the ORACLE_HOME x thus not oci.dll .
The solution would be to install a 32bit Oracle Client on Windows, but when I install I get the following errors:
- Incompatible with the operating system.
- Oracle Configuration Wizard.
That is the installation terminates with errors.
Any solution for this.Solucion:
Editar C:\client\stage\prereq\client\refhost.xml
Y agregar:
<CERTIFIED_SYSTEMS>
<OPERATING_SYSTEM>
<! - Microsoft Windows 2000 ->
<version VALUE="5.0"/>
<SERVICE_PACK Value="1"/>
</ OPERATING_SYSTEM>
<OPERATING_SYSTEM>
<! - Microsoft Windows XP ->
<version VALUE="5.1"/>
<SERVICE_PACK Value="1"/>
</ OPERATING_SYSTEM>
<OPERATING_SYSTEM>
<! - Microsoft Windows 2003 ->
<version VALUE="5.2"/>
</ OPERATING_SYSTEMO>
<! - Microsoft Windows Vista ->
<OPERATING_SYSTEM>
<version VALUE="6.0"/>
</ OPERATING_SYSTEM>
*<! - Microsoft Windows 7 ->*
*<OPERATING_SYSTEM>*
*<version VALUE="6.1"/>*
*</ OPERATING_SYSTEM>*
</ CERTIFIED_SYSTEMS>
Y se soluciona cualquier error q pueda producir en la instalacion. -
Where can I get the client libraries I need for Oracle 8.1.7 for a RedHat 7.2 Apache/PHP 4.2.2 Installation
Stuart Amos wrote:
Is it possible to use the JDBC 2.0 drivers for BEA Weblogic server without installing any of the Oracle client libraries. In the documentation. In the installation guide for Oracle jDriver in states that a full client installation of Oracle is required. Is this referring to the 384 Meg download that Oracle provide ??. If it is does this mean that Oracle client licenses are required for the web server ??Our Oracle driver is based on the Oracle client libraries, and the Oracle infrastructure, such as the tnsnames.ora
file, and the Oracle error message files in the Oracle client installation. I do not know how/whether Oracle licenses
it's client libraries. However, the Oracle thin (all Java) driver is useable anywhere, with nothing extra to install. It is
also more reliable than any driver based on Oracle's native client libraries. I recommend you use it.
Joe -
Hi,
We are planning to run a CU&UC from a NUC ECC5.00 system to UC ECC6 Ehp4/NW 7.01 and need to check if this is supported.
I have trawled through OSS/SDN etc and cannot see anything to say that it is not, but an OSS message placed regarding the supportability said that this is not possible as "ECC6 EHP4 SR1 Media is available as UNICODE ONLY, so you
will not be able to perform 'normal' CU&UC using 'EHP4 ready"
There is a NUC 7.01 kernel available, so I am not sure what SAP mean by this??
Regards,
MarkHi 'Basis Team',
The original question was "We are planning to run a CU&UC from a NUC ECC5.00 system to UC ECC6 Ehp4/NW 7.01 and need to check if this is supported." is pretty clear I think.
What muddied the water is a reply from SAP to an OSS message placed asking the above question where they say that this is not possible as there are no NUC ABAP loads delivered after ECC6 SR3.
This reply goes against all SAP doco that we have read, and as you say, you have done the same CU&UC that we are tring to achieve.
BTW, which upgrade kit did you use? The Ecc6 Ehp4 Ready SRx one??
Cheers,
Mark -
Hi Friends,
We have different versions of databases 9i,10g,11g, etc. on unix and windows servers.
I want to install on my laptop oracle client that can access all oracle databases. Is it 11g client? or 10g client?
I have read something before that 10g client is more stable and compatible to all versions than 11g?
Is it still true today?
Thanks a lot
MsKCan you be a bit more specific about the exact database releases you're using? There is quite a lot of difference between an unpatched 9.0.1 database and a fully patched 9.2.0.8 database when it comes to client compatibility.
Metalink 207303.1 is the Client/ Server Compatibility Matrix.
An 11.2 client is compatible with an 11.2, 11.1, 10.2.0.2 or later patchset, and a 9.2.0.4 or higher patchset. It is not compatible with a 10.1 database
A 10.2 client is compatible with an 11.2, 11.1, 10.2, 10.1, or 9.2.0.4 or higher patchset
If you need to connect to a 9.0.1 databaes, you'd need to go all the way back to 9.2 (or 10.1) client which is no longer available on OTN.
Justin -
BizTalk 2013 R2 - Oracle client connectivity
In integration of BizTalk 2013 R2 with Oracle database
1) is there only any particular version client that BTS 2013 R2 supports.
2) Do I need to know what version of Oracle db client is using before I install oracle client - (should support BTS2013 r2)
3) For example, client has older version of Oracle Db say 8g and if I install Oracle client 11g will that work with my BTS2013 R2 ?
4) Is it mandatory to always install both 32 bit and 64 bit client ?
MBHPlease follow the below steps (worked for me):
1-
You can install it by running setup available in
ODAC1110720.zip which can be downloaded from oracle site.
2-
Install ODAC1110720 on the new OracleClient home.
3-
Click
Next on Welcome screen
4-
Keep selecting
Oracle Client 11.1.0.7.20 version to install
5-
Keep selecting
Oracle Client 11.1.0.7.20 version to install
6-
Select
D:\app as Oracle Base where Oracle Client is installed on your system and click
Next:
7-
Keep the default port and click
Next to proceed:
8-
Click
Exit on successful installation
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Maybe you are looking for
-
Downloads from iTunes are not going into my library
When I download songs and podcasts from iTunes on my iPhone they seem to download fine but they do not go into my library. Any ideas? All software is up to date.
-
Linking two ODS objects using a multiprovider
Hello Gurus, I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many. My questions would be.... 1)When the relationship is one to many can I set it up in the multiprovid
-
How to find iPod in setting on a 3G iPhone
I'm trying to watch a movie on net flick by connecting my phone to the tv using RCA I can't find. Tv seting under setting
-
Contacts and Calendar Server, Pointless?
Hello! MLS N00B here, not really much experience with ML Server. Only had it a few weeks, and the new Profile Managaer instead of WGM thing really messed me around, seems unstable and a little too new. Anyway. Todays discussion comes in the shape of
-
JMS Adapter (for DI) does not allow passing username and password to JMS connection
Post Author: PLed76 CA Forum: Data Integration JMS Adapter (for DI) does not allow passing username and password to JMS connection. It has those fields only for MSMQ. Our Production environment does not allow us to connect to JMS (we use Tibco EMS) a