Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box. I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
www1.hp.com/...Universal Print Driver for Windows PCL5/
Hope this helps speed you on your way!

Thanks for sharing your tip RatioCynic! That's what this forum is all about!
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

Trouble installing latest Intel Display Driver for Windows 7

Anyone else experiencing issues trying to install the latest Intel Display Driver for Windows 7, version 8.15.10.2057, dated 2 Mar 2010?
This is the second updated driver release that refuses to install due the following error while running setup.exe: This computer does not meet the minimum requirements for installing the software.
I've verified compatibility and have disabled Switchable graphics and selected Integrated Graphics in the BIOS
System: T400, 2764-CTO running Windows 7 (64-bit)
Thanks...
T400 2764CTO
Windows 7 x64

bwpotter,
Appears you selected the right .inf file for Win7/64. Notwithstanding the error flags, are you sure the driver did not install?
For WinXP/32, the equivalent file name is kit22686.inf. In the case of WinXP (likely similar for Vista and Win7), Lenovo's file-set will unpack to C:\drivers\WIN\DISPLAY2. The .inf file that appears in the Device Manager install-routine lives one level down, in C:\drivers\WIN\DISPLAY2\Graphics. Only one .inf file resides in this directory.
When forcing installation of the driver under WinXP, error messages appear that are similar (but not necessarily identical) to those you encountered. Still, after a sequence of five or six such error messages, the driver does load and can be verified after a reboot. (The new driver has performed to spec for the past several days--no issues whatsoever.)
The final splash screen in the series reports "Completing the Hardware Update Wizard." (This message does not, however, necessarily denote a successful installation.)
In the case of WinXP, the errors appear to be generated by the installer, igxpun.exe (v1.2.30.0). Note that the flaky display driver installation should generate an error log. Search for an error log file using the string "*appcompat.txt" (no quotes) and see what it says.
In the end, the problems with this package can be attributed to simple sloppiness (vendors commonly forget to eat their dog food) and should be quickly fixed if the community barks loudly.
Hope this helps.
--BAM

HP laser 4000n Driver for Windows 8 32bit

I am looking for driver for hp 4000n that work with windows 8.
This question was solved.
View Solution.

The recommended driver for the laserjet 4000n is the Universal Print Driver or the windows update driver. Please see the below documents for more information.
Laserjet Products supported in windows 8
UPD
Install drivers included in windows 8 or windows update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Reg. hp laser 1010 driver for windows 7 64 bit

i required HP laserjet driver software for windows 7 64 bit. i unable to get in net. kindly help me to resolve the issue

Hello VGSHEKAR,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

AMD Radeon 6770m and Intel HD 3000 Driver for Windows 8.1 Pro 64 Bit

Hi, I use
Laptop : HP Pavilion DV 6 - 6019 TX.
OS : Windows 8.1 Pro 64 Bit.
VGA : - AMD Radeon 6770m
- Intel HD 3000
Now, the graphic was error, each after booting, the windows logo appears then to black screen (can't get the desktop).
In device manager - display adapters, only AMD problem (Microsoft Basic Display Adapter), then I uninstall the driver to be able to install AMD drivers.
I tried with "14-4-mobility-win7-Win8-win8.1-64-dd-ccc-WHQL", it is said that the last AMD drivers, but when at the end of install, it said failed to complete.
i also update driver Intel HD 3000 from this " https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 "
File name: win64_152822.exe
Version: 15.28.22.64.3517 (Latest)
Date: 04/10/2014
Size: 138.68 MB
OS: Windows 7 (64-bit), Win 8 (64-bit), Win 8.1 (64-bit)
anyone please help me? i already try 5 days to try some driver but still black screen because AMD driver can't install. if you know the driver, please write the link. thanks a lot

1. In bios, do you found fixed and dynamic? if you don't found, install bios mod. Use dynamic
2. Uninstall all programs and drivers previously, before of "Advanced Micro Devices, Inc. - Graphic Adapter WDDM1.3 - AMD Radeon HD 6700M Series" Release July 2014. You can use http://www.wagnardmobile.com/DDU, for example.
3. Do you install windows 8.1 on windows 8.0? do you use windows 8.1 fresh installation? Can you testing install a new copy of windows 8.0 fresh? install drivers and later install updates... or fresh install windows 8.1?
4. You testing install Windows 7 with http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe and update to windows 8?
5. You testing install http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe in windows 8 initially?
NOTE: Excuse me my bad english, I try to help you. You should install drivers in order: Intel Chipset Device Software, Intel Rapid Storage Technology, Intel Management Engine Interface (6-series / 7-series / 8-series / 9-series) and then AMD software: http://forum.notebookreview.com/hp-drivers-software-forum/556469-drivers-hp-dv6-4xxx-dv6-6xxx-dv7-5x...
NOTE 2: My computer support Windows 8.1 native, but your computer not... http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5077... will be no new official drivers for these devices
NOTE 3. Test leshcat or guru3d drivers, and review forum respectively

How to install hp laser jet 1018 on windows 7 x64

ok thanks
how to instal hp laserjet on computer windows 7 (64-bit)?

Have you already installed the driver/software and its not working or is this the first time you are installing?
For the first time installing...
1. Close any software programs running on your computer.
2. Click on the Download button ( LJ1018_1020_1022_Full_Solution.exe ) and save the file to your hard disk.
3. Double click on the downloaded file. This will extract all the driver files into a directory on your hard drive. The default directory these files are extracted to will have a similar name to the printer model.
4. Follow the on-screen instructions to proceed installation.
I usually have the printer disconnected from the computer and connect the usb cord when prompted by the installer.
Is this what you are looking for?
Let me know how it turns out.

How and where do I download and install a DVD R Drive for Windows 7 dual boot?

I was prompted to have a DVD R Drive in order to burn the ISO of Windows 8 Consumer Release Preview on my Windows 7 running operationg system on my MacBook Pro. I just realized that I do not have the driver when I checked "My Computer". Hence, I could not burn the ISO file onto my blank DVD.

you can if you have 30-40GB free space use the setup program to install 8 and archive 7, that leaves 7 there in place.

Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)

my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver? and i can not found the xp driver in hp web, help me.

This might help>>>
http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

To install hp laser jet p1005 on windows 7

there is operating system when installing the software

Have you already installed the driver/software and its not working or is this the first time you are installing?
For the first time installing...
1. Close any software programs running on your computer.
2. Click on the Download button ( LJ1018_1020_1022_Full_Solution.exe ) and save the file to your hard disk.
3. Double click on the downloaded file. This will extract all the driver files into a directory on your hard drive. The default directory these files are extracted to will have a similar name to the printer model.
4. Follow the on-screen instructions to proceed installation.
I usually have the printer disconnected from the computer and connect the usb cord when prompted by the installer.
Is this what you are looking for?
Let me know how it turns out.

Is there an ILX LDC-3916 Laser Diode driver for windows NT using Labview 5.0?

Or will it be necessary to upgrade to the 6 version? I have searched for a while now but this is the only verion that I could find. Also is there any where to learn how to communicate using a GPIB board?

Here are the drivers. They may work with LabVIEW 5.0, but may be compiled in LV 5.1.
LDC-3908 8-Channel Laser Diode Controller Mainframe 39XX.LLB
LDC-3916 16-Channel Laser Diode Controller Mainframe 39XX.LLB
LDC-3916371 Controller Module 391637X.LLB
LDC-3916372 Controller Module 391637X.LLB
LDC-3916374 Controller Module 391637X.LLB
LDC-3916376 Controller Module 391637X.LLB
LDC-3916332 Dual Current Source Modules 391633X.LLB
LDC-3916334 Dual Current Source Modules 391633X.LLB
LDC-3916550 Dual Temperature (TEC) Control Module 391655X.LLB
LDC-3916338 3 Amp Current Source 3916338.LLB
-Jim
Attachments:
ilx39xx.zip ‏1501 KB

Unable to install iTunes 8.1.1 for windows vista home premium 32 bit

When program is installing from version 7.3, a message comes up stating I have a newer version of QuickTime which is impossible. Having purchased a new iPod Nano I cannot use it because iTunes 8.1.1 has not worked out bugs, or so it seems, to download it successfully. If anyone has had this happen and figured out what the problem is, I would love to read your answer.
Message was edited by: [email protected]

Hi,
Yes, I have followed the troubleshooting tips in the following article http://support.apple.com/kb/HT1926.
I still had the issue after removing the application and cleaning up the installer files on my computer.
Two weeks ago I spoke with Apple technical support. We were unable to come to any conclusion as to any reason why the computer states there is a newer version of QuickTime.
Quite frustrating having purchased an iPod Nano.

CORRECT DRIVER FOR WINDOWS 7 AND HP COLOR LASER JET 4600dn

I'm having a problem with our IT department. My old 4600dn worked great until they started downloading new drivers for Windows 7, which they installed just recently. Now the one he INSISTS I use has only one tray selection.... Auto. I'm trying to print business cards..(absolutely no problem till now).... but he INSISTS that this is the only driver. Then he wants me to choose Pg.....select 1, then MANUAL DUPLEX. That's almost impossible for the printer. I'm almost POSITIVE you have a print driver that will allow me the tray selections I had before he installed Windows 7 and this particular driver. I always used "Tray 1," CURRENT PAGE, it zoomed through the perforated cardstock like a streak!!!! Now, the poor printer is trying to run perforated cardstock through the duplexing unit. Out of 10 pages of cards, I ended up with 1 front printed and 9 pieces of cardstock that stuck in the tray and jammed in the duplexing unit. Is there a CORRECT print driver for this particular printer that will allow all my normal functions to be visible and viable? I don't have the model, nor serial #, as it is work printer and I'm at home now, so I can't get on chat. He is hard to get along with and has been playing games this whole time. I found one driver he inadvertantly left a day and a half ago and printed the cards like lightening, as it used to....7 minutes and I had 200 cards for two different staff members. PLEASE HELP! I think he's leading me down a merry path. It also has to be able to duplex fairly heavy graphic pages...and even the driver he accidently left as an option, won't print the graphics. I just KNOW you have a driver with all the options that will allow it to print to Windows 7 Operating System with all the former options. HELLLLLLLP!
Thanks sooooo much!
Kathi T.
[text removed for privacy]

Any suggestions re correct driver for windows 7 and HP 4600dn?

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Tecra 8200: I can't install Wlan driver for Windows XP

Hello ,
i can't find wireless driver for windows xp. I have Tecra 8200. I try to install a lot of drivers of the official page of Toshiba for Tecra 8200 but the drivers do not work.
If anyone know how i can install wireless in my tecra 8200, please let me know.

Hi
Firstly what I want say is the Tecra 8200 was not delivered with Windows XP and you will not find any Wlan drivers for WinXP on the Toshiba website.
I have checked it and there are only drivers for W2k, NT, and W98SE.
But as far as I know the unit was delivered with the ORiNOCO specification Wlan miniPCI Card Wireless LAN standard: 802.11b
In this case I would recommend searching in the net for such drivers.
Unfortunately, this is all what I can suggest.

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

Similar Messages

Maybe you are looking for