Installing Hyperion Home to D: from C: drive puts Icons on C: Start Menu

Here is an unexpected outcome. I installed EPM11 on a new partition D: with Windows Server 2003. I ran the install from the C: pointing the Installer to D: to create the Hyperion Home. Well the installation put the files on D: but running it from C: caused the registry entries and the Startup Menu to land on the C: interface. I wanted everything on the D drive. Running from C: was a mistake. Don't do it if you want Start menu on the new O/S

Sorry, I could not help you here with Hyperion installations on Windows. If you were able to find the right Forum for this topic, please provide the link here.
Thank you,
Farouk

Similar Messages

  • Is it possible to install my home folder on an external drive?

    I need to hand my MacBook in for repair, but I don't want any of my documents on it when it goes in to the repair shop. I have full Time Machine back-ups of the entire laptop, but is there any way I can install my home folder on an external drive so that while my laptop is being repaired I can continue working as usual with my external hard drive plugged in to another (older, smaller hard drive) laptop?

    Get an empty external drive properly formatted. Get Carbon Copy Cloner 4.0 and use it to backup your Home folder to this external drive. Create a new admin user account and turn off auto login if it is enabled. Reboot the computer and sign into the new user account. Delete your user account.

  • How to install windows 7 in bootcamp from flash drive os x 10.9.1

    How to install windows 7 in bootcamp from flash drive os x 10.9.1

    oooHideooo wrote:
    It DOESN'T WORK!!
    I tried tonnes of method already, and the apple guide method absolutely doesn't work for MacBook Air, 10.9.1
    Did you even tried it yourself????!! with Maverick 10.9.1 you will NOT be able to get pass the bootcamp first page:"install window 7". It will give an error msg saying "The installer disc could not be found"
    My usb confirmed bootable! I created it with bootcamp, and tested it on a different macbook and it works. But doesn't work on MacBook Air. (Even startup disk doesn't detect it as bootable in Air)
    anyone else has a real solution to this problem?
    Thousands have successfully tried it themselves and installed Windows on a Macbook Air. Perhaps if you provided some details about what you did and what errors you observed we could help you. The Boot Camp instaructions, if followed, will produce a successful install.

  • Can I install 10.6 OS X from USB drive? Imac 2008 24"

    Can I install 10.6 OS X from USB drive? Imac 2008 24"

    Welcome to the Apple Support Communities
    You can, but it's a bit difficult because you have to copy the Snow Leopard disc content to a USB drive. There are a lot of pages which have got the steps to install Mac OS X Snow Leopard from the USB drive, like this page > http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html

  • After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

    After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

    Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

  • Unable to install Dreamweaver CS6 Upgrade ! from Hard Drive DUMP - Error : Adobe Genuine Software Verification Failure

    Hello,
    I am Unable to install Dreamweaver CS6 Upgrade  from CS4  from Hard Drive DUMP -
    Error :Installation Failed
    Adobe Genuine Software Verification Failure
    The product you are trying to install is not an adobe Genuine Software and appears to be counterfeit.
    Can any one help me with this issue. I earlier installed it from DVD but, i am unable to find DVD. I have a copy of full DVD Dump in network.
    Can someone help me fix the issue.
    Note: I have installed Dreamweaver CS4 with serial number.and am trying to install upgrade over cs4.
    Please help.
    Thank you,
    Sin

    It was because i was installing directly from network dump.
    I've managed to install and register software.
    Thanks and my problem is resolved.

  • Backup of all adobe programs, reinstalled my mac, installed maverick. transferred adobe premiere from backup drive to new osx. error message on startup. error: 16

    What to do?

    delete everything your moved.
    then clean and properly install your adobe programs, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How would I set the LabVIEW Execution Display.vi to automatically run a sequence from a desktop icon or the Start Menu Launcher.vi

    LabVIEW does not support command line arguments. Are there some modifications to the Execution Display.vi that would enable this behavior?

    Hi,
    This mods is to the LabVIEW OI supplied with TS2.0.1 and labVIEW 6.1
    In the TestStand - Runtime Operator Interface.vi, the cmdline is obtained and the full path to the sequence file is stored in a global variable. When the Sequence Display is launched and the case First Time is executed. The cmd line global is checked for an empty string, if its not then the string is concatated with the string 'Open Sequence File - No Prompt|' and put on the message queue. This will result in the sequence file being opened.
    The cmd line parsing is pretty basic. the argument is nothing or the full pathname to the sequence file.
    If this is what you are after then send your email to [email protected]
    I tried to attach the vi's but I am having some problems with thi
    s. Probably a size restriction.
    Hope this helps.
    Ray Farmer
    Regards
    Ray Farmer

  • Mail Icon from STart menu has wrong user info

    we set up the new 400 pavilion slimline pc, and see an incorrect user name in the start menu.  first question is how to change that.  next, when we click on the Mail icon, a different user name appears (what appears is username and password request info that was sent from my work pc to this home pc as a means of testing and practise for the homeowner to access mail)  it's like the home pc took over my work username info and installed it in the Mail icon set up!
    in sum, how can we change what first appears as an incorrect user name, and set up the correct user name on the Mail icon prompt.     the home owner can access and get mail, so that works fine but we added the comcast account link into 'favorites' folder as a means to connect into her mail.  we naturally want to make this easier by just selecting the Mail icon off the Start menu.  thanks! tc17

    Hello tc17,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are looking for chagne the profile username as well as the mail username on your HP 400 Pavilion Slimline computer. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • PS CS6 install doesn't create Win7 start menu shortcut

    I just did a PS CS6 install, but just the x64 application. The install created an Adobe ExtendScript Toolkit CS6 shortcut in the base Windows\Start Menu\Programs folder, but it didn't create a shortcut (or folder+shortcut) for Photoshop. I created my own shortcut, but figured I'd report this.
    Windows 7 x64 system.

    Actually I'm now seeing shortcuts for four new Adobe apps in Start Menu > Programs. The ExtendScript Toolkit CS6 is the only one that shows up in the base Start Menu with red highlighting to indicate a newly installed application. I didn't see the other new shortcuts until I rebooted my system this morning.
    The installed folder for each of the four new shortcuts is:
    C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    Shortcut names are:
    Adobe Photoshop CS6 (64 Bit)
    Adobe Bridge CS6 (64bit)
    Adobe Extension Manager CS6
    Adobe ExtendScript Toolkit CS6
    Adobe is inconsistent with where shortcuts are created. I have several Adobe application shortcuts in Start Menu\Programs but I have a couple in a Start Menu\Programs\Adobe folder and the entire CS5 suite's shortcuts in Start Menu\Programs\Adobe Master Collection CS5
    The shortcuts I manually created for Bridge CS6 x64 and Photoshop CS6 x64 are on my desktop and have different names than the ones created by the install.

  • I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

    I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

    If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
    Install from scratch and apply all updates manually.
    Please do a forum search.  I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
    Bottom line:  the Adobe auto updater is utterly useless in CS5 and prior versions.  You need to download the updates and apply them manually yourself.
    I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

  • After SN install can't launch Disk Utility from external drive

    I recently upgraded 10.5.9 to SN on my white Macbook. First I used Carbon Copy Cloner to clone the old drive onto the replacement drive in an external enclosure. Then I swapped drives so that the new drive is now the internal drive and the old drive is in the enclosure. I then upgraded the OS on the internal drive via SN installer on DVD.
    Now when I start from the external drive in OS X 10.5.9 and try to launch Disk Utility from this drive I get a weird error message that "Disk Utility can't be launched because it's incompatible with this architecture." The only things I can think of is that Snow Leopard installs something that globally effects all perhipherals (like new disk drivers?), or that there is something in the enclosure's USB bridge which is causing this, or that installing Snow Leopard breaks the PRAM for older versions of OS X. Tech support for the enclosure vendor tells me there is nothing in the enclosure's USB that would cause this. Any insights into what's happening appreciated.

    Thanks for response. Ah, that's it. I was trying to launch it from the applications folder I had dragged to the dock, which was done while running Snow Leopard. That's why (duh!) all the application icons were slashed out. : |

  • 2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
    If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
    Do you have a complete-drive backup of your old system?
    Matt

  • Mac Book Pro 15" mid 2009 after installing new hard drive and 8 gb memory, start up disk is still full, start up from power off is very slow, and programs open immediately after start up EX. word, excel.  Help?

    I installed a new 1tb WD hardrive in my mid 2009 macbook pro along with upgrading from 4gb to 8 gb.
    My start up disk is still almost full, booting up is extremely slow, and programs open up by themselves once booted up ex:word, excel.
    New TB drive shows up alng with 8 GB but, new hard drive not updating somehere?  What am I missing?  See screenshots below

    Thanks for the response, but I'm looking for answers to a few of the other answers before I look at completeing the steps above.
    1.  Whyis the new TB drive recognized in image 1 but still have the original 256GB size still recognized(and almost full) in image 1 also?  The HD should now be 1 TB, not 256 correct?  If this were the case, the HD, would only be fraction of full capacity,  Where is the disconnect between reconizing the installed tb HD but, it not being used?
    2.Image Number 2 shows once again that the new tb internal HD is recognized.  However, in image 3, the HD 256GB drive is still shown underneath the new HD.  Does this show that I am misssing something, some step, related to confirming the new HD should be fully reconized instaed of this old 256 that still remains?
    3.  In image 4, the SATA heading, shows the TB hardrive,  However, in image 5, the 256GB drive is still being shown under the storage heading?  Once again, seems like I've missed some simple step to make this all the same?
    4.Why is the start up from boot up soooo slow now.  I was never even close to this slow(slower than PC startup slow) before the new HD was installed.  IS this common when updraging to a new HD?  Doesn't seem right?
    5.  Why now all of a sudden when the computer finally boots up are certain programs automatically opening up, word, excel, when they have never opened up like this before?
    Summary:  1. New memory issues, 2. Very slow start up, 3.  Programs opening up automatically at startup.
    Until I address these issues, I'm not going to worry about loking through and deleting heavy folders.
    All responses welcomed!

  • HT1364 How to install iTunes, but access music library from external drive?

    I tried to install iTunes (11) on a new computer with Windows 8.  I keep the iTunes library on an external drive.  I tried to move the media files over to the newly installed iTunes within the hard drive program files, but it doesn't seem to work.  The relevant threads in the forum are a bit over my head (I am brand new to Windows 8, having leaped over from XP).  Is there some simple way to straighten out the paths on iTunes so that it will properly play songs from the external drive, show my old songlists, etc?
    I've now uninstalled iTunes from computer.  Would like to reinstall without too much headache ...

    Hello there FunkyMuzak,
    iTunes can be set to use the library on the external drive, and save new content.
    To have iTunes open the alternate library on the drive use this option:
    Steps to create or choose a different iTunes Library file
    If iTunes is running, quit iTunes.
    If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
    If you are using the Mac, open iTunes and immediately hold down the Option key.
    You should see one of the following screens:
    From: iTunes: How to open an alternate iTunes Library file or create a new one
              http://support.apple.com/kb/ht1589
    And to tell iTunes to save your new media when you buy songs or movies, etc., use this part of our article named Where are my iTunes files located? found here http://support.apple.com/kb/ht1391
    Discovering and changing the iTunes Media folder location
    Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
    Mac OS X: Click the iTunes menu and choose Preferences.
    Windows: Click the Edit menu and choose Preferences.
    Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
    You can then:
    Note where your media folder is, such as for backing up your media.
    Use the Reset button to reset it's location to the default (which is the iTunes folder).
    Click the Change button to select a folder for a new location. Once you change this location:
    If you make a new or alternate iTunes library, the new location will be used by that library.
    Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
    Cheers,
    Sterling

Maybe you are looking for