Installing Gateway service on the BO Server

Hi,
We have an existing setup of BO XI 3.1 with the Integration Kit.
Now, we are moving the production content to a new server. For the integration kit to communicate with the SAP system, I need to install the SAP Gateway service on the BO server.
Can anyone point out where and how can i find the installables for the SAP Gateway?
Can I use the files from the old server and re-register on the new server?
Thanks for all your help.
-Purav.

Thanks Ingo....
We have a SAP implementation as well, so can I download it from the service marketplace? If possible can you guide me to the exact name or location of the download? I am completely on the BO side, so not much familiar with the SAP stuff.
Thanks,
-Purav.

Similar Messages

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Install and configuration on the SharePoint server 2007 issue

Hi All,
           I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
          I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM      cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
      Echo Deactivating LiveCycle Connector feature with WSS
      %STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Deactivating LiveCycle Workflow feature with WSS
      %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
      Echo Uninstalling LiveCycle Connector with WSS
      %STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
      Echo Uninstalling LiveCycle Workflow with WSS
      %STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
      Echo Copying source files to WSS \TEMPLATE directory
      xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
      Echo Copying Feature Resource files to WSS 12\Resources directory
      xcopy Resources %RESOURCESDIR% /e /y /i
      Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
      xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
      Echo Installing LiveCycle Connector with WSS
      %STSADM% -o installfeature -filename LiveCycle\feature.xml -force
      Echo Installing LiveCycle Workflow with WSS
      %STSADM% -o installfeature -name LiveCycle/Workflow -force
      Echo Activating LiveCycle Connector with WSS
      %STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Activating LiveCycle Workflow with WSS
      %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
      Echo Restarting IIS worker process
      IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol Sahare

This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

Mdt 2012 + WDS service on the same server. DHCP question

Hi,
I am using MDT 2012 on Server 2008.
Boot images are placed on 6 years old WDS server running on 2003.
I need to remove WDS server (2003).
Cannot find exact instructions for enabling PXE for MDT2012.
I don't need introduction guides. But clear few lines of instructions.
From quickly checking web I understand that I need:
1. install WDS services on the same MDT2012 server 2008.
2. import Lite Touch boot images from Deployment Share
The only point I am missing is DHCP question. In Microsoft prerequisites for WDS services, DHCP should be present on the same server were WDS is...
I watched one video on web and the guy just installs WDS on the MDT server and not mentioning DHCP at all.
Sure that there is DHCP server serving multiple subnets on the network.
My confusion about DHCP on WDS prerequisite comes from not having DHCP services installed on old WDS 2003 machine.
So why it is required on WDS service in server 2008/2012?
Can somebody confirm that DCHP must exist on the same server were MDT and WDS services are enabled.
And is it a valid option to have all 3 on one Server machine if DHCP is really needed for enabling PXE in MDT environment?
I saw the info about ports 67 (should be disabled) and 60 for PXE enabled.
Will appreciate DHCP part explanation and how to...
Thanks.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

RL69,
in my environment DHCP serves multiple subnets. For now no need to serve client machines on different subnets. The Deployments will be done on subnet were MDT resides. If necessary PXE relay could be enabled on Core switch (or where necessary).
So if I understand correctly for a scenario above all what I need to do for PXE enabled MDT is:
to add WDS role/service on the same MDT server and import boot images.
Right?
Will do it right after your confirmation :)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

How do I install Mavericks without invoking the OSX Server Plugin?

How do I perfrom a clean install of Mavericks from the Recovery Partition without it automatically installing, and then invoking or executing the OSX Server Plugin that ultimately results in rendering open directory operable as well as the server. I have ignored this continously, but the other day I went into the terminal and typed ARP -s that lists the shortname for the host of my MacBook Pro and it gave a totally different name than what I had given it in the wi-fi network interface under the WINS tab. More importantly, I do not want to install open directory nor the osx server plugin as it opens up more complexity than I want to deal with. Any suggestions is greatly appreciated. BTW, below are the steps I performed for installing Mavericks.
1. Powered on the MacBook Pro and then hit the Option key.
2. This took me into the Recovery Partition, whereby I went into the Disk Util and erased or formatted the hard-drive.
3. I then clicked out of the Disk Utility and went into the Recovery Mode by clicking on reinstall the current OS.
4. I went through all the prompts and the system downloaded a current version of Mavericks.
5. After completion, I turned on my Macbook Pro and went through the prompts to install Mavericks.
6. This is all I did, and I didn't download the OSX plugin nor invoke it in the new version of the Operating System.
I just assumed that it was a standalone version until I found the server for osx running with open directory invoked, the server invoked, along
with other components relative to a new standalone version.
Again, my question is simple: How can I reinstall Mavericks without it downloading and automatically
iinvoking the components as described above?

Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

Create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse

Hi,
I followed the amazing SAPUI5 blog :
How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
I was able to resolve all errors mentioned in this blog but then i get another error :
Uncaught TypeError: Cannot read property 'dataServices' of undefined
Any idea what is the problem.
Thanks a lot!
Amina

Hi,
I followed the amazing SAPUI5 blog :
How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
I was able to resolve all errors mentioned in this blog but then i get another error :
Uncaught TypeError: Cannot read property 'dataServices' of undefined
Any idea what is the problem.
Thanks a lot!
Amina

Unable to start services of the secondary server of the clusteredenvironmet

Hi
We had clustered two servers (OBI) and we are able to start the services of the primary server but unable to start the services of the secondary server. Please help with a solution for this issue.

Hey..
Can you provide some details like
1) Your cluster setup , how many managed nodes you use?
2) Where does the AdminServer and nodes exists , i mean about machines - same or different ?
3) What's the error you're seeing while starting ?
Make you're setup clear , so we can fix your issue..
-kiran

Can we install more than one gateway service on the Gateway-pc?

Hellos.
There are several versions (instances?!) of IDM running happily on our IDMserver e.g. 7.1.04, 8.1.0.12, 8.1.1.0
What I would like to do is to arrange 3 gateway services one for each IDM version and each version of the gateway bound to a different port.
When I try to install the second "service" it bombed out with...
C:\idmgateway71>gateway.exe -i -p 9271
02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
,150): trace active, level: 4, file: c:\idm\GWtrace.txt, maxSize: 99999 KB
02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
,108): In WSTrace::init()
02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
,109): Gateway version: 'Sun Java System Identity Manager 7.1'
02/08/2011 15.01.09.402000 [1676] (../../../../src/wps/agent/logging/WSTrace.cpp
,110): OS version: 'Windows Server 2003 Family Service Pack 2 (Build 3790)'
Usage: gateway -in -r -s -k -tn -d -pn -fname -ln -mn -v
-i: Install this program as an NT service, with specified startup
-r: Remove this program from the Service Manager
-s: Start the service
-k: Kill the service
-t: Set startup for an existing service
-d: Debug; run as a regular application
-p: Specify a TCP/IP port number (9278 default)
-f: Specify the path to the trace file
-l: Specify the level of tracing (0 default - no information)
-m: Specify the max trace file size in kilobytes
-v: Display the version
^C
C:\idmgateway71>
C:\idmgateway71>
What gives?!

I see the methodology...
I can indeed bind several gateways to different ports.
BUT.
I will need as many encryption keys as I have gateway daemons and It seems this Gateway was designed as a single shot.
I get errors like: Cannot find encryption key from Registry: using default.. and when I try testing the connection I get bad userid/password.
Thanks for the help I can continue digging at this..
GF

Power BI analysis services connector - the remote server returned an error (403)

Hi all, does any one have any suggestions what to try to identify the configuration problem I have?
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions.
When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)."
I've tested connecting to the database from Excel on a desktop and connect fine.
I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.
The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the
connector configuration. It's also a local admin account. There is no gateway installed on the server.
Any help would be greatly appreciated, thanks, Brian
Brian Searle

Brian-
One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
whoami /upn
Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
If that doesn't work, your best bet is to go to
http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
http://artisconsulting.com/Blogs/GregGalloway

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

BizTalk to Web Service - Error - The remote server returned an error: (403) Forbidden.

Hi Everyone,
I am connecting to an external web service from my biztalk application through a dynamic send port.
When my biztalk application is trying to send the request message to the web service through the send port, I am getting the following error :
The remote server returned an error: (403) Forbidden.
The external web service team have provided a certificate and a private key to install in my server.
I have installed the certificate by double click the .pfx file using the private key and have added the certificate in the host ProcessHostx64.
Still i am getting the same error.
Can someone help on this issue ?
Many Thanks,
Anand
S B A

The Private Key should be installed under the user running the BizTalk Server Host. Please confirm that you have done this?
If so, try to make this work in a small .NET test Application before porting it to BizTalk, so that you can confirm that you do have sufficient credentials to call the Service.
Morten la Cour

Installing different service packs into one server

Hi,
I was just wondering is there any way in which i can incorporate different service packs into one server?Any clue with regards to this is appreciated.
Thanks

Hi
The basic concept of applying SPs in Java is to add the new functionality and remove the gaps which were in previous releases. And always when we are using the Java instance the current SP is recognised. Before the deployment of a software component, the SDM server performs additional version checks. Only new software components that have a higher counter than the counter of the old software components can be deployed.
When we apply the SP in Java, following things are checked:
The vendors and the names of the SCAs are the same as the ones of the software components that are installed on the system.
The releases of the SCAs are the same as the ones of the software components that are installed on the system. JSPM allows updates only within one release.
The support package levels of the SCAs are higher than or equal to the ones of the software components that are installed on the system.
If the support package levels of the SCAs are equal to the ones of the software components that are installed on the system, the patch levels of the SCAs are higher.
Checks for modified software components
If the provider of an SCA is different from the original provider, SAP AG, of the software component that is installed on the system, this SCA has been modified using the NWDI.
Checks on foreign software components
The JSPM checks if, after the deployment of a software component, the dependencies on other software components are fulfilled.
Please check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/c45b4211aac353e10000000a1550b0/frameset.htm

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installing Gateway service on the BO Server

Similar Messages

Maybe you are looking for