Installing error, also on manual Install.
I have just updated to Mac OS 10.8.2 (Mountain lion) and updated all my CS6 Master collection and got the following errors in installing three of the products (error codes listed below):
Extension Manager 6.0.4 Update
Installation failed. Error Code: U44M1P7
Adobe Photoshop 13.0.3
Done with Errors. Error Code: U44M1P6
Adobe Illustrator CS6 Update (version 16.0.3)
Installation failed. Error Code: U44M1P7
Also as some people have suggested downloading the updtaes and manually updating them tried that and got these:
Adobe Illustrator CS6 Update (version 16.0.3)
Installation failed. Error Code: U44M2P7
Adobe Photoshop 13.0.3
Installation failed. Error Code: U44M2P7
Extension Manager 6.0.4 Update
Installation failed. Error Code: U44M2P7
Install the latest version of Adobe Application Manager from the below link :
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Go to http://www.adobe.com/downloads/updates and download the update that you are trying to install.
Similar Messages
-
how to run 3 job(a,b,c) parallel in unix shells script and after will complete d will start and we have to handle the error also
032ee1bf-8007-4d76-930e-f77ec0dc7e54 wrote:
how to run 3 job(a,b,c) parallel in unix shells script and after will complete d will start and we have to handle the error also
Please don't overwhelm us with so many details!
Just off the top of my head ... as a general approach ... something like
nohup proca
nohup procb
nohup procc
while (some condition checking that all three procs are still running ... maybe a ps -ef |grep )
do
sleep 2
done
procd
But, we'd really need to know what it is you are really trying to accomplish, instead of your pre-conceived solution. -
My desktop PC will not allow me to update Safari. I keep receiving the error message to install manually
Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling -
Just got my computer back today, can access all programs. Only issues are in iTunes, iTunes Store, Cloud and match.
Cannot, dowload or purchase anything either.
All help is appreciated!
MichelleRead the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/TS1277 - Shared folder issues with Store authorization. -
3.7.2 update App Store error (20) and manual download error.
I purchased 3.7 from App Store. App Store prompts to update to 3.7.2 but when I start the update I get errror "We could not complete your request. There was an error in the App Store. Please try again later. (20)"
I've tried several times over the past week with the same result.
Today I manually downloaded the admin update. But when I try to run it I get error "The version of Remote Desktop installed on this Mac must be updated through the Mac App Store."
Grrr. How can I resolve this?
Mavericks 10.9.2I have the same problem, I can't update mine, error 20.
You can try uninstalling ARD and then installing all again, this process will install the whole ARD updated.
You need to be sure you have the serial number (I think there is a serial for this one if you are in a company environment) -
Mozart-oz makepkg error; can build manually just fine
Grrr.... I am trying to get a PKGBUILD working for mozart-oz http://www.mozart-oz.org/ (oz is a programming language). I have successfully built the package by hand, however my PKGBUILD fails with the following error.
make boot-init.linked && \
/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib/p2t.sh < boot-init.linked > boot-init.ozt && \
rm -f boot-init.linked
gzip -d < /home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib/boot-ozc.ozt.gz > boot-ozc.ozt
make[4]: Entering directory `/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib'
/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib/ozc -z 9 -DSITE_PROPERTY -l Base=/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib/Base.ozf -b /home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib/ -c dp/URL.oz -o URL.ozf
make[4]: /home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib/ozc: Command not found
make[4]: *** [URL.ozf] Error 127
make[4]: Leaving directory `/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib'
make[3]: *** [boot-init.ozt] Error 2
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory `/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib'
make[2]: *** [bootstrap] Error 2
make[2]: Leaving directory `/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share/lib'
make[1]: *** [bootstrap] Error 1
make[1]: Leaving directory `/home/mbeisser/packages/mozart/src/mozart-1.3.2.20060615/share'
make: *** [bootstrap] Error 1
==> ERROR: Build Failed. Aborting...
PKGBUILD
# Contributer: Matt Beisser <beissemj(at)gmail(dot)com>
pkgname=mozart
pkgver=1.3.2.20060615
pkgrel=1.1
pkgdesc="A Compiler for the Oz Programing Language"
arch=('i686')
url="http://www.mozart-oz.org"
license=('X11 style')
depends=('bison' 'gcc' 'gmp' 'zlib' 'emacs')
install=
source=(http://www.mozart-oz.org/download/mozart-ftp/store/1.3.2-2006-06-15-tar/mozart-1.3.2.20060615-src.tar.gz
http://www.mozart-oz.org/download/mozart-ftp/store/1.3.2-2006-06-15-tar/mozart-1.3.2.20060615-std.tar.gz)
md5sums=('b84fb3932eca573e6b8d5d1b26379371'
'0daf6c873990bebdde550ec1fd70bdb6')
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr --disable-doc --with-stdlib=../$pkgname-$pkgver-std
make || return 1
install -m 755 $pkgname $startdir/pkg/usr/
After doing a bit of googling I found someone with a similar problem, and this is what was said. The problem is it obviously can't find ozc.
> And I checked the Makefile and Makefile.in, I found that in order to
> compile the source codes in this directory, I need an executable named
> "ozc". But the question is that in order to make this "ozc", I need "ozc"
> itself. It is just like a circle. How can I fix this problem?
Here is how one normally builds mozart from sources:
- fetch the sources into directory mozart
- optionally fetch the sources of mopzart-stdlib into directory mozart-stdlib
- create a sibling directory build
cd build
../mozart/configure --with-stdlib=../mozart-stdlib
make depend #this normally optional, but essential if you hack on the sources
make
make install
Now, one very important detail is that in the top directory "make"
actually invokes "make bootstrap". It is very important to remember
this distinction if you are ever tempted to invoke make manually from
a lower directory. In this case, you should always invoke "make
bootstrap" otherwise things won't work.
To answer your worry: how do
we get bootstrapped if we need the compiler in order to build the
compiler? The answer is that the sources contain a checked in version
of the Oz compiler (the boot compiler) stored using the text form of
the bytecode. We use it to compile the Oz sources, including the
sources of the compiler itself, thus obtaining a fresh build of a
production compiler (this is in fact how we can update the boot
compiler too).
Cheers,
Denys Duchier -
I understand the solution and it makes sense, I just don't understand how to make makepkg do it...To fix the build issue, add
options=('!makeflags')
to the PKGBUILD. This package has problems building on multi-thread or multi-core cpu. This is usually the case when you get this error message:
make[3]: *** Waiting for unfinished jobs.... -
App Store Sign In - Unknown Error - also no 3G at all.
I have just got an iPhone 5 - whenever I try to log in to the App Store, I carefully put in the correct password and I get a message which states "Could not sign in - An unknown error has occured".
I also can't seem to get any 3G access at all.
Any ideas?
LouHi Tom,
Thanks for that, but actually you can open a video clip with FCP "Open with ... FCP", have ben doing that for years, as well as import and dragging etc.
Still nor resolved issue, FCP opens, appears in
the tool bar, but no canvas, library etc etc, very weird.
Have uninstalled, re-installed, same problem. And have a stack of work to do.
**** it. -
My iPod Touch says it needs to be activated. I go to activate it using wifi and it comes up with Activation Error: this device is not registered as part of the iPod Developer Program. I'm not a memeber of that. I'm not even an developer, I'm 14. My iPod has worked normally for months now. Then I go to connect it to iTunes to reset it (I have checked and iI have the latest version) The computer recognises the iPod is connected Tand it charges but nothing appears up on iunes. It worked fine yesterday
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
Error while creating manual planned order in apo
Dear expert
While I am creating manual planned order i am getting error as message /sapapo/rrp251
Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
But while creating manual planned orders planned order are not getting generated I am using BLock planning with PPDS
Please help How to resolve it
Regards
VirenderHi
The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
Thanks
Amol -
E1200 router not working -- Error 3005 (and manual network not connecting)
I'm trying to set up a new E1200 N300 Monitor, and am not having any luck. Using the Cisco Connect program ends in an error during the "Validating connection" step every time, telling me:
Error: 3005
An HNAP call to the device failed because the HTTP connection was broken.
(If it's relevant, the serioal number, connection type, and IP address (WAN) all come up as "unknown" in the error details).
I am able to set up the router manually via the web browser access. I can name the wifi network, set up the security, and even see and authenticate to the network from my devices, however, no internet connection is available when connected. (The internet connection itself is good -- when I move the incoming cable from the router to the computer, I instantly have perfect access -- thus this post)
I've also tried all the basic steps of reset and restarting everything involved multiple times, but I always end with the same result -- 3005 error in the setup app, and then a manually-configured wifi network that appears to be working and can authenticate devices, but does not provide any internet connection.
I'm at a loss at this point -- does anyone here have any advice? Thanks a lot for your time and input.
-e.
Solved!
Go to Solution.What type of internet connection do you have?
Example:
PPPoe
Cable Modem
ADSL
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
Anchor tag error, also copy and pasting text comes up "null"
After the recent update I am receiving anchor tag errors telling me to start with an alphabetic letter, which I was. Also no longer lets me copy and paste text onto a page, instead it says "null". Any ideas on a fix ?
I don't see a closing </body> tag in your code. There's an opening tag, but no closing tag, hence unbalanced.
^_^ -
Error while creating Manual Service PO in Extended Classic Scenario
Hi Experts,
Extended Classic scenario (SRM 7.0 with ECC 6.0) While Creating Manual Service PO in SRM i am getting the below mentioned error messages. Can any one suggest what could be the problem.
Error Msgs:
1. Backend Error:In case of account assignment, please enter acc. assignment data for item
2. Backend Error:Purchase order still contains faulty items
Regards,
MohanHi,
Yes i given all CC and GL information properly in Purchase Order Document for Service.. Still finding the error for Service PO alone.
Pl do the needful
Regards,
Mohan -
Error handling and Manual Retry mechanism in BPEL
Hi Gurus,
We have a requirement that If any error occurs during BPEL process , We need to auto retry. if auto retry is not enough We need to manual retry and send the request message to Worklist for retry.
In our BPEL process We have CreateOrganization API provided which can not be rollback using compansation handlers. From Here I need to intiate the process using worklist if any error.
I dont know how to intiate the process from particular node. Please help me.
thanks,My process has 5 invoke activities
CreateOrganization
createFaxNumebr
CreateAddress
CreatePhone
CreatePhExt
In my process , the first 2 services gets success, 3rd one 'CreateAddress' fails due to DB connection is broken. I can not rollaback first 2. I want to retry 3 rd using worklist when DB connection is fixed. I dont know how to call CreateAddress partner link as Catchall branch is not in scope of 'CreateAddress' and resume the process to execute 4 and 5 services. -
Msg. error BK048 for manual cost allocation
Hi,
we got a warning message for manual cost allocation (KB15N), when posting this allocation just with a quantity and without an amount. We would like to post this allocation without amount and therefore need to change the message type from warning (W) to information (I), to do this posting.
When using transaction OBA5, there is just a fixed and not adjustable value for Standard with "W". Do you know any workarounds or how we can change this message type to do this posting?
Regards
FlorianHi Florian,
HAve you assigned users in OBA5?.
Go to OBMSG, for this particular Message number in the allowed message types, specify IWE etc. In the standard column specify I. Also you could check on check box "Switch Off" if you want to have the option of not seeing the message at all.
Now goto OBA5, against the message number, in the "Online" column , specify I or - (Switch Off) and do the same in the BAtchl column also.
Now you need too specify a user only if you want this change for specific users , if you want all the users to be able to post manual cost allocation then do not specify any user name.
Do tell me if it works.
Regards
Susan -
Error in process manual bank statement
Hi, all!!!
I am having a pontual problem about a process manual statement in order to record manual bank statements in the system using the transaction ff67.
Error message:
Bank account number not unique
Message no. FV005
Diagnosis
The bank account with the data
Bank key 00193309
Account number 42573
Account currency BRL
is entered into several house bank accounts in the house bank directory.
Procedure
Check your house bank directory.
I´ve checked all tables T012*
I did not find other house bank in the house bank directory with the same house bank account.Hi Ravi,
Can you please clarify my below doubt.
Your statement"Please note that the statement numbers must be unique for Bank Statements."
Here when we unable to give the statement number which is already available in system, how it is possible to give the unique for bank statements.
Apologies if any mistake in my question, as I am new to SAP.
Thanks,
Murthy
Maybe you are looking for
-
Is it possible to preorder apple watch in the UK?
wondering if it is possible to preorder the apple watch in the uk already?
-
Using Replacement Variables Without Filtering in a Query
I want to use a replacement variable for the posting period and for current fiscal week, but I do not want my query results to be filtered by these values. Instead, I just want to show a column with the fiscal period as a number and the current week
-
Wi-fi Connection seems to drop off!!!
Hi, Has anyone had the problem recently about their iphone(4) dropping connection. It is quite random and has been happening for past few days. It automatically goes to 3g connection, which i dont like at all!! please help someone. Regards, Aparna.
-
10.4.6 + InDesign CS2 = Total Disaster. PLEASE HELP.
After installing 10.4.6 my Adobe InDesign CS2 no longer works. It crashes every time I start it up. I've repaired permissions, cleared caches and troubleshooted the system fonts folder. No luck. PLEASE HELP. I'm missing deadlines, losing money and sw
-
How can disable the annoying "Install addons only from authors you trust" popup?
It gives no new information, but annoys me a lot. I know what I do and don't need warning poups, thank you, and would be the happyest if this browser had decent built-in features and would be useable without a cartload of addons, like Opera.