Installing Forms and Reports 6i on Windows Me

Has any one found a work around to install Forms and Reports 6i on Windows Me, I keep getting an error message. I already have Oracle 8i Personal Edition 8.1.5 installed and working on my machine.
Thanks,
Brent

Hi Jan,
I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
Hope this helps,
Frank

Similar Messages

  • How to install oracle Forms and Report 10g in windows XP OS

    How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
    It is working good.
    please help me this issue.
    please give the steps..............
    Thanks
    Rajeev

    Hello Frank,
    for development, you need to install Oracle Developer
    Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
    What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
    Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
    Best regards,

  • Install Forms and Reports 6i on 64 bits machine

    Hello,
    It is possible to install Forms and Reports 6i on 64 bits machine?
    How it is done?
    Thank you.
    Best Regards
    Rute

    Forms is a 32 bit application so you need to do what
    you normally do for the platform in question when you
    install and run in 32 bit emulation.Please, can you explain how to do it on the windows 2003 x64 machine?

  • How to install forms and reports 6i

    I am facing a problem while installing Forms 6i. The following are the details.
    I successfully installed Oracle 9i first under F:\oracle\ora90. While installing Forms 6i, I selected the "Typical" and gave the path as "F:\oracle\ora90" and clicked on the Next Button. Immediately I got an error message as "The location specified, 'F:\oracle\ora90' is already used as an Oracle home for 'Oracle 82 Beta'. It cannot be used as an Oracle home for 'nt'".
    Could any one give the information of how to install forms and reports 6i. It ll be of great help to me.

    use F:\oracle\ora90 as your oracle-db-home
    use F:\oracle\forms6 as your forms-home
    try it
    Gerd

  • Is it possible to install Forms and Reports 11.1.1.2.0 without Weblogic

    is it possible to install Forms and Reports 11.1.1.2.0 without Web logic ?

    No. Not according to all the Oracle documents I have read on the subject.
    Frequently Asked Questions for Oracle Forms 11g
    http://www.oracle.com/technetwork/developer-tools/forms/documentation/faq-2-130064.pdf
    B32474-01
    E10421-01
    E10130-01
    E12003-01
    Best Regards
    mseberg

  • Can't install Forms and Report whith Redhart 7.2

    I use oracle 8.7.1. When I try to install Forms and Report
    I get this message UT60 is not available
    Why

    Absoulte life saver! Just got my new 15" mac book pro and the first thing I wanted to do was download the trial of the new cs5.5 suite. Nope couldnt do that. Had the exact same problem with the adobe download assistant. Turned graphic switching off and worked striaght away! Crazy. Took my Mac into the apple store today aswel and they couldnt figure it out! So hope this helps anyone else who has this problem. Thanks hpwooten! I am not happy with my mac again :-)

  • Can't install Forms and Reports under linux 8.7.1

    I try to install Forms and Reports i get this message
    UT60 is not available or _TK60 is not available
    Please help me

    I solved my problem... more by a system of trial-n-error than anything else. Here's how you go about it:
    1. BACKUP ALL YOUR DATA. I would suggest using time machine thrice on three different locations. Better safe than sorry, and when it comes to backing up data, Overkill is Underrated.
    2. Boot into Disk Utility mode.
    3. Locate, select erase the primary HDD/SSD. WARNING: YOU WILL LOSE EVERYTHING ON YOUR COMPUTER THAT HAS NO BEEN BACKED UP.
    4. Install OS X online.
    5. Select your preferred backup location and tranfer all your data to the freshly installed system. This should restore your computer to an "as was" state.
    6. Once the computer is done restoring our data, restart the system.
    7. While restarting press the following key combination:
         cmd+option+P+R (You have press the combo before the grey screen appears during the boot and let go as soon as you hear the boot up chime.
       This will reset your computer's PRAM.
    8. Boot into your system and re-install xquartz (latest version) from the source site.
    I am not saying this process is fool proof. It worked for me, and it usually tends to work when you are facing problems due to a missing system file.

  • Install Forms and Reports builder 11g without WebLogic Server

    Hello Everybody,
    Presently to install Forms and Reports builder 11g on a PC for developers, we need to install WebLogic Server prior to that.
    For this, we need lot of resources. Hardware, to download big software bundles, memory resources, etc...
    If we have a solution like *"Forms and Reports builder 11g and its tools as stand-alone distribution from Fusion Middleware technologies"* ........ no words from me.
    Do you have a solution to install Forms and Reports Builder 11g without WebLogic Server?
    Regards
    murali krishna

    hi
    check out the following link.
    Forms/Reports 11g Builder without WebLogic
    sarah

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • How to install forms and reports 11g in developer machines

    Hi All,
    I have installed Database server 11.2.0.1.0 and installed application server forms(32bit) 11.1.1.4.0 separetely in two machine. Forms and Report builder working fine and connecting to the database.
    I have 5 Developers working in forms11g and reports11g .
    What i need to install in 5 developer systems.
    Please clarify at the earliest
    Thanks in Advance
    GV

    This came up awhile back, read the entire thing and make sure you use the same versions.
    Oracle 11g Developer suite installation
    Note that you will need to install Weblogic Server before you can install Forms 11g.
    Best Regards
    mseberg

  • Forms and Reports 6i with Windows XP

    I have a problem with Forms and Reports 6i and Windows XP Pro. Forms crashes when the layout editor is starting. Also when Reports is starting a blue screen comes up. With another user, the problem does not occur! When the profile ist reset for the unsuccessful user it functions correct for a while.
    It seems, that the user profile in certain situations will be corrupt with Forms and Reports 6i under XP.
    The installation CD I have used is Forms and Reports 6i Release 2 for MS Windows 95/98/NT.
    Can somebody help me to solve this problem?

    I have read on Metalink:
    MS Windows XP Professional certification: XP is currently not certified or supported on any release of Designer/SCM (Awaiting other related (IDS) products certification).
    Maybe the problem is caused by this.

  • To install forms and reports 11g

    dear sirs, when i install forms&reports 11g it asks me about weblogic, and i go to oracle download and i download it, but i could not setup this weblogic server please anybody tell me how to setup weblogic server for my forms and reports 11g to work.
    help me pls
    Yasser

    First of all, this is a question for Weblogic Server, not Weblogic Portal forum.
    Nevertheless, you should be able to find your info at http://docs.oracle.com/cd/E17904_01/pfrd.htm or http://docs.oracle.com/cd/E24269_01/index.htm

  • Install Forms and Report 11g, Weblogic, OID and SSO ?

    Hello,
    I want to migrate our system from Forms and Reports 6i to 11g with weblogic server 10.3.3 and I have two questions:
    1st: If we considered to obtain a system consists of (Weblogic 11g + Forms and Reports 11g + OID + SSO + Weblogic Portal + BI Publisher)
    What is the steps and the sequence of products installation and configuration, and what is the required versions of each one ?
    2nd: Can I abandon OID and SSO, is there a substitute ?
    If so, what's the steps and the sequence of products installation and configuration ?
    Thank you very much

    >
    You use the Oracle WebLogic Server installer to install Oracle WebLogic Server and to create a Middleware home (which is required before you can install Oracle Forms and Reports).
    For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or Oracle Software Delivery Cloud.
    Be sure to select the proper Oracle WebLogic Server installer for your platform.
    >
    weblogic you can download from http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html

  • Installing Forms and Reports 6i

    Can Forms and Reports 6i be used with Oracle 8i Ver 8.1.5 also can the default home directory be the same as 8i. I receive an error message stating that I can't and was wondering if the two programs are compatible.

    We installed Forms6i in 8.1.6 Oracle Home but it corrupted everything. Checking Metalink postings it looks that Forms6i only supports 8.0.6. You install it in a seperate Oracle Home. If you have 11i, the technology stack on the 8.0.6 side already has forms6i runtime and dvlp env installed. You can use those tools by running forms60.sh (You setup variables it needs) in oralce home and then run f60desm. Run X on your PC client.

  • Running Forms and Reports 6i on Windows Server 2003

    Hello,
    Has anyone managed to get Forms and Reports 6i (running on 9iAS web) to run succesfully on Windows Server 2003? If so would you mind sharing what you needed to do to get it to work. I don't care about any of the other components of 9iAS other than forms and reports. Also is it possible to run on the 64bit version of this OS?
    The problem I'm encountering (on the 64bit version of Windows) is that I can't get our webforms to launch any reports. The forms run just fine. I can run the report manually using rwrun60.exe and entering all the parameters by hand. BUT when I run the report from within the form a rwrun60.exe process starts and runs at full cpu. After a bit it dies but the form still continues to wait for it. The only way to get out is to close the browser and forcefully kill the form instance. If anyone has any ideas on what this could be any help is appreciated.
    Thanks

    Hi Jan,
    I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
    Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
    Hope this helps,
    Frank

Maybe you are looking for