Installing error: "Microsoft. VC80.CRT. type="win32" "
A few days ago I tried to open iTunes only to be told there was Mediatoolbox.dll missing, this confused me because I don't mess around with the technicalities of programmes on my laptop ,so, from previous experience with iTunes I figured simply un-installing and re-installing would solve the issue like it does normally. However, when I now try to re-install it it comes up with this error message:
After clicking OK this error message appears:
If I press retry it's just a continuous cycle of this message appearing, if I click abort it cancels the entire install but if I click ignore it does finish installing and even says it has done so successfully. Although when I try to open iTunes it comes up with this error 2 message:
It was suggested in a discussion on here that I completely wipe off iTunes and it's applications using these instructions - Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support , which I have tried and failed to get anywhere with.
Going a little bit mad here, have tried numerous other things aswell, such as extracting files, but had no luck. Would greatly appreciate any help.
Try:
Troubleshooting issues with iTunes for Windows updates
Next. post in the iTunes for Windows forum
iTunes for Windows
Similar Messages
-
How do i fix this install error. Very fustrating.
Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.
-
Why I cant Install itunes in my windows 8? error appears and it says:
error microsoft. vc80.crt type="win32".version="8.0.50727.6195"
please healp meThese ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I've had itunes on my computer previously, but when I tried to update it, I was forced to uninstall it, then tried to reinstall and it keeps giving me this error:
microsoft.vc80.crt.type="win32".version="8.0.50727.6195".publickeytoken="1fc8b9a 1e18e3b".processorarchitecture="amd64"
I've tried uninstalling all the programs that come with it multiple times, and I don't know what to do now, please help!!!!Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Error microsoft. vc80.crt type="win32".version="8.0.50727.6195"
no puedo instalar el itune por este error:
error microsoft. vc80.crt type="win32".version="8.0.50727.6195"OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I had Itunes on my PC (Windows Vista, 64-bit) and it worked fine with my Ipod. I purchased an Ipod nano, and it was not recognized by Itunes and I was instructed to un-install and re-install. After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424.
I am also having trouble with Windows Updates, and receive the same error message: 80070424. Perhaps the 2 issues are related?
If anyone is able to help resolve the issue so I can successfully install Itunes, I would greatly appreciate it!I ran the sfc /scannow command, and yes the response was: Windows Resource Protection could not start with the repair service.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly
Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?
-
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195".publicKeyToken="x86"'. why??
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x80070422
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
Can someone please Help?I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Maybe you are looking for
-
Some contacts not displaying but are in call history and on Whats App
I think this happened after upgrading to iOS 6, but some contacts which were on my phone are no longer displaying in 'My Contacts' however when I type the number in manually they appear. They are also listed in my Whatsapp contacts so I know they are
-
Cannot find "Plug-ins" folder for Photoshop CS6 on my Mac.
I cannot find "Plug-ins" folder for Photoshop CS6 on my Mac. Path suppose to be Macintosh HD > Applications > Adobe Photoshop CS6 > Plug-Ins but that folder is missing. Any suggestion on how to find it?
-
I recently got an I phone 4s. So I updated to Lion on my macbook and the latest version of iphoto so I could use photostream. Initially iphoto worked fine. But now all of a sudden, when I open iphoto the events or individual photos simply show a blac
-
Image gallery approach for additional details and add to cart option?
With efficiency and minimalist downloads for smartphone users I would appreciate advice on a product image gallery. Currently I have an intro page and other simple information pages. My gallery pages ( four distinct pages for different leather goods)
-
my phone keeps popping up with it saying this device is already associated with an apple device, everytime I download or buy from Itunes. I can't even get my music onto my phone. When the new ios7 came out it messed with my phone and I had to reset a