Installing HA Fim Service

Hi All
im following this guide to install FIM portal and Service with load balancing
http://www.harbar.net/articles/fimportal.aspx
All went well, after modifying some of the scripts, but now the question is when i install the FIMservice on the second node do i create a new DB or i reuse the existing one ?
Also when installing the password reg and res portals, inorder to make them externally accessible all i need to do is just specify the external names only ?
Thanks in advance
Hany George | Consultant | IDC S.p.A | MCITP: Lync Server | MCITP: Exchange 2010 | MCTS: OCS | Blog: http://dusk1911.wordpress.com/ | If this post has been useful please click the green arrow to the left or click Propose as answer

Thanks for your answer, but i am now struggling to get the portal up in the first place
below is what i am doing
Configured LB for the 2 fim portal/service machines
Deployed SPF 2013 and configure all the special settings and joined the second machine
Install fim service and portal on the 1st node
install fim service on the second node
All of the above goes successful until i try to login i get service unavailable in a forefront page
any ideas if i am doing something wrong ?
Hany George | Consultant | IDC S.p.A | MCITP: Lync Server | MCITP: Exchange 2010 | MCTS: OCS | Blog: http://dusk1911.wordpress.com/ | If this post has been useful please click the green arrow to the left or click Propose as answer

Similar Messages

FIM Service and Portal Installation Ends Prematurely

Hello All,
I'm in the process of setting up a new production FIM 2010 R2 server. I have already installed the FIM synchronization service and I was able to install this successfully.
I have already installed SharePoint services (WSS 3.0) and configured it for FIM. But when I try to install the FIM Service and Portal.
I keep getting and error that says " FIM Service and Portal Installation Ends Prematurely" with no other details. If anybody has any advice please let me know.
I have already installed everything on a stand alone box in a dev environment and it all works correctly however I am unable to now install in a production environment

Cameron is right - you should consider FIMService account nearly as normal AD account for user*
An installer account should be admin on the box, where you are installing FIMService and he should be sysadmin on SQL during installation of FIMService. An installer account should be other than FIMService account itself.
*FIMService account:
Lock down the Service Account
The service account should not be used by any other services or users. The account must not be used to logon interactively and requires no access to any additional resources beyond those granted during setup. The service account is used to provide the security
context for the MIIS service as it accesses resources on the MIIS server and the associated database. It also provides the security context for the execution of any rules extensions.
Lock down the service account to ensure no malicious user is able to sign in using its credentials and gain access to MIIS data. Configure Group Policies to lock down the account and restrict access to this account. Since the MIIS service only needs the account
to run as a service, restrict the account as follows:
Deny logon as a batch job.
Deny logon locally.
Deny logon through Terminal Services.
Deny access to this computer from the network.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
Good topic for a Wiki article:
http://social.technet.microsoft.com/wiki/contents/articles/23330.technet-guru-contributions-for-march.aspx
Thanks Dominic and Jose!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

NLB for Two FIM Service and portal servers in single domain

Hi,
I am currently working in a FIM Project in which i need to install two FIM service and Portal Servers in single Domain.
Customer wants to open the FIM Portal with common URL of both the Servers.
I have only knowledge that we need to do NLB between IIS of both the servers. anyone can provide help that how can we achieve this.
Any help would be really appriciated.
Thanks,

Actually - just configure NLB and make sure that your Sharpoint site collection handles access mapping for this common name. Best would be to create it with this name as a site name from the start.
Same for service - configure all nodes to use same service name and configure NLB.
Here is some blog post which should help on details:
http://blogs.msdn.com/b/agileer/archive/2011/06/28/setting-up-an-nlb-cluster-for-a-fim-portal-web-service.aspx
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

Unable to install FIM service Portal!!!!!!!!!!

Hi Everyone,
While installing Fim Service Portal i am gertting an Error: Service 'Forefront Identity Manager Service' (FIMService) failed to start. Verify that you have sufficient privileges to start system services.
Please find the below Screenshots:
Please Help!!
Thanks~ Giriraj Singh Bhamu

Well... pretty obivious, your user account running the service doesn't have enough rights on the system.
http://technet.microsoft.com/en-us/library/gg637902%28v=ws.10%29.aspx

FIM Service could not be installed

Experts,
I am installing FIM 2010 R2 SP1.
installation order
step1 on server1 - FIM Synchronization server
step2 on server2 - FIM Service
step3 on server3 - FIM Portal
FIM Synchronization service installed successfully.
while installing FIM Service. All things goes smoothly but FIM Service is not visible in services.msc.
What could be reason?
Should I install Portal first?
Thanks,
Mann

You can install FIM Service and FIM Portal at the same time as seen on this guide
Step 8: Install FIM Synchronization Service, FIM Portal, SSPR, and FIM Reporting
What happens if you open your browser in your FIM server and go to
http://YourFIMServer/identitymanagement or
https://YourFIMServer/identitymanagement if you have enabled SSL?
He is not installing FIM Portal at the same box - so /identitymanagement would not work here...
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Error Installing FIMService_x64_KB2870703.msp when FIM Service and FIM Portal (SharePoint) are on two different servers!

I'm trying to install KB2870703 however I have our servers setup this way:
Server A: FIM Service & Sync Service
Server B: SharePoint 2013, Password Reset Portal, Password Registration Portal
When attempting to install FIMService_x64_KB2870703.msp It starts and dies almost instantly
The errors from the log:
Action 12:27:15: CheckSharepointAdminServiceRunning.
Action start 12:27:15: CheckSharepointAdminServiceRunning.
SFXCA: Extracting custom action to temporary directory: C:\Windows\Installer\MSIEE5B.tmp-\
SFXCA: Binding to CLR version v2.0.50727
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.IsSharepointAdminServiceRunning
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' ---> System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value .
   at Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.IsSharepointAdminServiceRunning(Session session)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
   at Microsoft.Deployment.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint, IntPtr remotingDelegatePtr)
CustomAction CheckSharepointAdminServiceRunning returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 12:27:15: CheckSharepointAdminServiceRunning. Return value 3.
Action ended 12:27:15: INSTALL. Return value 3.
Property(S): Data = C:\Program Files\Microsoft Forefront Identity Manager\2010\Service\Data\

On Wed, 26 Mar 2014 00:15:57 +0000, jmanley WI wrote:
I installed it on server B I need to install on server A to update the Database Schema. My understanding is having the portal seperated from the portal is supported. Is that incorrect?
You don't mention the FIM Portal at all in your first post.
Paul Adare - FIM CM MVP
"The day Microsoft makes something that doesn't suck is probably the day
they
start making vacuum cleaners" -- Ernst Jan Plugge

Error message while while upgrading FIM RTM to FIM Service pack 1

Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban Singha

HI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine

Unable to delete FIM Service MA

Experts,
I had three MA.
-File based MA
-fim service ma
- AD MA
Due to some problem now I am trying to start from starting. I deleted all MA but FIM Service MA is not getting deleted.
during import and export 498 records shows error. How to get rid of this 498 connector space object.
Can I ignore this errors. What impact this will have in future. Let this object in connector space.
I see following errors while in eventvwr when I run FIM Service MA.
The server encountered an unexpected error in the synchronization engine:
"BAIL: MMS(12224): d:\bt\800\private\source\miis\server\sqlstore\sproc.cpp(1571): 0x80230405 (The operation failed because the object cannot be found)
Thanks,
Mann
Thanks,
Mann

The easiest way to clean up FIM Service is to export MV schema (if changed) and Management agents, then restore FIM's databases (hope you have them) as they were just after installing FIM.
Then you are sure that you have clean environment.
Other way is to delete connector spaces on all of the agents (so you would not have to re-create the same MA). Considering that there is some data on FIMService - delete it manually or by PS script. Or, if those objects tend to be there and they are ok,
you can do it - it should not cause the problem.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

FIM Metaverse & FIM Service

Dear all,
I am trying to sync user from AD01 to AD02 using FIM. I already installed FIM Sync & FIM service
As far as I understand, I need to have 02 MA to connect to AD01 and AD02 and the flow seems to be like this
AD01=====(MA01)=> CS01==> Metaverse ==>CS02=(MA02)=====>AD02
Now I still have no idea to configure them and appreciate someone can hell me some questions
- There is only one Metaverse on FIM Sync?
- How to push user object from CS01 to Metaverse? Is it projection rules?
- How to push Metaverse to CS02 and export them to AD02. Any pre-conditions to be able to create object on AD02
- Anyone have LAB guide for this scenario please send me the link.
Thanks a lot !

Hello,
you need only 2 AD MAs if there are different forests, each AD MA can handle mutiple Domains within a forest.
Yes there is only one Metaverse, its the combined store off all identity data.
For configuring MA and approp. syncrules see these articles:
https://technet.microsoft.com/en-us/library/ff686263%28v=ws.10%29.aspx
http://social.technet.microsoft.com/wiki/contents/articles/648.how-do-i-synchronize-users-from-active-directory-domain-services-to-fim.aspx
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

FIM Service - Problems with Exchange Mail Listener

I have a lab environment with Exchange 2010 (exchange) and FIM 2010 R2 (fimserver), both running on Windows Server 2008 R2 Std SP1. My problem is that the Exchange Mail Listener in the FIM Web Services is throwing exceptions and unable to poll
or send mail. The exception is always "System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'."
Versions:
FIM Service: 4.1.3419.0
Exchange 2010: 14.01.0218.013
The FIM service is ran under a service account "Domain\fimservice", and has an Exchange 2010 mailbox
[email protected]. The "Microsoft.ResourceManagement.Service.exe.config" is defined as following:
<appSettings>

<add key="mailServer" value="https://exchange.domain.com/ews/exchange.asmx" />
<add key="isExchange" value="1" />
<add key="sendAsAddress" value="[email protected]" />
<add key="synchronizationServerName" value="fimserver.domain.com" />
</appSettings>
On the FIMServer I can run IE under the FIMService account and successfully get to
https://exchange.domain.com/ews/exchange.asmx without any certificate errors or authentication prompts. I can also access OWA and send and recieve mail from the fimservice account.
Turning on additional logging on the web services I see the following messages:
Microsoft.ResourceManagement Verbose: 0 : The Exchange Mail Listener is marking Microsoft Exchange "Read" messages as "Unread".
ThreadId=11
DateTime=2013-12-03T19:45:31.5391601Z
Microsoft.ResourceManagement Verbose: 0 : The mail listener is looking for items that match this search expression: Find Item:
(((((exists(ilmStatus) and (ilmStatus is equal to 'Read'))) and (((((((ItemClass is equal to 'IPM.Note.IdentityManagement.AddToGroups') or (ItemClass is equal to 'IPM.Note.IdentityManagement.RemoveFromGroups'))) or (ItemClass is equal to 'IPM.Note.IdentityManagement.ApprovalResponseApproved'))) or (ItemClass is equal to 'IPM.Note.IdentityManagement.ApprovalResponseRejected')))) and ((not(exists(ilmApprovalEndpoints)) or (
ThreadId=11
DateTime=2013-12-03T19:45:31.5470841Z
Microsoft.ResourceManagement Error: 3 : System.Web.Services: System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.ExchangeServiceBinding.FindItem(FindItemType FindItem1)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.<OnPollTimerExpired>b__0(Boolean findUnreadItems)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.OnPollTimerExpired(Object state)
Here is another instance:
Microsoft.ResourceManagement Verbose: 0 : The Exchange Mail Binding is creating binding elements.
ThreadId=14
DateTime=2013-12-03T19:45:32.7624276Z
Microsoft.ResourceManagement Error: 3 : System.Web.Services: System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.ExchangeServiceBinding.FindItem(FindItemType FindItem1)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.<OnPollTimerExpired>b__0(Boolean findUnreadItems)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.OnPollTimerExpired(Object state)
ThreadId=4
DateTime=2013-12-03T19:45:32.7644086Z
Any suggestions?

David,
Thanks for the suggestion. The account didn't have any e-mails. I eventually found the issue was with the exchange server itself and not related at all to FIM. Even though I could access OWA and the EWS asmx page the product wasn't fully functional due to
a missing DLL from another .NET update. So I thought exchange was working properly, but it wasn't.
After installing this
hotfix (KB2637518) on the exchange box, the product was working and therefore FIM was working as expected.
More details can read on this
technet blog, (at the very bottom labelled UPDATE)

FIM Service database could not be successfully deployed. Error: Timeout Expired

Hello,
I have a simmilar issue as per
http://social.technet.microsoft.com/Forums/en-US/ilm2/thread/b2de9b59-0ce4-4c9b-bfec-95662a4aa373.
The setup is on a LAB environment with AD, SQL 2008 R2, Exchange 2010 and the FIM server is on different servers. FIM Synchronization completed succesfully on the same server and there is no connection problem with SQL.
The FIM Server details:
OS:Windows Server 2008 R2 SP1,
SQL Native Client 2008 R2 is install
SQL Envirinment:
OS:Windows Server 2008 R2 SP1,
SQL 2008 R2
The Installation account of the "FIM Service & Portal" is the FIM Service account and have SYSADMIN rights on SQL,
There is a mailbox for the FIM service account and it can access owa. The EWS certifacte was aso added to "Trusted People - Local Computer". The FIM Service and Portal Setup run and then give the following errors:
The first error screen:
The second error screen:
After the setup has performed a rollback the following error is found in the Application Log:
Product: Forefront Identity Manager Service and Portal
-- Error 1722. There is a problem with this Windows Installer package. A
program run as part of the setup did not finish as expected. Contact your
support personnel or package vendor. Action DeployAndPopulateDatabase,
location: C:\Windows\Installer\MSI40E7.tmp, command: installApp=FIM
action=DeployAndPopulateDatabase databaseName=FIMService
namespaceName="fim" datFilesInstallDir="C:\Program
Files\Microsoft Forefront Identity Manager\2010\Service\Data"
sqlserverName=****sql01.***.***.com FIMServiceAccountDomain=tlab
FIMServiceAccountName=fimsvc SyncServiceAccountDomain=****
SyncServiceAccountName=fimma RunningUserDomain=**** RunningUserName=FIMsvc
RunningUserEmail=
CreateDatabase=True
This is the same as "Yoann-78" posted on, but teh FIM Service account does have a mailbox and it does show in AD.
Regards Andre van der Westhuizen

Hi,
I know this thread is old, but i just ran into this same problem and had been trouble shooting it for a few days. In the end the resolution to installing it on the SQL Cluster was to change the size of the model database. I finally found the link below and
change the value from 102 to 2 and it worked. I will say that in another test environment I was able to install with the value of 102. So in my case there could have been something else going on. Regardless, it finally worked.
http://social.technet.microsoft.com/wiki/contents/articles/18762.troubleshooting-fim-server-database-could-not-be-successfully-deployed.aspx

To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
Thanks

Hi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP

HT1923 I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system servic

I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Error while installing Adobe Document services

Hello,
am getting following error while installing Adobe document services on HP-UX system. The portal version is EP 6.0 SP 11.
AdobeDocService/DVD_NW_04_SR1_NetWeaver_Components/ADOBE/ADOBEGEN/OFFLINE/ADSSAPOFF.sca' does not exist.
Jun 27, 2005 1:59:50 PM Error: Processing error. Return code: 4
i HAVE ALREADY CHECKED AT THE ABOVE LOCATION & THE FILE DOES EXISTS AT THAT LOCATION.
Regards,
Sunil Kulkarni

is this problem resolved ? - this seems related to DB/OS (e.g., if largefiles not enabled then the datafile cannot grow beyond 2GB and file resets)
or something like that which SAPinst is not equipped to handle and does not give a better error message
the system.log in the sapinst_instdir may have some clues
Birdie

Installing HA Fim Service

Similar Messages

Maybe you are looking for