Installing Form, Reports 11g

For the Last few weeks i have been reading all the documents on the internet,
so i at last became able to
install Oracle Databse 11g
install RCU /installing Schemas, all of it,
installling weblogic 1033
using identity Managment installed OID etc
identity manager didn't gave any error
when prompted at last to Portal Forms, Reports and discoverer
just strucked at providing "Specify OID informtion" hostname,portnumber etc
identity manager summary show port number 3131,3060,password and user name are also correct,
but pressing 'next' gives me error message "Verify Credentials, Make sure hostname,port number, password are correct"?
Kindly someone,

i did it somhow,
deselecting portal and
select forms, reports only
then skip the specification screen of OID,
installed firefox 5.0.1 and jre 6u27, run test.fmb which was in forms folder,
but it do not run any other FMB it gives a TNS error?
Kindly someone,
Edited by: kashif, pakistan on Oct 3, 2011 12:37 PM

Similar Messages

  • While install forms&report 11g

    dear sirs, pls tell me how to know the host name of Oracle internet directory, and also the port number and user name

    You have to ask the guy who install Oracle internet directory.
    Regards

  • Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)

    Hi All;
    can install & configure forms & reports 11g on windows xp sp2 (32-bit)
    regards

    Yes, Oracle Fusion Middleware (Forms/Reports) 11g is certified for Windows XP. Check out Oracle Fustion Middleware Supported System Configuations for more information.
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Can on one domain coexist managed servers for ADF11g and Forms&Reports 11g

    Is it possible on one Weblogic Domain to exist both Managed server for ADF 11g and Managed servers for Forms 11g and Reports 11g?
    How to install on one Weblogic server these two things? Is it possible and what is recommended in this case?
    Thnx in advance!

    Hi Rade,
    Yes, i think it is possible. In my case I have one Weblogic Server Domain with 3 Managed Server,one for deploy application and the others are the Forms & Reports 11g.
    For that you have to install Fusion Middlware 11g.
    For ADF 11g i think you have to install Oracle Fusion Application.
    Edit:
    Please read the note: Installing ADF 11.1.1.3 Runtime into WebLogic 11gR1 Patchset 2 (10.3.3) [ID 1094153.1]
    Hope this help
    Regards
    Edited by: scapy on 6/Out/2011 3:14

  • Install Form & Report 11.1.2.0.0 with Weblogic 10.3.5 64 bits == ERROR

    Hello, i try install Forms Report in a new windows 2008 R2 Server but send error.
    the steps are:
    Step 1. Install Windows server 2008 R2 Foundation 64x.
    Step 2. Download and Install JDK Jdk-6u31-windows-x64.exe.
    Step 3. Download and Install Weblogic 10.3.5 64 bits with java -Xmx1024m - jar wls1035_generic.jar
    Step 4. Don't execute quickstart.
    Step 5. Download and Install Forms & Report ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1, run Setup
    Step 6. select "Install and configure"
    Step 7. select "configure for deployment"
    Step 8. Create Domain
    Step 9. Select "Forms Builder" and "Reports Builder".
    Step 10. Automatic Port = yes
    Step 11. Proxy = no
    Step 12. OID = no
    Install = 100% OK
    Configuration --> ERROR in "Configuring OCM", next click "Continue"
    All next configuration are OK
    please someone can help me, your help is greatly appreciated
    Thank you very much
    Carlos

    Hi, Norbert
    Thank for your excellent help to the point.
    All work well.
    *1.- opmnctl status -l*
    H:\Oracle\Middleware\asinst_1\bin>opmnctl status -l
    Processes in Instance: asinst_1
    -----------------------------+------
    ias-component | process-type | pid | status |
    uid | memused | uptime | ports
    -----------------------------+------
    emagent_asinst_1 | EMAGENT | 5652 | Alive | 161
    0552159 | 13752 | 0:11:25 | N/A
    RptSvr_COBROTECH-SRV_asinst_1 | ReportsServerComp~ | 5820 | Alive | 161
    0552158 | 112664 | 0:11:41 | N/A
    ohs1 | OHS | 4588 | Alive | 161
    0552157 | 23252 | 0:13:15 | https:8889,https:8890,http:8888
    *2.- Java*
    H:\Oracle\Middleware\asinst_1\bin>java -version
    java version "1.6.0_26"
    Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
    Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode)
    all other works fine
    the OraInstall2012-03-05-12xxx.err include:
    oracle.sysman.oii.oiit.OiitTargetLockNotAvailableException: OUI-10022: El área de destino C:\Program Files\Oracle\Inventory no se puede utilizar porque su estado no es válido.
         at oracle.sysman.oii.oiit.OiitTargetLocker.createLocksDir(OiitTargetLocker.java:1033)
         at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:207)
         at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:185)
         at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:172)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.acquireLocks(OiicStandardInventorySession.java:403)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:301)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
         at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
         at oracle.as.install.engine.modules.install.util.InstallUtils.createInventorySession(InstallUtils.java:443)
         at oracle.as.install.engine.modules.install.util.InstallUtils.setAdditionalOracleHomeProperty(InstallUtils.java:329)
         at oracle.as.install.classic.installaction.ClassicInstallAction.executeAfterCopy(ClassicInstallAction.java:250)
         at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteAfterCopy(InstallActionProviderUtility.java:93)
         at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.executeEvent(ModifiedDWizard.java:2948)
         at oracle.as.install.engine.modules.presentation.PresentationModule.processModuleEvent(PresentationModule.java:655)
         at oracle.as.install.engine.modules.util.PartnerModuleImpl.processEvent(PartnerModuleImpl.java:118)
         at oracle.as.install.engine.InstallEngine.notifyListeners(InstallEngine.java:626)
         at oracle.as.install.engine.InstallEngine.processEvent(InstallEngine.java:584)
         at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyAllEventListenersHelper(PartnerModuleImpl.java:227)
         at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyListeners(PartnerModuleImpl.java:158)
         at oracle.as.install.engine.modules.install.InstallModule.onSuccess(InstallModule.java:478)
         at oracle.as.install.engine.modules.install.action.InstallManager.notifySuccess(InstallManager.java:322)
         at oracle.as.install.engine.modules.install.command.InstallSuccessCommand.execute(InstallSuccessCommand.java:42)
         at oracle.as.install.engine.modules.install.action.InstallManager.onInstallEvent(InstallManager.java:334)
         at oracle.as.install.engine.modules.install.action.AbstractOUIHandler.fireInstallEvent(AbstractOUIHandler.java:147)
         at oracle.as.install.engine.modules.install.action.OUIInstaller.succeed(OUIInstaller.java:542)
         at oracle.as.install.engine.modules.install.action.OUIInstaller.start(OUIInstaller.java:480)
         at oracle.as.install.engine.modules.install.action.InstallManager.launchOUI(InstallManager.java:212)
         at oracle.as.install.engine.modules.install.InstallModule.launchOUI(InstallModule.java:155)
         at oracle.as.install.engine.modules.install.InstallModule$1.run(InstallModule.java:246)
    Form and Report Builder.
    in H:\Oracle\Middleware\Oracle_FRHome1\bin
    frmbld , start and load example form ok
    rwbiulder send "REP-50125: rwbuilder.conf:java.lang.NullPointerException"
    have any idea how fix report builder error?
    Thank you very much for your invaluable help.
    Carlos

  • Fusion Middleware - Installing Forms & Reports Developer in separate server

    Hi,
    I installed Forms & Reports Server (without developer tools) on one server. Now I want to install only Forms and Reports developer in another server. Can anybody tell me how to achieve this or from where I can get some reference document particularly for this task?

    you could set the working directory of your formsweb.cfg entry to another path;
    e.g.:
    [test_config]
    workingDirectory=d:\devworkspace\forms
    where d:\devworkspace\forms is the directory where your fmx/plx/mmx are located
    if you have also own .jar files in use, you could also put them into another directory, and access them in the formsweb.cfg via an aliasmatch:
    archive=frmall.jar,../my_aliasmatch/my_jar_file1.jar,../my_aliasmatch/my_jar_file2.jar
    and in the httpd.conf (OAS_HOME/Apache/Apache/conf/httpd.conf)
    add a line like this:
    AliasMatch ^/forms/my_aliasmatch/(..*) "d:\devworkspace\java/$1"
    where d:\devworkspace\java is the directory where your jar files are located.
    and restart Apache.
    for productional use you can also create a different config with a different workdir and a different aliasmatch.
    the reports can also be located anywhere; just set the workdir and cachedir of your testreportsserver to a location where your reports are located.
    regards
    Christian

  • Broswer close/raise exception after installing Forms/Report Services

    Hi,
    I have iDS10g R2 recently I have installed Form/report Services(AS) 10g R2 but when I try to open a default/test page on one PC is raise Java exception
    Java.lang.classnotFoundexception Oracle.forms.engine.main
    and on Second PC browser close automatically without any exception(with Forms/Report Services 10gR2 I have Jinitiator1.3.1.22, someone plz help me.
    Many Thanks
    Khawar
    Message was edited by:
    S. Khawar

    Hi,
    the message means that it acclot access frmall.jar, containing the Forms client Java files. Did you perform a fresh install and the run the default demo form ?
    Frank

  • Installing Forms&Report  Services with Oracle Application Server 10g Rel 3

    Can I Install Forms & Report Services with Oracle Application Server 10g Release 3 some how?
    I am thinking of installing Forms & Reports Services in separate home with Oracle Application Server 10g Rel 3.
    Does any body has any different idea so that they both can run more smoothly together.
    Thanks
    Raj
    www.oraclebrains.com

    They WILL NOT RUN TOGETHER. We have discussed this many times before. They must be in separate homes.
    Check the search function for this forum to find the previous discussions.

  • Installing Oracle Fusion Middleware (Forms/Reports) 11g on windows 2012 x64

    Hi All,
    I'm planning to install oracle fusion middleware 11g (forms/reports) on windows 2012 64 bit.
    Once i started the installation of weblog server 10.3.6 it went fine without any error at this stage.
    In second stage i tried to configure it, but in the configuration process "*Creating Domain*" is getting failed.
    Placed some sample message below from the log file.
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(CREATE_DOMAIN) to:false. Value obtained from:USER
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXTEND_DOMAIN) to:false. Value obtained from:USER
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXPAND_CLUSTER) to:false. Value obtained from:USER
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid:
    [ecid: 0000KOYolfhCWr^pxSP5iW1JVQQa000003,0] Adding Element:CREATE_DOMAIN_ID for writing.
    Any help in the regard will be greatly appreciated.
    Thanks
    Syed

    Hi,
    1)As per certification matrix Forms and Reports 11.1.1.7.0 is supported on Windows 2012.
       So in order to install Forms and Reports you need to first install the Forms and Reports software binaries then need to run the config.sh command from %ORACLE_HOME%/bin.
       No need to create any domain using the config.sh from Weblogic home.
    2)Please see if the below prerequisites were met :-
       . Assign Proper ip, hostname & domain name
      . Entry of ip, host name & domain name in etc/hosts file
      . Disable anti-virus if any
      . Disable ipv6, a
      . Disable Windows Firewall, Windows Update & Windows Management Instrumentation at Service level (services.msc)
      . Create 2 folder "tmp" & "Java" for temp, jdk & jre installation. And set the path of installed jdk in Environment Variable
    Regards,
    Prakash.

  • Install oracle forms / report 11g

    I am try to install Oracle Forms and Reports 11gR2 (11.1.2.1.0)
    I wish to know with version of weblogic server
    i must install to be work with this version of Forms / Report
    Work with
    WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package     ???
    Thank you

    Hi
    please reference to certificate matrix as the following :
    http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls

  • Error installing Forms/Reports Server on linux m/c having EBS R12 installed

    Hi,
    We are trying to install Forms and Reports server (Oracle Application Server 10gR2 (10.1.2.0.2) Forms and Reports Services) on a linux x86 box. The box already has Oracle E-business Suite R12 running on it. Our end goal is to install Oracle Transport Management (OTM), which requires Oracle Forms and Reports server to run its reports. When installing Forms and Report server I am getting following error. During installation, I gave a different set of ports to be used by Oracle Forms/Reports Apps server (and not the default) in staticports.ini and ensured that those ports are available. Any idea what could be the issue. If the issue is due to port conflict, how do I find which is the conflicting port. Also, is it possible to re-use Oracle Applications' Forms/Reports server for other applications like OTM.
    Get the following error during installation of Oracle Application Server 10gR2 (10.1.2.0.2) Forms and Reports Services:
    . Please also check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    * permissions on files
    * file contention issues on Windows NT
    * internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
    Resolution:
    Base Exception:
    java.net.BindException
    Address already in use
    java.net.BindException: Address already in use
    at java.net.PlainSocketImpl.socketBind(Native Method)
    at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
    at java.net.Socket.bind(Socket.java:498)
    at java.net.Socket.<init>(Socket.java:307)
    at java.net.Socket.<init>(Socket.java:124)
    at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
    at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
    at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.sendHTTPRequest(Unknown Source)
    at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getOpmnProcStatus(Unknown Source)
    at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getProcessStatus(Unknown Source)
    at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getComponentProcessStatus(Unknown Source)
    I do now have much experience on DBA side, so my question may be very basic, but pls bear with me.
    Thanks.
    Namit

    So ...
    After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
    With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
    Regards
    Bruno Palma

  • Install Forms & Reports Services into existing home?

    I have a server with Oracle Database 10G R2 installed. I also installed the Web Server from the companion CD into its own home to use for APEX.
    Now, I want to install Forms and Reports services. Can I use the same "html" home that I used for the web server before?
    Or should I uninstall the previous web server, install Forms and Reports services and then redo the dad and image directory for APEX?
    Thanks,
    Chad

    Jacco,
    Thanks. I got everything up and running together. Though, I did have to add a port on the AS Control page for Apex, but other then that...no trouble.
    Thanks again,
    Chad

  • Illegal semicolon send email weblogic forms reports 11g

    I have a form that send parameters to a report and buld it on pdf format, then the same is sent by email to the address from the database,
    I got this error and I need your help.
    I really appreciate.
    My configuration:
    Weblogic server 10.3.4
    Forms & Reports 11.1.1.4
    OS. Oracle Enterprise Linux (OEL 5.5)
    thanks.
    this is the error shown in the log file located in:
    FMW_HOME/INSTANCE_HOME/diagnostics/logs/ReportsServerComponent/ReportsServer_Name/rwserver_diagnostic.log
    [2012-02-13T22:33:12.384-06:00] [reports] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 18] [ecid: 004i8xiSn1mF8DWFLzjO8A0000nT00001u,0:1:0x5f5e101:100000002] [URI: /reports/rwservlet/getjobid838]
    REP-50152 : Se ha producido un error al enviar el correo: Illegal semicolon, not in group. [[
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
         at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
         at oracle.reports.server.MailService.send(MailService.java:588)
         at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
         at oracle.reports.server.Destination.send(Destination.java:578)
         at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
         at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2761)
         at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
         at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
         at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
         at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
         at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
         at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
         at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
         at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
         at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
    ]]

    I got the answer,
    The problem was that I have email addresses saved on a table as '[email protected]; [email protected]' and it needs to be a colon. ','

  • ERROR FRM-41214 weblogic 10.3 + forms + reports 11g

    when I try to generate a report, I get this error: FRM-41214
    and I checkthe log file locate on /oracle/Midleware/asinst_1/diagnostics/logs/ReportsServerComponent/my_ReportsServer/rwEng-0_diagnostic.log
    and I found the last lines:
    [2011-11-29T16:36:20.429-06:00] [reports] [NOTIFICATION] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002,0] [EngineName: rwEng-0] EngineImpl:run oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    [2011-11-29T16:37:07.306-06:00] [reports] [ERROR] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002,0] [EngineName: rwEng-0] rwfdt:rwfdtprint Job ID = 143 ERR Error occurred sending Job output to cache
    [2011-11-29T16:37:07.306-06:00] [reports] [ERROR] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002,0] [EngineName: rwEng-0] C Engine Job ID = 143 ERR REP-1804: Printer definition file BANCO cannot be opened.
    [2011-11-29T16:37:07.308-06:00] [reports] [INCIDENT_ERROR] [REP-1804] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002,0] [EngineName: rwEng-0] REP-1804 : Printer definition file BANCO cannot be opened.[[
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
         at oracle.reports.engine.EngineImpl.run(EngineImpl.java:553)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:104)
         at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
         at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
         at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
         at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
         at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
         at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
         at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
    please help!

    Hello,
    This error means that the file BANCO.prt is not found .
    The printer definition file (.prt file) was not found in the directories of REPORTS_PATH.
    By default , these files are located in $ORACLE_HOME/reports/printers and this directory is in REPORTS_PATH
    -> Check the value of REPORTS_PATH
    -> Check if BANCO.prt exists in a directory of REPORTS_PATH
    Regards

  • To install forms and reports 11g

    dear sirs, when i install forms&reports 11g it asks me about weblogic, and i go to oracle download and i download it, but i could not setup this weblogic server please anybody tell me how to setup weblogic server for my forms and reports 11g to work.
    help me pls
    Yasser

    First of all, this is a question for Weblogic Server, not Weblogic Portal forum.
    Nevertheless, you should be able to find your info at http://docs.oracle.com/cd/E17904_01/pfrd.htm or http://docs.oracle.com/cd/E24269_01/index.htm

Maybe you are looking for

  • AIR App. need to read textBox text into ....

    Hi there, After several days of searching and going through my collection of Flex database files I can't seem to find anything about writing from several different textBoxes into ONE only Text file OR even writing from an Xml file into plain text wit

  • My IPod wont turn on once it suddenly turned off!

    My IPod was charging and when i went to go use it. the screen was so dark i couldn't see, than it dissapeared. I assumed it has shut down. Now i can't even turn it back on. I tried charging it, connecting to CPU/Laptop, and i cant reset my IPod becau

  • How do I decompress a string in java?

    The string is compressed with zip and is encoded base64. I decocoded the string, I copied the string to a zip file and I tryed to decompress using the sample script(class UnZip2) from here: http://java.sun.com/developer/technicalArticles/Programming/

  • Printing multiple PR with different line items in smartform

    Hello all, I have an requirement to print multiple PR with different line items on different pages. So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items. Note: One loop proces

  • Yosemite Reinstall --- Failure --- Please Help!!

    Hello, please help me. Just don't know what to do now. Just had an Driver-Update-Crash due letting installing and auto-reboot two drivers (RME AudioDriver and Airdisplay2 Driver) and suddenly my MacBook Pro (Mid2012) didn't passed the grey startup sc