Installing Exchange Server 2010 tools on windows 8.1
Hi Guys I'm busy installing Exchange 2010 console on my local machine but no luck.
I've added the necessary tools that are needed to install the console.
When Installing it gives me the error below.
Can anyone assist on the matter.
Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Similar Messages
-
Can we possible to install exchange server 2010 on my server 2012 Operating system ?
Sir ,
I am planning to install Exchange server 2010 Sp3 . But in my operating system is Windows Server 2012 R2 . So i have to confirm is that possible or not ? Can anyone know please help me. Thanks in advance .Hi,
As all above saying, it is not supported to install Exchange server 2010 SP3 in Windows Server 2012 R2. Please refer to
supported Operating Systems for
Exchange server 2010:
http://technet.microsoft.com/en-US/library/aa996719(v=exchg.141)
Additionally, Windows Server 2012 R2 will be a supported operating system for Exchange Server 2013 with SP1 coming in early 2014. Let’s waiting for the release about it. For more information, please refer to:
http://blogs.technet.com/b/exchange/archive/2013/11/20/exchange-server-2013-service-pack-1-coming-in-early-2014.aspx
Best Regards,
Winnie Liang
TechNet Community Support -
Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insightFound the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual. -
Installing Exchange server 2010 on Server 2012
I understand that SP3 supports Server 2012.
Looking at the size of the extracted files on SP3 this is not a slipstreamed later version of Exchange right?
Am I also right in thinking, I just need to:-
- Update the schema and Domain prep it
- Use the Exchange 2010 with SP1 disk to complete base install and then apply SP3
Does that sound about right?Hi,
Apart from the suggestions above, before you decide to install Exchange 2010, please make sure you meet the Exchange 2010 installation prerequisites. For more details about Exchange 2010 prerequisites, you can refer to the following article.
http://technet.microsoft.com/en-gb/library/bb691354(v=exchg.141).aspx
And here is a related article about how to prepare Active Directory and domains for installing Exchange Server 2010 which may help you.
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Hope this helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Cannot install exchange server 2010 without small business server 2011
we purchased Windows Small Business server 2011 for one of our servers and installed the software and setup exchange server for the office. We had some 3rd party software that would not work with small business server so we had to install windows
2008 r2 server. we still need exchange server 2010. Is there anyway to install without small business server? When I entered the key in exchange server for the small business server it is saying that it is an invalid key. We have a
genuine version of windows small business server. is it all or nothing for the software. ThanksSBS is indeed all or nothing. Breaking apart the individual components is not allowed. That includes exchange. If you want exchange without SBS, you'll need to buy exchange separately and exchange CALs. If you only have SBS CALs and aren't going to run
SBS, you'll need Windows CALs as well. -
How to install Exchange Server 2010 with the name of my existing Domain Controller.
I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Error when installing exchange server 2010
hi below is a copy of the error report please can someone help its doing my head in
03/11/2010 04:01:16.0648] [2] Beginning processing.
[03/11/2010 04:01:16.0742] [2] Instantiating handler with index 0 for cmdlet extension agent "Admin Audit Log Agent".
[03/11/2010 04:01:16.0757] [2] Current ScopeSet is: {Domain Read Scope: {, }, Domain Write Scope(s): {, }, Configuration Scope: {, }, Server Configuration Scope(s): {, }, , Exclusive Scope: {, }}
[03/11/2010 04:01:16.0773] [2] Resolved current organization: .
[03/11/2010 04:01:16.0976] [2] [ERROR] Unexpected Error
[03/11/2010 04:01:17.0007] [2] [ERROR] An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
[03/11/2010 04:01:17.0023] [2] Ending processing.
[03/11/2010 04:01:17.0023] [1] The following 1 error(s) occurred during task execution:
[03/11/2010 04:01:17.0023] [1] 0. ErrorRecord: An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
[03/11/2010 04:01:17.0023] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Clients.FormsAuthenticationMarkPathUnknownSetError: An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
at Microsoft.Exchange.Management.Metabase.IisUtility.CheckSuccess(String iisAdminPath, Hresults hresult, Int32 propertyId)
at Microsoft.Exchange.Management.Metabase.IisUtility.SetSslCertificate(String webSitePath, X509Certificate2 certificate, Boolean requireSsl)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, Boolean requireSsl, ADSystemConfigurationSession dataSession, Server server, List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
[03/11/2010 04:01:17.0023] [1] [ERROR] The following error was generated when "$error.Clear(); Install-ExchangeCertificate -services IIS -DomainController $RoleDomainController" was run: "An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.".
[03/11/2010 04:01:17.0023] [1] [ERROR] An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
[03/11/2010 04:01:17.0023] [1] [WARNING] <<< Setup failed to execute a task. Dumping all variables.... >>>
[03/11/2010 04:01:17.0039] [1] $ = $null
[03/11/2010 04:01:17.0039] [1] ? = True
[03/11/2010 04:01:17.0039] [1] ^ = $null
[03/11/2010 04:01:17.0039] [1] _ = $null
[03/11/2010 04:01:17.0039] [1] ADServerSettings = Microsoft.Exchange.Data.Directory.SetupServerSettings
[03/11/2010 04:01:17.0039] [1] args = $null
[03/11/2010 04:01:17.0039] [1] ConfirmPreference = None
[03/11/2010 04:01:17.0039] [1] ConsoleFileName =
[03/11/2010 04:01:17.0039] [1] DebugPreference = SilentlyContinue
[03/11/2010 04:01:17.0039] [1] Error = System.Collections.ArrayList {An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.; }
[03/11/2010 04:01:17.0039] [1] ErrorActionPreference = Continue
[03/11/2010 04:01:17.0039] [1] ErrorView = NormalView
[03/11/2010 04:01:17.0039] [1] ExchangePropertyContainer = Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer
[03/11/2010 04:01:17.0039] [1] ExecutionContext = System.Management.Automation.EngineIntrinsics
[03/11/2010 04:01:17.0039] [1] false = False
[03/11/2010 04:01:17.0039] [1] FormatEnumerationLimit = 4
[03/11/2010 04:01:17.0039] [1] HOME = C:\Users\Administrator
[03/11/2010 04:01:17.0039] [1] Host = System.Management.Automation.Internal.Host.InternalHost
[03/11/2010 04:01:17.0039] [1] input = $null
[03/11/2010 04:01:17.0039] [1] MaximumAliasCount = 4096
[03/11/2010 04:01:17.0039] [1] MaximumDriveCount = 4096
[03/11/2010 04:01:17.0039] [1] MaximumErrorCount = 256
[03/11/2010 04:01:17.0039] [1] MaximumFunctionCount = 4096
[03/11/2010 04:01:17.0039] [1] MaximumHistoryCount = 64
[03/11/2010 04:01:17.0039] [1] MaximumVariableCount = 4096
[03/11/2010 04:01:17.0039] [1] MyInvocation = $null
[03/11/2010 04:01:17.0039] [1] NestedPromptLevel = 0
[03/11/2010 04:01:17.0039] [1] null = $null
[03/11/2010 04:01:17.0039] [1] OutputEncoding = System.Text.ASCIIEncoding
[03/11/2010 04:01:17.0039] [1] PID = 5088
[03/11/2010 04:01:17.0039] [1] ProgressPreference = Continue
[03/11/2010 04:01:17.0039] [1] PSBoundParameters = System.Collections.Generic.Dictionary`2[System.String,System.Object]
[03/11/2010 04:01:17.0039] [1] PSCulture = en-GB
[03/11/2010 04:01:17.0039] [1] PSEmailServer =
[03/11/2010 04:01:17.0039] [1] PSHOME = C:\Windows\System32\WindowsPowerShell\v1.0
[03/11/2010 04:01:17.0039] [1] PSSessionApplicationName = wsman
[03/11/2010 04:01:17.0039] [1] PSSessionConfigurationName = http://schemas.microsoft.com/powershell/Microsoft.PowerShell
[03/11/2010 04:01:17.0039] [1] PSSessionOption = System.Management.Automation.Remoting.PSSessionOption
[03/11/2010 04:01:17.0039] [1] PSUICulture = en-US
[03/11/2010 04:01:17.0039] [1] PSVersionTable = System.Collections.Hashtable {System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; }
[03/11/2010 04:01:17.0039] [1] PWD = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[03/11/2010 04:01:17.0039] [1] ReportErrorShowExceptionClass = 0
[03/11/2010 04:01:17.0039] [1] ReportErrorShowInnerException = 0
[03/11/2010 04:01:17.0039] [1] ReportErrorShowSource = 1
[03/11/2010 04:01:17.0039] [1] ReportErrorShowStackTrace = 0
[03/11/2010 04:01:17.0039] [1] RoleBinPath = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[03/11/2010 04:01:17.0039] [1] RoleCustomerFeedbackEnabled = $null
[03/11/2010 04:01:17.0039] [1] RoleDatacenterPath = C:\Program Files\Microsoft\Exchange Server\V14\Datacenter
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointABCHContactService = <ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointDomainPartnerManageDelegation = <ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveFederationMetadata = <ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveGetUserRealm = <ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveRmsCertificationService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/licensing.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveRmsLicensingService = <ServiceEndpoint><Url>https://certification.drm.microsoft.com/certification/certification.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveRmsPublishingService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/publish.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveServiceLogin2 = <ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointRmsPremiseAuthenticationCertificate = <ServiceEndpoint><CertificateSubjectName>CN=exchangelabs.live-int.com, OU=Exchange, O=Microsoft, L=Redmond, S=Washington, C=US</CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDomainController = DSX4002-12.win.cxvps.net
[03/11/2010 04:01:17.0039] [1] RoleFqdnOrName = DSX4002-12.win.cxvps.net
[03/11/2010 04:01:17.0039] [1] RoleInstallationMode = Install
[03/11/2010 04:01:17.0039] [1] RoleInstallPath = C:\Program Files\Microsoft\Exchange Server\V14\
[03/11/2010 04:01:17.0039] [1] RoleInvocationID = 20100311-040116061746283004
[03/11/2010 04:01:17.0039] [1] RoleIsAdminToolsRoleInstalled = True
[03/11/2010 04:01:17.0039] [1] RoleIsDatacenter = False
[03/11/2010 04:01:17.0039] [1] RoleLanguagePacksPath = E:\
[03/11/2010 04:01:17.0039] [1] RoleLoggedOnUser = WIN\Administrator
[03/11/2010 04:01:17.0039] [1] RoleLoggingPath = C:\Program Files\Microsoft\Exchange Server\V14\Logging
[03/11/2010 04:01:17.0039] [1] RoleNetBIOSName = DSX4002-12
[03/11/2010 04:01:17.0039] [1] RolePreviousVersion = $null
[03/11/2010 04:01:17.0039] [1] RoleProductPlatform = amd64
[03/11/2010 04:01:17.0039] [1] RoleRoleName = BridgeheadRole
[03/11/2010 04:01:17.0039] [1] RoleRoles = AdminToolsRole
[03/11/2010 04:01:17.0039] [1] RoleSetupLoggingPath = C:\ExchangeSetupLogsHi,
ErrorRecord: Microsoft.Exchange.Management.Clients.FormsAuthenticationMarkPathUnknownSetError: An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
This error is related to installing default SSL certificate on IIS.
Have a look into this to resolve it:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_23852190.html
If it still not resolves your issue, then i would recommend to reinstall the IIS and then install the Exchange.
Regards,
Laeeq Qazi|Team Lead(Exchange + Sharepoint + BES + DynamicsCRM)
www.HostingController.com -
Failure in Installing Remote Server Administration Tools on Windows 8.0
I have recently download
Remote Server Administration Tools (64 bit) for Windows 8,but unfortunately I couldn't Installed it & an error message appeared on the screen after I tried to
Install the tools, saying; "The update is not applicable to your computer".
Then I followed the instructions available on the same page, but there in Turn windows feature
on or off's list in the Control panel, the
Remote Server Administration Tools option is not available. After that I have updated the OS completely, from Windows update option on the Control panel, but the problem is still exist. So therefore I need help regarding this matter in order to solve
this unexpected problem, that I am currently facing.
Thank you .
Abdur Rahmanif youre using win 8.1 you have to install this one
http://www.microsoft.com/en-us/download/details.aspx?id=39296
Darshana Jayathilake -
Install Exchange server 2010 in Single forest Multiple AD domain Scenario
Hello Folks,
I am trying to install a new exchange 2010 server in an enviroment which never had exchange.
Below is the env details
1 Forest
3 AD domains
Coustmer's requirement is that he wants to install exchange in only domain and other domain will not have exchange server the domain A which has server install should host the exchange mailbox's for other 2 domains and also capable enough to handle
the mailflow of each domain with diffrent SMTP domain. Have done research but havent got the exact scenario.
Now i am confused on how to start with this project any feedback inputs would be of great help to me.
BR/DeepakExchange server is forest wide role, so it does not depend much on number of domains in the same forest. Usually, you install Exchange in forest root domain in your forest, and Exchange will host mailboxes from any user from entire forest. So, actually,
your scenario is supported by default :). Just go and install Exchange in one domain. As soon as you prepare other domains for Exchange recipients, you will be able to create mailboxes from all domains in your forest.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir -
Exchange Server 2010 EMC Error
Hi, I have installed Exchange Server 2010 SP3 in Windows Server 2012 Domain Controller. After the successful installation, I am not able to view the options in the Exchange Management Console. It gives the error "The WinRM client cannot process the
request. It Cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid."
Can anyone help on this issue to solve this. Thanks in advance.
Regards
BabuHi
Installing exchange 2010 or any version on a domain controller is not recommended.
Please check that all the IIS App pools are started, the relevant services are started etc. Is this in a production environment? -
Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
if ($exsSid -eq $null -or $exsSid -eq "")
$exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
" was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep GuptaHi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards! -
Problems installing Mailbox role on Exchange Server 2010 SP3
I am in the process of installing Exchange Server 2010 SP3 on a Windows Server 2012 server in order to migrate our existing Exchange 2003 server. Everything went well with the installation process until I went to add the Mailbox server role, which is giving
me the following error (from the log file):
[05/03/2013 21:58:09.0090] [1] Executing:
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
[05/03/2013 21:58:09.0105] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'TAM-FS2.tacomaartmuseum.org', Preferred Global Catalog: 'TAM-FS2.tacomaartmuseum.org', Preferred Domain
Controllers: '{ TAM-FS2.tacomaartmuseum.org }'
[05/03/2013 21:58:09.0105] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
[05/03/2013 21:58:09.0276] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
[05/03/2013 21:58:09.0344] [2] Process standard output:
[05/03/2013 21:58:09.0344] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
[05/03/2013 21:58:09.0347] [2] [ERROR] Unexpected Error
[05/03/2013 21:58:09.0347] [2] [ERROR] Process execution failed with exit code 87.
[05/03/2013 21:58:09.0350] [2] Ending processing Start-SetupProcess
[05/03/2013 21:58:09.0350] [1] The following 1 error(s) occurred during task execution:
[05/03/2013 21:58:09.0350] [1] 0. ErrorRecord: Process execution failed with exit code 87.
[05/03/2013 21:58:09.0350] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
[05/03/2013 21:58:09.0351] [1] [ERROR] The following error was generated when "$error.Clear();
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
" was run: "Process execution failed with exit code 87.".
[05/03/2013 21:58:09.0351] [1] [ERROR] Process execution failed with exit code 87.
[05/03/2013 21:58:09.0351] [1] [ERROR-REFERENCE] Id=MailboxComponent___13A8A6B7DE0A4fe3BEB5CB1D86105DA3 Component=EXCHANGE14:\Current\Release\PIM Storage\Content Indexing
[05/03/2013 21:58:09.0351] [1] Setup is stopping now because of one or more critical errors.
[05/03/2013 21:58:09.0351] [1] Finished executing component tasks.
[05/03/2013 21:58:09.0393] [1] Ending processing Install-MailboxRole
I've searched all over but can't seem to find any reference to "exit code 87" - does anyone have any ideas?
Thanks,
MattError 87 -with these details below - and a fix. The situation that got me here by the way was an incomplete install that was uninstalled, then installed again.
[02/24/2014 06:49:06.0967] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'xxxxxxxxxxxxxxx', Preferred Global Catalog: 'xxxxxxxxxxxxxxxxxxxxxxxx', Preferred Domain Controllers:
'{ xxxxxxxxxxxxxxxxxxxxxxx }'
[02/24/2014 06:49:06.0967] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
[02/24/2014 06:49:06.0967] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
[02/24/2014 06:49:07.0592] [2] Process standard output:
[02/24/2014 06:49:07.0592] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
[02/24/2014 06:49:07.0592] [2] [ERROR] Unexpected Error
[02/24/2014 06:49:07.0592] [2] [ERROR] Process execution failed with exit code 87.
[02/24/2014 06:49:07.0592] [2] Ending processing Start-SetupProcess
[02/24/2014 06:49:07.0592] [1] The following 1 error(s) occurred during task execution:
[02/24/2014 06:49:07.0592] [1] 0. ErrorRecord: Process execution failed with exit code 87.
[02/24/2014 06:49:07.0592] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
[02/24/2014 06:49:07.0608] [1] [ERROR] The following error was generated when "$error.Clear();
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
" was run: "Process execution failed with exit code 87.".
[02/24/2014 06:49:07.0608] [1] [ERROR] Process execution failed with exit code 87.
I found I could fix this by removing the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Microsoft-Exchange-Troubleshooters/Operational
and everything underneath it.
My guess is that wevtutil didn't like adding an event log where it already existed but was slightly different in setup (no idea how, exactly).
After 24 hours I'll try post again - giving things time to make sure they are actually working. -
After installation of Windows 2010 server.
can any one tell me...what are the next steps to work with Exchange Server 2010 ?
[email protected]Hello friend,
first of all there is no version on windows server named "windows 2010 server"!!!!!
To install exchange server 2010, you can either install windows server 2008 standard/enterprise SP2 or windows server 2008 standard/enterprise R2 (actually its better to install w2k8 standard/enterprise R2 release to make the installation of exchange server
2010 easier). The server on which exchange will be installed should be part of a domain because exchange server works along with active directory
Here are the steps to follow for a successful exchange server 2010 installation:
Hardware requirements
-x64 architecture (Intel or AMD64)
-Quad core processor (minimum)
-8 GB RAM (minimum) if you want to combine the roles on one server
-2 GB HDD minimum
Software requirements
-w2k8 enterprise/standard R2 or w2k8 enterprise/standard service pack 2
-exchange server 2010 software
*Prerequisites for server 2008 standard/enterprise SP2
-Install the Microsoft.NET framework 3.5 SP1
-Install the .NET Framework 3.5 Family Update
-Install Windows Remote Management 2.0
-Install Powershell v2
-On Hub Transport & Mail Box servers install the Microsoft Filter Pack
-On Unified messaging server install server manager desktop experience
*Prerequisites for server 2008 standard/enterprise R2
-Install the Microsoft Filter Pack on Hub Transport and Mail Box server
-From PowerShell, type "Import-Module ServerManager"
-Use the Add-WindowsFeature cmdlet to type:
Add-WindowsFeature NET-Framework, RSAT-ADDS, Web-Server, Web-Basic-Auth,
Web-Windows-Auth, Web-Metabase, Web-Net-Ext, Web-Lgcy-Mgmt-Console, WAS-Process-Model,
RSAT-Web-Server, Web-ISAPI-Ext, Web-Digest-Auth, Web-Dyn-Compression, NET-HTTP-Activation,
RPC-Over-HTTP-Proxy, Desktop-Experience-Restart
Note: If you are not using the Unified Messaging role you can remove Desktop Experience
After restarting, configure the TCP Port service to start automatically using: "Set-Service NetTcpPortSharing-StartupType Automatic".
Put the user account from which you performed the installation in the "Organization Management" group -
Exchange Server 2010 Installation
I am getting the following error while installing Exchange Server 2010 on Server 2008 R2. Following is the log file:
Summary: 3 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:02
Preparing Setup
Completed
Elapsed Time: 00:00:00
Mailbox Role
Failed
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Elapsed Time: 00:00:02
Finalizing Setup
CancelledHi,
Please make sure the account has required permissions: Schema Admins, Domain Admins, Enterprise Admins, and Organization Management.
And please check if you have meet the prerequisites for Exchange 2010 installation.
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.141).aspx
In addition to the prerequisites, we also need to prepare AD and domain for Exchange 2010.
Prepare Active Directory and Domains
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
To narrow down the issue, I recommend you check the setup log to see if there is any clues.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Hello everybody,
I created a domain named apex.local, afterwards i installed exchange server 2010 and i created users' mailboxes. Each user has its mail address made up of his name & apex.local (example:
[email protected]). But there is an issue i want to fix, i want to make a change so that
"[email protected]" becomes "[email protected]" without reinstalling exchange server 2010. How can i proceed to solve this problem??Hi,
To change the primary address, we need to add it in the accepted domain and an email address policy.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb124423(v=exchg.141).aspx
And I’d like to add that we need to add the host name autodiscover.apex.org in the certificate.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support
Maybe you are looking for
-
My iPad wont let me download apps it just keeps saying waiting.
My iPad wont let me download apps it just keeps saying waiting.
-
How do I align a flex field segment using personalizations?
This is my first attempt at an OAF form personalization. I added three DFF segments (read only) to the requisition headers portion of the iProcurement requisitions form. I'll do my best here to try and show what has happened, I hope this will maint
-
SOAP handlers and the WebLogic Security Provider Framework
I am new to WebLogic... I am trying to understand the Weblogic security framework in terms of how a SOAP message would be processed. Do SOAP handlers get called before the configured security providers? after being processed by the Authentication pro
-
Classname AbsTime not Found WTH?
Win Vista, LV 8.6.1 OK, so I got around the can't-resize problem of yesterday by trashing the cluster and moving the old contents into a new cluster. I hadn't edited that cluster typedef in years, but now I want to add some stuff. One of the things I
-
Method for uploading Customer Hierarchy Data
hi experts, i have a requirement in which i need to upload Customer Hierarchy data into ECC system from CRM system. I need to know is there any method in LSMW by which i can do it? thanks, Ags.