Installing .exe software - Automation without switches and only GUI

Almost all installs can be run with a /q or /s if this one cannot, maybe there is a specific business installer that will do this.
What is the application and how are you trying to install it - is it a GPO, Script, batch file, as a user, pushed as an administrator?

I've setup automated .exe and .msi installs for a while now but I've recently run into a program that doesn't have any switches or additional input that can run in command prompt.
My question is if there is any software that can do add this functionaly and automate GUI installations
This topic first appeared in the Spiceworks Community

Similar Messages

  • HT201210 i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server c

    i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server contact problem. what can i do to start my phone????  plz help me

    I will need a little bit of information about your phone. What kind of error are you getting?

  • HT201364 trying to install new software for OS mavericks and i get the he product distribution file could not be verified. It may be damaged or was not signed.can you assist

    trying to install new software for OS mavericks and i get the the product distribution file could not be verified. It may be damaged or was not signed error message
    .can you assist

    What "new" software?
    Barry

  • Just installed icloud onto window 7 pc and only a few photos from ipad came through on photo stream why dont they all come through?

    just installed icloud onto window 7 pc and only a few photos from ipad came through to Photostream why dont they all come through?

    WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.

  • Re-Install Phone software when its switched off/ R...

    Hi
    i own a Nokia 5610 xpressmusic mobile, the problem i face is its software is totally unstable and it crashes often and the phone doesnot switch on or hangs or restarts again and again.. after swtching on. till now i run to service center to instal the software again to make it right.. But as my warranty is gonna expire soon.. Do u know any way by which i can re-install or factory reset through computer when its switched off. i tried software updater but its not able to detect the switched off phone.
    Plz suggest a solution.
    How to instal software when the mobile is not swtching on

    You can't do anything on a Series 40 phone such as the 5610 XM other than a revert to factory default settings, which probably won't solve the problem for you.
    You need to take the phone to a Nokia Care Point before the warranty expires and get them to fix the phone.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Installing JMS 3.6 without JRE and JDK

    I'm looking for a way to install JMS only, without installing the new versions of JRE and JDK. The application I'm working on works with JRE 1.5.0_02 only, and there is no plan to change that in the near future, however we want to upgrade to JMS 3.6 to be able to use the new imqPingInterval.

    Are you shure you have included the jre PATH (not CLASSPATH) in your PATH variable?
    Assuming you're working in a Linux (or unix) environmet, check the PATH: it should contain /usr/local/jdk1.3.1_01/jre/bin.
    I'm not sure this is really the answer, but there's no damage on trying it! :-)
    bye
    Michele

  • HT5278 How to download iOS 5.1.1 software update from itunes without switch and plug to pc?

    How to  download it?

    You can update your device wirelessly (available in ios 5 and later)
    If not, you need a computer.
    As part of the update and restore process, iTunes will (in order):
    Back up key elements of your device, such as settings, Contacts, Calendars, Notes, and your Camera Roll. iTunes will not, however, back up media content from your iOS device, such as music, apps, books, movies, and TV shows.
    Update your device to the latest version of iOS software.
    Restore your device from your most recent backup.
    Restart your device.
    Sync back media content from your iTunes Library to your device.
    If you are attempting to update using a Mac or PC with which you normally sync
    If you are attempting to update using a Mac or PC with which you do not normally sync
    Additional Information
    Notes:
    Completing your backup may take some time, depending on the amount of content on your iOS device.
    If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync.
    Movie rentals purchased directly from your device will not get transferred to your computer when you sync and transfer your purchases.

  • Restored today, but then downloaded and installed ios 7. on install restore point doesn't exist and only half a restore part way through ios 7, which has lost most stuff.  previous restore points dont seem to exist either only back in April

    I have restored earlier today and got a time confirmation afterwards.
    Have just installed IOS 7 to find that the restore point doesn't now exist according to itunes.
    The phone has made its own restore point part way through IOS 7 installation but half the stuff is missing.
    Help !!!
    I had loads of very important stuff on the phone.  But the only restore points now available are back in April

    I also have found out that having updated itunes that this has reverted to a previous setting of syncing my music!!
    What on eart is going on Apple ???
    This is really poor and not the firtst time these things have happened.  Billions of dollars and poor quality !!!

  • Portal template without tables and only with css

    Hi,
    I would like to know if it's possible to create portal templates that dont't use tables to define the layout but a css instead.
    Thanks,
    rjc

    With Portal 10.0, we introduced CSS-based (non-table) equivalents to our standard OOTB layouts. These have similar names to the pre-10.0 layouts with "flow" suffixes.
    Table-based:
    twocolumn.layout ("Two Column Layout" in the IDE)
    CSS-based:
    twocolumnflow.layout ("Two Column Flow Layout" in the IDE)
    It is also possible to create custom layouts and use whatever layout techniques are most appropriate for the circumstances:
    http://edocs/wlp/docs100/portals/develop_ui_lookfeel.html#wp1032320
    Tim

  • Ligthroom 5.5 after installing the software does not start and does not give any kind of mistake

    I subscribe to CC as a photographer and just inatalar Ligthroom but this does not start and no daningun mistake. Reinstall several times but still the same. What can be the problem?
    thanks

    Hola, arreglado por mi parte también, chateando (en inglés...) con un operador que ha demostrado conocer perfectamente la solución (para Win7):
    En carpetas "C:\Program files (x86)\Common Files\Adobe\" y "C:\ProgramData\Adobe\" deben activarse permisos de control total para el usuario (que puede no tener control total en el sistema) y desactivar "solo lectura" a las carpetas descritas y sus subcarpetas para que al iniciar se configure el registro adecuadamente. Una vez hecho esto me ha funcionado todo a la primera, me lo han explicado paso a paso por el chat. Un 10 para el técnico, un suspenso para Adobe por no publicar adecuadamente la solución.
    Gracias manufoto por tu explicación, parece que todo va a parar a las mismas carpetas.
    Saludos

  • I'm trying to install new software and my keychain asks for my password I put it in says its not right, gives me hint, same password it is the one I always use, so what do I do now?

    I am trying to install new software on my Imac and my keychain asks for my password, I type it in, it says it is wrong, I do it again, wrong, it gives me a hint, same one I have been using, wrong again, so I cannot get the new soft ware to download, how do I get my passwork on the keychain to work or how do I change it?

    What model iMac and what version of the Mac OS is installed? "About this Mac" from the Apple menu is a good place to start.

  • Xserve RAID with fibre switch and windows

    I have a customer who potentially is looking at an Xserve and RAID using a fibre switch with a couple of G5s with fibre cards for speed. They also have a Windows machine that they need to access files, but speed is not an issue. Will the Windows machine be able to see the RAID if it is shared by OS X Server via ethernet or does it need a fibre card? Thanks in advance for assistance!
      Mac OS X (10.4.3)  

    You can turn on Windows (SMB) sharing, or you can connect it directly via fibre channel. Note, if you connect it to the fibre, you can't have it access the SAME volume at the SAME time as the Macs are accessing (heck, you can't have the Macs access the SAME volume at the SAME time without software either), without Xsan and the StorNext file system.

  • Prevent Adobe application manager  auto install downloaded software

    I used Adobe application manager to download a trial version of photoshop cs6, but I need to install it at another time. Adobe application manager instead installs photoshop immediately.
    How Can I prevent Adobe application manager to install downloaded software automatically?

    You can only download a trial once, so you need to download it when you can use it.

  • Loading icloud software for windows 7 and it rolled back on an error

    Tried to install icloud software for windows 7 and it found an error on a file during installation and it rolled itself back, no explain of the error; have not idea....

    You can not create an iCloud account using a PC, you will need an Apple product. Once the account exists you can logon to it from a PC.

  • Is there a way to install exe of a vi on an XP machine without LV run-time and not have to restart?

    Hi,
    I need to deploy an application that reads channels from a FP module for testing purposes. The problem is, I cannot restart the system I need to install this on because it is running critical control software which cannot be interrupted. The system does not have the labview run-time engine and I know installing this requires a restart of XP probably due to registering DLLs or something.
    I'm using "Fieldpoint Network Read" to read from the module. The simple answer would be to simply install this on a machine on the same network that I can restart. However, I have no such luxury because I am connecting to the system in question over a long distance VPN connection and I need to be able to poll the data from the FP every 250ms which may be too much for the connection. 
    So basically, I need to find a way to read data from this FP in a manner similar to "FP Network Read" without restarting the system.  Is there any way to do this with labview? Alternatively, I may be able to write this app using LabWindows since I know some software is already running on that machine programmed with that.
    Solved!
    Go to Solution.

    The first thing I'd say is that a restart may not be necessary.  I have in the past installed LabVIEW development environment and when asked I said I would restart later.  Then I opened LabVIEW and started coding.  I'm not sure what it thinks it needs to restart for but it may not be required.
    The other thing I'd like to mention is that LabVIEW 7.1 and older can run EXEs without needing to install a run time engine.  So it is possible to build a EXE in 7.1, then include some files and DLLs in the same directory as the EXE, and when it is ran it will use them.  There's probably issues with talking to DAQ devices without MAX and I have no idea how you address this but it is another possibility.
    Of course you already know the best answer and that is to reboot the system when most convenient.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Maybe you are looking for

  • PDF viewer removes text from tabs and search bars

    Often when I open documents in the built-in PDF viewer Firefox freezes for a few seconds and then when it returns to life all the text not associated with a particular webpage is gone. The tabs for the Firefox windows have no text. The search bar has

  • Divx web player won't show me any player controls.

    I recently reinstalled divx on my macbook and now for some reason when i am streaming a divx video in safari there are no player controls. The video plays fine and when i double click, it was go to fullscreen. But it doesnt pause even when i push spa

  • Sad Face on my Ipod. is it battery related?

    I have an ipod 20Gb 4th gen/. Earlier today, it seems to have been a battery problem, i kept charging but the battery comes with one bar red, then a folder with exclamation pt. I was able to go to disk mode. Now all of a sudden , i get a Sad face and

  • Build Path will not save

    I was using a source folder before and was outputting to a different folder. I recently altered those settings to comply with some project regulations, now... the settings in Flex Build Path won't save. For example, I was relating to a Flex Library P

  • How do i adjust layers below a Shadows/Highlights smart object layer

    Hi In Photoshop CC I have created a number of layers for smart tonal adjustments. I then created a Smart object Shadow/Highlight layer base upon a copy of all layers below. However my layers below can no longer be altered as the Shadow/Highl;ight lay