Installing HP DESKJET 2050 ALL-IN-ONE On windows 8

I want to install my HP 2050 J510 series on my laptop with windows 8, but it's rejected (not supported). I had previously had windows 7 and the printer had installed okay. How do I upgrade to be able to install the 2050 on windows 8?
Davekam

How do in install my hp deskjet 2050a series all in one printer on my windows 8 because it is showing me the error log of im compatibility.

Similar Messages

Error installing new 4630 e all in one to windows xp workstation with usb

error installing new 4630 e all in one to windows xp workstation with usb
cannot install this hardware error occured during this installation of the device the specified module could not be found
local printer trying to connect with usb. just purchased the printers.
Tried:
loading hp dectect to detect printer, can not detect it
loaded diagnostic says nothing is wrong
loaded drivers form hp website
if i go into device manager the comptuers does see the printer there, with a ! next to it saying drivers are not loaded, but cant get the drivers to load.
as the instructions say in the book received with the printer. to troubleshoot do this... which I did, uninstalled rebooted, removed cd and unplug usb, loaded software then pluged in usb and still get same error, cannot install this hardware error occured during this installation of the device the specified module could not be found..
someone help please

I also just bought a 4630 and have the same problem (Windows XP) BUT after finally figuring out how to enter numbers on the key pad I was able to get the device to recognize and accept my wireless connection HOWEVER when attempting to print the software claims it could not communicate with the printer BUT the printer worked just fine and I was able to get at least 8 pages of high quality text.
So, it looks as though HP is SNAFU, the left hand does not know what the right hand is doing.
I'll keep playing with the software to see if I can clean up this mess.

HP Deskjet F4185 All-in-One in windows 8 (64 bit)

Sir,
I could not down load the driver software of HP Deskjet F4185 All-in-One in windows 8 (64 bit). What can I do sir ?

Why couldn't you download the driver? The download page is here if you couldn't find it.

Printer start-up problem. HP Deskjet 2050 All-in-One J510 series. Part# CH350A

Whenever I first turn on printer it immediately prints a page and says I need to scan the page and realign it. Also, the colors are somewhat faded looking.
This question was solved.
View Solution.

Hey RedDave,
If the unit is printing an alignment page on each start up, then the unit is failing to align. If the unit fails to align, then it will attempt to do so on the next start up. Do you get an alignment failed message on the computer screen?
I would advise following the steps in the document linked below to troubleshoot this condition in your Deskjet 2050 J510 series All-in-One.
'Alignment Failed' Error Message Displays on the Computer
Let me know how it goes,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Driver HP Deskjet F2200 All-in-One for Windows 98

Hello!
I have printer HP Deskjet F2200 All-in-On and I need driver for Windows 98. Where I can find this driver? If is not it present, is it possible to do something?
Thank you

Hi,
lick Start ( ), and then click Control Panel .
Double-click Add/Remove Programs . In the list of installed programs, click your HP printer, and then click Add/Remove .
Follow the on-screen instructions to complete the software and select the printer Deskjet 990C and complete the installation. Since we don't have Wind 98 software for the printer any more
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

I have a hp deskjet 2050 all-in-one j510 series printer wired it and ran cd still not printing what

i have rechecked wires not sure what i did printer will not print please help

Hi, Yesterday I bought the above printer and installed it on my Windows XP but when I click for the printer to print there is an error messsage that comed up bizsupport2.austinhp.. I have no idea what this means all I know is my printer is not printing
Can someone please give me any help
Thanks

HP Deskjet 2050 All in One J510 Series

Had to install my printer again onto W7 (x64).
The installation disk is a few years old now and whilst it still works,
when l get the menu up, all it shows is "see what's printing", "set preferences",
and "customize your printer".
There is no mention of checking ink levels or to even do a scan.
I know sometime ago l had to rebuild the system and someone posted a link to install
an updated version of the menu.
Any ideas?
Regards
This question was solved.
View Solution.

Hey,
you may have to uninstall and reinstall the printer software and then add the printer.
I recomend you to use the latest full feature which is available online Click Here
Then follow the document below to set up the printer
USB Setup > Follow method Two.
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

Trying to install HP Deskjet 2050 to Mac (OS Mavericks) to Print but not printing.

Hi,
I followed the instructions on the page about installng my printer (HP Deskjet 2050 J510 series) and when I try to print, nothing shows up in the queue.
When I had previously tried installing using the CD, I got the error message that the printer is not supported by this new operating system (mavericks.)
Can someone please help?
Thanks.
DMKL
This question was solved.
View Solution.

Hi DMKL,
Please visit the www.hp.com and search for HP Deskjet 2050 All-in-One Printer - J510a and select drivers and you can select the Mac OS X 10.9.5. and select next ... below you will get the Driver product installation software link please click on the + sign on the left side and there would be a download option. please uninstall and reinstall the software from the web and it should resolve the issue.
Regards
Aneesh
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
I have upgraded the XP OS to SP3 with numerous updates;
Checked that the USB ports read Data sticks OK;
run a/v and malware programs, including Microsoft Safety Scanner;
checked that USB drivers are up to date;
uninstalled driver software and re-installed with software downloaded from HP;
carried out the procedures detailed in HP Support Forum 4022116
Error message the same.
This is for my elderly neighbour - help please!
This question was solved.
View Solution.

Hi @bodger50,
Welcome to the HP Forums!
I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
Hope this is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Scanner not working hp deskjet 1510 all in one

Hi.. i have hp deskjet 1510 all in one printer, at first all are working so well. but after 3 days scanner is not working. Everytime i try to scan "hp series not found" will appear. I also tried the print and scan doctor but it shows Hp twain scan error. I dont know whats the problem. i tried to uninstall and install it again using the installation cd and so with the the software and driver provided by hp but still not working. Pls help me to fix this one. Thank you...

Hi jkshipra22,
Thank you for your reply! For further assistance I will need to know:
If the printer is able to make copies by itself. Copy Text or Mixed Documents.
If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try our HP Print and Scan Doctor, and let me know what happens.
Hope to hear from you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer. Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
thanks,
Natali

Hello NatDeskjet2540,
Welcome to the HP Support Forums!
Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
Hope this help, let me know.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Deskjet 3050A All-in-one printer J611 series - mavericks and wireless set up

Hi
I have a HP Deskjet 3040A All-in-one printer J611, I have had this printer for about 2years and everything worked perfect then I bought an Apple still all was alright but when I updated my software I got Mavericks and ever since then everything went wrong....I have updated my computer and have AirPrint now and also HP ePrint(currently). How ever the printer was not working or connecting.
Problem 1:
When I tried to fix the problem I uninstalled all HP drivers to reinstall - found that you have to install the apple app Done!(Airprint)
The printer was picked up by the computer and I can scan but I can not print, I'm using the USB cable, and when I print the computer shows it is printing and the printers lights come on but nothing happens(no messages display on the printer) then the computer shows the print is done - but the printer didn't print. Scan is working fine.
Problem 2:
Because of constant problems with the wireless connection I wanted to reconnect it to the router - Restore default.
But now because I don't have the HP drivers, I have no idea how to connect it and I tried both connection ways WPS is not working when I press it on the route...nothing happens and the PIN, where are you suppose to enter the pin, nothing comes up on my computer (USB connected)
I have read the installation pages over and over but can't figure out what is wrong, any advice would be appreciated.
This question was solved.
View Solution.

Hi Lilly4,
I can certainly help you get the printer on the network and working again.
Follow the steps in this thread to put the printer on the network without using the software or the WPS button. I believe we have success doing it this way.
If you continue to experience an issue after the printer is on the network, please let me know. Thanks.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP DeskJet 3055A All-In-One Jobs Series margin

Hi,
I recently reinstalled Windows 7 on my laptop and ever since the top margin is too big and bottom margin too small.
I haven't found a setting to correct this.
The drivers are installed from the HP site and are the drivers for the HP DeskJet 3050A All-In-One J611 Series as suggested by the HP site. I ran all the HP Print and Scan doctor and the HP Hardware Diagnose Progranm 4.1.
Does anyone know who I can fix this problem coz this is very annoying:
Everything I print a art of the bottom falls of th page and isn't printed?
Thanks,
Bas

Hi @basf ,
I understand that you are having issues with the top and bottom margins not printing properly. I will do my best to assist you with this issue.
What application are you using?
Check the page setup in the application you are printing from?
Try another application to see if you have the same results.
Here is a document for checking the paper size and paper type settings from the print driver.
Changing Print Settings in Windows 8.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP DESKJET 3050A ALL-IN-ONE J611 series

My friends.
My problem is very simple.
I have a printer "HP DESKJET 3050A ALL-IN-ONE J611 series" and she can not work properly on my laptop.
I have windowns 8.1 as soy experienced all your drivers and the printer can not work well.
Sometimes I can install it but the next day the computer can no longer print anything.
And so before bedtime to trash this printer and choose another brand'm here to request v.ajuda.
I would appreciate someone answer me for email
[Personal Information Removed]
greetings
jose melo

Hi @josedemelo , and welcome to the HP Forums!
I understand you're experiencing print issues. I would like to help.
Are you able to make a copy without issue?
Are you connected via a USB cable or a wireless connection?
I would recommend performing a power reset on your printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Installing HP DESKJET 2050 ALL-IN-ONE On windows 8

Similar Messages

Maybe you are looking for