Installing Grid Control 11gR1 - certified component combinations

I'm reading through the various requirements and certifications and am a bit confused. I am working to install EM Grid Control 11.1.0.1.0 (can't use 12c as I need to monitor a PeopleTools version not yet certified with 12c). I also should say that I am looking to run all of this on Windows-based machines.
As I read through the various certifications for Grid Control 11, I find that EM itself needs to be on a Windows 32 bit machine but it seems that its corresponding infrastructure apps (Weblogic and Oracle DB Repository) require x64.
So it would seem I could run the backend pieces (web and db) on a Windows 2008 x64 box and just put Grid Control on a Windows 2008 32 bit box? Is that correct?
My goal is to monitor FMS v9.0 on PeopleTools 8.52 and HCM v9.1 on PeopleTools 8.50. Backend databases for both apps are MSSQL and all layers are running on Windows 2008 x64 boxes.
TIA,
Jeri

Similar Messages

Oracle Grid control 11gR1 : emctl start oms gives OMS version 11.1.0.1.0 is

Hi, I have installed grid control 11gR1 on OEL 5.6 64 bit env. The repository db is oracle 11.1.0.7.0 with WLS 10.3.2
My install of the Grid contol was a fresh install on a db and weblogic. Whenever i start the emctl start oms, i get the following error
OMS version 11.1.0.1.0 is not compatible with repository version 10.2.0.4.0 Repository needs to be upgraded
Eventhough my db is 11, which is the emctl giving the above error? Its starting the EMGC admin and OMS server ( i can see them running in weblogic console), but my EM console is not coming up, saying either WLS or OMS is down.
i have tried to recreate repos db, droped and created it, but no luck.
Appreciate any pointers. Also, if there is a sequence of steps to follow the grid contol uninstall and install, pls let me know.

thx for the post. I had a successful install and I then logged on to the EM console and configured it to monitor the db instances. After a few days, the server restarted and after which i wasn't able to start the OMS and hence unable to logon to EM console.

Monitoring a 9.2.0.3 database instance in Grid Control 11gR1

Hi,
we configured EM Grid Control 11gR1 for monitoring some database instances. The monitoring works fine for the versions 9.2.0.1, 10.2.0.4 and 11gR2 , but we cannot configure it for version 9.2.0.3 and version 9.2.0.6.
The main page of 9.2.0.3 and 9.2.0.6 instances reports "Metric Collection Error" and every configuration (with Statspack or without, enable metrics or disable them) gives the same message.
I know that EM 11R1 is certified only for 9.2.0.8 but it seems strange that it works for version 9.2.0.1 (even if most features are disabled) and it don't works for the others 9.2 versions.
Someone has the same issue? Any suggestion ?
Thank you for your help.
Alex

Hello,
can you verify if the DBSNMP account is accessible (e.g. account is not locked).
Please have a look at Note:340158.1 for some debugging information around this error.
Regards,
Frank

Cannot install Grid control 11g because of repository creation failure

I cannot install Grid control 11g (on AIX6.1 and 11.2.0.1 database) because of repository creation failure with following log emschema.log.CREATE
2012-10-29 17:44:49,729 [Thread-190] ERROR emschema.17oypu8dqqrf7 - ERROR:FATAL Configuration Exceptions
Execution Exception
null
2012-10-29 17:44:50,162 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
2012-10-29 17:44:50,163 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - java.lang.Exception: The last RCUModel exit status code is not SUCCEEDED.
2012-10-29 17:44:50,164 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
2012-10-29 17:44:50,167 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Running RCU Failed with Exception Trace
The last RCUModel exit status code is not SUCCEEDED.
and rcu.log:
RCU Logfile               : /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/rcu.log
RCU Checkpoint Object               : /opt/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component               Status     Logfile
EM Repository Creation Configuration          Failed     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_config.log
EM Repository Init Configuration          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_init.log
EM Repository Common          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_common.log
2012-10-29 17:44:49.887 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: Repository Creation Utility - Create : Operation Completed
Database has 11.2.0.1 version and setup according installation guide(init parameters and so on...), what's wrong?
Edited by: mariok on Oct 31, 2012 2:11 AM

In install guide is written: http://docs.oracle.com/cd/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
„No environment variable specific to Enterprise Manager Grid Control needs to be set prior to installation. The ORACLE_HOME and ORACLE_SID variables should not be set; Oracle directories should not appear in the PATH.“
When I'v set up following variables everything went fine:
ORACLE_HOME=/opt/oracle/product64/11.2.0.1
ORACLE_SID=UAGRID
PATH=/usr/java6_64/bin:/opt/oracle/product64/11.2.0.1/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/lbin:/root/MSP/bin:.:/usr/local/bin:/u1/oracle/SCRIPTS:/opt/oracle/product64/11.2.0.1/OPatch

Error while installing Grid control on XP-32bits

Bonjour,//hello
Je vais avoir besoin d'un petit coup de main.//I need help.
J'ai installé le grid control 10.2.0.1 sur une machine XP 32bits x86 et j'ai un pb pour démarrer mon serveur http.
//I have installed grid control 10.2.0.1 on XP windows 32 bits, I have a error message when I try to start HTTP_Server process.
Je lance la commande :
//I launch the command :
opmnctl startproc ias-component=HTTP_Server
et j'ai le message d'erreur :
//and I get the error message :
=====================================================================
opmn id=acer_jojo:6201
0 of 1 processes started.
ias-instance id=EnterpriseManager0.acer_jojo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3236)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
Log of HTTP_Server~1:
[Mon Feb 15 15:34:22 2010] [warn] pid file c:/oraclehomes/oms10g/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Mon Feb 15 15:34:22 2010] [error] mod_ossl: Init: Server acer_jojo:1159: SSL setup failed: call to nzos_OpenWallet returned error 28750
[Mon Feb 15 15:34:22 2010] [error] mod_ossl: Unknown error
Log of C:\%ORACLE_HOME%\Apache\Apache\logs\ssl_engine_log :
[17/févr./2010 07:39:16 04480] [warn] Init: (acer_jojo:1159) SSL setup warning: the use of SSLWalletPassword is deprecated and will not be supported in a future release. Please use auto-login enabled wallets! Refer to your administrator guide for more details.
[17/févr./2010 07:39:16 04480] [error] Init: Server acer_jojo:1159: SSL setup failed: call to nzos_OpenWallet returned error 28750
[17/févr./2010 07:39:16 04480] [error] Unknown error
Thx for your help!
Merci si vous pouvez m'aider !

Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

Grid Control 11GR1 and Weblogic Server

Am looking doing a new install of grid control 11gR1 on windows server 2008. I'm not all that familiar with the weblogic server. Can this be installed on the same server that Grid Control is running from?

Hello,
I'm not all that familiar with the weblogic server. Can this be installed on the same server that Grid Control is running from?Yes, you can. For OEM Grid Control 11gR1, you'll have to install WLS 10.3.2 and apply the Patch WDJ7.
You'll have more details on the following Notes of My Oracle Support:
How to Install Web Logic Server 10.3.2 for Installing 11g Grid Control [ID 1063762.1]
How to Download and Apply recommended WLS patch (WDJ7) on WLS home for 11g Grid Control Install/Upgrade [ID 1072763.1]Hope this help.
Best regards,
Jean-Valentin

Installing Grid Control on uncertified CentOS system

I'm trying to install Grid Control 10g on a CentOS machine. I realize that centos is not supported, but isn't there a way to get around the dependency checks?
I already tried the hack of adding "redhat-5" to the [Certified Versions] section of the oraparam.ini file (as outlined here: Re: Oracle 10g won't isntall on Enterprise Lunix OS ) and that gets me past the initial check, but eventually the install fails with the following:
./runInstaller -silent -responseFile=/u01/app/oracle/software/grid/em_with_new_db.rsp -waitforcompletion -paramFile /u01/app/oracle/software/grid/oraparam.ini
Performing check for CertifiedVersions
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-8,SuSE-9
Actual Result: redhat-CentOS release 5 (Final)
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Oracle EnterPrise Manager 10gR2 is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.Isn't there a way to trick the install into proceeding?

Did you ever get Oracle Grid Control installed on your CentOS machine? I am trying to install using the -ignoreSysPrereqs flag, but run into issues during the OMS and AGENT configurations.

Installing Grid Control and managing DBs on desktop

I want to install Grid Control, and manage DB on my own testing environment on desktops...I tried one time to install Grid Control on my desktop i become very slow. Now i am thinking to buy new Desktop dedicated for Grid Control only and see how it goes...any suggestions?
2nd how i can access my DB on the other desktop? Like i should install agents on that...and how to configure....

When teaching this class I typically have 6 pairs of students sharing a single P4 3Ghz with 4Gb of RAM gridserver. (combined 10.1.0.4 emrep with single OMS on RH 3 AS)
THis is more than enough for the 150 or so targets that we configure during class
The agents are deployed in any of several methods.(the install DVD is probabally the easiest for 1's and 2's) If you are monitoring a db expect to use about 150Mb of RAM for the agent. After setting up the agent ensure that your computer has local security policy configured so that "Login as Batch" is enabled for the user account that will be used for authentication to the desktop. (this also means that you need to have a windows password configured for that account as well).
The database configuration is semi-automatic once you have the agent installed on the desktop (it's called discovery)

Error while installing Grid Control 12c (ERROR STREAM: *sys-package-mgr*: skipping bad jar)

Hi all,
   OS: OEL 6.3 64 bits
   DB: 11.2.0.3
   Grid: 12.1
   While installing Grid Control 12c, the following error appears to me:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2013-07-04_11-12-49-PM
INFO: The ARU ID found in shiphomeproperties.xml file is 226
INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java   -d64 -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls -log_priority=debug
INFO: Extracting 0%....................................................................................................100%
INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
INFO: #
INFO: # A fatal error has been detected by the Java Runtime Environment:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
INFO: #
INFO: # JRE version: 6.0_24-b50
INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
INFO: # Problematic frame:
INFO: # C [libc.so.6+0x89cdc]
INFO: #
INFO: # An error report file with more information is saved as:
INFO: # /tmp/hs_err_pid24834.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: #   http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
INFO: Return value is 134
INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
   The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
   Thanks in advance.

Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

Install Grid Control on Solaris

Hi all,
I am trying to install grid control 10g release 4 onto my database homer.
It bounces back with an error:
==========================================================
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.9
Passed
Checking Temp space: must be greater than 250 MB. Actual 4279 MB Passed
Checking swap space: must be greater than 500 MB. Actual 5542 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY v
ariable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
=============================================================
i have tried searching within the otn & metalink. was not able to find any solutions.
regards
Susan John

Hi Susan
Are you using a X11 emulator like Exceed ?
Or let me know if you are using another X11 emulator.
then try this:
Solution Description
Exceed 6.0.1:
- Run Xconfig (Start->Programs->Exceed->Xconfig)
- Double-Click "Video"
- Set
Server Visual: PseudoColor
- Reset Server as proposed by Xconfig
Exceed 7.1.0:
- Run Xconfig (Start->Programs->Hummingbird Connectivity V7.1->Exceed->Xconfig)
- Double-Click "Screen Definition"
- Set
Server Visual: PseudoColor
- Click OK
- Double-Click "Protocol"
- Uncheck "Use 32 Bits Per Pixel For TrueColor"
- Reset Server as proposed by Xconfig
Otherwise directly on Solaris please control that :
Check if the monitor has minimum 256 color.
Run the following command from the Operating System command line
COLOR=`/usr/openwin/bin/xwininfo -root 2>&1`
if [ `echo $COLOR | grep -i depth | awk '$2>=8 {print "good"}' | grep -c "good" ` -ge 1 ]
then
echo "Adequate"
elif test -z "$DISPLAY"
then
echo "DISPLAY is not set"
elif [ `echo $COLOR | grep unable | wc -l` -ge 1 ]
then
echo "Cannot open DISPLAY"
else
echo "Need at least 256 colors"
fi
Edited by: Hub on Oct 29, 2008 11:50 PM
Are you able to use
/usr/openwin/bin/xdpyinfo
what's the result of that command?
Are you able to open xterm or xclock without any issues?
Edited by: Hub on Oct 30, 2008 12:00 AM

Install Grid Control and use repository within a DataGuard configuration

Hello,
I need some information if anyone has experience in the following
We have severel database running in DataGuard standby configuration.
I want to install OMS 11.1 and use the repository in a primary and standby configuration.
My configuration will look like this:
host 1     Primary Repository database
     OMS service 1
host 2     Standby Repository database
     OMS service 2
During normal operation i want to have 2 OMS services running.
Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
Can this be a working configuration?
Any help is appreciated.
Regards,
Ben

Hi.
As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
Good luck.
rgds
Kjell Ove

System not started after installing grid control

HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>

Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot?

Trouble with 10g after Installing Grid Control

Main problem: after installing Grid Control and rebooting, I can no longer access my databases.
I have 10g installed on a fairly decent Windows XP machine. It was running okay, but I had two Oracle database instance processes running at 200mb of RAM each (of a total of 1 GB of RAM), so it was a bit bogged down, as is to be expected when running Oracle as a server on Windows.
I then installed Grid Control, which seemed to go okay, and another database as well. But once the install completed, and I gained access to the Grid Control version of the OEM for the first time, that's when things got wacky. Connecting to any OEM instance started taking anywhere from 2-10 minutes, everything was bogged down considerably, etc. I tried shutting everything down and rebooting, but now things are worse. OEM is timing out and not finding servers, listener is timing out, etc. I've tried manipulating a few things in Net Manager (I noticed that my LISTENER section didn't seem to contain any data at all, and my databases weren't listed in there either) with no result.
I've also had trouble with "host credentials" and being able to administer the databases within the OEM, even after implementing a fix I had found to add my user name to a "log on as batch job" local security policy.
Finally, I noticed that after installing Grid Control, when I run "sqlplus", I now see "Oracle91 Enterprise Edition" instead of the "Oracle10g" it used to show (and I never had anything but 10g installed on this machine!).
Here's what happens when I try to access my dBs:
-When I try to launch the OEM connected to any of the 3 databases I created (which were previsouly running), the browser just times out with "page cannot be displayed".
-When I run "emctl start <ANYTHING>" I get file/path not found errors, and a file path with both forward and backward slashes (starting after the "agent" directory):
C:\oracle\product\10.1.0\agent/<...etc.>
-When I try to test a connection to a service in Net Manager, I get this error:
ORA-12557: TNS:protocol adapter not loadable
I had to manually add my listener info and databases info(under Service Naming) in Net Manager, but everything appeared fine in Oracle Directory Manager (unfortunately, that doesn't help much, since this is just a general info tool).
I am nothing near a DBA and my knowledge is limited, so I apologize for not being more consise, but I'd be glad to elaborate if someone could tell me what they need to know.
Thank you,
John

Yes; thank you both. Although I had 1 GB physical and 1.5 GB virtual memory configured, running Grid Control seemed to completely kill all available resources.
I have removed GC and its related database and applications, and I can again conncet to my databases via Database Control. Thank you.
By the way, another issue has arisen, seemingly in the aftermath of installing GC: my OEM Database Control instances now time out after about 60 seconds, logging me out each and every time. I have cookies enabled, but this doesn't seem to be the trouble. Is there a Web setting somewhere that will kick users out of the instance at timed intervals?

Package needed installing Grid Control 11g

Hi , I'm installing Grid Control 11g on RHEL5 and for installing yast package I need a pre-requirement of package called ( Checking boost ....... not found ). Where I can find this package ?
Thanks
[root@mygrid yast_el5_x86_64]# ./install.sh
Now checking the necessary rpms...........
Checking dbus ....... found
Checking hal ....... found
Checking perl ....... found
Checking coreutils ....... found
Checking curl ....... found
Checking unzip ....... found
Checking tar ....... found
Checking gzip ....... found
Checking glibc-common ....... found
Checking initscripts ....... found
Checking cracklib ....... found
Checking perl-Digest-SHA1 ....... found
Checking boost ....... not found
Now checking the necessary tools...........
Checking /bin/bash ....... found
Checking /bin/ln ....... found
Checking /bin/mktemp ....... found
Checking /bin/rm ....... found
Checking /bin/sed ....... found
Checking /bin/sh ....... found
Checking /sbin/ldconfig ....... found
Checking /usr/bin/env ....... found
Checking /usr/bin/find ....... found
Checking /usr/bin/host ....... found
Checking /usr/bin/perl ....... found
Checking /usr/bin/python ....... found
Checking /usr/bin/xargs ....... found
Checking /usr/sbin/lsof ....... found
The following requirements aren't found.
boost
Some requirements are not statisfied, please install them first. Or use system-config-packages to adjust OS installation and make sure that Development Tools, Authoring and Publishing, Server, Legacy Software Development are selected!
[root@mygrid yast_el5_x86_64]#

Hi,
This might help, test in your development first
http://rpm.pbone.net/index.php3/stat/21/year/2007/month/03/day/21
Cheers

Error installing Grid Control 11g

Hi. I'm trying to install Grid Control 11g without success.
I'm using SuSe Enterprise 10 sp3, already installed weblogic 10.3.2 and created a database instance for repository without problems.
The installation process fails when reaches the 'OMS configuration' step. Here's the last part of the omsca log file (log says to check the 'omsca_20110209122055.log' file for more info, but it points to itself):
FINA: Stopped WebTier successfully.
09-feb-2011 12:45:16 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINA: Cleaning up instance directory: /home/oracle/gc_inst/user_projects
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINA: Cleaning up instance home directory: /home/oracle/gc_inst/em
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINA: Succesfully deleted the oms
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINA: The value of infra setup completion is :true
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINA: Cleaning the OMS from the repository
09-feb-2011 12:45:51 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINA: Got the Host URL as: null
09-feb-2011 12:45:51 oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
GRAVE: OMSCA-ERR: Fallo de protección de OMS. Consulte el archivo de rastreo:/home/oracle/middleware_home/oms11g/cfgtoollogs/omsca/omsca_20110209122055.log
09-feb-2011 12:45:51 oracle.sysman.omsca.framework.OMSCAFreshInstall execute
GRAVE: Securing of OMS failed.
09-feb-2011 12:45:51 oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINA: Got resultfalse
Thanks for your help.

Here it is:
FINA: Properties: {ListenAddress=consolaoracle.indra.es,ListenPort=7403,NodeManagerHome=/home/oracle/middleware_home/wlserver_10.3/common/emnodemanager20110209122055,StartScriptEnabled=true,StartScriptName=startEMServer.sh,}
09-feb-2011 12:21:55 oracle.sysman.omsca.util.ProcessOutputReader run
FINA: Command: /usr/local/jdk1.6.0_18/jre/bin/java -classpath /usr/local/jdk1.6.0_18/jre/lib/rt.jar:/usr/local/jdk1.6.0_18/jre/lib/i18n.jar:/home/oracle/middleware_home/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/local/jdk1.6.0_18/lib/tools.jar:/home/oracle/middleware_home/utils/config/10.3/config-launch.jar:/home/oracle/middleware_home/wlserver_10.3/server/lib/weblogic_sp.jar:/home/oracle/middleware_home/wlserver_10.3/server/lib/weblogic.jar:/home/oracle/middleware_home/modules/features/weblogic.server.modules_10.3.2.0.jar:/home/oracle/middleware_home/wlserver_10.3/server/lib/webservices.jar:/home/oracle/middleware_home/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/home/oracle/middleware_home/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/home/oracle/middleware_home/oms11g/sysman/jlib/emConfig.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jrf_11.1.1/jrf-api.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jrf-wlst.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.odl_11.1.1/ojdl2.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.dconfig-infra_11.1.1.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.webservices_11.1.1/orawsdl.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.webservices_11.1.1/mdds.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.webservices_11.1.1/ws_confmbeans.jar:/home/oracle/middleware_home/oracle_common/modules/org.apache.commons.digester_1.7.jar:/home/oracle/middleware_home/oracle_common/../modules/javax.xml.bind_2.1.1.jar:/home/oracle/middleware_home/oracle_common/../modules/javax.activation_1.1.jar:/home/oracle/middleware_home/oracle_common/../modules/javax.xml.stream_1.1.1.0.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.http_client_11.1.1.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.dconfigbeans_11.1.1.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/adflogginghandler.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/adfsharembean.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/auditwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/sslconfigwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/oamap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/ossoiap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jps-wlst.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-mbeans.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-upgrade.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-patching.jar:/home/oracle/middleware_home/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/lib/mdswlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/auditwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jps-wlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jrf-wlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/oamap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/ossoiap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/ossoiap.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/sslconfigwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/wsm-wlst.jar:/home/oracle/middleware_home/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/home/oracle/middleware_home/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/home/oracle/middleware_home/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar weblogic.NodeManager -v
09-feb-2011 12:21:57 oracle.sysman.omsca.util.ProcessOutputReader run
FINA: NMProcess: <09-feb-2011 12:21:56> <INFO> <Loading domains file: /home/oracle/middleware_home/wlserver_10.3/common/emnodemanager20110209122055/nodemanager.domains>
09-feb-2011 12:21:57 oracle.sysman.omsca.util.ProcessOutputReader run
...

Installing Grid Control 11gR1 - certified component combinations

Similar Messages

Maybe you are looking for