Installing hp 1410 all in one

My All in one HP 1410 is plugged in and usb connected but after msg. PRINTER FOUND, my pc doesn't seem to be able to get it connected.
I am referring to installation on my window ex pea (sorry, am now on android)
Balet911

Hello @balet911 , I hope you are well!
I have a suggestion for you to try that should help you install your PSC 1410 on your Windows XP system.
Click this link and try these steps: Windows XP: The Progress Bar on the Software Installation Stops or Stalls
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)

Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)

HP 1410 All in One Door Open Error

A friend gave me his HP 1410 All in One printer a while back, so I installed all the drivers to my Windows 7 Home Premiuim Sony Laptop. The Scanner works just fine, but when I attempt to print a document, files pile up in the queue with an error to the side, Door Open. I've closed the door, but still get this error. When I open it, the ink container centers, and when I close it, it goes back to one side of the printer, but the error remains. I've restarted the printer but the error remains. Is it a broken part, or is there a way to bypass the door check?

your door interlock is not makeing contac.chack the front door to see if it is lineing up whit the covers or see ifyou brook aneything inside the front cover whear you added toner.the interlock is in the front door of the michane also you can make sure all of the other doors is closed
tecnical support for hp printing

HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document

Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopard OS X 10.6
Just yesterday, my printer was jammed with a "Remote Downlevel Document" which I can't remove after using these methods I've researched:
1. "Right Click and Cancel" x [indefinite] times
2. "Right Click and Refresh" x [indefinite] times
3. "Restart" x [indefinite] times
4. "Restart" with printer hooked on/off to the USB x [indefinite] times + [indefinite] combinations of whichever comes first
5. "Unhook USB and Click Start>Run "net stop spooler" and Rehook USB and Click Start>Run "net start spooler" x [indefinite] times
6. Did virus scan for suspicious virus using Anti Vir
7. And in between, combinations of the above x [indefinite] times
8. Search on the internet which obviously there's no real solution
Please help.
Regards,
Bobby

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

HP PSC 1410 All In One, have driver problems...............................

I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer is detcted but when I open "MY COMPUTER" and click Devices, it shows the printer listed as operational and that it is functioning properly.

I tried installing the driver and couldn't so I called HP and found out the printer is obsolete and no drivers are available........ they don't support that model anymore , So I'm screwed................

HP Psc 1410 all in one series Printing pink

Printer - HP Psc 1410 all in one series
Operating system - Microsoft windows Vista 32 bit
Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
Jamie

Please click here for a possible solution to your problem:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
Let me know if that helps.
Please click on KUDOS if you find my solution helpful.

HP PSC 1410 All-In-One no longer prints

I have an HP 1410 all in one. I also recently updated to Mac OS X 10.5 Leopard. My printer no longer prints. It will show up in the print queue and the status will say printing but nothing will happen. After a few seconds it claims the printer is ready to print and stops any jobs in the queue. I have tried resetting the printer, tested all the connections, power cycled it both with the power switch and power cable, restarted my computer multiple times, I've tried updating the drivers (but I'll try again here in a minute), and I'm out of ideas. Any suggestions?

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

HP 1410 all-in-one Scanned Pictures not Saved

Recently upgraded my pc to windows 8.1 but the HP 1410 all-in-one printer scanner will not save scanned pictures. I attempt to "scan to file" but when I click finish I receive the option to scan more pictures or end (done). W"done" when I click done the "solution center" app returns to its home screen.
All other scanning properties are functioning correctly.

Hello there! Welcome to the forums @Dadoo1211
Please first try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please let me know the outcome!
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work

While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally Confuzed

Re: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality.

Printing 4x6 pics using the hp 1410 all in one printer

Printer hp 1410 all in one
OS Windows 2003
Computer Dell
Pictures downloaded from the internet and saved into "my pictures"
I am currently trying to print using 4X6 glossy advanced HP photo paper. I go to print I select paper size 4x6 with tab. On paper quality I select "other photo paper" as advanced photo paper is not an option(which I was directed to do so on the box of photo paper). I changed the width guide and put photo paper with tabs facing me and hp symbol up. The paper goes in half way and then the "check paper' light comes on. The picture paper jams and there is no ink on the paper. I have referenced the user guide and I am following all instructions to a tee but to no avail. Any tips would be greatly appreciated.

Printer hp Photosmart C3180 all in one
OS Windows XP Pro
Computer Dell Optiplex 745
Photo is JPEG on my computer
I'm having a similar problem with hp c3180 all in one printer, trying to print on 4X6 photo paper. I assumed it was because the back rollers were needing cleaned since that's always where the photo paper gets stuck (can't make the bend), so I did as I'd found in instructions elsewhere and cleaned those rollers with distilled water on clean, lint-free cloth. Didn't help, still jams there in the back every time. Printer thinks it's working OK sometimes, goes ahead and "prints" without getting any of the ink onto the photo paper since it's stuck there in the back and doesn't advance past that point. Very frustrating, can't get even one photo to print.

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Trying to install an HP All-in-One

Morning all...
Well, I'm a recent converted Windows user and I'm about to pull what's left of my hair out. I purchased a used PowerBook G4 a month ago and everything w/ printing has been great until this last weekend. I purchased a new HP Photosmart C6150 All-in-One in December 06, mainly for the wireless capabilities. When I bought the G4, it connected right away w/ Rendezvous (didn't even know what that was at the time, still don't really know) and everything was working perfectly. THEN I moved this weekend, re-setup my wireless and now the printer won't print, the G4 recognizes the printer via Rendezvous, but won't connect stating 'Driver not installed'. I HAVE managed to work around it after uninstalling and reinstalling the drivers several times to get the system to view the printer in generic form (don't ask me how I did it but I did) but try to print and it won't connect. I went into the printer and re-established an IP address and was able to find it through IP w/ the HP setup, but that won't print either. Bluetooth doesn't work either. I even hooked it up via USB (which works) just to see if I was losing my mind...
Any suggestions? Do you need more info? I'm at my wits end at this point... Hooking up the printer via USB defeats the purpose, if you know what I mean...
Thank you in advance...
m
PowerBook G4 Mac OS X (10.3.9)

I had a similar problem a few months ago. I also have the PowerBook G4. I was trying to install the HP Photosmart C7180.
My printer was new, so I called HP Tech Support. (HP has really great tech support for Mac users.) It seems that they had quite a number of wrong installation cd's shipped with their printers for the Mac. The cd's are labeled correctly, but they are not actually the correct cd's as labeled.
One way to tell, is during the installation. If I remember correctly, there is a prompt which asks which printer you have from a drop down menu. As I recall, my model was "Exactly" on the menu. But, I chose one from the menu which I thought was close enough. This was one indication to HP tech support that it was the wrong installation cd.
In any case, you can go to HP's website and download the the latest, correct installation.
I would try that.

Problem installing Photosmart C6180 All-In-One software

I've "googled" and found several similar installation issues but none quite match mine. When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified." The file that it is attempting to find is found in the Dialog window heading:
c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
Using %temp% I am able to verify that the 7zS52C3 folder structure exists. However the ",sourcepath.setup" folder shown above is incorrect. it should be just "setup".
I've ran this install several times under different accounts, including creating a new admin account.
I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue. I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
I am running Windows Professional x64, My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer. I need the software primarily for "scanning to computer" functionality.
Any help is appreciated.

Hello @DirkPittP,
Welcome to the HP Support Forums!
I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
Step 1: Uninstall Drivers:
First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
Step 2: Clear the Temp Files:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
Once the Temp folder is emptied, close the window
Right click on your Recycling Bin and select Empty Recycling Bin
Step 3: Download Drivers:
Please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Allow the download to Run
Once the download has completed the installer will automatically extract
After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . . number sequence it refers to this time around.
Step 4: Rename Temp 7z Installer package:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder locate the 7z . . . folder that shows in there
Right click on the 7z folder and left click on 'rename'
Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
NOTE: Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any 'sourcepath.setup' folders at all.
Step 5: Install Printer:
Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
Scroll down to the bottom of the installer files
Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
An installer window should pop open
Follow through the with the onscreen instructions to reinstall your printer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Tearing my hair out trying to install a HP all in one printer

Hi there I have a HP all in one Deskjet f2280 and I keep getting an error
"an error occurred while trying to add the selected printer, error -50"
I can't add a printer and I've installed and reinstalled the software???
I contacted Hewlett Packard and they've said it was an apple problem, does anyone know what I can do?
thanks

Welcome To  Discussions Jellybean100!
If you installed the driver/software, from a CD, uninstall it, then download & install from here HP Deskjet F2280 All-in-One Printer, instead.
There are tips & FAQ at that site as well.
ali b

Re: how do i install a hp psc 1410 all in one printer without the disk?

how to install?

lection wrote:
how to install?
Install what? If it is the PSC 1410 then what operating system? Do you have a 32 bit or 64 bit version? See my post here.
If a different printer model please start a new thread after reading this post and then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installing hp 1410 all in one

Similar Messages

Maybe you are looking for