Installing GRC products on an NW evaluation version
Dears,
I would like to know the requisities and how to do to install the following on a computer :
1. NW evaluation version,
2. ECC with standard content based on NW evaluation version,
3. AC 5.3 , PC 2.5 and RM 2.0 based on ECC point 2.
The idea is to build a big sandbox for GRC proficient training purpose.
Regards,
Axel.
Dear Axel,
As GRC Products (especially Access Control - AC) are add-on components of NW, I am not sure whether NW evaluation version comes up with pre-delivered functionality of GRC products.
Following is a Best Practices link to AC 5.2 whichwill help you in your configuration.
http://help.sap.com/bp_grcv152/GRC_US/HTML/index.htm
Best Regards,
Sirish Gullapalli.
Similar Messages
-
Customer was asked for a product key to convert evaluation version of SQL Server Std 2014 to their SQL Server Standard 2014
Volume License.
He cannot download the ISO as he is on a sterile server on his client’s site.You may also try and look for PID in to DefaultSetup.ini file in the installation media, which can be found by going to the root folder of the SQL Server set media
on the server or on the DVD, then look for this file in either the x64 or x86 folder.
Keerthi Deep | Blog SQLServerF1 |
Facebook -
I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?
I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
> -
How do I install full product key onto a trial version.
LiveCycle ES3. Trial installed. Bought full. Received product by mail (no download available [why?].) Can't see where to load license. (Surely I don't have to reinstall the software???) Please help.
license type need to be updated
follow the steps mentioned @ http://goo.gl/77lLa
hope that helps... -
Downloaded Evaluation Version of Windows Server 2012 Standard- install is asking for product key
I downloaded the evaluation version of Windows server 2012 standard from the Microsoft TechNet site.
When I try to install server 2012 as a new virtual, I'm prompted for the product key for server 2012.
I do not have the key. How do I get the key? Or, why is this happening on a evaluation version?
Does anyone out there have the key for Windows server 2012 standard evaluation version, or know where I can get it?
Thank you.
rhinoguy1Hi rhinoguy1,
Please down load ISO from following website :
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I downloaded
Windows Server 2012 Evaluation Version recently. Actually, I wanted to check whether i could run Windows Phone 8 emulator on Win server 2012 using my core2duo (Non-SLAT PC). Now i wanted to activate the evaluated version by using product key of my
MSDN's student account. But its giving error when i enter my product key. I checked this article about converting evaluation version to full retail version. The article
says :
"If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional
domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation version."
So kindly guide as to how I can install this additional domain controller and how to remove AD DS from domain controller. Currently, I have Dual Boot PC( win 8.1 and win server 2012).
Hoping to get a brief response....
Unless you have configured a whole lot of things into the DC running on the evaluation copy (should never install production on an evaluation copy), it would be simplest to start from scratch and reinstall.
Or, you simply go into Server Manager > Manage > Add Roles and Features to remove the AD role. Then you will be back to a workgroup server.
The evaluation version is good for 180 days plus three re-arms of 30 days each. So you can do a lot of experimenting with the evaluation copy without the need for using an MSDN key.
.:|:.:|:. tim -
OracelBPA.exe - Install Evaluation Version - BPA Suite
I've downloaded the evaluation version of the BPA Suite and intended to install it with the embedded olite to see what it can do. The installation instructions say to install using OracleBPA.exe which is not part of the download.
1) Where do get that from? or
2) How can I install the Evaluation version (I have the installation document, just think I need to get the process started?)
I'm on Windows Server if that matters... and successfully downloaded and installed the BPM Eval. trying to figure out how these work together or not...
Edited by: user8748439 on Aug 24, 2009 6:40 AM
Fixed typosToday I downloaded the .zip again, and there were different files, inlcuding the setup.exe that was missing.
Installed, and running. -
I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?
Can you use the number 3 key elsewhere?
[topic moved to Downloading, Installing, Setting Up forum] -
I have installed an evaluation version of lightroom 5.6;64 bits on my windows 7 64 bits pc sp1. Tecnical capacities of my pc are ok. When I Try to run lightroom i read the following message :"lightroom exe. application failure 0x000007b" Thanks for your help. Pasc39
I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.
-
Student Evaluation version update to Student Install
Hello,
I was wondering if in order to upgrade from the Student Evaluation Version towards the Student Install Version is it necessary to reinstall the whole program or would it be enough with introducing the License Key and installing the necessary modules?
Thankyou for your help,
FlorasgaYou will not need to re-install the software. If you have the full Student Edition, you can just activate your evaluation software with your serial number.
http://zone.ni.com/reference/en-XX/help/371361L-01/lvhowto/licensingbd/
Hope this helps!
Aimee -
How to activate evaluation version of SQL server
How to activate evaluation version of SQL server 2012 with open license.
in the VLS portal it is saying no product key is require. but my problem is i already installed evaluation version of SQL server 2012 and configure many things to it. after that i got open license from Microsoft,Hi,
If you want to upgrade ( i Guess this is what you want) evaluation edition to enterprise or standard you need to run Ent/ standard edition from setup.exe installation window will pop up on that select maintenance on left side and then select edition
upgrade.
Take help of below link
http://blogs.technet.com/b/sqlman/archive/2010/03/16/sql-server-2008-upgrading-to-standard-enterprise-edition-from-evaluation-edition.aspx
revert if any issue.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
BusinessObjects Integration Kit for SAP u2013 key for 90 day evaluation version
Hello,
I have installed Crystal Reports 2008, a 30-Day evaluation version on my laptop, from here:
http://www.businessobjects.com/campaigns/forms/downloads/crystal/2008/datasave.asp
and I would like to connect my reports to the SAP Data Source (SAP ECC 6.0). For this I have downloaded the BusinessObjects Integration Kit for SAP - 90 day Evaluation version and I try to install it on my laptop. Unfortunately during the installation of the Integration Kit I receive a message u201CThe product key code is not valid or has expiredu201D. The Product key code and the Integration Kit itself I have taken from this page:
http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
Could you please help me with the installation of this integration kit? What is wrong?Hi,
do you have access to Service Marktplace [http://service.sap.com/support]? You can get the temporary keys for BOBJ under Keys & requests .
Regards,
Stratos -
OEM connectivity using evaluation version
Hi,
I downloaded OEM(Oracle Enterprise Manager) from oracle site and installed in windows machine and trying to connect to our Production server which has 40 CPU's.It is saying I need to have "select any dicitonary" access to use OEM.
I am not DBA.i dont have sys access but I impressed alot with OEM features mainly performance monitoring and resource usage monitoring.Can I connect to OEM as readonly ?
If yes.Is this evaluation(downloaded from oracle.com) will work for my production 40 CPU server ?
If yes I will try my best to get "select any dictionary" privelege.I am using 10g OEM and my Production instance is 9.2.4.0
Thanks in advance for your help
Thanks
Message was edited by:
user509266I have OEM agent installed in my Production box.DBA are able to connect to that.
Can I conect to that agent through evaluation version OEM which downloaded from oracle website.Do I need to have license to connect 40 CPU system or evaluation version can also works for this
Thanks
Message was edited by:
user509266 -
Can i upgrade to windows 8.1 enterprise from 90 day evaluation version
can i upgrade to windows 8.1 enterprise from 90 day evaluation version? as our company has volume license key for win 8.1 enterprise purchased
yes you can.
Skip Product Key Input in Windows 8.1 Setup
To achieve our objective, we need to edit the ei.cfg (edition configuration) file present inside the
/sources folder of the ISO image. All we need to do is to provide the version details inside this file so that Windows Setup is not needed to ask for a product key to install the appropriate version relevant to that product key.
If you are going to install Windows 8.1 using a USB drive, transfer the installation files to the USB and then proceed to step 2. On the other hand if you need to create a DVD, open the ISO using a utility such as MagicISO so that the structure is not affected.
Browse to the /sources folder.
Look for the ei.cfg file and open it in a text editor such as Notepad or Notepad++ (preferred). If the file doesn’t already exist, create a new text document and rename it as ei.cfg
Now amend the file depending on the version which is included in your particular copy and the version which you want to install. For Professional edition which will be the best bet for most of the users, paste the following context into the
ei.cfg file. Make sure that anything that already exists in the file should be cleared first.
[EditionID]
Professional
[Channel]
Retail
[VL]
0
Save the file and run the Windows 8.1 setup again. The setup will not ask for the Product Key anymore.
This is not a hack or anything illegal. The configuration above is supported by Windows installer and is well documented by Microsoft and can also be used on some other versions of Windows as well. -
Evaluation Version to Full Version
I have installed Windows Storage Server 2012 Evaluation Copy and when I am trying to upgrade it to the full version by using the
OEM non SLP key, I am getting the below attached error.
Kindly help me in rectifying the same and it would be helpful if you can share the steps which I need to follow to upgrade it to the higher version.Hi Ashish Mangtani,
If the server is running an evaluation version of Windows Server 2012 Standard or Windows Server 2012 Datacenter, you can convert it to a retail version, you can also convert
Windows Server 2012 Standard to the retail version of Windows Server 2012 Datacenter.
The related KB:
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
More information:
Article- Converting evaluation versions of Windows Server 2012 to full licensed versions with valid product keys
http://blogs.technet.com/b/blainbar/archive/2013/03/06/article-converting-evaluation-versions-of-windows-server-2012-to-full-versions.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
ASSIGN_TYPE_CONFLICT in SAPLCOM_PRODUCT_UI_API
Hi Experts, I am calling FM "COM_PRODUCT_UI_MAINTAIN" when executing from Z program. Passing the value for IS_PRODUCT and IS_SET. But the program is terminated with dump "ASSIGN_TYPE_CONFLICT" for ABAP Program SAPLCOM_PRODUCT_UI_API, Inclu
-
HT204266 Can I get my money back for an app my toddler purchased?
My 2 year old daughter purchased a £13.99 app that we do not need. She did this just by tapping purchase as I had already signed in to purchase her a couple of free apps to play with. Can I get my money back?
-
"The movie could not be sent to QT, because a file couldn't be found"
When I try to export a 2 1/2 min. iMovie video I made today in pretty much any format, I get the following: "The movie could not be sent to QuickTime, because a file couldn't be found. Please make sure that your project disk has write permission, and
-
How to redact information in adobe acrobat XI standard
How do you redact information in adobe acrobat XI standard
-
Creating two-level dvd menu with Elements 9
Hi, I am trying to burn a DVD (and later on Blu-Ray) using PRE 9. I can burn using a provided menu-template. However, I would like to create a two (or multi) level menu for the disk. I would like to make the menu look like this: Play all Year 1 Scene