Installing Hp laserjet 3050 for windows 7 32 bit

Hi,
i have followed all the instructions given here
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
but I have a problem installing the way you described. when the installation propmts for attaching the printer, the process stops at 4/5. Then a X sing appears and the Win 7 PC cannot communicate to finish device configuration.
If I click next. the the software finishes installation but after restart, an error massage appears that the software should be reinstalled.
PLease help,
thank you,
Preview

Hello @Preview,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue. Good luck.
I worked on behalf of HP.

Similar Messages

Driver HP LaserJet 5 for Windows 7 64 bits operating system

Hi, I am searching for a driver HP LaserJet 5 for Windows 7 64 bits operating system or a work around

Hi,
A driver for your product should be included within the Windows 7 OS or alternatively available from the Windows Update servers.
Please follow the document below in order to configure your printer:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where can I download HP ToolboxFX for my Laserjet 1536dnfMFP for Windows 7 64-bit?

Where can I download HP ToolboxFX for my Laserjet 1536dnfMFP for Windows 7 64-bit?

The provided document reffer to an earlier HP ToolboxFX software.
As long as a Full Feature Software available, the HP Toolbox is included, as you may find by the following installation printscreen, taken from a Windows7 64bit Full Feature installation:
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scanning problem with HP Laserjet 3050 and Windows 7 64-bit

I understand that to use the HP 3050 with Windows 7 64-bit I must use the Windows Fax and Scan software. However, if I try to scan using anything greater than a 200 dpi resolution, the document takes forever! Any workarounds?
Also, was doesn't pdf show up as a document type choice?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Drivers for hp laserjet 1200 for windows 7 64 bit

Nothing seems to work to get printer working.

Hey @Jskol ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand you are having some issue making your HP Laserjet 1200 on windows 7 64 bit work.
Can you please elaborate on what it is that you are experiencing so that I am able to assist you properly? Is it new and not connecting right? Has it lost communication and is now not working? How is it connected to the computer?
Have a great day and a wonderful new year. Get back to me.
I worked for HP.

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Can anyone tell me if there is a new printer software/driver for Laserjet 1300 for Windows 7 64-bit?

I recently replaced my 2 Windows XP Media Center computers. I have a new Desktop with Windows 7 Ultimate and a Laptop that has Windows 7 Professional. I have an HP Laserjet 1300 printer that I would like to connect with my desktop. This printer still works. Keeping it would save me money. Can anyone give me the link to the Laserjet 1300 software/driver for Windows 7 64-bit?
Thanks in advance!

Hi donhkraft,
I am not sure what would cause the issue you are seeing, but you can try to download the driver from HERE instead.
Let me know if you need any other assistance.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Not able to scan directly in pdf with laserjet 3050 in windows 8 64 bit.

hi friends ,
we are able to print with hp lj 3050 in widows 8 64 bit after installing the universal print driver but scanning directly to pdf format as we were able to in early vrsions of windows is still looking impossible. any solution to it?
sachink

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printing and Digital Imaging.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Drivers/Help for HP LaserJet 1022 for Windows 7 (64 bit)

I have a LaserJet 1022 which doesn't work with recently upgraded Windows 7 (64 bit). I downloaded the drivers from the site, but the printer properties in Windows says that it doesn't need drivers, yet it doesn't appear in my list of printers when I go to the print dialog. When I run the plug & Play basic driver wizard, it stalls at the point where it asks user to connect the device. Despite the device being connected (and displaying in Printers and Devices) the wizard just hangs at this point, and I have to cancel setup. Please help, I have to have a printer, and the reason why I chose this Laserjet is specifically because it is easy to install.

Dionee,
I dont think replacing it is in order quite yet See if the document helps provide a resolution and if not post back with any new details and we can move onto the next step from there.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

Driver for HP Color LaserJet CP2025 for Windows 7 64 bit

I just purchased an HP Color LaserJet CP2025 for my computer running Windows 7, 64 bit as an OS. The driver disk does not include that OS and the Driver Support page does not specify which driver to use in order to take full advantage of the automatic two sided color printing capability. Any help out there?

I am having the same problem! Please share if you find an answer.

Unable to update bootcamp and install/find right driver for windows 7 64 bit

I am trying to install windows 7 Enterpris 64 bit on MBA with i7, agter I downloaded the bootcamp windows driver while MBA was running Lion on a flash drive. after installing windows 7 tried to install bootcamp via flashdrive get error "not intended for the hardware" I tried to all boot cam version 3.1/3.2/3.3, tried the bootcamp with driver downloaded via Mac Book Pro which seems Ver 4.0 still no sucess. tried to install the driver missing PCI simple communication, some time trackpad freezes, and have to reinstall all over again, and some time unable to pass login screen as CTRL+ALT+DEL won't work, have to use onscreen keyboard to login. please help? thanks

ashfromwpg wrote:
I am trying to install windows 7 Enterpris 64 bit on MBA with i7, agter I downloaded the bootcamp windows driver while MBA was running Lion on a flash drive. after installing windows 7 tried to install bootcamp via flashdrive get error "not intended for the hardware" I tried to all boot cam version 3.1/3.2/3.3, tried the bootcamp with driver downloaded via Mac Book Pro which seems Ver 4.0 still no sucess. tried to install the driver missing PCI simple communication, some time trackpad freezes, and have to reinstall all over again, and some time unable to pass login screen as CTRL+ALT+DEL won't work, have to use onscreen keyboard to login. please help? thanks
You need 3.0 installed, 3.1 etc are updates, and they need something to update.
How do you plan on dealing with Firmware Updates without an OSX partition?

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

What to re-install from Lenovo on a Windows 7 64-bit system

Hi,
As we already have volume licences for Windows 7 Enterprise 64 bit systems, I made a clean install on my new ThinkPad X201, Type: 3323, Model: 8TG. Now, apart from the rescue image in the special partition that was there when the computer arrived, I would like to have all other "Lenovo features" that were pre-installed with the factory installation that came with the computer.
I have downloaded and installet the ThinkVantage toolbox and ThinkVantage System Update. It seems that Access Connections also is installed and the Power Manager.
However I have also downloaded and installed the Fingerprint Software for Windows 7, 64-bit, but I am not sure where to find it!!!
What else would you recommend that I download and install to make it work like the pre-installed x201 version from Lenovo?
Also I would like to know if I should use Windows 7's system image builder or Lenovo's own version?
And what about the migration tool from Lenovo? Is it better in anyway than Easy File Transfer that came with Windows 7??
Thanks!
Regards,
Dag Wolters

Go to support.microsoft.com/fixit
In section 2 click on: Install or upgrade software or hardware
Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
This link may get you there: http://support.microsoft.com/mats/Program_Install_and_Uninstall/
Let it run and then try to download it again

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Installing Hp laserjet 3050 for windows 7 32 bit

Similar Messages

Maybe you are looking for