Installing iLife 09 gives a strange error
Hi All
I'm installing iLife 09 from the DVD when I put the disc in and the installer icon starts up in the dock after a little while, I get the error message...
"Operation could not be completed. (com.apple.installer.pagecontroller error-1)"
Does this mean the DVD is faulty ? (ie:- send it back)
I've tried the disc on both of my Macs and had the same message.
Never seen that before.
Any advice would be much appreciated
Cheers
Mark
Pop the DVD into your drive and run Disk Utilities and verify the disk to see if it is corrupt. If it is then take it back to the Apple store.
Similar Messages
-
So when i try and install it it givs me the error code 205, how do i fix it
so when i try and install it it givs me the error code 205, how do i fix it
Hi 123jasen,
I believe you are trying to download the Creative Cloud.
Please refer to the thread and help document below to where this issue stands resolved:
1. Re: Installing Creative Cloud-Error 205
2. Error downloading Creative Cloud applications
Regards,
Sheena -
I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.
I have exactly the same trouble.
If you wet the answer, please let me know!! -
Installing primavera then give's one error message
hi to all ,
I install primavera in my one system it is in network
i install primavera successfully then when i click on any icone then it's give the one message
Please Wait Window configure Primavera P6 version 7
each and every time this message came and it's take 2 min
each and every time i click on any icone or browser or any application run then before this application run same message came then after 2 min other application open
so is this primavera setting or some thing change in my system so please guide me for same
thanksI will try doing the initial download to another location on my computer. Again, though, I've downloaded to a certain place on my computer (all downloads go directly to my Desktop), then moved the files to another folder (Program folders, Adobe sub-folder) in order to try to install it there to see if it works there instead.
I've already defragmented my drive and removed stray temp files. I did this between either download 1 and download 2, or download 2 and download 3 (again, I've downloaded these files multiple times and have gotten the same results). -
NI 6624 counter card give a strange error code
I have a NI 6624 counter timer card which was counting pulses correctly in test mode. I set the card up using the following commands shown below. (Please note that I am coding in Delphi, so the syntax shown below might not be 100% correct.) However, I am 99% sure that the error is not caused by syntax).
DAQmxCreateTask ('Ctr1', myHandle);
DAQmxCreateCICountEdgesChan (myHandle,
'Dev1/Ctr1',
nil,
DAQmx_Val_Edge1_Rising,
0,
DAQmx_Val_CountDirection1_CountUp);
When I started using the card for counting gamma pulses rather than counting simulated pulses, I found that I needed to tune the filter. I tried to set the filter to 100 nanoseconds by adding the following to my previous code:
DAQmxSetCIFreqDigFltrEnable (myHandle,
'Dev1/Ctr1',
TRUE);
DAQmxSetCIFreqDigFltrMinPulseWidth (myHandle,
'Dev1/Ctr1', 1.0E-7);
The first of these new commands returned the error code FFFCF0FC - “ErrorAttributeNotSupportedInTaskContext“. The computer was programmed to abort if an error is received, so the second command was never executed. These commands are not included in the DAQmx documentation supplied to me, even though they are included in the C++ interface.
Can anybody tell me what this error code means and even better why it occurred?
Solved!
Go to Solution.Hi MartinVI,
Thank you for contacting National Instruments. I have been looking at this error message. This is caused by trying to assign a property to a device that does not support it. In this case it is caused by trying to assign the CIFreq property to a CICountEdgesChan. You will need to use the
DAQmxSetCICountEdgesDigFltrEnable
in order to set this property. When you installed DAQmx you should have a C Reference Help file which should detail many of the commands that you need to use. Generally, this is found at All Programs -> National Instruments -> NI-DAQ ->DAQmx C Reference Help
If there is no short cut, it should be located at C:\Program Files\National Instruments\NI-DAQ\docs
I have also attached a copy of the help file to this post incase you haven't got it installed.
Please let me know how you get on with this.
Many thanks,
Andrew McLennan
Applications Engineer
National Instruments
Attachments:
docs.zip 108 KB -
SQL statement gives a strange error
Hey!
We are running Oracle Database 10.2.0.2 x86_64 on SLES9
The statment is:
select distinct
p.PRIO_REF_NUM as "Prioriteet",
m.CODE as "Meede",
p.project_number as "Proj. nr.",
p.alternative_number as "Alternat. nr.",
p.project_name as "Proj. nimi",
i.type as "Ind. tüüp",
pi.indi_level as "Ind. level",
i.code as "Ind. kood",
i.name as "Ind. nimi",
pi.value_before as "Algväärtus",
pi.target_value as "Sihtmäär (arv)",
( select dv.text
from domain_value dv
where dv.DOMA_TYPE_CODE = i.CHOICE_DOMAIN
and dv.VALUE_CODE = pi.selected_choice
) as "Sihtmäär (tekst)",
( select avg( ip.CUMULATIVE_VALUE )
keep ( dense_rank first order by ip.report_date desc )
from PROJECT_INDICATOR_PROGRESS ip
where ip.PROJECT_INDICATOR_REF_NUM = pi.REF_NUM
-- väärtus raporteeritud enne kindlat kuupäeva
--AND ip.report_date <= to_date('15.10.2005', 'dd.mm.yyyy')
) as "Saavutusmäär",
( select ps.status_code
from project_status ps
where
ps.ref_num = (
select max(ps2.ref_num)
from project_status ps2
where ps2.project_ref_num = p.ref_num
and ps.project_ref_num = p.ref_num
) as "Projekti staatus"
from project p,
project_indicator pi,
indicator i
,measure m
,project_status ps
where p.ref_num = pi.PROJECT_REF_NUM
and i.ref_num = pi.INDICATOR_REF_NUM
AND m.REF_NUM = p.MEAS_REF_NUM
AND ps.PROJECT_REF_NUM = p.REF_NUM
AND ps.STATUS_CODE in ('ACCEPTED', 'FINISHED')
order by p.PRIO_REF_NUM, m.CODE, i.code;
And the error is ORA-03113: end-of-file on communication channel
Looked into alert log
ORA-07445: exception encountered: core dump [_intel_fast_memcpy.A()+10] [SIGSEGV] [Address not mapped to object] [0x2A97A67000] [] []
Searched metalink and google, but no help.
Any idea?This is likely an Oracle bug. You should contact Oracle support for this kind of errors.
-
Hi ...
Hi,
As per the instruction i need to do teh following:
Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
However, i can't find "Apple Mobile Device" in the Services !!!!
BR, -
while installing itunes, it gives me an error "there is a problem with this windows installer package. A program required for this install to complete could not be run. contact your support personnel or package vendor.".... what shall i do?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
Webkitgtk-svn installed great, but midori has weird error
I'm installing the midori web browser just to test it out and one of its dependencies was webkitgtk-svn and that installed fine, but when it came to installing midori i get this strange error.
==> Building and installing package
==> Making package: midori 0.0.16-1 (Wed Jan 30 10:36:36 CST 2008)
==> Checking Runtime Dependencies...
==> Installing missing dependencies...
error: 'webkitgtk-svn': not found in sync db
==> ERROR: Pacman failed to install missing dependencies.
Error: Makepkg was unable to build midori package.
and just to prove that webkitgtk-svn was installed correctly, here you go...
[jeff@gnome-box ~]$ tupac -Qi webkitgtk-svn
Name : webkitgtk-svn
Version : 29869-1
URL : http://webkit.org/
Licenses : custom
Groups : None
Provides : webkitgtk webkitgdk webkitgdk-svn
Depends On : libxslt curl sqlite3 gtk2 icu
Optional Deps : None
Required By : None
Conflicts With : webkitgtk webkitgdk webkitgdk-svn
Replaces : None
Installed Size : 5502.47 K
Packager : Unknown Packager
Architecture : i686
Build Date : Wed 30 Jan 2008 10:32:07 AM CST
Install Date : Wed 30 Jan 2008 10:32:35 AM CST
Install Reason : Installed as a dependency for another package
Install Script : No
Description : An open source web browser engine
Last edited by theringmaster (2008-01-30 16:50:39)byte wrote:
http://aur.archlinux.org/packages.php?d … 1&ID=11779
Read the comments.
http://aur.archlinux.org/packages/webki … n/PKGBUILD
Pacman 3.1.1 fix: provides=("webkitgtk=$pkgver" "webkitgdk=$pkgver" "webkitgdk-svn=$pkgver")
On that webkitgtk-svn pkgbuild, it says that "source=(LICENCE)" which gives back an error.
[jeff@gnome-box ~]$ cd ~/webkitgtk-svn
[jeff@gnome-box webkitgtk-svn]$ makepkg
==> Determining latest svn revision...
-> Version found: 29869
==> Making package: webkitgtk-svn 29869-1 (Wed Jan 30 10:55:16 CST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> ERROR: There is no agent set up to handle LICENSE URLs. Check /etc/makepkg.conf.
Aborting...
-> Downloading LICENSE...
/usr/bin/makepkg: line 473: LICENSE: command not found
==> ERROR: Failure while downloading LICENSE
Aborting... -
Installing J2SE v1.4.2_05 JRE "error reading setup initializing
I have a customer who just updated their OS on their computer from Windows 98 to XP and now they are trying to download the J2SE v1.4.2_05 JRE version of Java. In the installing process it gives them this error: "error reading setup initializing" Any suggestions as to what is going on? And how to fix it? Thanks!
SunForumsGuest wrote:
On windows there are two available installers.
Windows Offline Installation, Multi-language (j2re-1_4_2_05-windows-i586-p.exe, 14.91 MB), and the online installer: Windows Installation, Multi-language (j2re-1_4_2_05-<font face="tahoma,verdana,sans-serif" size="1" color="#000">windows</font>-i586-p-iftw.exe, 1.35 MB) .
In some situations, it may be necessary to use the first (larger) one, which (Ibelieve) includes the MSI installer., which usually will already be on an XP machine, but may not be ion an upgraded Win98 machine ?
(just a guess)
/DietzNow I got it, Thanks for your effort! -
Installed iLife 11 and can't open iPhoto
When I try to open iPhoto after installing iLife 11, I get the error that it cannot be opened because it is "damaged or is incomplete". What the???? I can't open iPhoto at all!
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name. On 10.6 those receipts may be found in the Finder using the Go menu and selecting Go To Folder
In the resulting window type
/var/db/receipts/
3. Re-install.
I dont know where everything is on the mac. also if i do this to resolve the iphoto problem will it remove all my pictures i had in there before? -
tried to install iLife "11 on my iMac 24 running OSX 10.6.8 but keep getting an error saying to contact software manufacturer. My iMac does have the Intel Core 2 Duo processor with plenty of space on it. Can anyone tell me wny I am getting this error and what I can do about it/
The latest iPhoto version you can run with 10.6.8 is 9.2.3. So you should be able to install iPhoto from the iLife 11 disk and update to 9.2.3.
Get the demo version of Pacifist and use it to install the iApps you need from the iLife 11 disk. See if that gets around the error.
However, the OP in this topic couldn't install iLife 11 on 10.6.8 and surmized after considerable searching that one needed 10.7.5: HT4411 iLife '11 System requirements?: Apple Support Communities.
I don't know if that's true or not. But the specs for iPhoto 9.2.3 give jus 10.6.3 as the minimum system. So using Pacifist should do the job. -
Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.
Hi Maarton,
Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
-Ankit -
Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XPUse these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/ -
Everytime I turn on iTunes it say it wasn't installed properly and can't burn CD's. However all my music is there for me to listen to on my iPod Nano.
I want to unistall iTunes and it allows me to go through the process until about 2% is waiting for uninstall and then I get an error message that says it couldn't complete the uninstall and gives me an error code of 2330.
Can anybody please help me. iTunes wants to charge $19.
Thank you.ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
Maybe you are looking for
-
Secondary monitor on 20"iMac, How to set portrait orientation when running
How do you set the display rotation in Windows XP? I have a secondary monitor (wall-mounted at 90 degrees to normal) that OS X handles just fine (the display preference window provides a rotate function). However, when running Windows XP, the seconda
-
Converting pdf to word Adobe Acrobat XI Pro trial
I am using a 30 day trial of Adobe Acrobat XI Pro, when I convert a pdf to word doc, it has several hidden letters & symbols, is this because it is a trial?
-
Oracle RDF / Joseki : issue with large literals
Hi, I have been using Joseki to query an Oracle RDF model. There seems to be an issue with large literals (according to a few unreliable tests, I would say this concerns literals around and over 4000 chars). Here are the two potential behaviours : Fi
-
I keep getting scripting errors since I upgraded adobe flash
This happens on almost every page every time since i updated adobe flash
-
I keep trying to change my Apple ID password but I can't get past the security questions. Is there another way to get thru because I don't remember my exact answer from 8 years ago.