Installing Elements 10.0 via disc

Hi! I just bought Adobe Photoshop Elements 10 via local shop. I have a mac book, and I have no idea how to install the program.
Please help me, what do I have to do?

Soffpotatis95 you will want to insert disc 3. It contains the installation software.

Similar Messages

How do I install elements 12 without my disc on a new computer?

I recently bought a new computer which does not have a disc drive. I need to install elements 12 on my new computer without the disc. I do have my product key. Any Suggestions?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to install elements 11 without a disc drive

Help, I bought photoshop elements 11 and no disc drive in my lap top, they told me at the shop that i would be able to install with just the serial number ???

Download the trial version and activate it with your serial.
Mylenium

I have installed elements 13 from a disc and the organizer recognizes version sets, but won't let me expand them. Is there a patch?

I have installed elements 1`3 from a disc and cannot expand a version set. Help?

This is PSE 13? If so, it's not a bug, it's a feature. The new adaptive grid view in the organizer, where you see the thumbnails edge-to-edge, doesn't do stacks or version sets. Press. Ctrl+D/Command+D to get back to the old detail view instead.

How to re-install Elements 11? [was:Disc wont load]

Can I download on line, and supply my serial number from the package I purchased?

Download Elements 11 from http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Follow the Very Important Instructions on that page first BEFORE you click the download links.
Install then enter your serial number to license it.

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and als

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work. I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

WhiteHouse Norm
This question is already being responded to in the following duplicate thread
Premier elements 11 keeps stopping
Please reply in the other thread which has a discussion in progress.
Thank you.
ATR

I have recently installed Elements 12 on my computer. I have mislaid my disc for Elements 8 and an told that I cannot uninstall that programme without the disc. Is there an alternative way or can you supply any necessary software?

How can I get rid of Elements 8 without the disc?

Hi Eric,
There is no need to uninstall Elements 8 if you have Elements 12 installed on your system. However, if
you still wish to uninstall Elements 8, you can do that from Program and Features in Windows and Applications
folder in case of a Mac. You do not require a disc to uninstall a program.
Thank you for posting on Adobe Forums.

Shared Technologies errors when re-installing Elements 10 from disc

What do I have to do to correct Shared Technologies errors when attempting to re-install Elements 10 from disc?

Hi LouEDG,
Please try renaming OOBE from this Location:
Windows:
C:\Program Files (x86)\Common Files\Adobe
Mac:
Library/Application Support/Adobe
Once done please try installing Elements 10 and it should work.
Regards,
Abhijit

Elements 9: trying to install adobe Photoshop Elements 9 but the disc just keeps ejecting.

trying to install adobe photoshop Elements 9 but the disc just keeps ejecting. Any ideas why? Do I need to uninstall the previous installation which is not working first? help please.

Try downloading the installer from
Download Photoshop Elements products | 9, 8, 7

Update Pages installed via disc

I currently have Pages 4.3 on my MBP (that is running Mavericks) that was installed on this MBP via an iWork '09 CD.
How do I update to the latest version of Page (and the other iWork apps for that matter?

When you say update are you referring to the latest versions for iWork '09? :
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
Or were you wanting to "upgrade" to Pages 5? [Caution: This is more of a downgrade].
Peter

I have instauled elements 12 from a disc when starting the program I got error 16 help please

I have just instauled elements 12 from a disc, when I opened the programe it told me there was an error 16 and I should uninstal then re-instal and try agan. I have followed these instruction and I am still getting error 16 after the second time of instalation. Could please advise as what I need to do to get the programe to work

if you mean exit code 16, you'll need to check your install log files, http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

How to Install Windows 7 Without the Disc

1a) Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
"Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
1b) Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
1c) Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
1d) Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
2) Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
Good luck.
Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
Direct link to Windows 7 USB/DVD Download tool.
<Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
EDITED by Frank on 8/28/2013
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ervis,
Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
The information in the document referred you to applies to several different "types" of installations;
Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
with the key erased or Xed out.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I have Elements 13 (I have the hard copy) installed on my iMac using Yosemite. I do all my iPhoto work on an external drive where I have copied my iPhoto Library, can I also install Elements 13 on my external harddrive or drag Elements 13 over from my iMa

I have Elements 13 (I have the hard copy) installed on my iMac using Yosemite. I do all my iPhoto work on an external drive where I have copied my iPhoto Library, can I also install Elements 13 on my external harddrive or drag Elements 13 over from my iMac so that I can do work with Elements 13 via the exteranl hard drive? Thanks tb

Yes you can store images on an external hard dive and have them referenced in Organizer. It’s best to export copies to separate folders/subfolders and that will ensure iPhoto does not get corrupted.
Alternatively you could continue to use iPhoto with the Elements Editor set up in the iPhoto prefs as your external editing app. Then there is no need to use Organizer and no need to duplicate your images.
You can then call up photos directly from iPhoto as normal with the additional option e.g.
Double-click on a thumbnail to edit in iPhoto editor.
Control (right) - click on a thumbnail to edit in the elements app.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html

Unable to install Elements 12 on Windows 8.1

When I try to install Elements 12 on Windows 8.1, the install fails. It says it needs DirectPlay, but according to Microsoft, that has been depricated. I'm caught in a vicious loop trying to get Elements 12 installed on my PC. What's up with that?

Sandeep,
I downloaded the file, but it will not open. It has a .dmg extension, and apparently I don't have the necessary app to unpack it.Help please.
Gary
From: Sandeep Singh <[email protected]>
To: Gary Tibbals <[email protected]>
Sent: Wednesday, February 25, 2015 11:17 AM
Subject: Unable to install Elements 12 on Windows 8.1
Unable to install Elements 12 on Windows 8.1
created by Sandeep Singh in Photoshop Elements - View the full discussionHi Gary , Thanks for posting on Adobe forums. Could you please share a screen shot of the error ?Are you trying to install from a Disc ?If Yes, please try to download and install Photoshop Elements from this link:Download Photoshop Elements products
13, 12, 11, 10 Regards,Sandeep If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7229289#7229289 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7229289#7229289 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can I install to G4 iBook via Target mode from a MacBook Pro?

Can I install to G4 iBook via Target mode from a MacBook Pro? I have a non functioning iBook DVD Drive but want to do a clean install. Can I use the FW/Target mode to install? If not what can I do to install w/o the OD not working?

was this a std size disc or a funky shape / small cd of some type?
you will have to pull the machine apart, pull the slot drive, & take all the brackets / slot cover off the front of it (where you put the disc in). you can they try pushing down on the mechanical works (holding the drive as it sits in the ibook & face into the slot where you would put the disc in).
otherwise, you will have to take the drive itself apart, usually taking all the screws off around the outside & pulling the metal cover off will get you in to where you can force or pull the disc out.

Installing Elements 10.0 via disc

Similar Messages

Maybe you are looking for