Installing from imac boot cds
i have a powermac g3 B+W and a friend is going to lend me his imac dvds to install it. will this work alright or should i just go buy it for myself? powermac is g3 350mhz 768mb ram 40.0gb and 12.7gb hdd
Powerbook G3 Wallstreet + Powermac G3 B+W Mac OS X (10.2.x)
Hi Evan,
you cannot install from hardware specific install disks that shipped with another computer. Besides this it would also be illegal. You have to buy the retail full install DVD.
Similar Messages
-
OS X Snow Leopard install from (non-boot) USB memory stick
oi~
just bought this second hand and after i finally got into it (the seller forgot name/password) it turns out the DVD drive is malfunctioning, i was able to watch part of a movie but it will not boot from it nor let me install from DVD. (seller is not calling me back or responding to anything i sent) bottom-line for now i can live without the DVD drive but i would like to install OS X Snow Leopard.. can i copy the DVD contents onto a 8 GB USB memory stick (using a Vista pc) and install from the USB stick ? it does not have to be bootable as i realize to do that you must use the Mac.
i also have a old(er) iMac, maybe i can use that copy copy contents (if it even reads DVD's)
any help appreciated.. thanks.thanks..
i thought i put my model # in my info, it's a MB061LL/B (Apple MacBook "Core 2 Duo" 2.0 13") darn... i keep getting stuck when i think i have a solution. so copying the contents of the disc to a network pc will not work either. or, could i make the
USB stick bootable and copy contents using a old iMac ?
added: i might be able to borrow a MacBook w/ a working DVD player.. is it a fairly quick and painless process to create a bootable USB stick + put OS X Snow Leopard on it ? (i'm rusty when it comes to Mac..)
Message was edited by: roeiboot -
Flex 2 Windows 8.1 re-install from USB boot device ignored
Sorry to jum into your thread, but i've been trying to re-install Windows 8.1 on my Flex 2 but cannot succeed in booting from USB drive with the Windows 8.1 installation.
Same Thumb drive work on other laptop, but on this one, the Flex just ignore it and continue to load Windows 8.1 from it's internal HDD.
I tried to shutdown the Flex and turn it on using the NUVO button, i selected the USB as boot device and still got boot from internal HDD.
would appreciate any help from your side.
Moderator edit: Matched subject to contentRight, just checked the GNU documentation and you should use this format to boot Windows on sda1:
menuentry "Windows" {
insmod chain
insmod ntfs
set root=(hd0,1)
chainloader +1
https://www.gnu.org/software/grub/manua … ading.html
However:
If you have installed DOS (or Windows) on a non-first hard disk, you have to use the disk swapping technique, because that OS cannot boot from any disks but the first one. The workaround used in GRUB is the command drivemap
Another problem arises if you installed more than one set of DOS/Windows onto one disk, because they could be confused if there are more than one primary partitions for DOS/Windows. Certainly you should avoid doing this, but there is a solution if you do want to do so. Use the partition hiding/unhiding technique.
https://www.gnu.org/software/grub/manua … 02fWindows -
OSX Server wont install from clean boot
Hello
I cannot get my Mac Mini to install osx server 10.5.4 straight of the DVD.
Only way i got it working was by installing normal leopard and then running the upgrade from within.
Please can i be told to how to install straight of the disk?
(When i try normally, it just reboots into osx/or gets stuck in a reboot loop?In this case, you will have to have [whatever version of Mac OS X client is appropriate for this particular box|http://support.apple.com/kb/HT1159] installed or reinstalled, then start the installation of Mac OS X Server per [HT3479|http://support.apple.com/kb/HT3479]
If you've an unbootable installation on your disk as is likely the case here, use Disk Utility in the installer to erase the disk, and then roll in the backup you made prior to starting the installation of Mac OS X Server or roll in the Mac OS X client software from the DVD that came with the box, and then follow the steps defined in [HT3479|http://support.apple.com/kb/HT3479].
As for the proposed sequence, you likely won't need to update the 10.5 Mac OS X software here (once that software is reinstalled or reloaded or installed onto the box), and can probably go straight to the Mac OS X Server installation, and can then update Mac OS X Server to current. -
My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have both a bootable backup exernal hard drive and the original system disks. I have read on these support pages that you cannot get snow leopard freshly installed without erasing the whole whole drive since the original installation disks are older than the current updated version. I have also read here that it is possible to get the system newly installed (though it's wise to have a back up of the rest of your files). I need to know which can work. Is there an un-install function after booting from a different source? If I can get the system filess off the main hard drive and then install Snow Leopard from my original disks, then go through the upgrades, and end up with the rest of my files intact, that would be wonderful. I have all the adobe design premium software on the system with their updates and would like to not spend hours and hours restoring it all. And since I don't know where all the little bits and pieces of the Adobe programs get installed, perhaps it won't work anyway?
thanks,
KahtyI have read on these support pages that you cannot get snow leopard freshly installed without erasing the whole whole drive since the original installation disks are older than the current updated version.
That is incorrect. You can install an older version of the same OS over itself. With Snow Leopard and later, unless you intentionally select to erase the drive, the OS removes and replaces all remnants of the current OS and leaves all of your third party apps, personal files and settings intact.
I have also read here that it is possible to get the system newly installed (though it's wise to have a back up of the rest of your files).
That is the correct information.
Is there an un-install function after booting from a different source? If I can get the system files off the main hard drive and then install Snow Leopard from my original disks, then go through the upgrades, and end up with the rest of my files intact, that would be wonderful.
No, there is no way to remove just the OS files from a drive. At least, not in any manner you could call easy. There are thousands of hidden files and folders related to UNIX. Many apps won't even run correctly, or at all, if they're not on the same drive you are starting up to. So trying to separate your third party apps from the drive the OS is on is not a good idea.
I have all the adobe design premium software on the system with their updates and would like to not spend hours and hours restoring it all.
If your end goal is to simply get the contents of the external drive onto a new internal drive in a bootable form, you can use Disk Utility to clone the drive, or use one of two excellent third party apps; SuperDuper! or Carbon Copy Cloner. -
Windows 7 64 Bit Boot Camp install on iMac 27" (2010) without int. DVD drive
I have a current 27" iMac (bought last year) and the internal DVD drive doesn't work. It's new, has NEVER been used. I guess it's dust inside, but cleaning CDs didn't help. I don't want to bring or send my iMac to the Apple repair service because normally I don't need this internal DVD drive.
Hence I'm looking for alternative ways to install Windows 7/64 via Boot Camp. I have rEFIt-0.14 installed, an Original Windows 7 Retail-DVD (and a ISO image of it), an external USB DVD drive (Samsung), an external USB hard drive 160GB (LaCie), some USB flash drives (Kingston, 4GB) and a Windows PC.
I've read many threads about this problem, for example this:
https://discussions.apple.com/message/15002932 resp.
https://discussions.apple.com/message/15016734 (saying it SHOULD work!)
Hmmm... Some people succeeded in installling - other didn't. I've also read about that "Parallels way" - but I would prefer not to use Parallels.
Is any information missing...? What would you recommend? Thanks a lot!It doesn't work! But others reported that it should!
I've tried it using the Original Windows 7 DVD and also
a bootable 4GB Kingston USB flash drive made
under Windows 7 as follows:
The rEFIt-0.14 boot menu lists the following options...
* Boot Mac OS from Macintosh HD
* Boot EFI\BOOTX64.EFI from EFISECTOR
* Boot Windows from CD
* Boot Legacy OS from EFISECTOR
... but nothing helps - I always get the message
"No bootable device -- insert boot disc and press any key"
and can only switch off my Mac.
What am I doing wrong?
Or will only that Parallels option work? (Last year when
I tried Parallels for the first time, the uninstall function
didn't work comprehensively and I had trouble removing
the Parallels installation completely from my system.)
Thanks for any help!! -
Downloaded and installed os x yosemite on iMac that was purchased originally with Mavericks. When power button is pressed I get start up audio tone and then the the black screen with the white apple symbol with the progression bar. The bar moves very slowly two about one third and then the mouse cursor appears and there it stalls for around two minutes. After the wait the login screen appears and it operates normally. This whole process before update would only take maybe 30 seconds.
If I try the web recovery process it will revert back to Mavericks any suggestions on what this might be. I do have an external Mac passport pro external drive that does have time machine enabled and has been there for months.
ThanksAfter spending a number of hours with Apple Care personnel I was connected with a supervisor and finally got the iMac to boot up on every attempt and in a reasonable amount of time. Login screen now comes on in 30 to 40 seconds and computer is usable within a total time of 1 minute to 1minute 30 seconds.
Here was the process. Tried to download whole operating system with reinstall from utilities menu at power on and at 7 hours progress bar stalled at one third the way. Reason, time machine external hard drive was still connected during process. Disconnected all external connections except power and tried download again. This time whole operating system downloaded in 15 to 20 minutes. Yosemite installed and rebooted automatically and booted to login screen, signed in then to desktop, but boot took around five minutes. Shutdown and connected all peripherals, i.e.. ext. HD, DVD, printers and tried to start. iMac stalled at 2 minutes into progression bar with white apple symbol before login screen. Removed peripherals and tried again and still stalled and would not boot.
What was done to correct is as follows. Started iMac in Safe Mode, cleared all items in cache from Macintosh HD/Library folder and System /Library folder, system start up items, launch agents, and launch daemons contents cleared, removed printers in system preferences, ran disk utilities verify and repair of disk and disk permissions. Shutdown and removed power from iMac. With no peripherals system then booted normally. Reconnected peripherals while iMac was still on and added printers back to system preferences and all is well.
So it seems only reasonable that the downloading problem was hindered by the time machine external hard drive, to which an Apple rep. agreed and the extremely slow boot up or stalled boot up was caused by items in the start up and launch folders. I will state here that I was using my ISP's anti virus software for the Mac which was in the launch folders and most likely was causing the boot up problems. -
Cannot boot or install from 9.2, ,10.2 etc.
To make a long story short, on a G4 mirror door, attempted to empty trash with terminal command and wiped out hard drive. Was running 10.2. Now computer will not boot or let me install from 9.2 or 10.1,2 etc. disks. I then erasedthe disc with 10.3 that came with my G5 and can install that, but I want to go back to 10.2 so I can use my old epson stylus color printer. The outdated driver will not work on 10.3. I have tried everything. Any suggestions?
Hi Patrick:
Does your model of G4 support booting from OS 9? The later models (gigabit ethernet, FireWire 800) do not. Either way, it seems like drastic measures are called for. Here's what I'd suggest.
1. Use whichever install disk the G4 will boot from; if that's the 10.3 installer that came with your G5, so be it. Use Disk Utility to erase the drive, and use the "Write zeroes" option. It shouldn't matter which version of Mac OS is used to get the hard drive to this state.
2. Quit Disk Utility and quit the Installer. When you hear the chime as the computer reboots, use the AppleOption+of key combination to boot into (o)pen (f)irmware. Once there (white screen with black type), use the following commands:
eject cd <enter> to open the tray, then switch install CDs to the 10.2 version
eject cd <enter> to close the tray
reset-nvram <enter>
reset-all <enter>
3. The computer will restart after it processes the reset-all command. When you hear the chime as the computer reboots, use the AppleOption+pr key combination to reset the PRAM. Hold the keys down until you hear the chime three times. (Yes, the reset-nvram is like resetting the PRAM on steroids, but it won't hurt to cover all the bases).
4. Before the computer boots from the Install CD, turn it off by pushing and holding the power button until it shuts down. Open your tower, and reset the PMU. It should be located toward the front of the motherboard (your manual should show you where); press once and hold it for a few seconds. Leave your computer alone for at least 10 minutes (go have lunch).
5. When you come back, plug in just the keyboard, mouse and the monitor. Boot from the 10.2 install disk and try again.
If all this fails, there may be an underlying hardware issue that preventing a re-install.
Hope this helps.
Andrew Penner -
Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!
If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
see > Startup Manager: How to select a startup volume
If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
For more on gray screen, see > Mac OS X: Gray screen appears during startup -
How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?
lunagirl wrote:
The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61. Add/Remove programs has only these pre-installed apps:
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Is the activation assistant one of them?
No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
Rgds,
Ahti -
Arch install from hard disk(without boot-cd)
I was refering to this page to install Arch from the 0.7 base.iso without writing the ISO file to a cd. I use grub-0.94 and placed the following lines in 'menu.1st':
title archcd
root (hd0,7)
kernel /isolinux/vmlinuz root=/dev/hda7 BOOTMEDIA=cd
initrd /isolinux/initrd.img
I formatted /dev/hda7 as a 250 MB partition with ext2, which grub correctly identified(I had some problems with this, but Pechorin helped me out), and then used the 'dd' command to copy the iso to this partition.
But on booting, grub identifies the partition correctly but does not seem to be able to find any files on the partition(I went into the command line since selecting from the menu did not work, but it still gives the same error)
Error 15: File/Directory not foundI've never tried this before, and I only briefly read that Arch wiki you mention. However, why can't you just use the "loop" device to mount the .iso file and run it from there?
mount -t iso9660 -o ro,loop /path/wombat(?).iso /mnt/cdrom
Then, install from `/mnt/cdrom` as if it were a CD. I don't understand the necessity for all that other stuff. I mount .iso files all the time using the loop device. It's only when I need to modify the .iso itself will I copy the .iso contents to a temp directory (or partition). I don't see why you would need to modify the .iso contents, since it's just emulating a CD anyway. -
How can I initiate dual boot install from a CMD window...?
Laptop hardware meets sys req for Win 10 and currently runs 8.1
Samsung RV-511-S01UK
i3 380M @ 2.53Ghz
6GB RAM
Discrete Nvidia 315M 1GB dedicated VRAM
Having first tried 10 inside a VM... and it looks ok.... time to try it on real hardware instead of the restricted emulation.
I'm attempting to clean install and create a DUAL_BOOT on prepared partition
ISO downloaded direct from the correct link (SHA-1 checked)
USB... or DVD... installer created with the MS installer tool.
ALL attempts to install by booting from either installer medium, trying builds 9926, 10041 and 10049 (64 and 32 bit), end before they start....... the process stops completely at the very first screen.... the logo screen.... the indicator dots beneath
the logo screen which appear as standard to 'indicate' that a 'process' is happening in the background NEVER appear... even after an 8 hour wait in one instance.
Even if I follow the install instructions supplied on the download page here instead of booting direct:
5. Double-tap or double-click setup.exe from the installation media, and then follow the steps.
it gets to a point within the process and has to restart.... then it stops as soon as the logo screen appears just as it does when I try and boot from the created installers.
There seems to be a problem at the Windows logo screen which halts the entire installation process !!! It suggests a BIOS/Win 10 conflict, but only one way to really find out..... process log...?
The only way to discover where the error lies is to observe the process happening as it happens in real time (if that's possible) or create log file of my attempt.... from within a CMD window...? Unfortunately I don't know the language of CMD code
well enough.
I would like someone to assist with the correct code on how to initiate the install from within a CMD window so that I can see the process happen in real time within the window and therefore observe exactly where the instruction is failing.... but
as stated if running a CMD during install is not possible then a saved log file to refer to after fail and reboot into 8.1
This should make it easier to define the problem and as such discover the solution
If someone can supply the code it would be very helpful..... if no-one here knows I'll pop over to the Linux forum and ask one of the people there after setting up Ubuntu with a spare partition for the Win 10 TP
cheersHi base1268,
Can you find the following log files when you reboot into Windows 8.1?
C:\$WINDOWS.~BT\Sources\Panther\setupact.log
C:\$WINDOWS.~BT\Sources\Panther\setuperr.log
C:\$Windows.~BT\Sources\Rollback\setupact.log
Actually, for current situation, I suggest you use native boot to try Windows 10 Technical Preview：
http://blogs.technet.com/b/haroldwong/archive/2012/08/18/how-to-create-windows-8-vhd-for-boot-to-vhd-using-simple-easy-to-follow-steps.aspx
it still works for Windows 10 Technical Preview.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to move the photos from my boot drive to a newly installed hard drive?
- regarding iPhoto's storage, etc.... Where is the iPhoto library located anyway? And - how to transfer it to the brand new hard drive?
I want to add a ned hard drive just to keep the media there, so I would like to transfer all the GBs worth of photos (the whole iPhoto library or - what folder, really?).
What do I need to do in order to accomplish this task?, and assuming that there is no problem moving all the photos (as I understand it would mean Originals, Modified & Data) - can I then just delete the original iPhoto Library (but from where?) somewhere on my boot drive?
Basically - I want to move all the photos from my boot drive to the newly installed hard drive, and after a successful move, I'd like to delete all the same photos from its original location (the boot drive).One addition to Larry's steps: make sure the external drive is formatted OS X Extended (journaled) and have it set to ignore ownership as seen here:
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks
turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.
Maybe you are looking for
-
How to retrieve data from a table that match values in a varray?
Using - Oracle 10g Release 1.2 How to do write a sql to retrieve data matching values in a varray? I have the following: declare v_ct NATURAL := 0; type t_cur is REF CURSOR; v_cursor t_cur; TYPE t_array IS VARRAY(100) OF NUM
-
ZMRBR - invoices released but not in FBL1N
Hello everybody, I have a problem with a few invoices which were released in ZMRBR (through management approval) but the invoices were not automatically released in FBL1N. But because the invoices had to be paid quickly, I had to manually release the
-
Can you change the icloud email address linked to you icloud account?
Some how the my husbands iCloud email address got linked to my iCloud account is there a way to change the iCloud email address to another?
-
When the mac starts up , the menu from bleutooth is on the screen
when the mac starts up , the menu from bleutooth is on the screen. How can i get it away?
-
Server certificate verification failed: issuer is not trusted
Tried to sign in to a couple of websites lately and got this message: Server certificate verification failed: issuer is not trusted What is going on and how do you fix?