Installing HP Solution Center for HP Photosmart C6380 in Windows 7

Installing HP Solution Center for HP Photosmart C6380 in Windows 7
After this scanner/printer has loaded down the Driver - Product Installation Service the next step of downloading software is interrupted by the notice/instruction "The system cannot find the file specified" identified as 
C:\Users\Owner\Appdata\Local\Temp\7zS2780\Setup\.\Setup\blocksysuserins...
Then the  Driver - Product Installation Service is once again downloaded and when that issue is successfully completed, then, once again, the next download is interrupted by 
the notice/instruction "The system cannot find the file specified" identified as 
C:\Users\Owner\Appdata\Local\Temp\7zS2780\Setup\.\Setup\blocksysuserins...
and the process continues in an infinite loop.
That means that my HP Photosmart C6380 in Windows 7 will be useless during an infinite time. 

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Installing HP Solution Center for HP Photosmart Plus B209a in Windows 7

    HP Photosmart Plus B209a
    Having trouble reinstlling full software for this printer.  PS_AIO_06_B209a-m_USW_Full_Win_WW_140_175-4
    When I click on "Install" in a few seconds I get an error message that says, "the system sannot find the file specified" which is
    "C:\Users\username\AppData\Local\temp\7zS2780\Setup\...\Setup\hpzpnp40.exe
    I have the original CD as well as downloaded up to date copies of the software.

    Hi,
    Please try these steps
    From Original installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_L4 (exe or Bat)
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71739-4&cc=us&dlc=en&lc=en&...
    10. Run the download to reinstall the printer
    If software was downloaded and extracted to your system:
    1. Type %temp% in the run field
    2. Look for, and open the folder starting with 7z (Example: 7zS2356)
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_L4 (exe or Bat)
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Run the download to reinstall the printer
    Hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Fatal error during installing HP Solution Center for Deskjet F2180

    Hi everyone!
    During installation of HP Solution Center for Deskjet F2180 it says "fatal error" - couldn´t write the key to " \SOFTWARE" plus "MSI.GPBaseService2" error.
    I tried many times to completely uninstall all this software and delete keys in regedit and reinstall it. I also respected the order: firstly install, after that connect printer. HP Digital Imagiing Monitor is working right but iťs insufficient for me. Maybe there will be some problem with permissions in Windows, who knows. I have just installed Windows 7 Professional 32-bit.
    Could you help me to solve it, please? Each response pleases!
    This question was solved.
    View Solution.

    Welcome to the forums @MuzikizuM 
    I read your post about the installation error you are seeing for our Deskjet F2180. I would suggest trying out the steps in the guide below. Hopefully this will allow you to install the printer successfully!
    A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    Let me know the results
    Have a great day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • 2 Attemps to install HP Solution Center for printer on HP Pavilion failed. ScreenShots

    I had to do a factory recovery recently. I can print with the HP C7280 without problem from programs. I have had this printer and Solution Center working on this pc prior to the factory recovery and another pc before that.  I have tried now to install my HP Printer All in One Printer Solution Center now twice with fails. I hope the screenshots help.
    I have 1) downloaded a new full install - 2) turned off all antivirus - 3) rebooted and restarted the HP Printer - 4) made sure all windows updates have been applied for windows 8.1 - 5) tried following the solutions HP provided but still with fail. The install goes all the way through until the very last "configuring device" ... and then times out. Thank you for any help.
    I ALWAYS KUDO AND MARKED SOLVED. IT'S THE RIGHT THING TO DO ... doncha know. ":-D
    Look to the left and click on the STAR for a KUDO
    Look to the right and see OPTIONS to mark ACCEPT AS SOLUTION. Thanks!

    Hi @lacarottess,
    Welcome to the HP Forums!
    I noticed that you are looking for the HP Solution Center software for your HP Deskjet F2290 and HP Scanjet 2300c. I am happy to look for this for you!
    For your HP Deskjet F2290 printer: the HP Solution Center is found in the full feature software and drivers found at this website, HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver, or you can use the HP Printer Install Wizard for Windows (recommended).  
    For your HP Scanjet 2300c: I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • 2 Attemps to install HP Solution Center for printer on HP Pavilion failed. ScreenShot​s

    I had to do a factory recovery recently. I can print with the HP C7280 without problem from programs. I have had this printer and Solution Center working on this pc prior to the factory recovery and another pc before that.  I have tried now to install my HP Printer All in One Printer Solution Center now twice with fails. I hope the screenshots help.
    I have 1) downloaded a new full install - 2) turned off all antivirus - 3) rebooted and restarted the HP Printer - 4) made sure all windows updates have been applied for windows 8.1 - 5) tried following the solutions HP provided but still with fail. The install goes all the way through until the very last "configuring device" ... and then times out. Thank you for any help.
    I ALWAYS KUDO AND MARKED SOLVED. IT'S THE RIGHT THING TO DO ... doncha know. ":-D
    Look to the left and click on the STAR for a KUDO
    Look to the right and see OPTIONS to mark ACCEPT AS SOLUTION. Thanks!

    Hi,
    Please download the following software and drivers, save on your computer (remember where) and double click the downloaded file to install:
      http://ftp.hp.com/pub/softlib/software12/COL31995/mp-109977-2/OJ_AIO_J6400_Full_Win_WW_140_408-4.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Unable to install Solution Center for HP Photosmart C4780 in win 8.1 64 bit

    When i first tried to install the full software from HP, the installantion hung an i had to abort. Since then, i keep getting  a runtime error:
    Program: C:\Users\(my username)\AppData\Local\Temp\7zS0615\Setup.exe
    This application has requested the runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.
    I contacted HP support and the tech was able to help me instal basic driver for the printer, but I cannot use the full featers (scan for example).
    I tried using the HP Install Wizard from the website, it recognized the printer in my network (wifi) and indicated that there was a prolem and that I needed to install the full software, it then proceeded to download the s/w but upon trying to run it, I got the same error again. Help anyone?
    Thanks!
    This question was solved.
    View Solution.

    Hello, 
    Try the below steps to uninstall the existing printer entries and software.
    //Note: Make sure the printer is not connected to the PC through USB.
    press Win key + R  to open up an RUN window.
    in RUN window, type in  %temp% 
    a Temp window would open, and you'd see a list of folder name begining with 7z...
    Open the one, that has the printer name  in it, and locate for the folder name UTIL > CCC , 
    then locate for Uninstall L3.bat and double click on it to run it.
    After the uninstallation is completed, Restart the PC.
    Now run the HP Printer Install Wizard to install the printer s/w.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • I have an HP Photosmart C4680 and I´m truing to install the Solution Center program but I can´t

    I found this very helpful forum and I found a link to download the HP Solution Center for HP Photosmart C4680. 
    My laptop is a  Samsung Core I3, Windows 8, 64bits. I was able to download the program (I found the link in the forum, thanks) but when I installed it a pop up window appears and there it says, click on the install button to get started, but the only button I see is EXIT.  When I downloaded the program I saw it was updated only until Windows 7, is that the reason why I can´t use it? I really need to see the ink levels of my cartridges. Please, help

    Hi,
    Please run and follow the HP PRinter Install Wizard tool below to automatically locate the correct driver for your system and check for any difference while installing the software:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=mp-115766-2&cc=us&dlc=en&lc=en​...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Solution Center for Photosmart 2575 All-in-One

    Hi,
    I have changed laptop, and can't find the disc, with the software for the printer.
    I neew to install HP Photosmart Solution Center for Windows 7, and my printer is a 2575 All-in-One.
    Could you please send me a link to download this software.
    Thanks.
    Hanne.

    Hi, here is the link for the driver.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Cannot download Solution Center for Off Jet 6500 Wireless since going to Windows 8.1

    I get a failure message and am unable to download HP full feature software (a.k.a. the "solution center") for my HP Officejet 6500 Wireless on my Aspire E1-571-688 Laptop.   The solution center was successfully downloaded when I got the laptop in August 2013.  It was running fine until I upgraded from Windows 8 to 8.1. 
    When I discovered that the solution center would not run, I removed the printer and driver software beofre trying to reinstall.  When trying to get the Solution Center back, I can't get past the download step because during download it "fails".  I was able to download "drivers only" through the "add a printer" option, and I do have printing capability, however I am unable to use the scan function from the laptop (or directly from the 6500).
    Weird that I can't get the scan function to work on the unit itself (I get the "no scan options" message when trying to do so) as I have confirmed mutliple times that the printer is successfully connected to the correct network.
    Help please!  Thank you
    Geo48

    Geo,
    Welcome to the HP Forum.
    You will not have access to the full features of the printer software until you manage to install the Full Feature Software.  Scanning is one of those functions.
    The initial Connection to the Internet is indeed part of it -- you need a reliable, clean, consistant connection that will allow you to download the full data file.  Your connection may be dropping out part way through.
    You may need to upgrade your network drivers after the Upgrade to Windows 8.1 .  There are other issues can can plague a system after the Upgrade, most are well documented at this point.  You can check with your system's Forum to what others are saying.
    Basic Drivers only are much smaller in size -- just a few MBs.
    Random Thoughts..
    You need to resolve the network issues so you can download the full software.
    You might have a friend download the file onto his computer and transfer the file to your system using a USB stick.  This does not fix your network problems but it does solve at least the issue of not being able to get a hold of the installation package.
    You might try taking the computer to a friend's house -- if the issue is not within your computer's network setup, then the Upgrade may have "upset" the relationship between the computer and your home network.
    Click the Kudos Thumbs-Up to say Thank You for the help." .
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • HP solution center for window vista 32 bit and HP 6210

    need to download Solution Center for HP office jet 6210 and Windows vista 32 bit. Any help would be appreciated.

    Hi mary1929,
    HP Solution Center is the main software program that you use to control and maintain HP printers that use version 13 and 14 software. Your printer uses a version of software that came before version 13 and 14. I believe you have something called HP Director. HP introduced HP Solution Center to replace HP Director in 2004.
    I did find a document that says you may be able to install software for Vista that includes Solution Center. Please take a look at the information in this document; HP Director and Windows Vista Compatibility. If you recently upgraded to Windows Vista, you will not be able to use HP Director. However, you might be able to upgrade to HP Solution Center in its place.
    This might be the software you need; File name: AIO_CDB_Full_Non-Network_enu_NB.exe
    I hope this helps. If this does resolve the issue please let me know, if you have any additional questions, don't hesitate to ask.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to download hp solution center for windows 8.1 on officejet j6480 all in one

    I would like to install HP Solutions Center on my new HP computer which has Windows 8.1.  My printer is HP Officejet J6480 all in one.

    Hi,
    Please download the following software and drivers, save on your computer (remember where) and double click the downloaded file to install:
      http://ftp.hp.com/pub/softlib/software12/COL31995/mp-109977-2/OJ_AIO_J6400_Full_Win_WW_140_408-4.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Downloadin​g HP Solution Center for Windows 7 Profession​al 64-b

    I mistakenly uninstalled the HP Solution Center for my HP Officejet pro L7680 All-in-one printer.  My operating system is Windows 7 Professional 64-bit. I've been unable to locate a reliable download.  Any assistance will be appreciated.

    Hello love2travel1960 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues finding the installer.  I would like to help.
    I would recommend downloading and installing the HP Officejet Pro Full Feature Software and Drivers.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Problem with Lenovo Solution Center for Windows 8.1

    Hi,
    I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
    (I installed it with the necessary administrator priviledges.)
    But it didn't work. 
    I am getting the following error message. 
    Can anyone help me with this problem. Thanks in advance.
    Best regards,
    Jens.

    This one?
    http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
    Cheers.
    If I helped you, please give me some kudos! ^^

  • Can't log into eprint center for my photosmart 210b

    I can't log on to eprint center for my photosmart 210b and there is no place to select "forgot password" . My password doesn't work.

    WHY AM I HAVEING TROUBLE SIGNING INTO MY ACCOUNT CAN SOMEONE HELP

  • Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

    Hi folks,
    I've searched many threads and found some directions to remedy this, tried them and have had no luck.
    I'm running Windows 7.  All updates are current.  When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center stopped working.
    Uninstalled all HP software to reinstall.  I was only able to reinstall HP Update.  I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center.  The installation stops abruptly after "installing updates".
    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
    What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
    Thanks,
    Alex
    This question was solved.
    View Solution.

    Hi jerseyal,
    I hate to hear you are having issues.  What suggestions have you tried?  Did you get an error when installing?  How are you connecting the device?  Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
    If you are still experiencing the issue the steps below may help resolve it. 
    Try using the scrubber built into the software, then reinstalling from the current download available on the website. 
    From original printer installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Use the following tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    10. Download the full feature software and drivers Driver Link
    11. Run the download to reinstall the printer
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    3. Once the download is done extracting, cancel the download. Driver Link
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use the following tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers Driver link
    15. Run the download to reinstall the printer
    Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

Maybe you are looking for