Installing Grid Control - new instance - then db server?

Linux 64 bit system. We plan to dual purpose a Grid control instance on the same Linux server as a reporting database server, running Oracle 10g 10.2.0.4, GC at 10.2.0.5 (the reporting db may or may not be managed under this grid control instance - other servers will have agents deployed to be managed by this Grid control instance). Neither have yet been installed. I'd prefer to have Grid Control running on it's own instance completely separate from the reporting database, in separate homes. Is this possible? Also, would it be better to install Grid control first, in its own home, then install the other database instance in it's own home? Or vice-versa? Or does it matter? If there's a document or note that covers this, I would be most appreciative if someone could point me to it.
Thanks!
Kelly

The Grid Control Repository database can be in the Same HOME as the OMS, however the database version for the GC repository may not be the version you want. I almost always setup a HOME for my grid control respository database sep. from my OMS home. This serves 2 purposes. 1 the security patches for my database and my database version can be kept up to date sep. from my OMS. Also allows me to sep the OMS from the database onto different servers much easier later.
I would recommend using a sep ORACLE_HOME for GC repository database from the OMS. This has made my life simplier in the past as the database version in the OMS binaries is usually a few revisions behind and I like to keep my DBs on the latest patch set for support purposes.
The means that your server will have 3 homes
1 for GC Repoistory Database
1 for Reporting database
1 for OMS
At least this is the way I would do it, unless really stapped for disk space for the additional homes.

Similar Messages

Install grid control 10g Server 2003

Hello all;
I have installed Oracle Grid control 10G on my PC ( server 2003 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
the file OMS_HOST/sysman/logs/emoms.log
2011-04-04 09:30:20,250 [Thread-18] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2011-04-04 09:30:20,250 [Thread-18] ERROR em.notification unregisterOMS.1417 - Error unregistering: Exception d'E/S: SO Exception was generated
java.sql.SQLException: Exception d'E/S: SO Exception was generated
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1331)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:422)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:178)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:158)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
     at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
     at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
     at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1303)
     at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
     at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
     at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
     at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:851)
     at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5980)
     at com.evermind.server.http.HttpSite.destroy(HttpSite.java:936)
     at com.evermind.server.http.HttpServer.destroy(HttpServer.java:632)
     at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2102)
     at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
     at java.lang.Thread.run(Thread.java:534)
the file installAction.log
Start Processing configuration tool Enterprise manager Website Configuration Assistant ....
Preparing for copying C:\OracleHomes\oms10g\sysman\log\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\sysman\log\*
Adding the file C:\OracleHomes\oms10g\sysman\log\emctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\pafLogs from the file path expanding...
Completed copying file C:\OracleHomes\oms10g\sysman\log\emctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.trc to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.trc
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.log to C:\OracleHomes\oms10g\cfgtoollogs\emoms.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.trc to C:\OracleHomes\oms10g\cfgtoollogs\emoms.trc
Number of file(s) copied is 5
Number of directories copied is 0
End Processing configuration tool Enterprise manager Website Configuration Assistant
Start Processing configuration tool DCM Repository Backup Assistant ....
Preparing for copying C:\OracleHomes\oms10g\dcm\logs\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\dcm\logs\*
Adding the file C:\OracleHomes\oms10g\dcm\logs\daemon_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\dcmctl_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\emd_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Backup Assistant
INFO: Le script "C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" contient toutes les commandes qui ont échoué, ou qui ont été ignorées ou annulées. Ce fichier peut servir à exécuter ces assistants de configuration en dehors d'OUI. Vous pouvez être amené à mettre à jour ce script avec les mots de passe (éventuels) avant de l'exécuter.
INFO: Created a new file C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands.bak
INFO: Created a new file C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031 : Echec de certains assistants de configuration. Il est vivement recommandé de les relancer immédiatement. Une exécution incorrecte d'un assistant marqué comme Recommandé signifie que le système est mal configuré.
1. Dans le panneau Détails de l'écran de l'assistant de configuration, consultez les erreurs à l'origine des échecs détectés.
2. Corrigez ces erreurs.
3. Sélectionnez les assistants ayant échoué et cliquez sur le bouton Réessayer pour les relancer.
INFO: Sélection utilisateur : Oui/OK
file hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.195 srvmid1.com.tn srvmid1
please you ca help me...

Check if the last post in http://cn.forums.oracle.com/forums/thread.jspa?threadID=477659&tstart=0&start=15 can be the solution for you. Remember, the error is in the last step of the configuration process. So it only concerns the agent. The OMS and OMR were (as I see it) correctly configured.
Eric

Trouble with 10g after Installing Grid Control

Main problem: after installing Grid Control and rebooting, I can no longer access my databases.
I have 10g installed on a fairly decent Windows XP machine. It was running okay, but I had two Oracle database instance processes running at 200mb of RAM each (of a total of 1 GB of RAM), so it was a bit bogged down, as is to be expected when running Oracle as a server on Windows.
I then installed Grid Control, which seemed to go okay, and another database as well. But once the install completed, and I gained access to the Grid Control version of the OEM for the first time, that's when things got wacky. Connecting to any OEM instance started taking anywhere from 2-10 minutes, everything was bogged down considerably, etc. I tried shutting everything down and rebooting, but now things are worse. OEM is timing out and not finding servers, listener is timing out, etc. I've tried manipulating a few things in Net Manager (I noticed that my LISTENER section didn't seem to contain any data at all, and my databases weren't listed in there either) with no result.
I've also had trouble with "host credentials" and being able to administer the databases within the OEM, even after implementing a fix I had found to add my user name to a "log on as batch job" local security policy.
Finally, I noticed that after installing Grid Control, when I run "sqlplus", I now see "Oracle91 Enterprise Edition" instead of the "Oracle10g" it used to show (and I never had anything but 10g installed on this machine!).
Here's what happens when I try to access my dBs:
-When I try to launch the OEM connected to any of the 3 databases I created (which were previsouly running), the browser just times out with "page cannot be displayed".
-When I run "emctl start <ANYTHING>" I get file/path not found errors, and a file path with both forward and backward slashes (starting after the "agent" directory):
C:\oracle\product\10.1.0\agent/<...etc.>
-When I try to test a connection to a service in Net Manager, I get this error:
ORA-12557: TNS:protocol adapter not loadable
I had to manually add my listener info and databases info(under Service Naming) in Net Manager, but everything appeared fine in Oracle Directory Manager (unfortunately, that doesn't help much, since this is just a general info tool).
I am nothing near a DBA and my knowledge is limited, so I apologize for not being more consise, but I'd be glad to elaborate if someone could tell me what they need to know.
Thank you,
John

Yes; thank you both. Although I had 1 GB physical and 1.5 GB virtual memory configured, running Grid Control seemed to completely kill all available resources.
I have removed GC and its related database and applications, and I can again conncet to my databases via Database Control. Thank you.
By the way, another issue has arisen, seemingly in the aftermath of installing GC: my OEM Database Control instances now time out after about 60 seconds, logging me out each and every time. I have cookies enabled, but this doesn't seem to be the trouble. Is there a Web setting somewhere that will kick users out of the instance at timed intervals?

Error while installing Grid control on XP-32bits

Bonjour,//hello
Je vais avoir besoin d'un petit coup de main.//I need help.
J'ai installé le grid control 10.2.0.1 sur une machine XP 32bits x86 et j'ai un pb pour démarrer mon serveur http.
//I have installed grid control 10.2.0.1 on XP windows 32 bits, I have a error message when I try to start HTTP_Server process.
Je lance la commande :
//I launch the command :
opmnctl startproc ias-component=HTTP_Server
et j'ai le message d'erreur :
//and I get the error message :
=====================================================================
opmn id=acer_jojo:6201
0 of 1 processes started.
ias-instance id=EnterpriseManager0.acer_jojo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3236)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
Log of HTTP_Server~1:
[Mon Feb 15 15:34:22 2010] [warn] pid file c:/oraclehomes/oms10g/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Mon Feb 15 15:34:22 2010] [error] mod_ossl: Init: Server acer_jojo:1159: SSL setup failed: call to nzos_OpenWallet returned error 28750
[Mon Feb 15 15:34:22 2010] [error] mod_ossl: Unknown error
Log of C:\%ORACLE_HOME%\Apache\Apache\logs\ssl_engine_log :
[17/févr./2010 07:39:16 04480] [warn] Init: (acer_jojo:1159) SSL setup warning: the use of SSLWalletPassword is deprecated and will not be supported in a future release. Please use auto-login enabled wallets! Refer to your administrator guide for more details.
[17/févr./2010 07:39:16 04480] [error] Init: Server acer_jojo:1159: SSL setup failed: call to nzos_OpenWallet returned error 28750
[17/févr./2010 07:39:16 04480] [error] Unknown error
Thx for your help!
Merci si vous pouvez m'aider !

Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

Does any one success to install Grid control 11G (OEL x86_64)/Virtualbox

Hi all,
I'm trying since 4 days to install Grid Control 11G with these following specifications:
1) Weblogic 10.3.2 (OK)
2) Database Repository (11.2.0.2) OK
3) Java version : /usr/java/jdk1.6.0_18
4) Operating System Oracle Linux x86_64
And the last news: all this under Virtualbox
Some one can share his experience with us for this purpose.
Thanks in advance
Edited by: 878681 on Aug 12, 2011 4:54 AM

Thanks a lot of,
following extraction from trace file specified:
NB: after each try, the OMS configuration falied with the same error without giving more information.... :-)
I can send the file but i dont khow if it's possible to attach file in this forum...
==================================================================
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Cleaning EM Setup
Script dir: /u01/app/oracle/weblogic/oms11g/sysman/omsca/scripts/wls
Admin host name:gc
Admin https port is:7101
Managed server name is:7403
Admin Server user is:weblogic
Node Manager user is:nodemanager
Mode Passed is:new
Startup mode is:FALSE
managed server name is:EMGC_OMS1
managed server host is:gc
domain name is:GCDomain
machine name is:EMGC_MACHINE1
complete cleanup is:true
Loading the common properties
Loading commen def file
Fri Aug 12 00:57:34 CEST 2011
Fetching oracleHome
Fri Aug 12 00:57:34 CEST 2011
Oracle Home is:/u01/app/oracle/weblogic/oms11g
Fri Aug 12 00:57:34 CEST 2011
Fetching common oracle home
Fri Aug 12 00:57:34 CEST 2011
common oracle home is:/u01/app/oracle/weblogic/oracle_common
Fri Aug 12 00:57:34 CEST 2011
Fetching domain_home
Fri Aug 12 00:57:34 CEST 2011
Domain Home is:/u01/app/oracle/gc_inst/user_projects/domains/GCDomain
Fri Aug 12 00:57:34 CEST 2011
Fetching weblogic Home
Fri Aug 12 00:57:34 CEST 2011
weblogic home is:/u01/app/oracle/weblogic/wlserver_10.3
Fri Aug 12 00:57:34 CEST 2011
node manager home is:/u01/app/oracle/weblogic/wlserver_10.3/common/emnodemanager20110811233403
Fri Aug 12 00:57:34 CEST 2011
admin template location is:/u01/app/oracle/weblogic/wlserver_10.3/common/templates/domains/wls.jar
Fri Aug 12 00:57:34 CEST 2011
Done Fetching passwords
Fri Aug 12 00:57:35 CEST 2011
Done Loading the start Domain routines
Fri Aug 12 00:57:35 CEST 2011
stopManagedServer: Checking Managed server status
Connecting to Node Manager ...
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Successfully Connected to Node Manager.
STARTING
Already connected to a Node Manager
RUNNING
Killing server EMGC_ADMINSERVER ...
Successfully killed server EMGC_ADMINSERVER ...
Already connected to a Node Manager
Stopped NodeManager successfully
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Done Executing the command...0
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.framework.OMSGenericAdapter deleteAddOnInventory
INFO: Invoking deleteAddOnInventory for oms EMGC_OMS1
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.framework.OMSGenericAdapter deleteAddOnInventory
INFO: Deleting plugin inventory for GCDomain_EMGC_OMS1
Aug 12, 2011 12:58:28 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Stopping WebTier
Aug 12, 2011 12:58:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Stopped WebTier successfully.
Aug 12, 2011 12:58:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Cleaning up instance directory: /u01/app/oracle/gc_inst/user_projects
Aug 12, 2011 12:59:51 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Cleaning up instance home directory: /u01/app/oracle/gc_inst/em
Aug 12, 2011 1:00:56 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Succesfully deleted the oms
Aug 12, 2011 1:00:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: The value of infra setup completion is :true
Aug 12, 2011 1:00:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Cleaning the OMS from the repository
Aug 12, 2011 1:01:20 AM oracle.sysman.omsca.framework.OMSGenericAdapter getOMS
FINE: Got hostURL: gc:4889_Management_Service
Aug 12, 2011 1:01:21 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Got the Host URL as: gc:4889_Management_Service
Aug 12, 2011 1:01:21 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Cleaning the OMS from the repository
Aug 12, 2011 1:01:32 AM oracle.sysman.omsca.framework.OMSGenericAdapter cleanupRepository
FINE: Got hostURL: gc:4889_Management_Service
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Succesfully cleaned the OMS from repository
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
SEVERE: OMSCA-ERR:Securing of OMS failed. Check the trace file:/u01/app/oracle/weblogic/oms11g/cfgtoollogs/omsca/omsca_20110811233403.log
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
SEVERE: Securing of OMS failed.
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Got resultfalse
=============================================================

Error while installing Grid Control 12c (ERROR STREAM: *sys-package-mgr*: skipping bad jar)

Hi all,
   OS: OEL 6.3 64 bits
   DB: 11.2.0.3
   Grid: 12.1
   While installing Grid Control 12c, the following error appears to me:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2013-07-04_11-12-49-PM
INFO: The ARU ID found in shiphomeproperties.xml file is 226
INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java   -d64 -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls -log_priority=debug
INFO: Extracting 0%....................................................................................................100%
INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
INFO: #
INFO: # A fatal error has been detected by the Java Runtime Environment:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
INFO: #
INFO: # JRE version: 6.0_24-b50
INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
INFO: # Problematic frame:
INFO: # C [libc.so.6+0x89cdc]
INFO: #
INFO: # An error report file with more information is saved as:
INFO: # /tmp/hs_err_pid24834.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: #   http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
INFO: Return value is 134
INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
   The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
   Thanks in advance.

Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

Install Grid Control on Solaris

Hi all,
I am trying to install grid control 10g release 4 onto my database homer.
It bounces back with an error:
==========================================================
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.9
Passed
Checking Temp space: must be greater than 250 MB. Actual 4279 MB Passed
Checking swap space: must be greater than 500 MB. Actual 5542 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY v
ariable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
=============================================================
i have tried searching within the otn & metalink. was not able to find any solutions.
regards
Susan John

Hi Susan
Are you using a X11 emulator like Exceed ?
Or let me know if you are using another X11 emulator.
then try this:
Solution Description
Exceed 6.0.1:
- Run Xconfig (Start->Programs->Exceed->Xconfig)
- Double-Click "Video"
- Set
Server Visual: PseudoColor
- Reset Server as proposed by Xconfig
Exceed 7.1.0:
- Run Xconfig (Start->Programs->Hummingbird Connectivity V7.1->Exceed->Xconfig)
- Double-Click "Screen Definition"
- Set
Server Visual: PseudoColor
- Click OK
- Double-Click "Protocol"
- Uncheck "Use 32 Bits Per Pixel For TrueColor"
- Reset Server as proposed by Xconfig
Otherwise directly on Solaris please control that :
Check if the monitor has minimum 256 color.
Run the following command from the Operating System command line
COLOR=`/usr/openwin/bin/xwininfo -root 2>&1`
if [ `echo $COLOR | grep -i depth | awk '$2>=8 {print "good"}' | grep -c "good" ` -ge 1 ]
then
echo "Adequate"
elif test -z "$DISPLAY"
then
echo "DISPLAY is not set"
elif [ `echo $COLOR | grep unable | wc -l` -ge 1 ]
then
echo "Cannot open DISPLAY"
else
echo "Need at least 256 colors"
fi
Edited by: Hub on Oct 29, 2008 11:50 PM
Are you able to use
/usr/openwin/bin/xdpyinfo
what's the result of that command?
Are you able to open xterm or xclock without any issues?
Edited by: Hub on Oct 30, 2008 12:00 AM

Install Grid Control and use repository within a DataGuard configuration

Hello,
I need some information if anyone has experience in the following
We have severel database running in DataGuard standby configuration.
I want to install OMS 11.1 and use the repository in a primary and standby configuration.
My configuration will look like this:
host 1     Primary Repository database
     OMS service 1
host 2     Standby Repository database
     OMS service 2
During normal operation i want to have 2 OMS services running.
Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
Can this be a working configuration?
Any help is appreciated.
Regards,
Ben

Hi.
As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
Good luck.
rgds
Kjell Ove

Error installing Grid Control 11g

Hi. I'm trying to install Grid Control 11g without success.
I'm using SuSe Enterprise 10 sp3, already installed weblogic 10.3.2 and created a database instance for repository without problems.
The installation process fails when reaches the 'OMS configuration' step. Here's the last part of the omsca log file (log says to check the 'omsca_20110209122055.log' file for more info, but it points to itself):
FINA: Stopped WebTier successfully.
09-feb-2011 12:45:16 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINA: Cleaning up instance directory: /home/oracle/gc_inst/user_projects
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINA: Cleaning up instance home directory: /home/oracle/gc_inst/em
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINA: Succesfully deleted the oms
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINA: The value of infra setup completion is :true
09-feb-2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINA: Cleaning the OMS from the repository
09-feb-2011 12:45:51 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINA: Got the Host URL as: null
09-feb-2011 12:45:51 oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
GRAVE: OMSCA-ERR: Fallo de protección de OMS. Consulte el archivo de rastreo:/home/oracle/middleware_home/oms11g/cfgtoollogs/omsca/omsca_20110209122055.log
09-feb-2011 12:45:51 oracle.sysman.omsca.framework.OMSCAFreshInstall execute
GRAVE: Securing of OMS failed.
09-feb-2011 12:45:51 oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINA: Got resultfalse
Thanks for your help.

Here it is:
FINA: Properties: {ListenAddress=consolaoracle.indra.es,ListenPort=7403,NodeManagerHome=/home/oracle/middleware_home/wlserver_10.3/common/emnodemanager20110209122055,StartScriptEnabled=true,StartScriptName=startEMServer.sh,}
09-feb-2011 12:21:55 oracle.sysman.omsca.util.ProcessOutputReader run
FINA: Command: /usr/local/jdk1.6.0_18/jre/bin/java -classpath /usr/local/jdk1.6.0_18/jre/lib/rt.jar:/usr/local/jdk1.6.0_18/jre/lib/i18n.jar:/home/oracle/middleware_home/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/local/jdk1.6.0_18/lib/tools.jar:/home/oracle/middleware_home/utils/config/10.3/config-launch.jar:/home/oracle/middleware_home/wlserver_10.3/server/lib/weblogic_sp.jar:/home/oracle/middleware_home/wlserver_10.3/server/lib/weblogic.jar:/home/oracle/middleware_home/modules/features/weblogic.server.modules_10.3.2.0.jar:/home/oracle/middleware_home/wlserver_10.3/server/lib/webservices.jar:/home/oracle/middleware_home/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/home/oracle/middleware_home/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/home/oracle/middleware_home/oms11g/sysman/jlib/emConfig.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jrf_11.1.1/jrf-api.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jrf-wlst.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.odl_11.1.1/ojdl2.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.dconfig-infra_11.1.1.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.webservices_11.1.1/orawsdl.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.webservices_11.1.1/mdds.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.webservices_11.1.1/ws_confmbeans.jar:/home/oracle/middleware_home/oracle_common/modules/org.apache.commons.digester_1.7.jar:/home/oracle/middleware_home/oracle_common/../modules/javax.xml.bind_2.1.1.jar:/home/oracle/middleware_home/oracle_common/../modules/javax.activation_1.1.jar:/home/oracle/middleware_home/oracle_common/../modules/javax.xml.stream_1.1.1.0.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.http_client_11.1.1.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.dconfigbeans_11.1.1.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/adflogginghandler.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/adfsharembean.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/auditwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/sslconfigwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/oamap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/ossoiap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jps-wlst.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-mbeans.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-upgrade.jar:/home/oracle/middleware_home/oracle_common/modules/oracle.jps_11.1.1/jps-patching.jar:/home/oracle/middleware_home/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/lib/mdswlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/auditwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jps-wlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/jrf-wlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/oamap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/ossoiap_help.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/ossoiap.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/sslconfigwlst.jar:/home/oracle/middleware_home/oracle_common/common/wlst/resources/wsm-wlst.jar:/home/oracle/middleware_home/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/home/oracle/middleware_home/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/home/oracle/middleware_home/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar weblogic.NodeManager -v
09-feb-2011 12:21:57 oracle.sysman.omsca.util.ProcessOutputReader run
FINA: NMProcess: <09-feb-2011 12:21:56> <INFO> <Loading domains file: /home/oracle/middleware_home/wlserver_10.3/common/emnodemanager20110209122055/nodemanager.domains>
09-feb-2011 12:21:57 oracle.sysman.omsca.util.ProcessOutputReader run
...

How to install Grid Control 10g Release 3?

Hello,
I need install Grid Control 10g Release 3 for Linux x86_64 on SUSE 9, and I need some tips about this instalation.
I need registry 3 database, 1 DB is 10g and the others are in 9.2.
Can I help me?
Thank's

If you installed the 64-bit SLES-9, you are on the only platform that has a full install of 10gR3 Grid Control available:
http://www.oracle.com/technology/software/products/oem/index.html
Everyone else must install 10gR2 fully, then patch up to 10gR3.
Run runInstaller to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
- Install the 10gR3 agent install on any additional servers that require monitoring.
Load and execute orarun to enable the correct kernel options if you not done so already. It can be downloaded from www.suse.com/oracle. Comment out any IPv6 entries from /etc/hosts. The O/S should be setup similar to the AS 10.1.2 install doc for SLES9:
http://ftp.novell.com/partners/oracle/docs/iAS10gR2_sles9_install.pdf

When to install Grid Control and when to just use 10g built in?

1. is Grid Control really the only way to Enterprise Manage multiple databases? (if not, how do i switch from different databases on the 10g built in EM)
2. I only have about 10 databases, is Grid Control overboard?
3. Is it a bad or good idea to install GC on the 10g server?
thanks,

Hi.
As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
Good luck.
rgds
Kjell Ove

OMS error during install Grid control 10gR2 on Windows 2003

He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanks

There are some guidelines here:
Subject:      OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
     Doc ID:      Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
     Doc ID:      Note:358640.1
~ Madrid.

Installing Grid Control -Where are binaries

I am trying to install Grid control in linux environment where i have only the database installed. I have download the following binaries to install Grid Control. But what i see, is that this is a patch to an existing Grid Installation.Where do i find the binaries for new installation for Grid Control?
http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html
Oracle Enterprise Manager 10g Grid Control Release 4 (10.2.0.4)
for Linux x86
Download the complete files
GridControl_10.2.0.4_LINUX.zip (1,440,487,994 bytes) (cksum - 2874315604)
Thanks
-Prasad

From the README file:
2.1 Install Oracle Enterprise Manager 10g Release 2
Installing 10g Grid Control Release 4 requires any previous releases of Grid Control, that is any 10.2.0.x.0 installation, and upgrade to 10.2.0.4.0 release. If you do not have a previous release, but want to have a 10.2.0.4.0 Grid Control environment, then first install 10.2.0.1.0 Grid Control (10.2.0.2.0 for Windows), and then upgrade it to 10.2.0.4.0.
- Download Oracle Enterprise Manager 10g Release 2 Grid Control from:
http://www.oracle.com/technology/software/products/oem/index.html
Refer the directions provided to download and unzip the product, and install 10.2.0.1.0 (10.2.0.2.0 for Windows).
- Installing Oracle Enterprise Manager 10g Release 2 Grid Control:
The fast and recommended method is to perform a software only installation of 10.2.0.1.0 (10.2.0.2.0 for Windows) and then upgrade it to 10.2.0.4.0
Download for version 10.2.0.1 is on the same site.
Werner

Installing Grid Control Agent and GC repository on UNIX

Hello,
Could You please explain me If I should install Grid Control Agent as separate OS user (different than existing oracle database), or should I place it in ORACLE_HOME of oracle database . I'm not sure how to separate binaries of Agent and Database server.
Moreover same goes to GC repository, should I install it as separate user or in ORACLE_HOME of existing database.
I'm looking for best practise suggestions.
Regards.
p.s.
All Is about the newest versions of the software.

Hello,
Could You please explain me If I should install Grid
Control Agent as separate OS user (different than
existing oracle database), or should I place it in
ORACLE_HOME of oracle database . These are two completely separate things. You o not need to use a new OS user to use a different ORACLE_HOME.
I'm not sure how to separate binaries of Agent and Database server.If you install the whole grid control setup, you put it into a new ORACLE_HOME and the install will give you separate OMS, Agent and database subdirectories.
Make sure the new ORACLE_HOME is from any existing ORACLE_HOME.
Moreover same goes to GC repository, should I install
it as separate user or in ORACLE_HOME of existing
database.Why?
I'm looking for best practise suggestions.Given the special DB initialization parameter requirement, and assuming you do not want to put the repository on a RAC database, I think the best practice is to
1) install Grid Control on it's own machine;
2) install it using the 'complete OMS and Repository' default install
3) add OMS on additional machines as needed for the load.
4) Follow the suggestions in http://download-east.oracle.com/docs/cd/B16240_01/doc/em.102/e10953/toc.htm

PS2013 - When creating a new instance of Project Server hangs in 'Waiting for resources' status

Hi,
I have one instance of Project Server 2013 fully operational and I tried to duplicate the instance to make some tests. As I know the issue of using the same Content Database of Project Server in the same Server Farm, I used the powershell backup/restore/dismount
and mount the content database to change the site IDs to avoid index duplication. The Project server database was a regular SQL backup and restore in another database.
I created a new Web App in the port 90 as show below.
Then I included the Content database of Project Server as separated DB from SharePoint for this new SharePoint -acme90 and I tried to create the new instance. The creation hanged in "Waiting for Resources" status.
To make another check excluding the reuse of the SharePoint-80 I tried to create another instance both in the SharePoint-80 where is the working instance and in the SharePoint-90, everything default and again they all hanged in Waiting for Resource.
If I try to create the instance using PowerShell I got the following error:
PS C:\Users\epm_setup> Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCo
llection http://acme02/epm -Lcid 1046
Mount-SPProjectWebInstance : Cannot find an SPSite object with Id or Url:
http://acme02/epm.
At line:1 char:1
+ Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCollection
http://acme02/ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Offic...ountPwaInstance:
   PSCmdletMountPwaInstance) [Mount-SPProjectWebInstance], SPCmdletPipeBindEx
ception
    + FullyQualifiedErrorId : Microsoft.Office.Project.Server.Cmdlet.PSCmdletM
   ountPwaInstance
All SharePoint and Project Server services are running, all App Pools and sites are started at the IIS. I could not find a hanging timer job.
I cannot stop the hanged process or dismount the instances using Powershell since no instance created.
How should I solve the hanging status of creation of the instance? As they are in Hyper-V I can go back using one snapshot.
Thank you.
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi Eric,
Thank your for your interest in this case.
I checked for running and crashed PWA jobs and deleted all of them just after restoring the snapshot and tried to create the new instance in the new web app in port 90 (besides the existing and working instance in port 80), but again it hanged in "waiting
for resources". There is not any timer job hanging, no error in event viewer or in log. So the error is well before working with cloned dbs.
Answering your questiion, I am working all on 2013. My intention is backup one instance of the port 80 and copy to the instance of port 90, changing of course the url and the index of the content db of SharePoint. The process I used was:
Create a new web app in port 90, creating a new SharePoint_Content_2 on a
http://server:90 site.
Created the top level site called Portal using the Team Site template.
Create a new content db for new instance of Project Server named EPM_Content_2 using Central Admin.
Backup content db from port 80 instance of Project Server and restore to this EPM_content_2 using PowerShell cmd.
Dismounted and mounted this Project Server content db to create new index for existing sites to avoid index conflicts.
Backup the Project Server DB from port 80 using SQL backup and restored as ProjectWebApp2 db for port 90 instance.
Tried to create a new instance of Project Server
http://server:90/pwa on web app of port 90 using the ProjectWebApp2 db and using the same app pool of the other instance. But as in the previous case, it hang out in "Waiting for resources".
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Installing Grid Control - new instance - then db server?

Similar Messages

Maybe you are looking for