Installing Essbase + Interactive Reporting

Hi
We would like to install Essbase and Interactive Reporting services on one Server. Is this possible?
Regards,
Néstor Boscán

Hi,
For development environment, I don't see where the concern is. This only means that you won't need to install Essbase client with IR since you've got Essbase server installed. However, I usually have them installed separately in production environment.
HTH,
Gerd

Similar Messages

Interactive Reporting 11.1.2.2. - Cannot See OCE Connections

Hi
I have just installed Hyperion Interactive Reporting 11.1.2.2 and I have created a new oce and reporting using IR studio.
I then imported the datasource into a folder in workspace. However when I go to import the report, the drop down list for selecting the oce is empty.
Am I missing a step or is this a known issue?
Thanks
Michelle

So the steps you followed are like this :
1)Created a OCE and report in the IR studio.
2)Imported the OCE into the workspace folder.
3)Imported the BQY and selected the OCE while publishing the BQY.
So all these steps you had done as the admin user ? Also could you check if you had updated the data source entry in the DAS .

Hyperion Interactive Reporting Web Client Installation in Linux.

Hi everybody,
Is there any official documentation of how to install Hyperion Interactive Reporting WEB Client in Linux environments ?
I checked Oracle Documentation and I found information about the HIR Desktop Client. But not about the web client.
Note: I need official documentation because of a discussion with security admins.
Any Help ?
Regards,
Gustavo.

The information required to automate (silent) the Insight/Plugin Installation is as follows:
Before going for the Silent Installation of 11.1.1.3 IR Web Client, we need create a Response File and moved the response file to Installer location to automate the Install.
Please follow the below procedure to accomplish the same:
1. Record a response file use the command "setup /ieinstall -r" (or "setup /ff install -r" if you use Firefox).
2. The above command will then create a setup.iss file in the <C:\Windows> directory.
3. Then move that <C:\Windows\Setup.iss> file to the Insight folder, so to resides with the setup.exe.
4. Then to launch the silent installation, use the command "setup /ieinstall -s" and it will use the options you choose when creating the response file.
5. You can create a batch file with the command line script as mentioned in Step 4 and keep in the same folder. So that the end user can use the same to automate the install.

Interactive Reports Lost

It would appear that when a new Apex application is installed the Interactive Reports preferences are reset and any saved reports are lost. Am I doing something wrong or is this a feature of Interactive Reports.
Cheers
Shunt

Resurrecting/Bumping this thread.
I tried David Peake's advice on this but drew a blank.
Here's where I am with this.
Server 1: DEV & UAT environments
Server 2: Production & Demo environments
DEV APP_ID = 127
DEMO APP_ID = 555
I created a copy of 127 and assigned it the 555 ID during the 'copy' process.
I then exported App ID 555 from server 1 and imported it into server 2 following David's instructions.
+"select "Install As Application:" option of 'Reuse Application ID xxx From Export File', not 'Auto Assign New Application ID' or 'Change Application ID'"+
Sadly, you guessed it, the user saved IRR reports are no more.
Has anyone cracked this?
Can anyone see what I may be doing wrong?
Any help appreciated.
Like many people here, I have lots of users with carefully crafted IRR regions. I don't want to be the one to tell them they have to re-create them.
There HAS to be a way to save them.
Thanks
Simon Gadd

Issue working with Interactive Reporting and Metaread option on Essbase 11

Issue:
I can´t see members/Generations of Essbase using the OLAP Query Object in Interactive Reporting, when Essbase Filters ( Metaread ) were applied on Dimensions
Versions:
Interactive Reporting 11 / Essbase 11
Comments:
- If I’m connected, with an Admin user who don't have Metaread Filter Security it works fine.
Tests:
- I do a test when I connect my query to Essbase 9.2, it works fine and I can see the members and generations without problems.
It seems that could be a bug, did you have any ideas about what would happened with the Essbase 11.1.2 that IR could not interpret the same way as Essbase 9.2 do
Regards
Alberto

<p>Are you creating the computed item on the Request line or theResults columns?</p>

Interactive Reporting issue on Windows Server 64 Bit

Hi All,
I am facing on Interactive reporting couldn't run on workspace, here are my Hyperion enviroment.
1. Hyperion version 11.1.2.1
2. All Hyperion component are running on Windows Server 2008 64 Bit
3. Installed Essbase client on the server that Workspace running.
Do you have any solution on this? Could you please help me on this issue?
Regards,
Nick

Hi All,
I am facing on Interactive reporting couldn't run on workspace, here are my Hyperion enviroment.
1. Hyperion version 11.1.2.1
2. All Hyperion component are running on Windows Server 2008 64 Bit
3. Installed Essbase client on the server that Workspace running.
Do you have any solution on this? Could you please help me on this issue?
Regards,
Nick

Creating new .OCE file in Interactive reporting Studio

Hi all,
I was trying to make a new document with a new database connection file, for Essbase on Interactive reporting studio 9.3.1 ( windows 32 bit)
For this purpose I used
connection software: Essbase
Dtaabase : Essbase
But some critical error message was displayed and the process couldn't proceed for user name , Pwd. and Host name.
While going through OTN discussion for this issue I came to know that we need to do the following:
start->All Programs->Hyperion->Reporting and Analysis->Utilities and Administration->Service Configurator->Modules->Local Service Configurator-> [sign in]-> [doubleclick on local service "DAS1_<servername>"]->Data Source->New...->
Connectivity type -- Essbase
Database type -- Essbase
" Signing in" into LSC was not successful still I could progress as shown in above navigation.
However even this could not resolve the issue.Even restarting the server was of no help.
Please help if any of you have the solution.
Thanks in advance....
Please see otn discussion link below for further details:
connect to a essbase database from interactive reporting studio
Edited by: user12973893 on May 14, 2010 3:28 AM

Forgot to mention I installed version 9.2

Can we merge data from multiple sources in Hyperion Interactive Reporting ?

Hi Experts,
Can we merge data from multiple sources in Hyperion Interactive Reporting ?Example can we have a report based on DB2
Oracle,
Informix and Multidiemnsional Databases like DB2,MSOLAP,ESSBASE?
Thanks,
V

Yes, Each have their own Query and have some common dimension for the Results Sections to be joined together in a final query.
look in help for Creating Local Joins

Interactive Report

How to create a classical report for this requirements,
1) purchase documents and vendor.
2) vendor performance report that lists vendor name, materials
Supplied and actual delivery times, payments terms and prices
Purchase.
3) Requisitions with details like MRP controller, release date, unit
to Measure along with the standard details
4) list of customer number, Credit limit To the given Customer.
Thanks and Regards,
Sivaguru.

Joel,
I have checked the report attributes and the "Save Report" checkbox is checked.
I as a developer, can save a default report selection and this is understood.
The problem is, when signing in as a user, no save icon is visible.
I thought maybe it was something with the install, so I created the Demo application and if I create an interactive report there, it works fine for the end user.
They do act differently in development modes between the two applications.
In Demo, if I save as a developer, "Save Report" choice, I get a window where I can name the report or select from drop down, "As default Report Settings".
In my application, if I save as a developer, "Save Report*" choice, I get a window that just states:
"The current report settings will be used as the default for all users" and my choice is Cancel or Apply.
The choice in developer mode is also different, one has an asterisk and the other doesn't.
I think it might have something to do with authentication?
The Demo application prompts for user name and password and my application doesn't have authentication because user is authenticated done before getting into the application.
Without authentication, it probably won't save reports for each user.
I do have access to each users id, would need to know where I can use it to tell the application this and that they are authenticated already.
Thanks for your help,
Rick

Performance issue with Hyperion Interactive Reporting Report

Hi,
We created a report in Hyperion Interactive reporting using Hyperion Essbase as database connection file .
Report performance was good in Interactive reporting Studio we don't have any problem in studio.
when we open the report in Hyperion Workspace report performance is very very slow. We are using system 11.1.1.3
Any suggestions to resolve performance issue will be really helpful.
Thanks in advance
Regards
Vamsi

Thank you so much, It is working fine when the report is in table structure (List Report. I mean insert a table and drag and drop the fact items and dimention items in to the table)
The requirement is looks like that, it is not a pivot table. Now I want apply the different color or shadow for Item1 and Item 2 in all groups... Please help me.
Total Fact Fact 1 fact 2 Fact 3 ......
Group 1
Item 1 Item 1 000 000 000 000 ...
Item 2 Item2 000 000 000 000 ....
Group 2
Item 1 Item 1 000 000 000 000 ...
Item 2 Item2 000 000 000 000 ....
Group 3
Item 1 Item 1 000 000 000 000
Item 2 Item2 000 000 000 000
Thanks and Regards,
Murugan

Error opening PDF downloaded from Interactive Report

hi -- I'm getting an error opening a PDF file downloaded from an interactive report.
I've seen on the forum that this could be related to the size of the file, but I've tried
this out on 10-row results (1k files) and it's still an issue.
I save the file to my file system. If I try to open it in Adobe Reader, I get:
File does not begin with '%PDF-'
and
Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded).
If I try to open in Internet Explorer, I get:
File does not begin with '%PDF-'
Other users are having the same problem. Download to csv and open in Excel works fine.
Do I need to have special print attributes for this? I didn't think so... I'm just using the defaults
(response header = report settings, content disposition = attachment).
Ideas?
Thanks,
Carol

Hi,
I'm having the same problem that was described above, and my site does have BI Publisher installed, and it does successfully produce readable pdfs for many reports.
But there are other reports, even reports produced using the Apex Wizard and all defaults, that just keep producing the same Adobe Reader error reported above, ie
"Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded)."
Any suggestions?
Cheers,
Peter

Error in exporting from Interactive Report to PDF format

Hello,
i am using APEX and from an Interactive Report i am trying to export using Download | PDF format. The table and corresponding report has only text fields. Database character set is UTF-8. Up to now i haven't been able to get a PDF file that can be open from Adobe Acrobat Reader. Every file fails opening with message like "Adobe Reader could not open filename.pdf, because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). This happens for every report i have tried up to now. If i export report in CSV format all are ok.
Is there a known bug with PDF download of APEX?
TIA

See this link: http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
FOP & Cocoon are free (just need to install the software and configure) Bi Publisher I believe works only for Standard Reports and no Interactive reports at this time.. If you have the $$ BI Publisher is worth the investment!!
Also, it is rumored that APEX 4.0 will have the PDF generation built in as apposed to the current model where you need to bolt something on..
Thank you,
Tony Miller
Webster, TX

Web client and desktop client not available for Interactive reporting 11.1.2.2

Hi team,
Currnetly we are usning EPM 11.1.2.2 , we are trying to install and configure
Interactive reporting in Linux 64 bit system.
we are few questions jotted below:
Interactive reporting studio client & Interactive reporting Dashboard Development Studio client are disabled.
post installation we are not able to see IR Client folder in <EPM HOME> location.
while launching workspace we are not able to see the WEB Client Interactive reporting under TOOLS-->INSTALL.
we read in a blog, which states it Interactive reporting needs a license. whether it needs any special License for using it?
we downloaded the Entire Dump of EPMS 11.1.2.2 from Oracle Edelivery website.
Kindly let us know we are missing any where?
we are strucked at this point.
Regards
Chinu

If you want the 11.1.2.0 assemblies you will need to contact Oracle as they have been removed from edelivery.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase and Reporting 11.1.2.1 - Architecture

I want to install Essbase, SMartView, and Financial Reporting - 25 users, 3-5 cubes, 20-30 reports.
Using the sample deployment scenario from the Install Start Here, I came up with:
Server 1 - (Win 2008 64-bit, 4 x 2.5 +8GB RAM, 50GB Disk)
Essbase
Essbase Studio (maybe)
Server 2 - (Win 2008 32-bit, 2 x 2.5 +4GB RAM, 32GB Disk)
Foundation
Reporting and Analysis Framework
FR Web
FR Print Server
EAS
WebLogic
Ghostscript
Is this configuration sufficient?

Any reason why server 2 is 32bit, also I would probably increase the ram on server 2
Cheers
John
http://john-goodwin.blogspot.com/

JavaScript error on Interactive Report

When clicking on the Magnifying glass of my interactive report search bar, I receive a JavaScript error.
Line: 2 Char: 15193 Error: Syntax Error
The page that I am navigating to has 2 regions. The first is an interactive report and the second is an html region that has an Iframe reference to another interactive report. Based upon the selection of a radio group, the corresponding region(interactive report) displays. All other interactive reports work fine when their pages don't have a region with a Iframe reference.
If I navigate to another page after the error occurs and then come back to the page, everything then works fine. The error only happens on the first use. I have installed the latest patch set for Apex 3.2 I currently am running 3.2.1.00.11. I read a bug on Metalink that referenced this javascript error, but applying the patch set does not seem to fix the issue. The bug was 8568894.
Any help would be appreciated.

This might be useful for others also...
After hours and hours of debugging headers and responses and comparing pages to others which work, I realised that this interactive report's display condition is based on REQUEST = SUBMIT.
As such, the actions menu will NOT set the Request parameter when clicking in the actions menu and the Apex engine refuses to send anything back to the browser - not even an error message.
I'll raise a bug for this via Oracle Support.
Cheers, Pete

Installing Essbase + Interactive Reporting

Similar Messages

Maybe you are looking for