Installing FIM Reporting in Productrion Server with mutilple portal

Hi,
I have 5 FIM Portal Server in production. I need below clarification.
Can you confirm if I can install FIM Reporting in just one server which have FIM Service installed on that?
Or
Should we run this on every FIM Service Portal [Suppose we have 5 Portal Servers]?
Can someone clarify my doubt?
I understand FIM Reporting is a component of FIM Service. So FIM Reporting installation should not depend on how many portal production architecture have, it can be installed on one of the FIM Service Server.
Aswathy Raj

On Mon, 27 Jan 2014 10:44:13 +0000, Aswathy Raj wrote:
I have 5 FIM Portal Server in production. I need below clarification.
Can you confirm if I can install FIM Reporting in just one server which have FIM Service installed on that?
Or
Should we run this on every FIM Service Portal [Suppose we have 5 Portal Servers]?
Can someone clarify my doubt?
I understand FIM Reporting is a component of FIM Service. So FIM Reporting installation should not depend on how many portal production architecture have, it can be installed on one of the FIM Service Server.
FIM Reporting really has nothing at all to do with the portal directly:
http://technet.microsoft.com/en-us/library/jj133842%28v=ws.10%29.aspx
Paul Adare - FIM CM MVP
I hope that's not UI -- but the proper term is a "Jet database", accessed
through the "Jet engine". A fitting name, considering that it sucks and
blows. -- Felix about Exchange's mailbox format

Similar Messages

Error Installing FIM Reporting in FIM 2010 R2 with SP1 - SCSM 2012 [CheckFIMWebSiteorSolutionPackExisting]

I am running into the below issue. I am installing FIM 2010 R2 SP1 Reporting with SCSM 2012 [SCSM successfully installed].
FIM R2 Reporting installation is failing with both Wizard and Command line.
Command line captures below error: Can some one help on this?
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
Property name = 'SHAREPOINT_URL', value = 'http://myurl.
Property name = 'UILevel', value = '2'.
CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
Action ended 0:27:20: INSTALL. Return value 3.
In below link, the above question is unanswered. Kindly help.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/37b1af85-aef0-422b-9417-7364d51d0df4/installing-fim-reporting-in-fim-2010-r2-with-sp1?forum=systemcenterservicemanager

Hi All,
Though we use SCSM 2012, the FIM 2010 Reporting (R2 SP1) installation throws the alert to run
KB2561430 hotfix (when run throght console) and above error (when run through commnad line).This is actually a bug and MS have fixed that in one of its FIM hotfix rollup. I could move out of the above error by applying the FIM hotfix mentioned
in the below link.
http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
Aswathy Raj

Installing FIM Reporting in FIM 2010 R2 with SP1

I tried to install the Reporting component. I have FIM 2010 R2 with SP1 and SCSM 2012. I get a error saying I have to install the KB2561430. This is apparently a hotfix for SCSM 2010 SP1. I thought that FIM R2 with SP1 supports SCSM 2012 as written:
FIM Reporting
Support for Windows Server 2012 has been added.
Support for SQL Server 2012 has been added.
Support for SCSM 2012 has been added.
http://technet.microsoft.com/en-us/library/jj863246(v=ws.10).aspx
Is there anything I need to install in the SCSM side?
I'm stuck here

Hi,
Even I am running into the same issue. And installing FIM 2010 R2 SP1 Reporting [SCSM 2012 successfully installed].
Both Wizard and Command line failing.
Command line captures below error: Did any one solved this issues? Kindly help
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
Property name = 'SHAREPOINT_URL', value = 'http://myurl.
Property name = 'UILevel', value = '2'.
CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
Action ended 0:27:20: INSTALL. Return value 3.
Aswathy Raj

Installing FIM reporting...

Hi all
We currently have a working single-server installation of FIM (FIMService, FIMSyncService, FIMPortal) and I'm looking ways to expand the installation with reporting features, with SCSM 2012. I was thinking about going with the 2 server configuration.
What should I install on the box I already have, SCSM Management console correct? Does it need a SQL instance?
And I build another server which also has SQL and I'll instal SCSMDW there?
What service accounts does SCSM and FIM reporting features need?
Thanks all!

You are looking of ways to expand the installation? Is this to meet any particular requirement? Are you looking for high availability?
For Reporting Services and SCSM there is a fairly large database footprint required, I have personally just implemented it for a customer into test and we decided to go with a dedicated SQL Cluster.
This would be a good place to start https://technet.microsoft.com/en-us/library/jj133853(v=ws.10).aspx
I would ensure you have the FIMService, SyncService etc DBs backed up with the encryption keys and a warm FIM server standing by if you are doing this in prod.
Ryan Betts
blog.ryanbetts.co.ik

Possible to install and configure adobe media server with existing apache

Hi All,
I am wondering if you know whether or not there would be an issue installing AMS Pro on a server that is already running a Moodle installation (2.4) with Apache 2.2?
If I opt to install AMS without installing apache, can I manually configure the exiting apache to enable iOS support, etc?
Any information is most appreciated!
Cheers,
G

You better post this question in the correct forum: Adobe Media Server maybe the moderator can move it.

MicroSoft Content Management Server with WL Portal 10

Hello,
Has anyone got experience with integrating MS Content Management Server with the BEA WL Portal 10?
i need develop a custom SPI?
Comments, Issues, opinions?
Best Regards,
Zarco

------- Pallav Tandon wrote on 1/18/05 1:37 PM -------Cam you elaborate more on the type of integration you are looking for.WE have done integration at portlet level...crawler level etc for MCMS .. I can share my experiences if you can provide some direct queries
Hi Pallav, we are also contemplating integration of MSCMS 2002 with plumtree. Can you describe what types of integration you have done?
- Brandt

How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.

I recently installed a fresh version of Lion Server after attempting to fix a broken upgrade. With some help from others, I've managed to get all the new features working and have kept notes, having found that many or most of the necessary installation steps for both the OS and its services are almost entirely undocumented. When you get them working, they work great, but the entire process is very fragile, with simple setup steps causing breaks or even malicious behaviors. In case this is useful to others, here are my notes.
Start with an erased, virgin, single guid partitioned drive. Not an upgrade. Not simply a repartitioned drive. Erased. Clean. Anything else can and probably will break the Lion Server install, as I discovered myself more than once. Before erasing my drive, I already had Lion and made a Lion install DVD from instructions widely available on the web. I suppose you could also boot into the Lion recovery partition and use disk utility to erase the OS X partition then install a new partition, but I cut a DVD. The bottom line is to erase any old OS partitions. And of course to have multiple, independent backups: I use both Time Machine with a modified StdExclusions.plist and Carbon Copy Cloner.
Also, if you will be running your own personal cloud, you will want to know your domain name ahead of time, as this will be propagated everywhere throughout server, and changing anything related to SSL on Lion Server is a nightmare that I haven't figured out. If you don't yet have a domain name, go drop ten dollars at namecheap.com or wherever and reserve one before you start. Soemday someone will document how to change this stuff without breaking Lion Server, but we're not there yet. I'll assume the top-level domain name "domain.com" here.
Given good backups, a Lion Install DVD (or Recovery Partition), and a domain name, here are the steps, apparently all of which must be more-or-less strictly followed in this order.
DVD>Disk Utility>Erase Disk [or Recovery Partition>Disk Utility>Erase Partition]
DVD>Install Lion
Reboot, hopefully Lion install kicks in
Update, update, update Lion (NOT Lion Server yet) until no more updates
System Preferences>Network>Static IP on the LAN (say 10.0.1.2) and Computer name ("server" is a good standbye)
Terminal>$ sudo scutil --set HostName server.domain.com
App Store>Install Lion Server and run through the Setup
Download install Server Admin Tools, then update, update, update until no more updates
Server Admin>DNS>Zones [IF THIS WASN'T AUTOMAGICALLY CREATED (mine wasn't): Add zone domain.com with Nameserver "server.domain.com." (that's a FQDN terminated with a period) and a Mail Exchanger (MX record) "server.domain.com." with priority 10. Add Record>Add Machine (A record) server.domain.com pointing to the server's static IP. You can add fancier DNS aliases and a simpler MX record below after you get through the crucial steps.]
System Prefs>Network>Advanced>Set your DNS server to 127.0.0.1
A few DNS set-up steps and these most important steps:
A. Check that the Unix command "hostname" returns the correct hostname and you can see this hostname in Server.app>Hardware>Network
B. Check that DNS works: the unix commands "host server.domain.com" and "host 10.0.1.2" (assuming that that's your static IP) should point to each other. Do not proceed until DNS works.
C. Get Apple Push Notification Services CA via Server.app>Hardware>Settings><Click toggle, Edit... get a new cert ...>
D. Server.app>Profile Manager>Configure... [Magic script should create OD Master, signed SSL cert]
E. Server.app>Hardware>Settings>SSL Certificate> [Check to make sure it's set to the one just created]
F. Using Server.app, turn on the web, then Server.app>Profile Manager> [Click on hyperlink to get to web page, e.g. server.domain.com/profilemanager] Upper RHS pull-down, install Trust Profile
G. Keychain Access>System>Certificates [Find the automatically generated cert "Domain", the one that is a "Root certificate authority", Highlight and Export as .cer, email to all iOS devices, and click on the authority on the device. It should be entered as a trusted CA on all iOS devices. While you're at it, highlight and Export... as a .cer the certificate "IntermediateCA_SERVER.DOMAIN.COM_1", which is listed an an "Intermediate CA" -- you will use this to establish secure SSL connections with remote browsers hitting your server.]
H. iOS on LAN: browse to server.domain.com/mydevices> [click on LHS Install trust cert, then RHS Enroll device.
I. Test from web browser server.domain.com/mydevices: Lock Device to test
J. ??? Profit
12. Server Admin>DNS>Zones> Add convenient DNS alias records if necessary, e.g., mail.domain.com, smtp.domain.com, www.domain.com. If you want to refer to your box using the convenient shorthand "domain.com", you must enter the A record (NOT alias) "domain.com." FQDN pointing to the server's fixed IP. You can also enter the convenient short MX record "domain.com." with priority 11. This will all work on the LAN -- all these settings must be mirrored on the outside internet using the service from which you registered domain.com.
You are now ready to begin turning on your services. Here are a few important details and gotchas setting up cloud services.
Firewall
Server Admin>Firewall>Services> Open up all ports needed by whichever services you want to run and set up your router (assuming that your server sits behind a router) to port forward these ports to your router's LAN IP. This is most a straightforward exercise in grepping for the correct ports on this page, but there are several jaw-droppingly undocumented omissions of crucial ports for Push Services and Device Enrollment. If you want to enroll your iOS devices, make sure port 1640 is open. If you want Push Notifications to work (you do), then ports 2195, 2196, 5218, and 5223 must be open. The Unix commands "lsof -i :5218" and "nmap -p 5218 server.domain.com" (nmap available from Macports after installing Xcode from the App Store) help show which ports are open.
SSH
Do this with strong security. Server.app to turn on remote logins (open port 22), but edit /etc/sshd_config to turn off root and password logins.
PermitRootLogin no
PasswordAuthentication no
ChallengeResponseAuthentication no
I'm note sure if toggling the Allow remote logins will load this config file or, run "sudo launchctl unload -w /System/Library/LaunchAgents/org.openbsd.ssh-agent.plist ; sudo launchctl load -w /System/Library/LaunchAgents/org.openbsd.ssh-agent.plist" to restart the server's ssh daemon.
Then use ssh-keygen on remote client to generate public/private keys that can be used to remotely login to the server.
client$ ssh-keygen -t rsa -b 2048 -C client_name
[Securely copy ~/.ssh/id_rsa.pub from client to server.]
server$ cat id_rsa.pub > ~/.ssh/known_hosts
I also like DenyHosts, which emails detected ssh attacks to [email protected]. It's amazing how many ssh attacks there are on any open port 22. Not really an added security feature if you've turned off password logins, but good to monitor. Here's a Lion Server diff for the config file /usr/share/denyhosts:
$ diff denyhosts.cfg-dist denyhosts.cfg
12c12
< SECURE_LOG = /var/log/secure
> #SECURE_LOG = /var/log/secure
22a23
> SECURE_LOG = /var/log/secure.log
34c35
< HOSTS_DENY = /etc/hosts.deny
> #HOSTS_DENY = /etc/hosts.deny
40a42,44
> #
> # Mac OS X Lion Server
> HOSTS_DENY = /private/etc/hosts.deny
195c199
< LOCK_FILE = /var/lock/subsys/denyhosts
> #LOCK_FILE = /var/lock/subsys/denyhosts
202a207,208
> LOCK_FILE = /var/denyhosts/denyhosts.pid
> #
219c225
< ADMIN_EMAIL =
> ADMIN_EMAIL = [email protected]
286c292
< #SYSLOG_REPORT=YES
> SYSLOG_REPORT=YES
Network Accounts
User Server.app to create your network accounts; do not use Workgroup Manager. If you use Workgroup Manager, as I did, then your accounts will not have email addresses specified and iCal Server WILL NOT COMPLETELY WORK. Well, at least collaboration through network accounts will be handled clunkily through email, not automatically as they should. If you create a network account using Workgroup Manager, then edit that account using Server.app to specify the email to which iCal invitations may be sent. Server.app doesn't say anything about this, but that's one thing that email address entry is used for. This still isn't quite solid on Lion Server, as my Open Directory logs on a freshly installed Lion Server are filled with errors that read:
2011-12-12 15:05:52.425 EST - Module: SystemCache - Misconfiguration detected in hash 'Kerberos':
     User 'uname' (/LDAPv3/127.0.0.1) - ID 1031 - UUID 98B4DF30-09CF-42F1-6C31-9D55FE4A0812 - SID S-0-8-83-8930552043-0845248631-7065481045-9092
Oh well.
Email
Email aliases are handled with the file /private/etc/postfix/aliases. Do something like this
root:           myname
admin:          myname
sysadmin:       myname
certadmin:      myname
webmaster:      myname
my_alternate:   myname
Then run "sudo newaliases". If your ISP is Comcast or some other large provider, you probably must proxy your outgoing mail through their SMTP servers to avoid being blocked as a spammer (a lot of SMTP servers will block email from Comcast/whatever IP addresses that isn't sent by Comcast). Use Server.app>Mail to enter your account information. Even then, the Lion Server default setup may fail using this proxy. I had to do this with the file /private/etc/postfix/main.cf:
cd /etc/postfix
sudo cp ./main.cf ./main.cf.no_smtp_sasl_security_options
sudo echo 'smtp_sasl_security_options = noanonymous' >> ./main.cf
sudo serveradmin stop mail
sudo serveradmin start mail
Finally, make sure that you're running a blacklisting srevice yourself! Server Admin>Mail>Filter> Use spamhaus.org as a blacklister. Finally, set up mail to use strong Kerberos/MD5 settings under on Server Admin>Mail>Advanced. Turn off password and clear logins. The settings should be set to "Use" your SSL cert, NOT "Require". "Require" consistently breaks things for me.
If you already installed the server's Trust Certificate as described above (and opened up the correct ports), email to your account should be pushed out to all clients.
iCal Server
Server.app>Calendar>Turn ON and Allow Email Invitations, Edit... . Whatever you do, do NOT enter your own email account information in this GUI. You must enter the account information for local user com.apple.calendarserver, and the password for this account, which is stored in the System keychain: Keychain Access>System> Item com.apple.servermgr_calendar. Double-click and Show Password, copy and paste into Server.app dialog. This is all described in depth here. If you enter your own account information here (DO NOT!), the iCal Server will delete all Emails in your Inbox just as soon as it reads them, exactly like it works for user com.apple.calendarserver. Believe me, you don't want to discover this "feature", which I expect will be more tightly controlled in some future update.
Web
The functionality of Server.app's Web management is pretty limited and awful, but a few changes to the file /etc/apache2/httpd.conf will give you a pretty capable and flexible web server, just one that you must manage by hand. Here's a diff for httpd.conf:
$ diff httpd.conf.default httpd.conf
95c95
< #LoadModule ssl_module libexec/apache2/mod_ssl.so
> LoadModule ssl_module libexec/apache2/mod_ssl.so
111c111
< #LoadModule php5_module libexec/apache2/libphp5.so
> LoadModule php5_module libexec/apache2/libphp5.so
139,140c139,140
< #LoadModule auth_digest_apple_module libexec/apache2/mod_auth_digest_apple.so
< #LoadModule encoding_module libexec/apache2/mod_encoding.so
> LoadModule auth_digest_apple_module libexec/apache2/mod_auth_digest_apple.so
> LoadModule encoding_module libexec/apache2/mod_encoding.so
146c146
< #LoadModule xsendfile_module libexec/apache2/mod_xsendfile.so
> LoadModule xsendfile_module libexec/apache2/mod_xsendfile.so
177c177
< ServerAdmin [email protected]
> ServerAdmin [email protected]
186c186
< #ServerName www.example.com:80
> ServerName domain.com:443
677a678,680
> # Server-specific configuration
> # sudo apachectl -D WEBSERVICE_ON -D MACOSXSERVER -k restart
> Include /etc/apache2/mydomain/*.conf
I did "sudo mkdir /etc/apache2/mydomain" and add specific config files for various web pages to host. For example, here's a config file that will host the entire contents of an EyeTV DVR, all password controlled with htdigest ("htdigest ~uname/.htdigest EyeTV uname"). Browsing to https://server.domain.com/eyetv points to /Users/uname/Sites/EyeTV, in which there's an index.php script that can read and display the EyeTV archive at https://server.domain.com/eyetv_archive. If you want Apache username accounts with twiddles as in https://server.domain.com/~uname, specify "UserDir Sites" in the configuration file.
Alias /eyetv /Users/uname/Sites/EyeTV
<Directory "/Users/uname/Sites/EyeTV">
    AuthType Digest
    AuthName "EyeTV"
    AuthUserFile /Users/uname/.htdigest
    AuthGroupFile /dev/null
    Require user uname
    Options Indexes MultiViews
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>
Alias /eyetv_archive "/Volumes/Macintosh HD2/Documents/EyeTV Archive"
<Directory "/Volumes/Macintosh HD2/Documents/EyeTV Archive">
    AuthType Digest
    AuthName "EyeTV"
    AuthUserFile /Users/uname/.htdigest
    AuthGroupFile /dev/null
    Require user uname
    Options Indexes MultiViews
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>
I think you can turn Web off/on in Server.app to relaunch apached, or simply "sudo apachectl -D WEBSERVICE_ON -D MACOSXSERVER -k restart".
Securely copy to all desired remote clients the file IntermediateCA_SERVER.DOMAIN.COM_1.cer, which you exported from System Keychain above. Add this certificate to your remote keychain and trust it, allowing secure connections between remote clients and your server. Also on remote clients: Firefox>Advanced>Encryption>View Certificates>Authorities>Import...> Import this certificate into your browser. Now there should be a secure connection to https://server.domain.com without any SSL warnings.
One caveat is that there should be a nice way to establish secure SSL to https://domain.com and https://www.domain.com, but the automagically created SSL certificate only knows about server.domain.com. I attempted to follow this advice when I originally created the cert and add these additional domains (under "Subject Alternate Name Extension"), but the cert creation UI failed when I did this, so I just gave up. I hope that by the time these certs expire, someone posts some documentation on how to manage and change Lion Server SSL scripts AFTER the server has been promoted to an Open Directory Master. In the meantime, it would be much appreciated if anyone can post either how to add these additional domain names to the existing cert, or generate and/or sign a cert with a self-created Keychain Access root certificate authority. In my experience, any attempt to mess with the SSL certs automatically generated just breaks Lion Server.
Finally, if you don't want a little Apple logo as your web page icon, create your own 16×16 PNG and copy it to the file /Library/Server/Web/Data/Sites/Default/favicon.ico. And request that all web-crawling robots go away with the file /Library/Server/Web/Data/Sites/Default/robots.txt:
User-agent: *
Disallow: /
Misc
VNC easily works with iOS devices -- use a good passphrase. Edit /System/Library/LaunchDaemons/org.postgresql.postgres.plist and set "listen_addresses=127.0.0.1" to allow PostgreSQL connections over localhost. I've also downloaded snort/base/swatch to build an intrusion detection system, and used Macports's squid+privoxy to build a privacy-enhanced ad-blocking proxy server.

Privacy Enhancing Filtering Proxy and SSH Tunnel
Lion Server comes with its own web proxy, but chaining Squid and Privoxy together provides a capable and effective web proxy that can block ads and malicious scripts, and conceal information used to track you around the web. I've posted a simple way to build and use a privacy enhancing web proxy here. While you're at it, configure your OS and browsers to block Adobe Flash cookies and block Flash access to your camera, microphone, and peer networks. Read this WSJ article series to understand how this impacts your privacy. If you configure it to allow use for anyone on your LAN, be sure to open up ports 3128, 8118, and 8123 on your firewall.
If you've set up ssh and/or VPN as above, you can securely tunnel in to your proxy from anywhere. The syntax for ssh tunnels is a little obscure, so I wrote a little ssh tunnel script with a simpler flexible syntax. This script also allows secure tunnels to other services like VNC (port 5900). If you save this to a file ./ssht (and chmod a+x ./ssht), example syntax to establish an ssh tunnel through localhost:8080 (or, e.g., localhost:5901 for secure VNC Screen Sharing connects) looks like:
$ ./ssht 8080:[email protected]:3128
$ ./ssht 8080:alice@:
$ ./ssht 8080:
$ ./ssht 8018::8123
$ ./ssht 5901::5900 [Use the address localhost:5901 for secure VNC connects using OS X's Screen Sharing or Chicken of the VNC (sudo port install cotvnc)]
$ vi ./ssht
#!/bin/sh
# SSH tunnel to squid/whatever proxy: ssht [-p ssh_port] [localhost_port:][user_name@][ip_address][:remotehost][:remote_port]
USERNAME_DEFAULT=username
HOSTNAME_DEFAULT=domain.com
SSHPORT_DEFAULT=22
# SSH port forwarding specs, e.g. 8080:localhost:3128
LOCALHOSTPORT_DEFAULT=8080      # Default is http proxy 8080
REMOTEHOST_DEFAULT=localhost    # Default is localhost
REMOTEPORT_DEFAULT=3128         # Default is Squid port
# Parse ssh port and tunnel details if specified
SSHPORT=$SSHPORT_DEFAULT
TUNNEL_DETAILS=$LOCALHOSTPORT_DEFAULT:$USERNAME_DEFAULT@$HOSTNAME_DEFAULT:$REMOT EHOST_DEFAULT:$REMOTEPORT_DEFAULT
while [ "$1" != "" ]
do
case $1
in
    -p) shift;                  # -p option
        SSHPORT=$1;
        shift;;
     *) TUNNEL_DETAILS=$1;      # 1st argument option
        shift;;
esac
done
# Get local and remote ports, username, and hostname from the command line argument: localhost_port:user_name@ip_address:remote_host:remote_port
shopt -s extglob                        # needed for +(pattern) syntax; man sh
LOCALHOSTPORT=$LOCALHOSTPORT_DEFAULT
USERNAME=$USERNAME_DEFAULT
HOSTNAME=$HOSTNAME_DEFAULT
REMOTEHOST=$REMOTEHOST_DEFAULT
REMOTEPORT=$REMOTEPORT_DEFAULT
# LOCALHOSTPORT
CDR=${TUNNEL_DETAILS#+([0-9]):}         # delete shortest leading +([0-9]):
CAR=${TUNNEL_DETAILS%%$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR%:}                            # delete :
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    LOCALHOSTPORT=$CAR
fi
TUNNEL_DETAILS=$CDR
# REMOTEPORT
CDR=${TUNNEL_DETAILS%:+([0-9])}         # delete shortest trailing :+([0-9])
CAR=${TUNNEL_DETAILS##$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR#:}                            # delete :
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    REMOTEPORT=$CAR
fi
TUNNEL_DETAILS=$CDR
# REMOTEHOST
CDR=${TUNNEL_DETAILS%:*}                # delete shortest trailing :*
CAR=${TUNNEL_DETAILS##$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR#:}                            # delete :
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    REMOTEHOST=$CAR
fi
TUNNEL_DETAILS=$CDR
# USERNAME
CDR=${TUNNEL_DETAILS#*@}                # delete shortest leading +([0-9]):
CAR=${TUNNEL_DETAILS%%$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR%@}                            # delete @
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    USERNAME=$CAR
fi
TUNNEL_DETAILS=$CDR
# HOSTNAME
HOSTNAME=$TUNNEL_DETAILS
if [ "$HOSTNAME" == "" ]                # no hostname given
then
    HOSTNAME=$HOSTNAME_DEFAULT
fi
ssh -p $SSHPORT -L $LOCALHOSTPORT:$REMOTEHOST:$REMOTEPORT -l $USERNAME $HOSTNAME -f -C -q -N \
    && echo "SSH tunnel established via $LOCALHOSTPORT:$REMOTEHOST:$REMOTEPORT\n\tto $USERNAME@$HOSTNAME:$SSHPORT." \
    || echo "SSH tunnel FAIL."

Possible to install clustered SAP solution on server with existing system?

Hello all,
I would like to know whether it is possible to install a clustered SAP
system (Windows2003/SQLServer2005 using MSCS) where the main MSCS node of the cluster already has a pre-existing Central SAP system (not clustered).
I believe that this would mean having to create /usr/sap (sapmnt)
twice, because there is already a sapmnt existing on a local drive for
the system that is already installed. For the cluster install, a new
sapmnt would be required on one of the shared storage disks so that it
could failover if the server crashed.
Is this scenario possible, and if so how do you get around having
multiple sapmnts? Do you have to move the sapmnt from system to system depending on which one you are working with (eg. when starting up)?
Does anyone have such a scenario?
Thanks in advance for any assistance......

no, it is not possible and is not supported
for supported scenarios see <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">this document</a>

Is it possible to install audio module on SGD Server with no audio driver?

Though not listed as a hardware requirement, it would appear that I can't install the audio module on the SGD server that doesn't have a sound card and driver. We need to support audio to remote clients. So, I wouldn't have expected to need audio drivers on the server. Does anyone know if there is a way to install the audio module for SGD 4.41 on Solaris 10 without audio hardware?

Your mid-2010 Intel iMac does not have a Thunderbolt port.
http://support.apple.com/kb/HT5219?viewlocale=en_US#3
Perhaps you are confusing Thunderbolt with something else? If you're talking about a different computer, I doubt you would have a "not connected" Thunderbolt port. There is no such thing as a Thunderbolt driver. There are drivers for devices (like your Promise Pegasus R6), but Thunderbolt isn't a device. It's a communication interface.

Installing ODBC Drivers on a Server with multiple users.

We are trying to install ODBC drivers on our web server and want to know what is the minimum we can install and be able to add a DSN through the MS ODBC Administrator. This is a server that is used by multiple companies and we do not want to do something that will affect them.
The oracle installation does not warn you when it overwrites existing files, which is why we cannot simply install everything. For example, on my test machine it trashed the Java installation without asking or telling me. I discovered it this morning when I tried to go to a site that uses Java. That was a low risk on the SQL server, because we did not have Java installed. Other elements, though, cannot be risked in that fashion. We have to find out what files are required in order to solve the problem.
The oracle installation does not warn you when it overwrites existing files, which is why we cannot simply install everything. For example, on my test machine it trashed the Java installation without asking or telling me. I discovered it this morning when I tried to go to a site that uses Java. That was a low risk on the SQL server, because we did not have Java installed. Other elements, though, cannot be risked in that fashion. We have to find out what files are required in order to solve the problem.
Version 9i on a Windows 2003 Server.

1) I’m not certain about the overwrite vs separate machine. What happened is that it installed its own Java, which was much older than the Java previously installed. Following the oracle installation, internet explorer was no longer able to find Java at all, prompting for a new Java installation. During the installation, no mention was made of the changes that were being made.
2) Each company has its own account on our server, its own instance of the database, etc. nowhere in the oracle release notes or the installer could I find anything that provided for a user-limited installation: it was global. Even though the oracle installation suggested, and I accepted, unique folders for its installation targets, the problems mentioned occurred. The web server it wants to install is not possible to be user-limited: it wanted to take over http for the machine.

How to install Apex on small business server with IIS already installed?

I am building an Oracle Application Express application for a small not-for-profit and they only have a single small business server that is already running the microsoft IIS server. Can I install the Oracle Http server and run both the Oracle and IIS on the same mahine?

Can I install the Oracle Http server and run both the Oracle and IIS on the same mahine?Absolutely. I'm running Oracle HTTP Server, Tomcat, and IIS on my laptop. Just make sure you don't have port conflicts and you should be problem free.
- Mark

Weblogic server with Websphere Portal server

Hi,
I am having this peculiar problem.
I am using Websphere Portal Server and accessing an application which is running
on Weblogic
6.1. I am also using struts on both the portal server and weblogic server.
The first time I access a jsp which is on weblogic from websphere portal I get
it fine.
I have button on this jsp on submit of which another jsp on weblogic should come
up.
The problem is that on click of the button the URL which is being formed is
<ip of weblogic>/<path of portal server>.
I have no clue why this is happening and its driving me crazy.
Can anyone tell me whats happening?
Thanks
Siri

Siri-
This sounds like a URL rewriting issue with whatever proxy or tool you are using
to interface from WS to WLS. Basically, for the setup to work, any URL's that
are contained in the content served up by your WLS instance will have to be rewritten
such that your WS instance knows that the request is actually intended for the
WLS server.
-Brodi
"Siri" <[email protected]> wrote:
>
Hi,
I am having this peculiar problem.
I am using Websphere Portal Server and accessing an application which
is running
on Weblogic
6.1. I am also using struts on both the portal server and weblogic server.
The first time I access a jsp which is on weblogic from websphere portal
I get
it fine.
I have button on this jsp on submit of which another jsp on weblogic
should come
up.
The problem is that on click of the button the URL which is being formed
is
<ip of weblogic>/<path of portal server>.
I have no clue why this is happening and its driving me crazy.
Can anyone tell me whats happening?
Thanks
Siri

How to configure Content server with Oracle Portal

I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
OS environment is Windows XP SP3.
Database server is Oracle 10gR2

Hi
"I need to configure Content server to work with UCM." - I am not clear on this .
UCM is content server .
Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
Hope this helps .
Thanks
Srinath

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

Use a SQL 2012 database server with Reporting Services 2008?

Hello, we have a SQL Server 2008 R2 Reporting Services Standard server with the reporting databases running on a SQL Server 2008 Standard database server. I would like to upgrade the database server to SQL Server 2012 before I upgrade the reporting server.
Can I run SQL Server 2008 R2 Reporting Services against a 2008-version database running on a SQL 2012 database server? Thanks for your help.

Hi Nicole
Thanks for your posting.
Are you asking if we can connect from SSRS 2008 r2 to a database sitting on SQL Server 2012. Am I right?, please ignore me if I misunderstood your question. If that is your question
then I think you will be able to using BIDS 2008, I have created A database on SQL Server 2012 and I use that database table inside my SSRS 2008 R2 dataset. I can even think that you can use a database of compatibility level of 2012(110) as well
Many thanks
Syed Qazafi Anjum

Installing FIM Reporting in Productrion Server with mutilple portal

Similar Messages

Maybe you are looking for