Installing Enterprise Manager 10g Grid Control Using an Existing Database

I want to install Enterprise Manager 10g Grid Control 10.2.0.3 using an existing database. This database is RAC 10.2.0.2. and I use it as Infrastructure Metadata Repository.
I is said in Oracle documentation that SYSMAN schema has to be dropped, thus Database console repository has to be dropped. As far as I understand after Grid Control installation I will not be able to use Database console for my RAC 10.2.0.2 Infrastructure Metadata Repository database. I will be able to use only Grid Control for this database.
Am I right? Could you give me any advice about Installing Enterprise Manager 10g Grid Control Using an Existing Database?
Thank you.

I am trying to install the OEM rel 2.0 on AIX 5L from the downloaded software zip files which are as below,
AIX_Grid_Control_full_10201_disk1.zip (656,766,406 bytes) (cksum - 2157028496)
AIX_Grid_Control_full_10201_disk2.zip (655,758,726 bytes) (cksum - 2350778444)
AIX_Grid_Control_full_10201_disk3.zip (641,760,716 bytes) (cksum - 2053607771)
AIX_Grid_Control_full_10201_disk4.zip (606,903,411 bytes) (cksum - 4162514797)
AIX_Grid_Control_full_10201_disk5.zip (576,555,758 bytes) (cksum - 3304661461)
AIX_Grid_Control_full_10201_disk6.zip (459,658,650 bytes) (cksum - 3120478203)
AIX_Grid_Control_full_10201_disk7.zip (311,903,435 bytes) (cksum - 2438252536)
AIX_Grid_Control_full_10201_disk8.zip (224,594,251 bytes) (cksum - 2618845234)
I am unable to locate the runInstaller in any of the disks 1- 8 ,can somebody help me on this. Thanks

Similar Messages

OEM 10g grid control using an existing database

Hello all,
Has anyone been successful in installing Enterprise Manager 10g Grid
Control (10.1.0.3) using and existing 10g (10.1.0.3) database?
10g grid control comes with 9.0.5.0 database for it repository. Since
this respository can not be update to 10.1.0.3, Oracle recommends using
and existing 10g database instead.
My installation goes 90% all the way before it fails. It fails at the
create repository point.
If any one has been successful, could you please share your success
with me.
Thanks,
Jake

Well, finally I did it! :)
The problem comes when you are trying to install OEM repository into existing 10g DB which used to be configured with a standalone Database Control. Dropping SYSMAN user is not enough!!! There are some leftovers which must be cleaned before running repository creation assistant:
drop user SYSMAN cascade;
drop user MGMT_VIEW cascade;
drop role MGMT_USER;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
That's all folks.

Oracle Enterprise Manager 10g Grid Control Release 5

Hi All,
Has anyone here already using Oracle Enterprise Manager 10g Grid Control Release 5? Currently we are using Release 2 of Oracle Enterprise Manager as a package upon installation of Oracle 10g. Curious about Release 5 I want to try it out in our Dev Environment. But before making any changes. I would like to ask guidance from you.
Upon installation does it needs Operating System Patches, Packages etc.? Currently we are using AIX 5L Based Systems (64-Bit) and 10g for Database. Is this a complete installation or Just an upgrade?
Regards,
Dexter

We are using 10.2.0.5 on windows.
10.2.0.5 is just an upgrade
How to install and upgrade on AIX?
http://www.oracle.com/technology/software/products/oem/htdocs/Grid_Control_10.2.0.5.0_AIX5L_readme.html
quick installation quide.
http://download.oracle.com/docs/cd/B19306_01/install.102/b28033.pdf
Hope that will help you.
Anil Malkai

Oracle Enterprise Manager 10g Grid Control Release 4 (10.2.0.4) HP_UNIX

Is there a date that the above would be available? I do see that it is ready for Windows, Linux, Solaris, HP_Itanium but not HP_UX PA_RISC. Any ideas?
Matthew

Below is what's available for download thru OTN. To ensure my question is clear, approximately when will the MICROSOFT WINDOWS version finally be released:
Enterprise Manager 10g Grid Control Release 1 (10.1.0.2)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Linux x86
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Solaris Operating System (SPARC) (32-bit)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP-UX
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for AIX5L Based Systems
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP Tru64 UNIX

Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Windows

Any new guestimates when product "Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for WINDOWS" will finally become available.
Thanks.

Below is what's available for download thru OTN. To ensure my question is clear, approximately when will the MICROSOFT WINDOWS version finally be released:
Enterprise Manager 10g Grid Control Release 1 (10.1.0.2)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Linux x86
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Solaris Operating System (SPARC) (32-bit)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP-UX
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for AIX5L Based Systems
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP Tru64 UNIX

Oracle Enterprise Manager 10g Grid Controlにアクセスできない

OS:Linux　Oracle:11.2 GridControl:10.2.0.1
VM上にGridControlをインストールしアクセスしてみましたが（http://192.168.0.1:4889/em）
ページが表示できないと出ます。。
リポジトリ用のDBは11gを使用しています。
GridControlはまだ詳しくないのですが、どのあたりを調査すれば宜しいでしょうか？
基本的な事で申し訳ありませんが、宜しくお願いいたします。

いつもお世話になっております。
Grid Control10.2.0.5のインストールまでは完了したのですが
やはりアクセスできません。。
[oracle@vm1 /]$ /u01/app/oracle/oem_home/oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.vm1
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 4623 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 4624 | Alive
OC4J | OC4J_EM | 4621 | Alive
OC4J | OC4J_EMPROV | 4622 | Alive
WebCache | WebCache | 4631 | Alive
WebCache | WebCacheAdmin | 4619 | Alive
コマンドで確認したところ、OMSは稼動しているように見えるのですが
http://vm1:4889/em　でアクセスすると
Forbidden
You don't have permission to access /em/console/home on this server.
Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at vm1 Port 4889
と表示されてしまいます。。
またOMAの起動が以下のように失敗してしまうのですが
これも関係あるでしょうか？
[oracle@vm1 ~]$ /u01/app/oracle/oem_home/agent10g/bin/emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
[oracle@vm1 ~]$ /u01/app/oracle/oem_home/agent10g/bin/emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ........................................................................................................................... failed.
OMAが起動していなくても、Girdへのアクセスは出来るのでは？？という認識なので。。
宜しくお願い致します。

Index Tuning Wizard in Enterprise Manager 10g Grid Control

Hi,
9i OEM has an Index Tuning Wizard. Does anyone know where is it located in 10g Enterprise Manager?
Thanks!
-Ranit.

10g has an SQL Access Advisor (for tuning related to indexes and Materialized views) that is accessible via the OEM GC Advisor Central Link.
Look to DB Targets - Select the DB - Select Advisor Central from the Related Links Section at the bottom - Select SQL Access Advisor.
HTH,
Tony

Enterprise Manager 10g Grid Control?

Hi,
I have one doubt regarding workflowserver.
I am using OWB 10g R1.
I installed workflow server 2.6.3 as per the instructions given in installation guide.
OEM OMS (oracle management service is not installed).
I am able to create process flows and able to execute those using OWB (client).
Now I want to shedule the process flows.
Do I need to install OEM 10g?
Or Is workflow server fulfills this requirement?
Could you please suggest me.
Thanks and regards
Gowtham Sen.

You can submit them as Database Jobs since it is running on Standalone
Ask and Check in the WorkFlow Forum for more WorkFlow stuff answers
Workflow

Disk 1 of Enterprise Manager 11g Grid Control not downloading correctly

Hello, I'm downloading Enterprise Manager 11g Grid Control.
The first disk, of three, does not download correctly:
GridControl_11.1.0.1.0_Linux_1of3.zip
On the web page, its size is listed to be around 1.3 GB.
However, when downloading, it thinks its actual file size is only around 643 MB.
So only that much gets downloaded.
But after downloading, this .zip file cannot be opened, it does not appear to a valid .zip file.
Please investigate and fix this.
Thanks
Eugene

Please check from edelivery.oracle.com . You need to unzip all the zips under one dir.

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

Managing multiple database in 10g enterprise manager without Grid control

Hi,
How do we manage multiple databases using oracle 10 g enterprise manager?.
Do we have any java console EM, so that we can add databases as in 9i EM?
Thanks and regards
Suresh HT

Grid Control is the replacement for 9i EM. Without GC, you'll have to manage each database using its database control which isn't good if you have many many databases.
On the client CD, there is a java console you can install which has some packs like change manager but this console is only there temporarily. My understanding is it's there for some features that haven't been added to GC.
HTH

Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) New!

Hi All,
I've been trying to download that software from oracle website for the last 2 days but the zip #1 is always corrupted. I tried from various PC / O/S and always have the same issue.
Anyone know where to download it from another website?
Thanks
Felix

Felix,
Are you referring to http://download.oracle.com/otn/linux/oem/1110/GridControl_11.1.0.1.0_Linux_1of3.zip file? If yes, I have downloaded/extracted the file with no issues (using IE7 and Firefox 3.6.17).
Size: 1.27 GB (1,371,325,446 bytes)
Size on disk: 1.28 GB (1,375,916,032 bytes)
Contains: 1,873 Files, 851 Folders
Thanks,
Hussein

Install EM 10g Grid Control on Solaris 10 x86

Hi all
I need to install Enterprise Manager 10g Grid Control Release 2 on Solaris 10 x86 platform.
I found out the following link where I can download the software:
http://www.oracle.com/technology/software/products/oem/index.html
Howerver it seems that there isn't any download for my platform. Does anybody know where can I find the software?
How can I configure EM Grid Control on that platform if I don't have the software. Does anybody know a manual installation and configuration method?
King regard and thank you
Aron

That means it is not yet available for 10.2, but it is for 10.1

Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0

I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
Raj

Actually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink.

Install enterprise manager in Windows Vista

Hello,
As I have read on Oracle documentation it isn't possible to install Enterprise Manager 10g Grid Control in Windows Vista. So is there any other similar component to remote managing a Database (this is running in Windows Server 2003).
Thanks a lot.
This is the error message;
Iniciando Oracle Universal Installer...
Comprobando requisitos de Installer...
Comprobando la versión del sistema operativo: debe ser 4.0, 5.0, 5.1 or 5.2 .
Real 6.0
Fallo <<<<
Saliendo de Oracle Universal Installer, no se ha encontrado el log de esta sesió
n en C:\Users\miguel\AppData\Local\Temp\OraInstall2009-01-23_11-03-01PM\installA
ctions2009-01-23_11-03-01PM.log
Pulse Intro para salir...
Edited by: user7134478 on 23-ene-2009 14:03

Its possible follow the RN
"Support of Enterprise Manager Grid Control Version 10.2.0.4 Installation on Windows 2008/Vista"
http://download.oracle.com/docs/cd/B16240_01/doc/doc.102/e10552/toc.htm

Installing Enterprise Manager 10g Grid Control Using an Existing Database

Similar Messages

Maybe you are looking for